Splitting the Sisu engine/GTA1030 Servicing on the left-hand side of the tractor 13. Remove the front mudguard. 14. Depending on the case: - either move the fuel tank apart; - or, if necessary, remove the fuel tank in the following manner: - previously drain it partially of its fuel, - mark and disconnect its fuel gauge harness and vent hose, - Remove the tank. 15. Remove the side engine reinforcement. 16. Mark then disconnect: - The lubrication pipes/hoses (1) located on the cab front firewall (Fig. 3). These pipes/hoses allow for oil flowing between the cooler and the rear axle right-hand hydraulic cover; - the rigid pipes (1) (Fig. 4) (pressure, return and LS) to the suspended front axle (if fitted); - the rigid pipes (2) (Fig. 4) to the front linkage (if fitted). - the gas-oil supply and return hoses on the engine. Block their openings.
1
1
Fig. 3
MA-02-05127A
MA-02-05113A
1
Massey Ferguson 6400 - Issue 4.a
¤ H
2
Fig. 4
2B21.5