Splitting - Perkins Engine / GBA20 Gearbox Final operations Remark Final operations are not especially difficult. They should be carried out in the reverse order to preliminary operations. However, it will be necessary during reassembly to carry out the tightening torques, adjustments and tests described below. Tightening torques As required: • Front cab attachment screw (see chapter 12). • Screw (2) of connector (1) on main wiring harness (Fig. 5 and Fig. 12) 2.82 to 3.15 Nm Topping-up of coolant to the maximum level marked (radiator, expansion tank. Fig. 13).
Fig. 12
Tests - air conditioning system (if fitted – see chapter 12). - Cab suspension (if fitted, see chapter 12). - All mechanical, hydraulic, electrical and electronic functions concerned by servicing. Checking tightness - Hydraulic unions. - Bleed screw on control unit of suspended front axle (if fitted).
Fig. 13
Massey Ferguson 6400 - Issue 2
¤ H
02B01.11