Splitting - Front frame / Sisu engine
A . General The front frame and engine must be disassembled when the assemblies need to be replaced, or when servicing is necessary on one of the mechanical elements located at the front of the engine. Remark This section presents a general disassembly procedure. Before and during disassembly, check that all connections have been properly separated between the fixed assembly and mobile assembly
B . Disassembling Preliminary operations
Fig. 1
1. Put on the handbrake if necessary. Remark Putting on the handbrake is optional because the Park Lock mechanism (option) automatically immobilises the tractor when stationary. 2. Ensure that the suspended front axle (if fitted) is in raised position and position chocks between the upper control arm and front axle housing (Fig. 1). Remove the bleed screw from the control unit (see chapter 9). 3. Remove the lateral panels from the engine and bonnet.
Servicing under the tractor 4. Remove the guard and the 4WD shaft located under the engine.
02A02.2
¤ H
Massey Ferguson 6400 - Issue 1