2-12
PERIODIC MAINTENANCE
BRAKES Inspect initially at 1 month and every 3 months thereafter. BRAKE PADS • Remove the front wheels. (7-10) The extent of brake pad wear can be checked by observing the limit line 1 on the side of brake pads. When the wear reaches the limit line, replace the pads with new ones. (7-18) Replace the brake pads as a set, otherwise braking performance will be adversely affected.
BRAKE SHOES This vehicle is equipped with a brake lining wear limit indicator on the brake panel. At the condition of normal lining wear , an extended line from the index mark on the brake camshaft should be within the range embossed on the brake panel with the brake on. To check wear of the brake lining, perform the following steps. • Make sure the brake system is properly adjusted. • Operate the brake, to check if the extension line from the index mark 1 is within the range 2 indicated on the brake panel. • If the extension line is outside the range, the brake shoe assembly should be replaced to ensure safe operation. (7-46 to 7-52) REAR BRAKE PEDAL AND LEVER The procedure for adjusting the rear brake pedal and brake lever is as follows: NOTE: First adjust the brake pedal and next adjust the brake lever. Brake pedal Check that the brake pedal play A is within the specified range. If the play is not within the specified range, makes adjustments. Brake pedal play A: 20 – 30 mm (0.8 – 1.2 in)