VALVE CLEARANCE ADJUSTMENT
INSP ADJ
S Install the new valve pad 1 and the valve lifter 2. NOTE: S Apply molybdenum disulfide oil to the valve pad and the valve lifter. S The valve lifter must turn smoothly when rotated by hand. S Install the valve lifter and the valve pad in the correct place. S Install the exhaust and intake camshafts, timing chain and camshaft caps. Camshaft cap bolt 10 Nm (1.0 mSkg, 7.2 ftSlb) NOTE: S Refer to “CAMSHAFTS” in CHAPTER 4. S Lubricate the camshaft caps, camshaft lobes and camshaft journals. S First, install the exhaust camshaft. S Align the camshaft marks with the camshaft cap marks. S Rotate the crankshaft clockwise several turns to seat the parts. S Measure the valve clearance again. S If the valve clearance is still out of specification, repeat all of the valve clearance adjustment steps until the specified clearance is obtained. 6. Install: S Cylinder head cover Refer to “CAMSHAFTS” in CHAPTER 5. 7. Install: S All removed parts NOTE: For installation, reverse the removal procedure. Note the following points.
2-13