FUEL LINE INSPECTION/COOLING SYSTEM
INSP ADJ
FUEL LINE INSPECTION 1. Remove: S Intake silencer Refer to “CARBURETORS” in CHAPTER 7. 2. Inspect: S Fuel hoses 1 S Fuel delivery hoses 2 Cracks/damage ! Replace. 3. Install: S Intake silencer Refer to “CARBURETORS” in CHAPTER 7.
COOLING SYSTEM Coolant replacement NOTE: The coolant should be changed at least every season. 1. Place the machine on a level surface. 2. Remove: S Intake silencer Refer to “CARBURETORS” in CHAPTER 7. 3. Remove: S Coolant filler cap 1
WARNING Do not remove the coolant filler cap 1 when the engine is hot. Pressurized scalding hot fluid and steam may be blown out, which could cause serious injury. When the engine has cooled, place a thick rag or a towel over the coolant filler cap. Slowly turn the cap counterclockwise until it stop. This allows any residual pressure to escape. When the hissing sound has stopped, press down on the cap while turning it counterclockwise to remove it.
2-4