TIMING CHAIN b. c.
Insert suitable tool into the notch at the top of the front timing chain case as shown (1). Pry off case by moving the tool as shown (2). ● Use seal cutter [SST: KV10111100 (J37228)] to cut liquid gasket for removal. CAUTION: ● Do not use screwdriver or something similar. ● After removal, handle front timing chain case carefully so it does not tilt, cant, or warp under a load. SEM156F
21. Remove O-rings from rear timing chain case.
PBIC3570E
22. Remove water pump cover and chain tensioner cover from front timing chain case. ● Use seal cutter [SST: KV10111100 (J37228)] to cut liquid gasket for removal. 23. Remove front oil seal from front timing chain case using suitable tool. ● Use screwdriver for removal. CAUTION: Be careful not to damage front timing chain case.
EMQ0032D
24. Remove timing chain tensioner (primary) as follows: a. Remove lower mounting bolt. b. Loosen upper mounting bolt slowly, and then turn timing chain tensioner (primary) on the mounting bolt so that plunger is fully expanded. NOTE: Even if plunger is fully expanded, it is not dropped from the body of timing chain tensioner (primary). c. Remove upper mounting bolt, and then remove timing chain tensioner (primary). PBIC3562E
Revision: 2005 July
EM-74
2005 G35 Sedan