HYDRAULIC, PNEUMATIC, ELECTRICAL, ELECTRONIC SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM
15.
16.
Tilt the swash plate up and insert the push rod (1), down and into the socket. Make sure the push rod is engaged in the socket correctly.
1b0o2004061062
14
70-421-473
15
70-421-972
16
Install the stroke control piston (2), in the bore. Screw the plug (1), back on.
Pumping Head and Piston Assembly 17.
Install the guide pins (1), in the block splines.
MAXXUM-T3-DRAFT 02/11/2011
A.10.A / 92