HYDRAULIC/HYDROSTATIC SYSTEM (CONT'D) Replacing Hydraulic Fluid And Case Drain Filters (Cont’d) Figure 10-110-8
1
P-37663
Remove the hoses from the attachments case drain filter (Item 1) [Figure 10-110-8]. Remove and discard the filter. Install a new filter, tighten the hose fittings and install the cover. Add the correct fluid to the reservoir until the fluid level is at the center of the sight gauge. (See Checking And Adding Fluid on Page 10-110-1.) Lower the operator cab. Start the engine and operate the loader hydraulic controls. Stop the engine. Check for leaks. Check the fluid level in the reservoir and add as needed.
10-110-3
T300 Bobcat Loader Service Manual