STOPPING LOADER
THE
ENGINE
AND
LEAVING
THE
Procedure Stop the loader on level ground. Fully lower the lift arms and put the attachment flat on the ground.
NOTE: Activating the Password Lockout Feature on machines with the Deluxe Instrumentation Panel allows operation of the loader without using a password. (See Password Lockout Feature on Page 60-190-2.) Figure 10-200-3
Figure 10-200-1
P-66667
Exit the loader using grab handles, safety tread and steps (maintaining a 3-point contact) [Figure 10-200-2].
P-31864
Pull the engine speed control fully backward [Figure 10200-1] to decrease the engine speed.
WARNING
Engage the parking brake. Figure 10-200-2
1
2 P-76603
P-66668
B-15553L
Turn the key switch to the STOP position (Item 1) (Standard Key Panel) or press the STOP button (Item 2) (Deluxe Instrumentation Panel) [Figure 10-200-2]. Lift the seat bar and make sure the lift and tilt functions are deactivated.
Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground. • Stop the engine. • Engage the parking brake. • Raise seat bar. • (Foot Pedal Controls) Move pedals until both lock. • (Advanced Control System-ACS) Move the hydraulic controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated. The seat bar system must deactivate the lift and tilt control functions when the seat bar is up. Service the system if hand controls do not deactivate. • (Selectable Joystick Controls-SJC) Move the joysticks to the NEUTRAL POSITION to make sure that travel and hydraulic functions are deactivated. The seat bar system must deactivate these functions when the seat bar is up. Service the system if controls do not deactivate. W-2463-0603
Unbuckle the seat belt. Remove the key from the switch (Standard Key Panel) to prevent operation of the loader by unauthorized personnel.
10-200-1
S160 Service Manual