TOWING THE LOADER
Figure 10-50-2
Procedure For Non-Two-Speeds
IMPORTANT Do not push or pull the machine at more than 2 MPH (3,2 km/h) or for a distance of more than 25 feet (7,6 meters) with the towing tool in place. I-2017-0389
1
To prevent damage to the loaders hydrostatic system, the loader must be towed only a short distance at slow speed. (Example: Moving the loader onto a transport vehicle). The towing chain (or cable) must be rated at 1 & 1/2 times the weight of the loader. (See LOADER SPECIFICATIONS (873) on Page spec-10-1 or See LOADER SPECIFICATIONS (883) on Page SPEC-11-1.) Figure 10-50-1
P-28038
•
Press the TRACTION LOCK OVERRIDE Button (Item 1) [Figure 10-50-2].
•
Tow the Bobcat at 2 MPH (3,2 km/hr) or less for not more than 25 feet (7,6 meters).
If the electrical system is not functioning, contact your Bobcat loader dealer.
1
P-21769B
•
Turn the key switch to RUN (Item 1) [Figure 10-50-1] (Standard Panel) OR press the RUN / ENTER Button (Deluxe).
10-50-1
873, 883 Bobcat Loader Service Manual