ENGINE LUBRICATION SYSTEM (CONT’D) Replacing Oil And Filter (Cont’d)
WARNING Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death. W-2103-1285
Figure 10-110-3
1
P1575
Put oil in the engine. (See Capacities on Page SPEC-104.), [Figure 10-110-3] (See Oil Chart on Page 10-110-1.) Start the engine and let it run for several minutes. Stop the engine and check for leaks at the oil filter. Remove the dipstick and check the oil level. Add oil as needed if it is not between the marks (Item 1) [Figure 10-110-3] on the dipstick. Install the dipstick and the fill plug. Close the rear door.
10-110-2
773 Bobcat Loader Service Manual