Front Differential/Rear Drive Lubricant
CAUTION
5. Separate the front of the snorkel housing from the rear; then remove the snorkel housing.
When changing the lubricant, use approved SAE 80W-90 hypoid gear lube. To check lubricant, remove the fill plug; the lubricant level should be 1 in. below the threads of the plug. If low, add SAE approved 80W-90 hypoid gear lubricant as necessary. To change the lubricant, use the following procedure. 1. Place the ATV on level ground.
2. Remove each fill plug.
6. Remove two reinstallable rivets and remove the splash guard. The radiator cap can now be accessed in front of the snorkels. 7. Carefully rotate the radiator cap counterclockwise to release pressure; then remove the cap.
3. Drain the lubricant into a drain pan by removing in turn the drain plug from each.
8. Add coolant as necessary; then install the radiator cap and access panel or snorkel housing.
! WARNING
CAUTION