2-32 PERIODIC MAINTENANCE Periodic Maintenance Procedures Engine Lubrication System Engine Oil Change
• Remove: Bottom Guard Bolts [A] Bottom Guard [B]
the vehicle so that it is level, both side to side and • Support front to rear after warming up the engine. the engine oil drain plug [A] to drain the oil. •○Remove The oil in the filter can be drained by removing the filter
• •
(see Oil Filter Change). Replace the oil drain plug gasket with a new one. Tighten:
Torque - Engine Oil Drain Plug: 20 N·m (2.0 kgf·m, 15 ft·lb)
• Pour in the specified type and amount of oil. Engine Oil Type:
API SG, SH, SJ, SL or SM with JASO MA, MA1 or MA2
Viscosity:
SAE 10W-40
Amount:
2.4 L (2.5 US qt) (When filter is not removed) 2.5 L (2.6 US qt) (When filter is removed) 2.6 L (2.7 US qt) (When engine is completely dry)
NOTE
○Although 10W-40 engine oil is the recommended oil
for most conditions, the oil viscosity may need to be changed to accommodate atmospheric conditions in your riding area.
• Install: Bottom Guard (see Engine Bottom Guard Installation in the Frame chapter)