SERVICE INFORMATION FOR ELECTRICAL INCIDENT < BASIC INSPECTION > 4. While moving the connector, check whether the male terminal can be easily inserted or not.
GI
B
C SEL272V
D
• If the male terminal can be easily inserted into the female terminal, replace the female terminal. E
F
G SEL273V
Waterproof Connector Inspection If water enters the connector, it can short interior circuits. This may lead to intermittent problems. Check the following items to maintain the original waterproof characteristics.
H
RUBBER SEAL INSPECTION
I
• Most waterproof connectors are provided with a rubber seal between the male and female connectors. If the seal is missing, the waterproof performance may not meet specifications. • The rubber seal may come off when connectors are disconnected. Whenever connectors are reconnected, make sure the rubber seal is properly installed on either side of male or female connector.
J
K
WIRE SEAL INSPECTION
• The wire seal must be installed on the wire insertion area of a waterproof connector. Be sure that the seal is installed properly.
L SEL275V
Terminal Lock Inspection Check for unlocked terminals by pulling wire at the end of connector. An unlocked terminal may create intermittent signals in the circuit.
M
N
O
SEL330V
Intermittent Incident
INFOID:0000000005267305
DESCRIPTION Sometimes the symptom is not present when the vehicle is brought in for service. If possible, re-create the conditions present at the time of the incident. Doing so may help avoid a No Trouble Found Diagnosis. The fol-
Revision: July 2009
GI-37
2010 Xterra
P