QUICK REFERENCE CHART MURANO
2010
FRONT WHEEL ALIGNMENT
ELS0003X
FOR USA AND MEXICO MODELS Item
Standard
Measurement wheel
Camber Degree minute (Decimal degree)
Left side
Right side
Minimum
–1° 00′ (–1.00°)
–1° 15′ (–1.25°)
Nominal
–0° 15′ (–0.25°)
–0° 30′ (–0.50°)
0° 30′ (0.50°)
0° 15′ (0.25°)
Maximum Left and right difference*1
Caster Degree minute (Decimal degree)
Minimum
3° 55′ (3.92°)
4° 15′ (4.25°)
Nominal
4° 40′ (4.67°)
5° 00′ (5.00°)
Maximum
5° 25′ (5.41°)
5° 45′ (5.75°)
Left and right difference*1 Kingpin inclination Degree minute (Decimal degree)
Total toe-in Distance Toe-in Toe angle (left wheel or right wheel) Degree minute (Decimal degree)
–0° 48′ (–0° 80′) - 0° 18′ (0.30°)
–0° 18′ (–0° 30′) - 0° 48′ (0.80°)
Minimum
12° 00′ (12.00°)
Nominal
12° 45′ (12.75°)
Maximum
13° 30′ (13.50°)
Minimum
In 0.5 mm (0.020 in)
Nominal
In 1.5 mm (0.059 in)
Maximum
In 2.5 mm (0.098 in)
Minimum
In 0° 01′ (0.02°)
Nominal
In 0° 03′ (0.05°)
Maximum
In 0° 05′ (0.08°)
Measure value under unladen*2 conditions. *1: A difference when I assumed the right side a standard (right side – left side = difference). *2: Fuel, engine coolant and lubricant are oil full. Spare tire, jack, hand tools and mats are in designated positions.
FOR CANADA MODELS Item
Standard
Measurement wheel
Camber Degree minute (Decimal degree)
Left side
Right side
Minimum
–1° 00′ (–1.00°)
–1° 15′ (–1.25°)
Nominal
–0° 15′ (–0.25°)
–0° 30′ (–0.50°)
0° 30′ (0.50°)
0° 15′ (0.25°)
Maximum Left and right
Caster Degree minute (Decimal degree)
difference*1
Minimum
3° 55′ (3.92°)
4° 10′ (4.17°)
Nominal
4° 40′ (4.67°)
4° 55′ (4.92°)
5° 25′ (5.41°)
5° 40′ (5.66°)
Maximum 1
Left and right difference* Kingpin inclination Degree minute (Decimal degree)
Total toe-in Distance Toe-in Toe angle (left wheel or right wheel) Degree minute (Decimal degree) Measure value under unladen*2 conditions.
–0° 48′ (–0° 80′) - 0° 18′ (0.30°)
–0° 18′ (–0° 30′) - 0° 48′ (0.80°)
Minimum
11° 55′ (11.92°)
Nominal
12° 40′ (12.67°)
Maximum
13° 25′ (13.41°)
Minimum
In 0.5 mm (0.020 in)
Nominal
In 1.5 mm (0.059 in)
Maximum
In 2.5 mm (0.098 in)
Minimum
In 0° 01′ (0.02°)
Nominal
In 0° 03′ (0.05°)
Maximum
In 0° 05′ (0.08°)