INTAKE MANIFOLD < ON-VEHICLE REPAIR >
INTAKE MANIFOLD
A
Exploded View
INFOID:0000000001547585
EM
C
D
E
F JPBIA1350GB
1.
Intake manifold
A.
Refer to EM-31
2.
G
Gasket
Refer to GI-4, "Components" for symbols in the figure.
H
Removal and Installation
INFOID:0000000001547586
REMOVAL
I
1. 2. 3. 4.
J
Release fuel pressure. Refer to EC-601, "Inspection". Remove intake manifold collector. Refer to EM-28, "Exploded View". Remove fuel tube and fuel injector assembly. Refer to EM-36, "Exploded View". Loosen mounting bolts in reverse order as shown in the figure to remove intake manifold with power tool.
K
: Engine front
CAUTION: • Cover engine openings to avoid entry of foreign materials. • Put a mark on the intake manifold and the cylinder head with paint before removal because they need to be installed in the specified direction. • Loosen mounting bolts from the inside of manifold to the outside. 5.
L
M JPBIA1352ZZ
N
Remove gaskets. O
INSTALLATION Note the following, and install in the reverse order of removal. INTAKE MANIFOLD
P
• If stud bolts were removed, install them and tighten to the torque specified below. : 10.8 N·m (1.1 kg-m, 8 ft-lb)
Revision: 2007 June
EM-31
G37 Coupe