LIFTING POINT < PRECAUTION >
LIFTING POINT Commercial Service Tools
INFOID:0000000001834620
Tool name
Description
Board on attachment
S-NT001
Safety stand attachment
S-NT002
CAUTION: • Every time the vehicle is lifted up, maintain the complete vehicle curb condition. • Since the vehicle's center of gravity changes when removing main parts on the front side (engine, transmission, suspension etc.), support a jack up point on the rear side garage jack with a mission jack or equivalent. • Since the vehicle's center of gravity changes when removing main parts on the rear side (rear axle, suspension, etc.), support a jack up point on the front side garage jack with a mission jack or equivalent. • Be careful not to smash or do not do anything that would affect piping parts.
Garage Jack and Safety Stand and 2-Pole Lift
INFOID:0000000001834621
WARNING: • Park the vehicle on a level surface when using the jack. Make sure to avoid damaging pipes, tubes, etc. under the vehicle. • Never get under the vehicle while it is supported only by the jack. Always use safety stands when you have to get under the vehicle. • Place wheel chocks at both front and back of the wheels on the ground. • When lifting the vehicle, open the lift arms as wide as possible and ensure that the front and rear of the vehicle are well balanced. • When setting the lift arm, do not allow the arm to contact the brake tubes, brake cable, fuel lines and sill spoiler.
Revision: 2008 September
GI-30
2008 G35 Sedan