Section 3 - Maintenance Routine Maintenance Front and Rear Axles
Front and Rear Axles Checking the Oil Level
!MWARNING Make the machine safe before working underneath it. Park the machine on level ground, lower the attachments to the ground. Apply the park brake, put the transmission in neutral and stop the engine. Block both sides of all four wheels. Disconnect the battery, to prevent the engine being started while you are beneath the machine. GEN-4-1_1
!MCAUTION The axle oil level must be checked with the machine level, otherwise a false indication of the amount of oil in the axle will be given. 16-3-5-3
1
Clean the area around fill/level plug 22-A.
2
Remove fill/level plug 22-A and its seal, oil should be level with the bottom of the hole.
3
Top up with the recommended oil if necessary.
4
Clean and refit fill/level plug 22-A and its seal. Tighten to 85 Nm (60 lbf ft).
Fig 22.
3 - 32
9803/4170-12
3 - 32