POWER TRAIN
3. Removing front wheels (1) Pull the parking brake lever and block the rear wheels. (2) Loosen the wheel nuts by two turns. Then, raise the front end of the truck using a hoist or the hydraulic system. (a) Hoisting Using a sling and eye-bolts at both ends of the cross member at the top of the outer mast, lift the front end of the truck with a hoist. (b) Using hydraulic system Tilt the mast fully backward and place wood blocks under the mast. Tilt the mast forward to raise the front end.
!
CAUTION
After raising the front end, place jack stands under the frame to prevent the truck from falling. 210757
(3) Remove the wheel nuts. (4) Remove the wheel. Truck Model Item
1 ton class
2 ton class
18 Ă— 7 - 8
200/50-10
Tire size of front wheels
Solid pneumatic tire
Solid tire
206920
4. Removing steps and floor plates (1) Steps (L.H., R.H.) (2) Step plates (L.H., R.H.) (3) Floor plate
(3) Floor plate B (1)
(1) (2)
Remove floor plate B.
Floor plate A
Disconnect the accelerator connector mounted on the back side of the floor plate, then remove floor plate A.
(2) 211153
3-2