Figure 10-61-29
REMOTE START TOOL (SERVICE TOOL) KIT 6689779 (CONT'D) Remote Start Procedure (Cont'd) Figure 10-61-28
1
2 P-34661
Push the couplers on the front auxiliary block toward the block and hold for five seconds to release the front auxiliary pressure [Figure 10-61-29].
P-76441
The gear icon with the left facing arrows (Item 1) [Figure 10-61-28] will illuminate and blink when the RUN key is pressed and the loader is communicating with the service tool. The computer icon with the right facing arrows (Item 2) [Figure 10-61-28] will illuminate and blink when the Remote Start Tool (Service Tool) is transmitting data to and from the computer. Loader S/N: xxxx60000 & Below NOTE: To relieve the pressure at the rear or secondary front auxiliary, (if equipped) press and hold the AUXILIARY PRESSURE RELEASE button on the left instrument panel for three seconds after the engine has stopped. Loader S/N: xxxx60001 & Above NOTE: To relieve the pressure at the rear or secondary front auxiliary, (if equipped) press the RUN button on the remote start tool. Then press the auxiliary (AUX) hydraulics button on the remote start tool and move the AUXILIARY Hydraulic Switch on the to the right and left several times.
10-61-7
S150, S160 Service Manual