Skarpenord – Company Brochure 2020

Preferred supplier of valve remote control systems

MARINE

OFFSHORE

SERVICE & SPARES

1

// INTRODUC TION

Welcome to Skarpenord Skarpenord AS is one of the leading providers of valve remote control systems for the marine and offshore industry.

With more than 40 years experience in the business, we deliver hydraulic actuators and complete valve remote control systems worldwide.

WWW.SKARPENORD.NO Skarpenord AS is one of several portfolio companies owned by Scana ASA. Scana ASA is an investment company listed on Oslo Stock Exchange.

Visit www.scana.no for more information.

2

SKARPENORD 2020

Content 4

CONCEPT & SEGMENTS

6

HYDRAULIC ACTUATORS

9

SOLENOID VALVE CABINET

10

HYDRAULIC POWER UNITS

11 COMPUTERIZED VALVE CONTROL 12

REFERENCES

14

SERVICE AND SPARES

3

// C ONCEP T & SE GMENT S

System is the key Skarpenord’s valve remote control systems are designed and optimized separately for both segments: marine and offshore.

The valve remote control system contains as a minimum of Hydraulic Power Unit, one Solenoid Valve Cabinet with various numbers of control circuits, and a number of actuator sizes and models.

Skarpenord range of product includes:

HYDRAULIC ACTUATORS SOLENOID VALVE CABINET HYDRAULIC POWER UNIT COMPUTERIZED VALVE CONTROL

FACTS The Hydraulic Power Unit (HPU) generates and delivers pressurized hydraulic oil to the Solenoid Valve Cabinet (SVC), which through solenoid valves distributes hydraulic pressure to valve mounted actuators, which opens and closes the valves.

The solenoids are usually controlled from a superior system, but can be controlled from a Skarpenord control unit as well.

The standard connection between valve and actuator is based on the ISO 5211 standard for top flange.

The actuators can be single acting with spring return or double acting with- or without mechanical locking of valve end position.

4

SKARPENORD 2020

OFFSHORE

CONTROL CABINETS

ACCUMULATOR SKIDS HYDRAULIC ACTUATORS

MARINE COMPUTERIZED VALVE CONTROL

HYDRAULIC ACTUATORS SOLENOID VALVE CABINET HYDRAULIC POWER UNITS

5

// HYDRAULIC AC TUATOR S

Hydraulic Actuators The hydraulic actuators are driven by pressured hydraulic oil and controls opening and closing of ball- or butterfly valves installed in the pipe system of the vessel or rig.

The Skarpenord hydraulic actuators are produced as single- or double acting type and can operate all ball- and butterfly valves. The design simplifies maintenance and installation, which gives the customer a cost-effective product.

Quarter turn actuators can be delivered with either adjustable stroke or fixed 90-degree rotation with mechanical locking*.

Actuators are made in Scotch-yoke design, piston type. Standard connection flange according to the ISO 5211. The material is nodular cast iron and carbon steel.

FACTS

*MECHANICAL LOCKING Skarpenord has delivered actuators with mechanical locking as standard on butterfly valves. RA models are equipped with a mechanical locking system in the end position of the stroke (open and close state). The mechanism is integrated in the actuator and totally independent of hydraulic oil pressure. If there is loss of hydraulic pressure, or even a fire, the valve will be kept safe in last position (open/close).

EASY MAINTENANCE The mechanical locking gives the feature of easy maintenance as well. The only regular maintenance we recommend on Skarpenord actuators, is changing of the seal kit. Because of the mechanical locking, the sealing can be replaced without any dismantling at actuator and valve. The actuator can remain attached to the valve and the valve does not have to be disconnected from the pipeline. The maintenance can be performed with the valve safely locked in fully closed or open position. Full flow can be maintained in the pipeline during maintenance.

EAL™ HYDRAULIC OIL Our Valve Remote Control (VRC) is also suited for use with various EAL™ hydraulic oil and can be used upon customers preference. This is premium quality, high performance hydraulic oils developed to meet the demand for environmentally acceptable hydraulic fluids.

Contact Skarpenord for compatibility check.

6

SKARPENORD 2020

HYDRAULIC ACTUATOR | SINGLE ACTING Type: 1/4 turn hydraulic actuator RE2 – Spring-to-close-action RF2 – Spring-to-open-action Max working pressure 220 bar Standard range torque up to 17800 Nm (Larger actuators on request) Service temperature -20 °C to +120 °C Use area: For dry and submerged use. For submerged type a seal connection kit is added.

HYDRAULIC ACTUATOR | DOUBLE ACTING Type: 1/4 turn hydraulic actuator RA2 – Mechanical locking RB2 – Adjustable stroke Max hydraulic working pressure 220 bar Actuator torque range 69–240000 Nm Service temperature std -45 °C to +120 °C All actuators can be coated on request depending on marine or offshore specification, or customer preference.

APPROVALS/STANDARDS DNV GL BV ABS CCS NK RMRS Others on request.

OPTIONS A wide range of accessories is available for our actuators: Local visual position indicator (Brass or AISI316) Indicator boxes for use in hazardous areas Connectors for emergency operation hand pump All actuators can be coated on request depending on marine or offshore specification.

DOCUMENTATION Skarpenord’s own engineering department has long experience in documenting systems which meets our customers quality standards. We offer two tiers of documentation packages: Skarpenord standard Based on customer SMDL

7

// S OLENOID VALVE CABINET S

Solenoid Valve Cabinets The Solenoid Valve Cabinet (SVC) contains solenoid operated directional valves for distribution of high pressure oil to the actuators.

Valve position can be measured indirectly and communicated to the Skarpenord computerized valve control system, or superior system.

CABINET WITH DOOR IN FRONT – SEPARATED ELECTRO-HYDRAULIC AND ELECTRIC SECTIONS Solenoid valves/others upon request 24VDC coils standard, others on request Solenoid valves mounted on manifold blocks in the rear of the cabinet Cable entrance through top or bottom side of the cabinet Hydraulic connections to actuators through back of cabinet Isolation valve and quick connectors for hand pump for emergency operation of the system Filter unit in pressure line

8

SKARPENORD 2020

9

// HYDRAULIC P OWER UNIT

Hydraulic Power Unit The Hydraulic Power Unit (HPU) with oil reservoir, hydraulic pumps and accumulator unit feeds the system with high pressure oil.

All components ensure high reliability and low noise.

HPU 120: 120l oil reservoir HPU 250: 250l oil reservoir Hydraulic working pressure 50–210 bar Other configurations upon request

Gearpumps, capasities 6,5 l/min or 8,3 l/min at 60 Hz One pump (selectable) in operation, one stand-by El. motors from 400 to 480 VAC, 50 or 60 Hz, from 1,8 kW to 2,6 kW at 60 Hz Isolation class F, IP55 Accumulators in various sizes Filter in return line

ALARM SYSTEM WITH SEPARATE WARNINGS AND ALARMS FOR:

Low oil level: Warning Low low oil level: Alarm and shutdown High oil temperature: Warning High high oil temperature: Alarm and shutdown High oil pressure: Warning Low oil pressure: Alarm El. motor fuse tripped: Alarm All warnings and alarms will be reflected in a NC dry contact common alarm

OPTIONAL

Remote control panel Serial computer interface, several protocols available Hardwired computer interface Other accumulator sizes and pump sizes on request High oil pressure: Warning Low oil pressure: Alarm El. motor fuse tripped: Alarm All warnings and alarms will be reflected in a NC dry contact common alarm

10

SKARPENORD 2020

// C OMP UTERIZED VALVE C ONTROL

Computerized Valve Control The Skarpenord Computerized Valve Control is a centralized system for control/monitoring of valves and Hydraulic Power Unit.

The valve remote control functions are carried out via customized mimics on the screen.

The operation is conducted on a touch screen or by track ball/keyboard. The solution minimizes the need for cabling between the different units.

The Control Station (PC), Logic Controller (PLC) and Operator Panel in the SVC are interconnected by a bus cable. This will simplify the installation work.

All control components are produced by renowned companies with worldwide technical support.

VALVE CONTROL STATION FOR CONTROL ROOM Control computer station with onscreen mimics Pointing device or touch screen to activate any valve

bus cable

Position/status indicated on mimic Remote control/monitoring of HPU Pump control/monitoring from the onscreen mimic Connection to data from external systems Easy installation bus cable

11

// REFERENCE S

Reference projects The retrofit market is one of the important market segments for our company. These types of projects demand knowledge, experience and skills of the technical personnel both during the design stage and during the installation and commissioning.

We are proud to show our references, both retrofit and new projects:

SKARPENORD SCOPE OF SUPPLY

NJORD A & B A: 4 Hydraulic Power Units, 4 electro hydraulic control panels B: HPU upgrade + 4 SVC

BOW OLYMPUS & BOW ORION Bow Olympus 128 x double acting actuator 1 x 120l HPU 1 x SVC – open/close & throttle control circuits, indirect indication Bow Orion 128 x double acting actuator 1 x 120l HPU 1 x SVC – open/close & throttle control circuits, indirect indication

YAMAL (4 vessels: H1810A, H1811A, H1812A and H1813A) 99 x actuators 2 x 500L HPU (Safe Area) 1 x SVC (Skarpenord Valve Control) (Safe Area/Engine Room) 8 x SVC (Skarpenord Valve Control) Deck Boxer (Haz. Area) – open/close & throttle control circuits, direct indication

12

SKARPENORD 2020

DYNAGAS

124 x actuators (Double acting) 1 x 500L HPU (Safe Area) 2 x SVC (Skarpenord Valve Control) (Safe Area/Engine Room) 7 x SVC (Skarpenord Valve Control) Deck Box (Haz. Area) – open/close & throttle control circuits, direct indication

13

// SERVICE & SPARE S

Our mission: Service 24/7 worldwide Skarpenord’s highly skilled service engineers have long experience with our products and hydraulic systems.

We offer a total service concept which may include on-board survey, technical evaluation, documentation upgrade and customized service as well as standard overhaul. We are committed to flexible and efficient service solutions and ready to serve. We may also offer individual service agreements based on regular follow-up, spare part supply, service and rehabilitation of the system.

QUALITY ASSURANCE

Skarpenord’s products, services and production are assured through an extensive Quality Assurance System. The QA-system is approved by DNV-GL to comply with ISO 9001: 2015.

TYPE APPROVAL

The actuators are type approved by DNV-GL as standard, others upon request.

SPARE PARTS

Skarpenord recommends you to buy spare parts directly, to assure correct quality, dimensions and materials. We have spare parts in stock at all time.

Our online technical support services will give your staff the best professional support/ knowledge via e-mail or phone calls which is crucial to your business’ daily operation.

14

SKARPENORD 2020

SERVICE AND SUPPORT – WORLDWIDE

A staff of well qualified service engineers, also with safety course required for offshore, will at short notice be able to perform necessary maintenance and service; on board , onshore or offshore worldwide.

OUR ADVANTAGES

Experienced and highly qualified service engineers with necessary safety certificates Engineers ready to be at your service at short notice Large stock of spare parts, sending worldwide Our systems are engineered, produced and assembled in our own factory in Norway Technical documentation for all systems delivered

Our experienced service engineers or Skarpenord’s appointed and autorized service engineers are able to supervise and approve installations of own systems. Commissioning and start-up of the system shall as a rule be performed by our service engineers or other autorized service engineers. Skarpenord may offer education and training for customer’s service personnel to be approved working on Skarpenord equipment.

UPGRADE AND RETROFIT

With our knowledge, experience and latest technology we bring new life in your older existing equipment. The most cost-effective and reliable solutions have been used on many upgrades and retrofit projects worldwide.Our engineers can do survey on vessels and recommend the best tailor-made systems, just to fit your requests.

Contact Skarpenord if you need expertise: T +47 35 09 18 00 E sales@skarpenord.no | spares@skarpenord.no | service@skarpenord.no

15

AS | Hydroparken 270, P.O. Box 3 16Skarpenord SKARPENORD 2020

| NO-3661 Rjukan, Norway | T +47 35 09 18 00 | E post@skarpenord.no

skarpenord.no