Issuu

ZETA FERNANDO Architecture // Interiors // Urban Design

My name is Zeta, and I am a B.Arch graduate of University of Oregon. I grew up first in London, England and then in Wilsonville, Oregon. My interests include urban agriculture, lively streetscapes and designing vibrant cities to include all of these. znfernando787@gmail.com (503) 720 2884

TABLE OF CONTENTS Echolands Winery

Amaterra Winery

Anacreon Winery Interiors

Multi-Family Affordable Housing

Three Bedroom Townhouse

Golf Course Outdoor Pavilion

Freehand/Sketches

iii

ECHOLANDS WINERY Selected project from current firm Programs used: Revit, Enscape, Excel, Photoshop, Material Bank I have worked on this project for over two years - Echolands Winery, a 20,000 square foot winery with fermentation space and a tasting room in Walla Walla,Washington. It is currently under construction. I worked on this project from Design Development all the way to Construction Administration. During the Design Development phase, I designed room configurations including the private tasting lounge, underground wine library, main tasting room, outdoor roof deck and entry ramp.We transitioned to the Construction Document phase where I worked extensively on coordinating the reflective ceiling plans, interior elevations, casework details, floor plans, and many other drawings in the CD set. I produced many renderings of the building, and presented interior design concepts to the clients over several months so that we could bring their vision to life. During the Construction Administration phase, I assisted the project architect in answering submittals from the contractor to clarify design questions in a timely manner.

Rendering of the south facade of the winery as seen from the vineyards. I created this rendering for the winery’s marketing promotion. 4

CONTRACTOR TO VERIFY AND COORDINATE RECESSED LIGHT LOCATIONS RELATIVE TO ROOF FRAMING MEMBERS ABOVE. CONTRACTOR TO PROVIDE DIMMERS COMPATIBLE WITH THE FIXTURES BEING DIMMED AND OTHER LIGHT SENSORS/CONTROLS. CONTRACTOR TO VERIFY ONSITE VOLTAGE AND COORDINATE DIMMING BALLAST REQUIREMENTS. CONTRACTOR TO VERIFY FINAL SWITCHING AND SENSOR LOCATIONS, AS WELL AS OPERATION, WITH OWNER AND ARCHITECT PRIOR TO INSTALLATION. 9. "EM" FIXTURES REQUIRE EMERGENCY POWER. LAYOUT SHOWN IS BASED ON THE ASSUMPTION THAT AN INVERTER IS USED FOR EMERGENCY LIGHTING. CONTRACTOR TO PROVIDE MOST COST EFFECTIVE SYSTEM (EITHER REMOTE BATTERY BACKUP OR SINGLE INVERTOR SERVING MULTIPLE FIXTURES). CONTRACTOR TO VERIFY COUNTS, PLACEMENT, AND FC LEVELS OF ALL EMERGENCY LIGHTING. 10. ALL LIGHTING DESIGN BUILD SYSTEMS SHALL BE DESIGNED TO CONFORM WITH "2018 WASHINGTON STATE ENERGY CODE C405" ELECTRICAL POWER AND LIGHTING SYSTEMS AND ALL OTHER APPLICABLE CODE REQUIREMENTS. 11. CONTRACTOR TO VERIFY CONTROLS MEET "2018 WASHINGTON STATE ENERGY CODE C405.2" 12. CONTRACTOR TO PROVIDE EXTERIOR LIGHTING CONTROLS PER "2018 WASHINGTON STATE ENERGY CODE C405.2.6" LIGHTING POWER & EXTERIOR LIGHTING CONTROLS. 13. CONTRACTOR TO PROVIDE OCCUPANCY SENSORS PER "2018 WASHINGTON STATE ENERGY CODE C405.2.1" MINIMUM CONTROL REQUIREMENTS. 14. CONTRACTOR TO PROVIDE DAYLIGHT ZONE CONTROL PER "2018 WASHINGTON STATE ENERGY CODE C405.2.4" MINIMUM CONTROL REQUIREMENTS. 15. THE FOLLOWING SPACES HAVE BEEN IDENTIFIED AS AREAS WHERE AUTOMATIC SHUTOFF (I.E. OCCUPANCY SENSORS, TIME CONTROL) WOULD ENDANGER OCCUPANT SAFETY; PER "2018 WASHINGTON STATE ENERGY CODE C405.2.2 EXCEPTION 2" AND "C405.2.6 EXCEPTION 1" DUE TO THE CONFIGURATION AND USE OF THESE AREAS, AUTOMATIC SHUTOFF CONTROLS HAVE NOT BEEN SPECIFIED FOR THE FOLLOWING ROOMS: 100 COVERED CRUSH PAD, 101 FERMENTATION, 106 ACCESSORY FERM., 114 FLEX ROOM, 124 COVERED BOTTLING. 16. PER "2018 WASHINGTON STATE ENERGY CODE C405.2.4 EXCEPTION 3" DUE TO THE CONFIGURATION AND USE OF THESE AREAS, DAYLIGHT SENSORS HAVE NOT BEEN SPECIFIED FOR THE FOLLOWING ROOMS: 203 TASTING ROOM, 204 BAR, 209 PRIVATE TASTING. 17. CONTRACTOR TO PROVIDE ALL ENERGY CODE COMPLIANCE FORMS AND CALCULATIONS, DELIVERED IN ONE DOCUMENT TO BUILDING OWNER, AS PER C103.6.3.

FINISH CEILING HEIGHT ABOVE FINISH FLOOR

+ X'-X"

T 503-228-5617

X'-XX"

CEILING SPOT HEIGHT

7. 8.

5 A4.01

S4 Covered Bottling #124

sdra.com GYP. BOARD CEILING / SOFFIT

ACOUSTIC CEILING TILE (ACT)

CLT CEILING / SOFFIT

DAYLIGHT ZONE, PRIMARY

DAYLIGHT ZONE, SECONDARY

DAYLIGHT ZONE, TOPLIT

C1 EF

EXHAUST FAN

3 A4.01

Echolands Winery Winery & Tasting Room Mill Creek Road Walla Walla, WA 99362

EMERGENCY LIGHT, SEE LIGHT FIXTURE SCHEDULE, A2.11

XX- EM

EXIT LIGHT: ISOLITE ELT EDGELIT

A-EM

EQ TYP

SL1

2 A4.01

TYP.

A-EM

Fermentation #101

A-EM

SEALED HIGH BAY LINEAR - SURFACE MOUNT SEALED HIGH BAY LINEAR - SURFACE MOUNT

NULITE NULITE

2'-7" 2'-7"

INT-4-CFR-50L35-U-D D2INT-4-CFR-50L35-U-D D2

0-10V 0-10V B1

BARREL CELLAR 2 BARREL CELLAR 2

C03 LINEAR LED FIXTURE

LITHONIA

LED CEILING MOUNTED DOWNLIGHT

BEGA

C1-EM

LED CEILING MOUNTED DOWNLIGHT

BEGA

C2 D1 D2

LED DIFFUSED AMBIENT RING, ANGLED EXTERIOR RECESSED DOWNLIGHT - 4" DIA RECESSED DOWNLIGHT - 4" DIA, IC-RATED

EUREKA LIGHTING LITHONIA ALPHABET

A8.03 TYP MECH./ELEC., STORAGE, MECH., ELECTRICAL

CLX Open L48 5000LM Office SEF WDL MVOLT GZ10 0-10V #120 30K 80CRI SKGYW 24 421 K27 0-10V + 9'-0" 4 TYP

10'-0"

D224 421 K27

ENTRY HALL, RAMP, VESTIBULE, TASTING ROOM, COVERED CRUSH PAD, COVERED BOTTLING, PRIVATE TASTING, COVERED CRUSH PAD ENTRY HALL, RAMP, VESTIBULE, TASTING ROOM, COVERED CRUSH PAD

A8.03 0-10V EQ

DIAL 4561 K27 0-10V LDN4 27/30 L04WR LSS 120 EZ10 0-10V NU4-RD-SW-30LM-27K-80-D50-120-DIM1 0-10VB1-EM D20-NC-WH-WH D2 LUCIFER LIGHTING FS1 R M 1 WH WH 80C23A 27 15 X 3 0-10V EQ 8'-0" EQ COMPANY

3 RECESSED DOWNLIGHT INDOOR UNITS, - 4" DIA, DIRECTIONAL A4.02 SEE MECH. WALL LUMINAIRE, EXTERIOR

LARGE DECORATIVE PENDANT

E2 E3 F1

Mechanical DECORATIVE SLIM CYLINDER PENDANT INSIGHT LIGHTING SPS-MO-27K-ACA-53-12-DIM-TBL-TBL #118 F2 DECORATIVE PENDANT WITH CURVED SHADE SANTA & COLE SISTEMA LAMINA 85 HORIZONTALD1 DIRECT/INDIRECT WALL SCONCE - 48" F1BEGA 44 437 K27 WIDTH F2 B2-EM B3 - 24 3/4" BEGA HORIZONTAL DIRECT/INDIRECT WALL SCONCE Stair 44 436 K27 #117 WIDTH LINEAR DIRECT/INDIRECT PENDANT FINELITE SERIES 12 LED ID-DCO-4'-S3-H-930-10U90D-120V-SC-F A-FE-C4-OBO D1 EXTERIOR BOLLARD BEGA 99 056 K27 EXTERIOR STEP LIGHT HYDREL HSL 11 RD LED 27K MVOLT M MIN5 BRB EXTERIOR STEP LIGHT HYDREL HSL 11 RD LED 27K MVOLT M MIN5 BRB FL02 FL04 B2 B2VW MVOLT EXTERIOR WALL SCONCE LITHONIA WDGE1 LED P1 27K 80CRI + 11'-0" SRM PE DDBXD D1 EXTERIOR WALL SCONCE LITHONIA WDGE1 LED P1 30K 80CRI VW MVOLT SRM E4WH DDBXD Barrel Cellar 2

HEVI LITE S3-EM VIBIA LIGHTING

HL-340-BZ-8LED-LA-4 Office

0-10V

WIREFLOW 0302 OCTAGONAL S

0-10V

9'-2"

U V

LED TAPE IN CHANNEL D1 VANITY SCONCE

KELVIX EUREKA LIGHTING

CEILING SURFACE MOUNT RECESSED CEILING MOUNT RECESSED CEILING MOUNT

5'-0"

RECESSED CEILING MOUNT

#103

C02 +

9'-0"

Tech. Tasting #104

WET LOCATION; DIM TO 5%

0-10V

LAB, TECHNICAL TASTING, WINEMAKER'S OFFICE, OFFICE #207 CEILING PENDANT MOUNT; B.O. FIXTURE @ 8'-0" A.F.F. A A

DIM TO 5% A-EM

0-10V 0-10V 0-10V

ENTRY PATH ROOF DECK, EXTERIOR STAIRS, EMPLOYEE TERRACE, EAST ACCESSIBLE PATH ROOF DECK, EXTERIOR STAIRS, EMPLOYEE TERRACE

INSTALL ON CONC. BASE PER MANUFACTURER RECESS MOUNT IN CONC. WALLS & STEPS; RECESS MOUNT IN STEEL PLANTER AT ROOF DECK RECESS MOUNT IN CONC. WALLS & STEPS; RECESS MOUNT IN STEEL PLANTER AT ROOF DECK

0-10V

B2 101A, 117C, 122B, 209B OVER DOORS

REFER TO 1/A1.02 FOR BOLLARD LOCATIONS REFER TO 1/A1.02, 1/A2.01, 1/A2.02, FOR FIXTURE LOCATIONS REFER TO 1/A1.02, 1/A2.01, 1/A2.02, FOR FIXTURE LOCATIONS; EMERGENCY BATTERY BACKUP PROVIDED Barrel BY MICRO INVERTER Cellar 1 WET R01 LOCATION; DIM#107 TO 5%

0-10V

OVER DOOR 203

MECHANICAL YARD

WALL MOUNT C.L. FIXTURE 1'-3" ABOVE DOOR OPENING, CENTER ON DOOR BELOW WALL MOUNT C.L. FIXTURE 1'-3" ABOVE DOOR OPENING / 9" ABOVE DOOR WET LOCATION; DIM TO 5%; REQUIRES OPENING AT UPER LEVEL; CENTER ON DOOR BELOW EMERGENCY POWER FOR EGRESS A-EM ILLUMINATION A A-EM A WALL MOUNT C.L. FIXTURE 14'-0" ABOVE FERMENTATION LEVEL DIM TO 5%

WINE LIBRARY W.C.S.

MOUNT TO LIGHT SHELF ON TOP OF WINE STORAGE SYSTEM WALL MOUNT; CENTER OF FIXTURE 7'-2" A.F.F.; CENTER ON LAV. BELOW

9'-8"

0-10V 0-10V 0-10V 0-10V

DIM TO 5%

DIM TO 5% DIM TO 5% WET LOCATION; DIM TO 5%

sdra.com

GYP. BOARD CEILING / SOFFIT

Consultant ACOUSTIC CEILING TILE (ACT)

CLT CEILING / SOFFIT

DAYLIGHT ZONE, PRIMARY

DAYLIGHT ZONE, SECONDARY Revisions

No.

6'-4"

Mech./Elec.

FL04

FL03

#109

4'-0"

2 A4.02

EXHAUST FAN

4'-0"

EMERGENCY LIGHT, SEE LIGHT FIXTURE SCHEDULE, A2.11

XX- EM

D3 U

Wine Library #002

A E3

DIM TO 5% UTILIZES MINI JBOX - DON'T INSTALL FULL-SIZE JBOX; DIM TO 5%

EXIT LIGHT: ISOLITE ELT EDGELIT

CEILING FAN: GREENHECK HIGH VOLUME, LOW SPEED CEILING FAN ALUMINUM MILL FINISH, NO COLOR 36" STEM MODEL: DC-5-7-3LV

Storage

B3 FL03

TYP

#108

3 A4.02 1 A4.02

TYP.

TYP

FAN COIL UNIT, TYP.

8'-6"

1 A4.03

4 A4.01

C.3

F1 F2

TYP

4'-0"

2 A4.03

Date

4'-0"

August 1, 2022

Project Number

21012

4 A4.01

LOWER LEVEL

PROJECT NORTH

Issuance

Construction Set

Library Vestibule

Stamp

FL05

1" / 12"

INDOOR UNIT, SEE MECH.

Date

R03

#001

Description

DAYLIGHT ZONE, TOPLIT

4 EQ

3 A4.01

1/8" = 1'-0"

C.3

Drawing Title

FERMENTATION AND LIBRARY LEVEL Consultant CLG. PLANS REFL.

UNDERGROUND LEVEL

TRUE NORTH

FERMENTATION REFLECTED CEILING PLAN

LIBRARY LEVEL REFLECTED CEILING PLAN 1/8" = 1'-0"

Sheet No

A2.10 EQ

8'-0"

TYP

TYP. BEAM SPACING

Prep Room EQ

9'-0"

+ D2

C01

#209

2 A4.02

9'-1"

C1-EM

D2Tax Paid

SEE 1 / A2.10 FOR LIGHT FIXTURES IN THIS AREA

Janitor Clos.

#206

WC Men

C01

#214

#215

9'-0"

WC Assisted-Use A8.03 #213 TYP V

V 3'-6"

3'-6"

#203

C2 5

#211

C01

WC Women

B3 Mech./Elec.

9'-0"

Coat Clos.

E2 C2

Entry Hall

Ramp

#202

C1-EM

Vestibule

#201

C1-EM

#200

C1-EM

Stamp

R01

A8.03 E2

#212

E2 E2

EQ EQ

4'-4"

C1 Tasting Room

1 A4.02

Issuance

2 A4.03

1 A4.03

4 A4.01

Date

Private Tasting

D2 9'-0" C01

2'-0"

4'-4"

A8.03 4'-4"

#210

5 C1

2'-0"

R01

#205

C2 EQ

TYP

Hall

A8.03

1'-0"

6'-2"

D2 C1-EM

Description

TYP

TYP C1

9'-1"

#208

No. EQ

6'-0"

#207

C1 L

Revisions

3'-0"

3 Office

9/2/2022 2:26:29 PM

T 503-228-5617 CEILING SPOT HEIGHT

FL03

1" / 12"

B2-EM

S3-EM

FINISH CEILING HEIGHT ABOVE FINISH FLOOR

X'-XX"

AFL10-WF-54-3K-35-UV-DB-HDS-A30-SF 0-10V -WM-DB-15 + 12'-9 1/2" DK27K-24V 0-10V 3530-23 LED.HO 30 120V DV SC WH 0-10V 3980 B2-EM

1331 NW Lovejoy Street, Suite 775 Portland, OR 97209

SKYLIGHT TYPE - SEE A7.02

+ X'-X"

DATE

CEILING TYPE - SEE A6.02

1i AA

Project

9/2/2022 2:22:32 PM

Lab

DIM TO 5% R03

1" / 12"

SURFACE MOUNT TO ENTRY TRELLIS COLUMN 8'-6" A.F.F. TO FIXTURE C.L. CEILING PENDANT MOUNT; B.O. FIXTURE @ 10'-5" A.F.F; OCTAGONAL FIXTURE TOP LENGTH 4'-6", MIDDLE LENGTH 2'-0", BOTTOM LENGTH 1'-0" PRIVATE TASTING CEILING PENDANT MOUNT; B.O. FIXTURE @ 5'-6" A.F.F. WINE LIBRARY CEILING PENDANT MOUNT; B.O. FIXTURE @ 6'-0" A.F.F. STAIRS, TRANSITION BETWEEN FERMENTATION AND COVERED WALL MOUNT; CENTER OF FIXTURE @ 7'-0" A.F.F. CRUSH PAD B2 STAIRS WALL MOUNT; CENTER OF FIXTURE @ 7'-0" A.F.F.

DATE

STAIRS - TASTING ROOM LEVEL

KIM

8'-6"

EXTERIOR FLOOD LIGHT

7'-4"

WET LOCATION; DIM TO 5%; EMERGENCY BATTERY BACKUP PROVIDED BY MICRO Accessory Ferm. INVERTER #106 DIM TO 5'-9" 5% WET LOCATION; DIM TO 5% B1-EM DIM TO 5%; IC RATED

MAIN ENTRY TRELLIS

#116

S3-EM

A-EM

TYP

CEILING SURFACE MOUNT

#115

EQ 8'-6"

S2-EM

PRIVATE TASTING TASTING ROOM OVERHANG W.C.S, TAX PAID, PREP ROOM, B1BREAK ROOM, OFFICES, OPEN OFFICE WINE LIBRARY Barrel Cellar 3

#119

9'-2"

S1 S2

Project

B2 B2-EM

0-10V

NULITE

BARREL CELLAR 2, BARREL CELLAR 3, FLEX ROOM, CHEM. Flex Room R04 INDOOR UNIT, #114STOR., ACCESSORY FERM. SEE BARREL CELLAR 2 ,BARREL CELLAR 3, MECH. FLEX ROOM, ACCESSORY FERM.

10'-0 "

SEALED HIGH BAY LINEAR - PENDANT MOUNT

0-10V

LEGEND

10'-0 "

B1-EM

INT-4-CFR-50L35-U-D WITH AC10 CABLE INT-4-CFR-50L35-U-D WITH AC10 CABLE

S3 C1 ALL SPACES TO BE OPEN TO STRUCTURE, U.N.O. ALL LIGHTS ARE TO BE CENTERED IN ROOM, U.N.O. SEE SITE PLAN A1.02 FOR SITE LIGHTING. SEE FLOOR PLANS A2.01 & A2.02 FORC1 SITE LIGHTING AT BUILDING. SEE A2.11 C1-EM FOR LIGHTING FIXTURE SCHEDULE. 4. ALL RECESSED FIXTURES INSTALLED IN INSULATED CEILINGS MUST BE IC-RATED. C1 5. CONTRACTOR TO VERIFY AND COORDINATE RECESSED LIGHT LOCATIONS RELATIVE TO ROOF FRAMING MEMBERS C1 ABOVE. 6. CONTRACTOR TO PROVIDE DIMMERS COMPATIBLE WITH THE FIXTURES BEING DIMMED AND OTHER LIGHT SENSORS/CONTROLS. C1-EM Covered Crush 7. CONTRACTOR TO VERIFY ONSITE VOLTAGE AND COORDINATE DIMMING BALLAST REQUIREMENTS. Pad 8. CONTRACTOR TO VERIFY FINAL SWITCHING AND SENSOR LOCATIONS, AS WELL AS OPERATION, WITH OWNER AND C1 C1 #100 ARCHITECT PRIOR TO INSTALLATION. 9. "EM" FIXTURES REQUIRE EMERGENCY POWER. LAYOUT SHOWN IS BASED ON THE ASSUMPTION THAT AN INVERTER C1-EM (EITHER REMOTE IS USED FOR EMERGENCYC1 LIGHTING. CONTRACTOR TO PROVIDE MOST COST EFFECTIVE SYSTEM BATTERY BACKUP OR SINGLE INVERTOR SERVING MULTIPLE FIXTURES).R01 CONTRACTOR TO VERIFY COUNTS, PLACEMENT, AND FC LEVELS OF ALL EMERGENCY LIGHTING. C1 10. ALL LIGHTING DESIGN BUILD SYSTEMS SHALL BE DESIGNED TO CONFORM WITH "2018 WASHINGTON STATE ENERGY CODE C405" ELECTRICAL POWER AND LIGHTING SYSTEMS AND ALL OTHER APPLICABLE CODE REQUIREMENTS. 11. C1 CONTRACTOR TO VERIFY CONTROLS MEET "2018 WASHINGTON STATE C1 ENERGY CODE C405.2" 12. CONTRACTOR TO PROVIDE EXTERIOR LIGHTING CONTROLS PER "2018 WASHINGTON STATE ENERGY CODE C405.2.6" LIGHTING POWER & EXTERIOR LIGHTING CONTROLS. C1 C1 13. CONTRACTOR TO PROVIDE OCCUPANCY SENSORS PER "2018 WASHINGTON STATE ENERGY CODE C405.2.1" 1 MINIMUM CONTROL REQUIREMENTS. A4.01 14. CONTRACTOR TO PROVIDE DAYLIGHT ZONE C1 CONTROL PER "2018 WASHINGTON STATE ENERGY CODE C405.2.4" MINIMUM CONTROL REQUIREMENTS. 15. THE FOLLOWING SPACES HAVE BEEN IDENTIFIED AS AREAS WHERE AUTOMATIC SHUTOFF (I.E. OCCUPANCY C1 SENSORS, TIME CONTROL) WOULD ENDANGER OCCUPANT SAFETY; PER "2018 WASHINGTON STATE ENERGY CODE C405.2.2 EXCEPTION 2" AND "C405.2.6 EXCEPTION 1" DUE TO THE CONFIGURATION AND USE OF THESE AREAS, AUTOMATIC SHUTOFF CONTROLS HAVE NOT BEEN SPECIFIED FOR THE FOLLOWING ROOMS: 100 COVERED CRUSH C1 PAD, 101 FERMENTATION, 106 ACCESSORY FERM., 114 FLEX ROOM, 124 COVERED BOTTLING. 16. PER "2018 WASHINGTON STATE ENERGY CODE C405.2.4 EXCEPTION 3" DUE TO THE CONFIGURATION AND USE OF THESE AREAS, DAYLIGHT SENSORS HAVE NOT BEEN SPECIFIED FOR THE FOLLOWING ROOMS: 203 TASTING ROOM, 204 BAR, 209 PRIVATE TASTING. 17. CONTRACTOR TO PROVIDE ALL3ENERGY CODE COMPLIANCE FORMS AND CALCULATIONS, DELIVERED IN ONE DOCUMENT TO BUILDING OWNER, AS PER C103.6.3. 1. 2. 3.

10'-0 "

NULITE

FERMENTATION, BARREL CELLAR 1

9'-0"

SEALED HIGH BAY LINEAR - PENDANT MOUNT

0-10V

#121

SHEET NOTES

EQ TYP

PR2282 K3 105W 120V BZT SPG D2REML3-50 D2

EQ TYP

16'-0"

LUMINIS

MOUNTING NOTES CEILING PENDANT MOUNT, B.O. FIXTURE @ 3'-4" BELOW CEILING WET LOCATION; DIM TO 5% SURFACE CEILING PENDANT MOUNT, B.O. WET LOCATION; DIM TO 5%; REQUIRES EQ 5'-2" FIXTURE EQ @ 3'-4" BELOW CEILING EQ A FOR EGRESS SURFACE EMERGENCY POWER EQ EQ ILLUMINATION 4'-6" B3 EQADJACENT WET LOCATION; DIM TO 5% CEILING PENDANT MOUNT, B.O. C02 FIXTURE TO BE LEVEL W/ B.O. BEAM D2 + 9'-0" D2 CEILING PENDANT MOUNT, B.O. FIXTURE TO BE LEVEL W/ B.O. ADJACENT WET LOCATION; DIM TO 5%; REQUIRES BEAMElectrical EMERGENCY POWER FOR EGRESS #125 WC Vestibule D2 #110 ILLUMINATION D2 B3 CEILING SURFACE MOUNT WET LOCATION; DIM TO 5% WC ADA WC WC / Shower ADA CEILING SURFACE MOUNT WET LOCATION; DIM TO 5%; REQUIRES #113 #112 #111 V EMERGENCY POWER FOR EGRESS V D2 D2 ILLUMINATION B1 V 4'-3" EF CEILING SURFACE MOUNT DIM TO 5% Chem. Stor. D2 B1 EF EF #105 CEILING SURFACE MOUNT WET LOCATION; DIM TO 5% 8'-8"

E1 ING

HIGH BAY PENDANT

LOCATION B1 FERMENTATION, BARREL CELLAR 1

4'-2"

A-EM

DIMMING B1-EM 0-10V

LIGHTING FIXTURE SCHEDULE

10'-0 " BEAM SPAC

L C02

A-EM

D2 8'-0"

MODEL PR2282 K3 105W 120V BZT SPG Office

1'-8"

EQ S3 MANUFACTURER LUMINIS

#102

SL1

3'-1"

HIGH BAY PENDANT

Winemaker's Office

A EQ

6'-0"

8'-0"

DESCRIPTION

TYP.

R01

Break Room D2 #122

1'TYP. 6" OF (4)

A A

ING

SL2

CEILING FAN: GREENHECK HIGH VOLUME, LOW SPEED CEILING FAN ALUMINUM MILL FINISH, NO COLOR 36" STEM MODEL: DC-5-7-3LV

A-EM INDOOR UNIT, TYP., SEE MECH., ROD-MOUNTED FROM CEILING

TYPE

8'-0" BEAM SPAC

Echolands Winery Winery & Tasting Room Mill Creek Road Walla Walla, WA 99362

16'-0 "

The images on the left show reflected ceiling plans that I worked on to coordinate the location of lighting, systems, beams, daylighting zones and ceiling-hosted equipment in the winery.

C.3

TYP

Construction Set Date

August 1, 2022 F

Project Number

21012

UPPER LEVEL 1

TASTING ROOM REFLECTED CEILING PLAN

Drawing Title

PROJECT NORTH

TRUE NORTH

TASTING ROOM LEVEL RCP AND LIGHT SCHEDULE

1/8" = 1'-0" Sheet No

A2.11

18 S2

1/4" = 1'-0"

1/4" = 1'-0" S2 EQ

S2-EM

1/4" = 1'-0"

EQ EQ

N01

HAND WASH SINK

6 A5.03

3/4" STRUCTURE BETWEEN COOLERS, VFY. OPENING REQ. W/ MANUF.

13 A9.10

2'-0"

1'-6"

3'-6"

N01 A

TYP

14 A9.10 2'-0"

16 A9.10

214B

#203 1807 SF

2'-0"

CLR.

1'-6"

FILLER

8'-2 1/4" CLR.

21 BACK BAR ELEVATION 8/3/2022 8:50:49 AM

1/4" = 1'-0"

WC Men #214 146 SF

214A

Tasting Room

WC Women

WC Assisted-Use #213 51 SF

#215 151 SF

213

215A 12

VFY. OPENING REQUIREMENTS W/ MANUF.

#204 47 SF

TYP

2'-0"

208A

#206 77 SF

9'-0 5/8"

4 A9.11

Tax Paid

Bar

3'-0"

A9.02 4'-0"

A5.09

N02

FILLER

FRP WAINSCOT

9'-0"

1'-8"

T-7

#205 148 SF

(4) U.C. WINE COOLERS 18

3'-0"

GARBAGE AND RECYCLING

A5.08 10

206

HAND WASH SINK

Hall

5'-3 1/4"

#204

3 A5.02

5 8 A5.08 Office #207 119 SF

A5.02 21

1/4" = 1'-0"

EQ EQ

11'-5 3/4"

DISPLAY SHELVES / GLASS STORAGE

Bar

19'-1 1/8"

203 DN

19'-1 1/8"

215B

215C

N01 A

3 ENLARGED PLAN AT BAR

F02

TRIM END PANELS TO FIT

5 A9.11

DATE

11/9/2023 3:51:30 PM

CABINET

view

DATE

4'-4"

TRIM END PANELS TO FIT

215D

2'-0"

S2-EM

4'-0"

TRASH CHUTE

2 A5.11

BEGIN PANEL INSTALLATION AT

FRP WAINSCOT

The images on the following pages are renderings I created of various spaces within the winery, accompanied with enlarged plans of the space. I also show a detailed interior elevation I drew of the tasting bar on this page to the right. This image is the main tasting room which almost cantilevers out, with generous views of the surrounding vineyards. Doug fir glulam beams and a wood cross laminated timber ceiling frame the space. U.C. WINE COOLER (4)

11'-8 3/4"

3 A3.01

207

2'-11 1/2"

S2-EM

24'-7 3/4"

5'-4

Entry Hall

A5.08

F02

#202 411 SF

1 A5.02

X01s

1 A5.12

MAIN TASTING ROOM 24'-0"

2 A4.03

16'-0"

1 A4.03

56'-0"

4 A4.01

C.3

22 JANITOR CLOSET - SOUTH 23 JANITOR CLOSET 1/4" = 1'-0"

1/4" = 1'-0"

1 TASTING ROOM LEVEL PLAN 1/8" = 1'-0"

ACOUSTIC ASSEMBLY DOOR TYPE SEE A7.01

101

WINDOW TYPE SEE A7.02 & A7

LOCATION OF FLOOR

A1 XXX

FLOOR FINISH SEE A5.10

EQ 5'-0"

5 A4.01

S2-EM S2-EM

7'-4 5/8"

6 A5.11

This render showcases the main entry to the tasting room - a long gentle ramp. Along the right side of the ramp, windows allow visitors to observe the barrel storage room on the level below.

S2-EM

X01

ACCESS GATE

S2-EM

2'-8"

4'-4"

4'-7"

WALK PAD

S2-EM

5'-10 7/8"

#216 1332 SF

EQ EQ

8'-0"

203

11'-5 3/4"

#207 119 SF

A5.08 10

#205 148 SF

N02

160'-

2 A4.02

N06

#209 540 SF

F02

208B

N01

WC Men

Mech./Elec.

#214 146 SF

87'-4

#211 79 SF

212

5'-4 1/4" #202 411 SF

N02

1 A5.02

3'-11"

19'-10"

Ramp

N05

#201 892 SF

56'-0"

200 Vestibule

S2 S2

#200 69 SF

S2 S2 1 A4.02

12'-0" TYP.

16'-8

24'-0"

78'-0"

4 A4.01

C.3

2 A4.01

SEE A2.11 FOR LIGHT FIXTURE SCHEDULE, TYP.

A3.01

X01

A5.07

ENTRANCE RAMP

X01b

1 TASTING ROOM LEVEL PLAN

6 A5.11

TRUE NORTH

Fermentation 9'-0"

101F

1 F02

F03

Winemaker's 4 Office

Break Room

#102 131 SF

N04

#122 253 SF

A5.04

F02

122B

122A

2 A5.01

121A

A5.04 12

8'-0"

A5.03 15

F02

9'-0"

A3.01

#105 155 SF

A5.06 7

#119 182 SF

A5.04

Accessory Ferm.

.00

X03

Tech. Tasting #104 215 SF

3 A4.02

107B

107A

104B

X08

X01

X08

2 A3.0 3

116C N04

Stair

#118 100 SF

104A

N04

116B

118 Mechanical

A5.04

#106 880 SF

N11

#103 245 SF

12'-7 1/2"

N11

103

Office

117B

8'-0"

X01

X07b

#112 46 SF

117C

S2 S2

A5.03 19

10'-6"

105

Chem. Stor.

#113 53 SF

16'-0"

119

WC ADA

#117 211 SF

Barrel Cellar 1 #107 3236 SF

ALIGN DOOR OPENINGS

117A

N12

1 A5.11

4'-0"

2 A4.02 5

X01

A5.05 7

FL04 1

view

46'-0"

CONC. COLUMN

N06

A3.02 4

A5.06

TASTING ROOM ABOVE

3 X01s

116A

WALL

N11

109

8'-0" 8/3/2022 8:50:44 AM

DATE

SEE A2.11 FOR LIGHT FIXTURE SCHEDULE, TYP.

8'-0"

5'-0"

S2 X01s

12'-0" TYP.

24'-0"

16'-0"

18'-10"

#109 368 SF

BARREL STORAGE

37'-2"

Storage

Mech./Elec.

N11

14'-2"

N11

8'-8"

#116 2817 SF

CONC. COLUMN

108

X07b

Barrel Cellar 2

#108 307 SF

1 A4.03

4 A4.01

C.3

63'-10"

A3.01

PROJECT NORTH

FERMENTATION LEVEL PLAN 1/8" = 1'-0"

TRUE NORTH

1 A4.02

4 40'-9"

11'-0"

161'-0"

2 A4.03

A5 3

106B

15'-1

S2 S2

106A

N11

#111 109 SF

2'-0"

Barrel Cellar 3 #115 952 SF

N01

WC / Shower ADA

Lab

N11

114B

16 N12

#100 1945 SF

111

#125 155 SF

#114 1175 SF

9'-8"

#110 84 SF

Electrical

Flex Room

114A

F02

S2 2'-4"

16'-4 "

WC Vestibule

120

Covered Crush Pad

101B

125

A5.04 16 17

#120 328 SF

X01b

1 A5.13

Inside the barrel storage room, the view looks towards the thin windows to the west.The thin windows are a recurring design motif throughout the building.

Open Office

19'-0"

31'-6"

14'-0"

#123 235 SF

15 N11

Employee Terrace

X07

2'-0"

101A

#121 181 SF

N01

N11

A5.07 3 A5.01

121B

A5.03 11

1 A5.01

112

13 SITTING WALL

Office

113

A3.01

10'-6"

X01

107C

S2-EM X07

102

3 A4.03

5'-0"

4'-8"

1 3/4"

X03

#101 5723 SF

101E

5'-0"

N06

N05

1/8" = 1'-0"

10'-1

F02

1'-0 3/ 4"

PROJECT NORTH

11'-1 0"

1 A4.03

11'-0"

185'-0"

2 A4.03

X01

1 A5.12 16'-0"

201

3 A4.01

X01s

24'-0"

A3.0 2

view

24'-7 3/4"

Entry Hall

5 A5.13

3 209A

213

F02

1 A3.02

2'-7 1/4"

101C

9'-0"

214A

215B

215C

215D 12 A5.08

Coat Clos. #212 10 SF

#213 51 SF

215A

9'-0 5/8"

N01

WC Assisted-Use

#215 151 SF

211

101D

WC Women

X01s

#210 30 SF

N02

#204 47 SF

X08

2 A3.03

A5.08

3 Private Tasting

Janitor Clos.

Bar

#203 1807 SF

8/3/2022 8:50:49 AM

210

214B

Tasting Room

208A

#124 387 SF

#206 77 SF

DATE

5 A4.01

X08

OPEN TO BARREL CELLAR BELOW

#208 235 SF

Covered Bottling

Tax Paid

A5.09

Prep Room

E1 3 A4.02 X01

11 A8.06

F02

206 4

5 8 A5.08 Office

5'-3 1/4"

Hall

X01

209B

1 A3.0 3

X01

F02

3 A5.02

2 A5.02

Mechanical Yard

6 A5.03

15'-9" EQ

S2-EM

13'-4 1/4"

207

2 A5.11

EQ EQ

A3.01

11'-8 3/4"

S2 EQ

56'-0

S2-EM

2 A4.01

46'-0"

EQ EQ

WOOD SCREEN, SEE 11 / A8.06 SIM.

5'-10 7/8"

S2 S2-EM

Roof Deck

5'-10 7/8"

9'-0"

5'-10 7/8"

3 A4.01

SCREEN POST & PLANTER BED JOINT, TYP, ALIGN W/ DECK PAVER JOINT

5'-10 7/8"

1/4" ± GAP BETWEEN PLANTERS

SEE A2.11 FOR LIGHT FIXTURE SCHEDULE, TYP.

EQ EQ

S2-EM

DECK BENCHES BY OWNER, TYP.

5'-10 7/8"

7'-0"

2 A3.01

245 SF

40'-0 "

Consultant

.00

1 A4.01

° X03

h. Tasting

2 A3.02

X08

X01

107C

X02 X08

2 A3.03

A3.02

view

WALL

Library Vestibule

1/4" ± GAP BETWEEN PLANTERS UP

#001 223 SF

EQ EQ

21'-6 1/4"

C.3

LEVEL PLAN WINE LIBRARY 2 LIBRARY

8'-0"

1/8" = 1'-0"

S2-EM

EQ X01

203

My other favorite space is this private 5 tasting room, which 8 A5.08 6 Prep Room 1 Office also9 has views7 down 4 A5.08 2 208A the Hall into 10 barrel cellar A5.08 3 210 Private Tasting 11 below. We designed a Janitor Clos. Tax Paid custom wood screen to obscure WC this room Mech./Elec. Men from view of the entry 211 ramp for added Coat Clos. WC Assisted-Use WC Women privacy.We sourced a 212 209A 213 215A sculptural light fixture 12 to accent the space.

209B

2 A5.02

11'-5 3/4"

F02

5'-3 1/4"

#205 148 SF

D1 21012

FERMENTATION AND LIBRARY LEVEL FLOOR PLANS

F02

A2.01 3 A4.02

X08

X01

X08

2 A3.0 3

11 A8.06 X01s

OPEN TO BARREL CELLAR BELOW

#208 235 SF

207

#207 119 SF

2 A4.01

2 A4.02

N02

206

#209 540 SF

N06 F02

#210 30 SF

N01

#214 146 SF

#211 79 SF

46'-0"

214B

208B

#206 77 SF

view

August 1, 2022

Sheet No

15'-9" EQ

S2-EM

13'-4 1/4"

EQ EQ

11'-8 3/4"

2 A5.11

Construction Set SCREEN POST & PLANTER BED JOINT, Date TYP, ALIGN W/ DECK PAVER JOINT

Drawing Title

5'-10 7/8"

EQ EQ

4 A4.01

Project Number

6'-8 1/4"

5'-10 7/8"

3 A5.11

#216 1332 SF

Issuance

EQ EQ

9'-0"

5'-10 7/8"

3 A4.01

#002 518 SF

5'-10 7/8"

1 A4.02

11'-0"

WALK PAD

Wine Library

3 A4.02

7'-0" 8'-8"

X01s

40'-9"

ACCESS GATE

5'-10 7/8"

Date

Stamp

X01

Description

19'-8"

46'-0"

2'-8"

4'-4"

4'-7"

S2-EM

No.

1 A5.03

2 A4.02

S2-EM

Revisions

SEE STRUCT. FOR FOUNDATION WALL @ STEPPED FOOTING, TYP.

12'-7 1/2"

7'-4 5/8"

S2-EM

30'-4"

5 One of my favorite A4.01 B1 spaces we designed is this underground wine library for wine club S2 S2 members. It features S2 precast concrete S2 bottle storage in the walls, and a small wine S2-EM bar at the end for glass storage. We S2 S2-EM S2 sourced a curved light S2 S2 shade to echo the Roof Deck curved concrete S2 S2 barrel ceiling. S2-EM

002

10'-0 "

3 A4.02

-0"

#212 10 SF

#213 51 SF

#215 151 SF

N02

9'-0 5/8"

24'-7 3/4"

5'-4 1/4"

Entry Hall

A5.08

F02

2'-7 1/4"

N01

214A

215B

215D

215C

N02

#202 411 SF

1 A5.02

3'-11"

19'-10"

201

PRIVATE TASTING

Ramp

200 Vestibule

#201 892 SF

S2 S2

#200 69 SF

13 S2

X01s

1 A5.12 56'-0"

S2 12'-0" TYP.

78'-0"

24'-0"

11'-0"

185'-0"

SEE A2.11 FOR

AMATERRA WINERY Selected project from previous firm Programs Used: AutoCAD, SketchUp At my previous firm I had the opportunity to work on Amaterra Winery, which is a 45,000 square foot urban winery located in the West Hills. Amaterra is a gravity-fed winery that contains fermentation space and many tasting rooms with some private rooms for events. My role on this project was to support the architect with SketchUp mock ups of different massing options for the outer deck spaces and the lower lawn space in the back. In AutoCad, I drew several site section studies as the site was challenging with many slopes. I also worked on some roof and wall details. My work is shown on the following pages.

Rendering of front west entrance; I worked on the SketchUp model to hand off to the renderer.

1010

I drew several site sections at various intervals so that we could understand the relationship between levels on this sloping site.The fermentation level is on the middle floor - after crushing and fermentation, the grapes travel from this floor to the lower floor to be aged and bottled in the blending room. Moving wine downhill by gravity is gentler, reducing the risk of overly tannic or oxidized wine, and reducing energy consumption.

RIDGE DETAIL 12

SITE SECTION

DECKING SUPPORT

Photograph of Amaterra’s east facade and distinctive roofline. 13

ANACREON WINERY INTERIORS Selected project from current firm Programs used: Revit, Enscape Anacreon Winery is a 4,000 square foot winery to be located near Newberg.The concept is about creating private and secluded tasting “pods” for visitors to experience the terroir of this winery in a slow and personable way. My role on this project was to create an interior design concept that supported the private concept of this winery. I chose local materials with a neutral color palette to frame the vineyard views and highlight the unique daylighting conditions built within the space. Each tasting pod has a skylight wrapped in board and batten wood with acoustic felt behind. The skylights flood light down into the tasting pods, where indoor plants grow above wine bars.There are also movable walls on casters which close up the tasting pods, but can be opened to make one large hall for flexibility.

Rendering I made of the largest tasting pod to showcase the neutral wood and concrete interiors.

T 503-228-5617 1200 NW Naito Parkway, Suite 410 F 503-227-8584 Portland, OR 97209

Anacréon Tasting Anacréon Room Tasting Room Danell & Kipp Myers Danell & Kipp Myers 17571 NE Calkins Lane 17571 NE Calkins Lane Newberg, Oregon 97132 Newberg, Oregon 97132

sdra.com T 503-228-5617 F 503-227-8584 sdra.com

TASTING POD 3 2

TASTING POD 3 3

FLEX ROOM 2

OFFICE

VESTIBULE 4

FLEX ROOM 2 OFFICE

VESTIBULE 4

TASTING PORCH

TASTING POD 2

TASTING PORCH

KITCHEN

RECEPTION HALL

TASTING POD 2

KITCHEN

RECEPTION HALL

FLEX ROOM 1

FLEX ROOM 1 WC TASTING GARDEN

TASTING POD 1 WC

HALL

ADA WC

TASTING GARDEN

TASTING POD 1

HALL ADA WC EXTERIOR TASTING POD

EXTERIOR TASTING POD

Project

Consultant

Revisions

No.

Description

Date

Revisions

No.

Description

Date

1200 NW Naito Parkway, Suite 410 Portland, OR 97209 T 503-228-5617 1200 NW Naito Parkway, Suite 410 F 503-227-8584 Portland, OR 97209 sdra.com T 503-228-5617

StampF 503-227-8584

Anacréon Tasting Anacréon Room TastingCON NO ST T C Room O NO R FO N U R Danell & Kipp ST TMyers C TI R FO O U R N Danell & Kipp Myers C TI 17571 NE Calkins Lane O N 17571 NE Calkins Lane Newberg, Oregon 97132 Newberg, Oregon 97132

The upper floor hosts the entrance hall, interior tasting pods, exterior tasting pods with a fireplace, and bathrooms.The lower floor is a secret speakeasy for wine club members.The tasting pods are labeled “experiencing terroir” meaning they face the views of the vineyards so visitors can soak up the water, wind, sun and grapes that make their wine.

Project

sdra.com

Stamp

FIREPLACE PORCH

FIREPLACE PORCH 9

NORTH

NORTH A

Issuance

Design Development

Issuance

TASTING POD 3

Date Design Development 12.12.2022

TASTING POD 3

Date

MAIN LEVEL FLOOR PLAN

Project

ADA WC FLEX ROOM 2

EXPERIENTIAL ZONES

OFFICE

VESTIBULE 4

HALL

SPEAKEASY

SPEAKEASY PORCH

ZONE 1: RESETTING THRESHOLD

TASTING PORCH

TASTING POD 2

KITCHEN

RECEPTION HALL

ZONE 2: EXPERIENCING TERROIR

HALL

BAR 5

OFFICE

VESTIBULE

TASTING PORCH

Project

UTIL

OFFICE

VESTIBULE

22013 MAIN FLOOR PLAN INTERIOR Drawing Title MAIN FLOOR PLAN Consultant INTERIOR

Drawing Title

FLEX ROOM 2

Project Number

TASTING POD 3

12.12.2022 22013

Project Number

TASTING POD 2

TASTING PORCH

Sheet No Consultant

I1.01 I1.01 6

Sheet No

TASTING POD 2

KITCHEN

RECEPTION HALL

KITCHEN

RECEPTION HALL

FLEX ROOM 1

R FLEX ROOM 1

ANACRÉON WINERY 12 / 12 / 2022

WC TASTING GARDEN

TASTING POD 1 WC

HALL

ADA WC

TASTING GARDEN

TASTING POD 1

HALL ADA WC

ZONE 3: MISCHIEVIOUS SURPRISE

FLEX ROOM 1 STAIRWELL 6

Revisions

No.

EXTERIOR

Description

Date

8 Revisions

STORAGE

ZONE 4: SERENITY

WC TASTING GARDEN

No.

Description

Date

TASTING POD 1

HALL

ZONE 5: NATURAL GARDEN

ADA WC

FIREPLACE PORCH 9

FIREPLACE PORCH 8

EXTERIOR TASTING POD

Stamp

FIREPLACE PORCH 9

R23_zetafARFF8.rvt

NORTH

afARFF8.rvt

Stamp

C O NO N ST T C O NO R FO N U R ST T C TI R FO O U R N C TI O N

I developed experiential zones to guide the interior design for each distinct space.The entrance hall (center rendering below) uses stone and exposed aggregate concrete to “reset” the visitor’s mind - leaving the outside world to experience a space that is old, rustic and feels like it has been here forever.

EXTERIOR TASTING POD RENDERING ANACRÉON WINERY 12 / 12 / 2022

The rendering on the upper right showcases the exterior tasting pods, which feature a fireplace and pizza oven.

RECEPTION HALL RENDERING

The rendering on the lower right displays the secret speakeasy with its own wine bar and small booths for a cozy experience. Since this is a “mischievous surprise”, the interiors for this space are darker, and mysterious, with a playful approach to lighting.

17 SPEAKEASY RENDERING ANACRÉON WINERY 12 / 12 / 2022

MULTI-FAMILY AFFORDABLE HOUSING Selected project from previous firm Programs used: Revit, SketchUp, AutoCAD This multi-family affordable housing project is an example of transit-oriented development. It is sited within walking distance of a light-rail station, and features 1-bedroom, 2-bedroom and 3-bedroom apartments, community rooms, a shared laundry room and a shared bicycle storage room for residents. According to FHA guidelines, each apartment is a Type B Dwelling Unit except for one on each floor which is a Type A Dwelling Unit - this means it is fully accessible.The Type B Units have adjustable shelving and adaptable base cabinets.The Type A Units accommodate wheelchair users with larger turning radii in the kitchen and bathrooms, lever door hardware, and accessible thresholds. My role in this project was to generate, organize and maintain the Revit model, from which I produced floor plans, enlarged plans of dwelling units, fire/life safety plans, sections, cabinet details, reflected ceiling plans, and interior elevations, among other various model edits. I worked consistently on the model and drawings to produce a complete construction document set. I also produced conceptual models of the building massing to study balconies, copings, and bay size options periodically. Select examples of my work are on the following pages.

Photograph of the project after final completion which showcases the courtyard and accessible parking lot. 18

2 16' - 10"

6.5

6' - 0"

36' - 6"

35' - 0" 11' - 7 3/4"

270' - 10"

35' - 0"

11' - 7 3/4"

35' - 0"

11' - 7 3/4"

35' - 0" 11' - 7 3/4"

11' - 7 3/4"

35' - 0"

11' - 7 3/4"

36' - 6" 11' - 7 3/4"

11' - 7 3/4"

2 A3.02 2' - 0"

A3.01

1 A2.12 2' - 0" TYP

2 TYP A2.12

1 OPP A2.12

These floor plans were created in Revit. The first floor hosts many community spaces, including the lobby, leasing office, two community rooms, storage, a shared laundry space, bike parking, and trash and recycling. Floors 2-6 have similar floor plans with multiple 1-bedroom and 2 bedroom-units, as well as a few 3bedroom units.

2 BR UNIT B

103

104

105

106

107

A3.02

108

103

102

135

101

116

105

104

114B

106 6

113

112B

111B

107 6

2' - 0"

108 1S2B

110

6' - 0"

CORR 109

B C

ELEV 1

BIKE PARKING

CORR

114

135

115

13' - 8"

LAUNDRY

STORAGE

TRASH/ RECYCLING

113

112

111

1 BR UNIT A

2 BR UNIT C

109

110

PACKAGES

15' - 8"

25' - 0"

ELEC

116

25' - 0"

UTILITIES 2 A2.11

118

FULLER STATION HOUSING 90% CONSTRUCTION DOCUMENTS

115

114A

112A

1S2A

111A

RISER ROOM HB

117

2' - 0"

2 A3.03

132

1 A2.10

2 120

130A

COMPUTER LAB

STORAGE

134

GARDEN STORAGE

121

123 122 130B

129

CORR

129

121

6' - 0"

124B

124A

2. ALL LEVEL 1 EXTERIOR WALLS TO BE

124

126

127

4' - 0" 1S1B

ROOF DRAIN

HOSE BIB

1 2 3 4 5 6 7 8

DOWNSPOUT

KEYNOTES - LEVEL 1

COMMUNITY ROOM 1

128

N5 T

UNO.

SEE EXTERIOR ELEVATIONS FOR SIDING TYPES & LAYOUTS. 3. SEE ENLARGED PLANS FOR INTERIOR WALL TYPES NOT NOTED. 4. SEE A9.09 FOR DOOR SCHEDULE.

25' - 0"

128

125

RR 125

COMMUNITY ROOM 2

1S1C

1. SEE SHEET G2.00 FOR WALL TYPES LEGEND.

CONCRETE WALL/COLUMN; SEE STRUCT FOR MORE INFO

5. GRIDLINES ARE AT CL OF STUD & FACE OF STUD, UNO.

122

25' - 0"

EXTENTS OF CONSTRUCTION

KITCHEN 2

26' - 6"

13.5

GENERAL NOTES

ITEM ABOVE

OFFICE

9' - 3"

13.1

130

13' - 1 1/4"

16' - 10"

10' - 8"

120

LEASING/ MANAGER

47' - 10"

131

1 1 A2.11

11' - 9 1/4" 35' - 4 1/4"

12.5

LEGEND

123

A3.01

10.5

1 A2.09

10' - 5 1/2"

131A

VEST DN

11' - 7 3/4"

40' - 6"

9.5

131B

35' - 0"

11' - 7 3/4"

146' - 7 1/4"

132 63' - 2"

LOBBY 119

12' - 0"

23' - 6 1/2"

OFFICE 3

6' - 0"

133

A3.04

STAIR 1 A5.02

3 A2.12

133

119

150' - 2"

1 A1.05

9730 SE Fuller Road Happy Valley, Oregon, 97086

56' - 0"

12' - 0"

25' - 0" 12' - 0"

2 BR UNIT A

102

25' - 0"

2 BR UNIT A

JAN 127

CANOPY ABOVE BAY ABOVE BUILDING SIGNAGE; SEE SHEET A1.03 FOR MORE INFO UTILITY & DAS CHASE TO ROOF ABOVE TRASH CHUTE ABOVE EXHAUST SHAFT ABOVE EXTERIOR BIKE RACK SEMI-RECESSED FIRE EXTINGUISHER

6. DIMENSIONS ARE TO FACE OF STUD, TYP. 7. SEE A2.00 FOR DIMENSIONS TO CONCRETE WALLS & COLUMNS.

PROJECT #:

1617.00

SHEET ISSUE DATE: NOV 11, 2019 REVISIONS:

1S1A

DESCRIPTION

DATE

10' - 0"

STAIR 1 A2.08

16' - 10"

12' - 0"

8' - 0"

9' - 10"

A3.03

6' - 0"

25' - 0"

102' - 8"

LEVEL 1 - PLAN 1

2 16' - 10"

1ST FLR

16'

6.5

6' - 0"

36' - 6"

32'

A2.01

35' - 0"

11' - 7 3/4"

270' - 10"

35' - 0"

11' - 7 3/4"

35' - 0"

11' - 7 3/4"

36' - 6" 11' - 7 3/4"

11' - 7 3/4"

A3.01

1 A2.14

2' - 0"

35' - 0" 11' - 7 3/4"

11' - 7 3/4"

2 A3.02

6' - 6"

35' - 0"

11' - 7 3/4"

2 TYP A2.14

1 OPP A2.14

2' - 0" TYP

2 BR UNIT A

2 BR UNIT A 2 BR UNIT B

2 BR UNIT B

203

204

205

206

207

A3.02

12' - 0"

208

25' - 0"

202

6' - 0"

CORR 202

221

203

201

204

205

213

206

212

211

2T1

A5.04

207

2' - 0"

208 2S2

210

209

B C

220B

220C

ELEV UP

3 BR UNIT A 213

220 220A

13' - 8"

201

2 BR UNIT B

2 BR UNIT ADA

2 BR UNIT C

212

211

210

1 BR UNIT A

15' - 8"

25' - 0"

STORAGE

1 BR UNIT B

209

CORR

25' - 0"

2 A2.13

222 D

D 8' - 2" 2' - 0"

2 A2.09

214

11' - 7 3/4"

1 A2.13

2' - 0" TYP

11' - 9 1/4"

40' - 6"

35' - 4 1/4"

9' - 3"

26' - 6"

146' - 7 1/4"

10.5

12.5

13.1

13.5

12' - 0"

A7.01

3 BR UNIT C

10' - 3 1/2"

215

10' - 0"

2' - 0"

LEGEND

CORR 6' - 0"

2 A5.01

216

12' - 3 1/4"

ALIGN 217

12' - 0"

1' - 10 5/8" CLR

219

2 BR UNIT D

2S1

1 BR UNIT C

3 BR UNIT B

217

218

4' - 0"

216 H

DOWNSPOUT

ROOF DRAIN

KEYNOTES - LEVEL 2

1 2 3 4 5 6

ELEC & DAS CHASE MECH CHASE TRASH CHUTE CANOPY BELOW SEMI-RECESSED FIRE EXTINGUISHER MAINTENANCE SHELVING

12' - 3 1/4"

25' - 0"

2 A2.15

16' - 10"

A6-

23' - 3 1/2"

13' - 1 1/4"

1. SEE SHEET G2.00 FOR WALL TYPES LEGEND.

ITEM ABOVE

6' - 0"

MAINT 219

223

GENERAL NOTES

E RDBUILDING

47' - 10"

1 A2.16

215

11' - 7 3/4"

35' - 0"

9.5

12' - 6"

HOUSING UNITS

11' - 7 3/4"

ALIGN

2 A3.01

11' - 7 3/4"

0' - 5 1/2"

11' - 5"

3 BR UNIT A

2 SIM A2.14

2 A2.16

12' - 0"

1 TYP A2.15

12' - 0"

8' - 4"

63' - 2"

A3.04

2 A5.02

STAIR 10' - 3 1/2"

4' - 0" TYP

214

150' - 2"

A3.03

218

COMMUNITY SPACES

6' - 6"

2. ALL LEVEL 2-6 EXTERIOR WALLS TO BE

M6 T 1

UNO;

SEE EXTERIOR ELEVATIONS FOR SIDING TYPES & LAYOUTS. #

3. SEE ENLARGED PLANS FOR INTERIOR WALL TYPES NOT NOTED. 4. SEE A9.09 FOR DOOR SCHEDULE. 5. GRIDLINES ARE AT CL OF STUD & FACE OF STUD, UNO. 6. DIMENSIONS ARE TO FACE OF STUD, TYP.

PROJECT #:

3 A2.14

16' - 10"

12' - 0"

2' - 0" TYP

3' - 6"

STAIR 6' - 6"

1617.00

SHEET ISSUE DATE: NOV 11, 2019 REVISIONS:

2' - 0"

9730 SE Fuller Road Happy Valley, Oregon, 97086

FULLER STATION HOUSING 90% CONSTRUCTION DOCUMENTS

4.5

25' - 0"

3/32" = 1'-0"

6' - 0"

LEVEL 1 - PLAN

56' - 0"

1 1 A2.01

DESCRIPTION

DATE

3 A2.13

A3.03

12' - 0"

13' - 11 1/2"

8' - 0"

9' - 10"

6' - 0"

25' - 0"

102' - 8"

1 1 A2.02

4.5

3/32" = 1'-0"

2ND - 6TH FLRS 20

LEVEL 2 - PLAN

LEVEL 2 - PLAN 0'

16'

32'

A2.02

6.56.5

36' -36' 6" - 6"

8 8' - 11 8' -3/4" 11 3/4"

11' -11' 2" - 2"

8' 8'

LEVEL 1 - UNIT 2C - TWO BEDROOM PLAN 1/4" = 1'-0"

ALIGN

BEDROOM 1

3' - 53'3/4" - 5 3/4"

2' - 5" 6' - 4" 3' - 1 3/4"

3' - 11" 1' - 6"

CLR

1'CLR - 6" 6' - 4"

1' - 6"

CLR

3' - 11"

2' - 5"

CLOSET CLOSET

3' - 1 3/4"

3' - 1 3/4" 6' - 4"

6' - 4"

U4 U4

K 2K- 2 -

ROOM PROJECT #:LIVING 1617.00 LIVING ROOM

SHEET ISSUE DATE:

K 2K- 2 -

D D

1'CLR - 6"

U7 CPT-1 SV-1

14 OPP 14 OPP

CPT-1 SV-1

1'CLR - 6"

CLR CLR

OPP11 13OPP OPP11A7.01 13OPP A7.01

U2 U2

BEDROOM 2 2 BEDROOM

3' - 1 3/4"

SV-1 CPT-1

U2 SV-1 CPT-1

U7 CPT-2 CPT-1

CLOSET CLOSET

U5 1'CLR - 6"

CPT-1 SV-1

CLOSET CLOSET

1' - 6"

CLR 3' - 1 3/4" CLR 6' - 4" 3' - 11"

12 OPP 12 OPP

N S N S

N SHELF ANDAND N ROD, - SHELF TYPTYP ROD,

DEC 4, 2019

DESCRIPTIONPTHP DATE PTHP

K 0K- 0WRAP EXPOSED - WRAP EXPOSED

REVISIONS:

BEDROOM 1 1 BEDROOM

COLUMNS, TYPTYP N C COLUMNS, N CONC C CONC

D D

12.5 12.5

16' 16' 3

A2.12

BATH 1 1 BATH

K2-

12.5

16'

G 0GA 0 A

ITEM ABOVE ITEM ABOVE

0' 0' 2' 2' 4' 4' 8'

N A N A

KITCHEN A7.01 KITCHEN A7.01

5' - 9" 5' - 9"

11' - 8 1/2"

C C F 4F- 4 -

CPT-1 RF-1RF-1 CPT-1

ITEM ABOVE

5' - 0" 5' CLR - 0" CLR

ALIGN

CONCRETE WALL/COLUMN; PTHP CONCRETE WALL/COLUMN; SEE STRUCT SEE STRUCT

5' - 5" 5' - 5"

U7 U7

N C CONC COLUMNS, TYP

2' - 02'1/2" - 0 1/2"

U4 U4

K 0 - WRAP EXPOSED

ALIGN ALIGN

DINING DINING AREA AREA

CLOSET CLOSET

LEGEND LEGEND

U2 U2

G 0GA 0 A

1' - 6"

3' - 1 3/4" 1'CLR - 6"

1' - 6" 6' - 4" 1' - 6" 3' - 11"

6' - 4"

25' - 0"

CLOSET

14 OPP 14 OPP

2' - 4 3/4"

CARPET IN UNITS CARPET IN UNITS CARPET IN CORRIDORS CARPET IN CORRIDORS RESILIENT FLOORING IN LEVEL 1 UNITS RESILIENT FLOORING IN LEVEL 1 UNITS SHEET VINYL SHEET VINYL LIVING ROOM

2' - 4 3/4"

MATERIAL LEGEND MATERIAL LEGEND

16 16A7.01 18 SIM 18 SIM A7.01 1'CLR - 6"

3' - 1 3/4"

CLR

1' - 6"

9. PROVIDE HARD WIRED DOORBELL AT AT EACH UNIT ENTRY 9. PROVIDE HARD WIRED DOORBELL EACH UNIT ENTRY

ALIGN

LEGEND

BATH 2 2 BATH 17 17

13.1 13.1 18' -18' 5" - 5"

9' - 7" 9' - 7"

ALIGN

13OPP

14 OPP

N A N A

NN 932 932 SF SF

I developed these unit floor plans with particular care to the FHA guidelines for Type B and Type A dwellings and ADA standards.

F 4F- 4 -

N A

ALIGN

K2-

A7.01

5' - 9" 3' - 5 3/4" 8. DIMENSIONS LABELED 'CLR' ARE FROM FACE OFOF FINISH 8. DIMENSIONS LABELED 'CLR' ARE FROM FACE FINISH

CPT-1 CPT-1 U4 CPT-2 CPT-2 RF-1 RF-1 SV-1 SV-1 BEDROOM 2

SHELF AND ROD, TYP

CONCRETE WALL/COLUMN; SEE STRUCT

7. ALL UNITS ARE ADA/FHA TYPE 'B' UNO. 7. ALL UNITS ARE ADA/FHA TYPE 'B' UNO.

OPP11

F 4F- 4 C N A

ALIGN

CARPET IN UNITS CARPET IN CORRIDORS RESILIENT FLOORING IN LEVEL 1 UNITS SHEET VINYL

CLOSET

N S

ALIGN

MATERIAL LEGEND

6. INSTALL LOW HOOKS AT AT ENTRY WAY. 6. INSTALL LOW HOOKS ENTRY WAY.

2' - 4 3/4"

9. PROVIDE HARD WIRED DOORBELL AT EACH UNIT ENTRY

CLOSET

25' - 0"

8. DIMENSIONS LABELED 'CLR' ARE FROM FACE OF FINISH

3' - 11"

7. ALL UNITS ARE ADA/FHA TYPE 'B' UNO.

110

18 SIM CPT-1 SV-1

CLR

1' - 6"

6. INSTALL LOW HOOKS AT ENTRY WAY.

14 OPP

12 OPP

25' -CPT-1 0" SV-1 3' - 11"

A7.01

BATH 1

2' - 4 3/4"

5. DIMENSIONS ARE TO FACE OF STUD, TYP.

1' - 6"

4. GRIDLINES AT AT CL CL OFOF STUD & FACE OFOF STUD, UNO. DINING ARE 4. GRIDLINES ARE STUD & FACE STUD, UNO. A7.01 KITCHEN AREA G 0A 5. DIMENSIONS ARE TOTO FACE OF STUD, TYP. 5. DIMENSIONS ARE FACE CPT-1 OF RF-1STUD, TYP.

BATH 2

6' - 4"

4. GRIDLINES ARE AT CL OF STUD & FACE OF STUD, UNO.

CPT-1 CPT-2

N A

3. SEE A9.11 FOR UNIT DOOR SCHEDULE. 3. SEE A9.11 FOR UNIT DOOR SCHEDULE. CLR

UNO.

5' - 5"

C 5' - 0"CCLR

E 4EA 4 A 2. ALL LEVEL 1 UNIT INTERIOR WALLS TO BE UNO. F 4 2.FALL 4 - LEVEL 1 UNIT INTERIOR WALLS TO BEN AN A UNO. N A

N A

1' - 6"

N A

F4-

3' - 1 3/4"

E4A

3. SEE A9.11 FOR UNIT DOOR SCHEDULE.

CPT-1 CPT-2 RF-1 SV-1

ALIGN

2' - 0 1/2"

G 0A

1. SEE SHEET G2.00 FOR WALL TYPES LEGEND. 1. SEE SHEET G2.00 FOR WALL TYPES LEGEND.

1. SEE SHEET G2.00 FOR WALL TYPES LEGEND. 2. ALL LEVEL 1 UNIT INTERIOR WALLS TO BE

9' - 7"

CLR

GENERAL NOTES

3' - 4 3/4"

10 10

18' - 5"

SIM GENERAL NOTES A8.09 GENERAL NOTES

0' - 9 3/4" 3' - 8"

35' -35' 4 1/4" - 4 1/4"

1 1 SIM SIM A8.09 A8.09

3' - 43'3/4" - 4 3/4"

0' - 9 3/4" 3' - 8"

3' - 8" 3' - 8"

3' - 11"

12.5 12.5 13.1 0' - 9 3/4" 3' - 8"

35' - 4 1/4"

3' - 13'1/4" - 1 1/4"

3' - 11"

2 2 LEVEL 1 - UNIT 2B - TWO BEDROOM PLAN LEVEL 1 - UNIT 2B - TWO BEDROOM PLAN A2.12 = 1'-0" A2.12 1/4" 1/4" = 1'-0" 932 SF

B B G 0GA 0 A

2' - 4 3/4"

F 4F- 4 N A N A

1 1 SIM SIM A8.09 A8.09 34' -34' 4" - 4"

2 2 17 17 BATH BATH

2' - 4 3/4"

1/4" = 1'-0"

12.5

ALIGN

ALIGN U5

SV-1 CPT-1

U7 SV-1 CPT-1

9' - 10 9' -1/2" 10 1/2"

8 0' - 4" 0' - 4"

34' - 4" 987 987 SF SF

5' - 15'1/4" - 1 1/4"

SIM

F 4F- 4 ALIGN ALIGN N A N A

104 104

COAT HOOKS, TYPTYP COAT HOOKS,

5' - 0" 5' CLR - 0" CLR

17' -17' 4 1/4" - 4 1/4"

3' - 8"

KITCHEN KITCHEN

SIM

3' - 1 1/4"

18 18A7.01 16 16 A7.01

DINING DINING AREA AREA

ALIGN ALIGN

N A N A

14 OPP 14 OPP

RF-1RF-1 CPT-1 CPT-1

9730 SE Fuller Road Happy Valley, Oregon, 97086

G 0A

A7.01 A7.01

12 12

BATH 1 1 BATH

CLOSET CLOSET

K 0K- 0 WRAP EXPOSED WRAP EXPOSED CONC COLUMNS, TYPTYP N C CONC COLUMNS, N C

F 4F- 4 - 1 11 11A7.01 13 13N A A7.01 N A

1' - 8" 1' - 8"

SHELF ANDAND SHELF ROD, TYPTYP ROD,

5' - 9" 5' - 9"

CPT-2 CPT-1

1' - 6"

14 14

F 4F- 4 -

B FB 4 N A

1 SIM A8.09

3' - 53'3/4" - 5 3/4"

3' - 1 3/4"

N A

3' - 1 3/4"

F4ALIGN

CLOSET CLOSET

2' - 5" CLR CLR

3' - 11" 1' - 6"1'CLR - 6"

CLR CLR 6' - 4"

3' - 11"

CLOSET

1' - 6"

6' - 4"

25' - 0"

6' - 4"

1' - 6"1'CLR - 6"

2' - 5"

25' - 0" 3' - 11"

U5 CLR

2' - 5"

1'CLR - 6" 7' - 10 3/4"

2' - 5"

BATH 2

B B

LEVEL 1 - UNIT 2B - TWO BEDROOM PLAN

2 A2.12

CLOSET CLOSET

CPT-1 CPT-2

6.56.5

A7.01 17

104

CLRCLR

110

0' - 4"

7' - 10 3/4"

1' - 6"

COAT HOOKS, TYP 10' -10' 2 1/4" - 2 1/4" 9' - 10 1/2" 17' - 4 1/4"

6.5

1' - 6"

3' - 8" 3' - 8"

18 SIM

3' - 1 3/4"

CPT-2

N A N A

CLR

F 4F- 4 -

3' - 5" 3' - 5"

CLOSET

DINING AREA

3' - 1 3/4"

U5 U4

102

CLOSET CLOSET

CPT-1 102

3' - 8"

CPT-1

1 5' - 0"1CLR A8.09 A8.09 5' - 1 1/4"

1' - 8"

1 1 LEVEL 1 - UNIT 2A - TWO BEDROOM PLAN LEVEL 1 - UNIT 2A - TWO BEDROOM PLAN A2.12 = 1'-0" A2.12 1/4" 1/4" = 1'-0" 987 SF

ALIGN

5' - 1 1/4"

CLR

3 3

ALIGN

2' - 5" 2' - 5"

CLR

14 OPP

A7.01

4' - 0" 4' - 0"

CLRCLR

SHELF AND ROD, TYP

RF-1 CPT-1

BATH 1 1 BATH KITCHEN

N A

4' - 0" 4' - 0"

ALIGN

ALIGN U7 2' - 0"

CLOSET

1' - 6"

N A

G 0GA 0 A 9' - 11" 1 S B 9' - 11" 1

SV-1 CPT-1

CPT-1 RF-1

2' - 5" 1' - 6"

BATH 1

F4-

3' - 8"

10' - 2 1/4"

4' - 0"

CPT-1 110 CPT-2

3' - 5"

A7.01

17 17

BEDROOM 2 2 BEDROOM

FULLER STATION HOUSING PERMIT SET

2' - 5"

2' - 5" 2' - 5"

F4-

A A

LIVING ROOM LIVING ROOM

BEDROOM 2

K0WRAP EXPOSED CONC COLUMNS, TYP N C

18 18A7.01 16 16 A7.01

- 6" CPT-2 CPT-1 3' - 1 3/4" 1'CLR

10'B-10' 2 1/2" - 2 1/2"

U5 U5

5' - 9" 15 15

CPT-2

N A

U5 U5

CLOSET CLOSET

PTHP PTHP

BEDROOM 1 1 BEDROOM

U4 U4

CPT-1 SV-1 3' -CPT-1 5 3/4" SV-1

BATH 2 2 BATH

3' - 1 3/4"

F4-

CLR

4' - 0"

3' - 1 3/4"

0' - 10"

ALIGN ALIGN

B B

4'CLR - 0"

CLR

1' - 6"

CLOSET

BATH 1

N A N A

CLR

13 SIM 13 SIM

BEDROOM 2 2 BEDROOM

SHELF ANDAND SHELF ROD, TYPTYP ROD,

CLR

CLOSET

F 4F- 4 -

SIM12 12 OPP SIM12A7.01 12 OPP A7.01

U2 CPT-1 SV-1 U2 CPT-1 SV-1

CLOSET CLOSET

25' - 0"

2' - 5"

CLR

1' - 6"

7' - 10 3/4"

A7.01

10' - 4"

11 OPP 11 OPP

LIVING ROOM

3' - 11"

N A N A

CPT-1 SV-1

G 0GA 0 A

4BEDROOM 1

6' - 4"

25' - 0"

F 4FA 4 A

PTHP

4' - 0"

SHELF AND ROD, TYP

CLOSET

3A7.01 A7.014

2' - 0"

LIVING ROOM LIVING ROOM

A A A

BEDROOM 1 1 BEDROOM

5' - 1 1/4"

KITCHEN KITCHEN

3' - 8"

3' - 5 3/4"

9' - 3"

G 0A

5' - 9" 9' - 3"

CONC COLUMNS, TYP N C N C CONC COLUMNS, TYP

A A

5' - 9"

BEDROOM 1

K 0K- 0WRAP EXPOSED - WRAP EXPOSED 9' - 2"

9' - 2"

ALIGN

11' -11' 2" - 2"

11' - 2"

A A

11' -11' 2" - 2"

11' - 8 1/2"

11' - 2"

10 10

35' -35' 0" - 0" 11' -11' 8 1/2" - 8 1/2"

11' - 2"

8 8 10

35' - 0"

SV-1 CPT-1

3 3 6.5

13.1 N 1 - 1UNIT 2C 2C - TWO BEDROOM PLAN 3 LEVEL LEVEL - UNIT - TWO BEDROOM PLAN

A2.12 = 1'-0" A2.12 1/4" 1/4" = 1'-0"

956 SF

LEVEL11'1-11'8- 1/2" -TWO 8 1/2" BEDROOM UNIT PLANS

A2.12

13.1 13.1

NN 956 956 SF SF

THREE BEDROOM TOWNHOUSE Selected project from previous firm Programs used: Revit, Photoshop, Illustrator, InDesign, Powerpoint This is a conceptual design of a three-bedroom townhouse.The client plans to use the design to build a neighborhood of family townhouses in a military base in Japan.This townhouses will vary in square footage, and will be joined in duplexes and triplexes, as modeled opposite. But all townhouses will retain the same design language, influenced by modern Japanese home design. My role in the project was Technical Lead. I was involved in all three stages of project execution. STAGE 1 I conducted a series of interviews and home tours with current residents at the military base to determine their needs and preferences for housing, and to investigate the issues of current housing on base. I drafted hand drawn plans, sections and elevations on site in a collaborative charrette display with the clients and users. I sought input from the clients and current residents in order to choose a preferred alternative. STAGE 2 I modeled the preferred alternative in Revit. I developed the conceptual designs into drawings and renderings for a Customer Concept Document report. STAGE 3 I presented the draft version of the report and large format drawings on site to clients, and solicited critiques of the design. I then incorporated client suggestions in the next iteration of conceptual design documentation in Revit.

UNIT A

UNIT B UNIT C

Rendering of three townhouses joined as a triplex. 1721

23' - 0"

G arage 417 S F

C lose t

36 S F

40' - 0"

C lose t

37 S F

31 S F UP

The first floor features a small foyer for shoe removal and storage (a common feature in Japanese houses) and a family room separated from the main living area on the second floor, which can be used for personal storage, a kid’s playroom, or even a home business such as a hair salon. There is generous storage here for outerwear and other belongings.The garage is suitable for one car but has ample storage space.The second floor is the most flexible space, containing the kitchen, dining and living areas.The stairs open into the dining/living space, where furniture can be arranged in any configuration easily.The kitchen features a stove top island, leaving plenty of usable counter space along the edges.There is a breakfast nook in the rear, and a balcony space in the front that connects the resident to the street frontage, while maintaining a sense of semi-privacy.The third floor features the three bedrooms. The master bedroom is not separated from the other bedrooms, but placed on the same level, which was a request of many current residents.The laundry room was given ample depth for useful and abundant interior storage.

F amily R oom

190 S F

Foyer

71 S F UP

P atio

40 S F

1 FLR ST

B reakfas t Nook 55 S F

K itchen 168 S F

P antry

B edroom 2

B edroom 3

106 S F

9 SF

Dining

1/2 B ath

C lose t

L inen

Hal l S pac e

C lose t

36 S F

13 S F

4 SF

80 S F

17 S F

78 S F

S tairs

48 S F

18 S F

S tairs DN

B athroom

L aund ry

35 S F

S hower

M . C lose t

18 S F

26 S F Hal l S pac e

118 S F

2 FLR ND

36 S F

264 S F

C lose t 7 SF

21 S F

M. B ath

L ivi ng R oom

41 S F

Mas ter B edroom 202 S F

B al cony

M . S ho wer

49 S F

27 S F

3 FLR RD

View of the open kitchen from the stairs.

2427

View of the open dining and living spaces, including the balcony.

Snapshots of Revit model I created. I devised a specialized roof framing system for this unique form by angling beams, rafters and decking. 28

CHARBONNEAU GOLF COURSE OUTDOOR PAVILION Selected project from previous firm Programs used: Revit, SketchUp Charbonneau Golf Course commissioned our firm to design an outdoor pavilion meant for weddings, parties and other social gatherings. My role on this project was to model the surrounding site in SketchUp for research and conceptual design purposes.Then, I expanded on the Revit model of the pavilion by structuring the specialized roof framing. I angled the roof beams, rafters and decking to create the striking and unique roof form. I also contributed to other parts of the model, such as the custom luminaire, fireplace details, and furniture placement.

1830

Opposite: Interior snapshot of Revit model, showcasing event furniture and detailed roof decking. Above: Photo of the completed pavilion. 31

FREEHAND SKETCHES Media Used: Watercolors, marker pens, fountain pen, color pencils, Apple pencil, Photoshop

Skyline of Shanghai

Houses in Xidi, a UNESCO World Heritage site in Anhui, China 32

Butternut squash cross section

Digital art of my nephew

House of Geoffrey Bawa, Sri Lankan architect 33

Thank you!

ZETA FERNANDO znfernando787@gmail.com (503) 720 2884