ZIP H2Lure Tree Mount Kit Installation Guide
For detection and prefeeding
Tree Mount kit includes
[1] Tree Mount Plastic Bracket
[2] Metal Cover
[3] 14G × 50mm TEK Screw × 2
[4] Bolt
[5] Hex Nut
[6] ¼ Half Nut
You will need (not provided)
[7] H2 Lure Battery drill
Gloves
1. Select a suitable place to install the H2Lure. If using with a trail camera, remove vegetation that could falsely trigger the trail camera.
2. Secure the plastic tree mount to the tree using the two TEK screws.
3. Remove the domed end cap from the H2Lure.
4. Place the H2Lure into the plastic tree mount piece with the nozzle pointing down.
Align the lure level scale with the cut-out in the base of the tree mount plastic piece. This will ensure that the scale will be visible when the cover is on.
Hand-tighten the half nut to the nozzle at the base. Take care not to over-tighten.
6. Use the plastic clips on the tree mount piece to attach the stainless steel cover, while checking that the lure level scale can be viewed through the cover.
7. Secure the stainless steel cover using the bolt and hex nut provided.
Quick Guide
Attach the plastic tree mount piece to a tree using the two TEK screws.
Remove the domed end cap from the H2Lure, and place the H2Lure into the tree mount plastic piece, with the fill level scale facing out.
Hand-tighten the half nut to the nozzle at the base.
Fit the metal cover, using the plastic clips on the tree mount piece, and secure with the bolt and hex nut.
Troubleshooting
It can take up to two weeks for the mayonnaise to begin dispensing from the H2Lure. The hydrogen cell is turned on when the device is rotated with the lure scale the right way up. You may wish to rotate the device to turn it on before you deploy it. Alternatively, you can take another source of mayonnaise with you to place around the site until the H2Lure begins to dispense. We recommend Best Foods/Hellman’s brand egg mayonnaise.
If the device fails to dispense two weeks after being rotated, get in touch with us at products@zip.org.nz
The H2Lure will last a minimum of 10 months. Additional devices are available to purchase as required. Contact products@zip.org.nz.
The H2Lure and Tree Mount kit are both covered by a six-month warranty.
Empty H2Lures can be returned to us for refilling. Contact products@zip.org.nz for more information.
This installation guide is current as at June 2025.
From time to time, we may make improvements – check out our website, zip.org.nz, for the latest version!
If you would like to share your feedback or suggestions, please contact us at products@zip.org.nz.