STOOL DESIGN | DEVELOPMENT

Stool 2 | Optimization of waxing technique

For the problem of texture loss caused by the previous operation of brushing wax on the fabric, a technical improvement has been made at this stage.

It is difficult to maintain the high temperature of the wax liquid by first melting the wax into a wax liquid and then brushing it on the fabric, so the wax liquid can only soak into the shallow layer of the fabric which would cause the loss of texture.

The solution to this problem is to paste warm wax on the surface of the fabric first, then use a heat gun to melt the wax and make it soak into the deep layer of the fabric in a high-temperature liquid state.