Skip to main content

XLOCK Cylinder PZ30_Mounting Guide

Page 1

XLOCK Cylinder PZ30 XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


ACCESS LOCKED SPACES WITH… … YOUR SMARTPHONE VIA BLUETOOTH. … ALREADY EXISTING ID CARDS. … PERMANENT AND TIME-BASED PIN CODES. … YOUR FINGERTPRINT.

Access management via XLOCK Lock Manager App

.


CONTENTS

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 1 TO 3

STEP 1: Take out the screw on the side of the door as shown above. IMPORTANT: Put the screw on the side!

STEP 2: Grab the cylinder and slide it out.

STEP 3: The cylinder is taken out.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 4 TO 6

STEP 4: Measure the thickness of your door.

STEP 5: Set the cylinder to the length to fit the door thickness.

STEP 6: Loosen and fasten the screws to adjust the length.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


ADJUSTING THE CYLINDER

40 mm 45 mm 50 mm 55 mm

30 mm 35 mm 40 mm 40 mm

45 mm 50 mm 55 mm 60 mm

40 mm 40 mm 40 mm 40 mm

30 mm 30 mm 30 mm 30 mm

35mm 40 mm 45 mm 50 mm

Door thickness: 35-110 mm XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 7 TO 9

STEP 7: Use the mechanical key to open the front of the lock.

STEP 8: Take off the front lid.

STEP 9: Insert the 4 x AAA Lithium batteries. IMPORTANT: Take a close look at +/- of the batteries.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 10 TO 11

STEP 10: Put the lid back on the knob.

STEP 11: Use the mechanical key to close the knob.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 12 TO 13

STEP 12: Insert the cylinder in the door.

STEP 13: Make sure it is taken through the hole door.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 14 TO 15

STEP 14: Use the screw again that you put aside in STEP 1.

STEP 15: Tighten the screw to fasten the cylinder.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


MOUNTING – STEP 16 TO 17

STEP 16: Insert the smaller interior knob.

STEP 17: Use the small screw and tool to fasten the interior knob.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


CONGRATULATIONS.

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


XLOCK LOCK MANAGER APP – SET UP IN THE APP.

SCAN TO UNLOCK

XLOCK by data mobile / Thomas Vogler ⋅ Landstrasse 35-39 ⋅ 6911 Lochau ⋅ Austria ⋅ www.xlockgroup.com


Turn static files into dynamic content formats.

Create a flipbook
XLOCK Cylinder PZ30_Mounting Guide by xlockgroup - Issuu