PRO: Vinyl floors are relatively easy to put in

Luxury Vinyl Tile Flooring: Pros & Cons of Vinyl Flooring

Vinyl Tile Singapore Vinyl tiles Singapore are the finest sort of resilient flooring (a category that also includes linoleum and cork) because it’s low-maintenance, water-resistant, cost-effective, and long-lasting. It also has the right balance of firmness and “give,” meaning it springs a touch once you walk thereon for a cushy feel underfoot. And because of recent technological advances, today’s vinyl floor tiles come with a wide selection of high-quality, beautiful finishes.

Vinyl Flooring Singapore But vinyl flooring does have its downsides. So whether you’re considering installing vinyl flooring at home or wondering what it takes to get rid of an existing vinyl floor – go through.

PRO: Vinyl floors are relatively easy to put in Developments within the vinyl flooring industry have made the merchandise more DIY friendly.

While vinyl was once only available in large, unwieldy sheets, today’s tiles and planks are much easier to put in with no sawing or hammering. The best waterproof Vinyl flooring brands in Singapore are now offering “self-adhesive” vinyl—just remove the backing and press it inside the pre-fixed subflooring.

Here’s a general idea of the way to install vinyl plank flooring:  Level and smooth the underlayment (the layer the vinyl will adhere to).  If you would like to trim any planks to suit your space, do so with a utility knife.  Remove the backing and start laying the planks, ensuring a decent seam between planks for the simplest results.  Use a hand roller to strengthen the adhesive bond once each plank is laid.

CON: Vinyl floors are often tough to get rid of Once vinyl’s adhesive backing hardens to the floorboards, the glue is difficult to get rid of.

Fortunately, removing vinyl floors doesn’t require professional tools or techniques; it’s all about effort.

• Clear the space of furniture and take away baseboards and trim if possible.

• Cut vinyl into 12-inch strips, employing a utility knife. Manually pull up the flooring strip by strip.

• To remove all remaining glue from the floorboards, mix an answer of 1 tablespoon of liquid dish soap in one gallon of water and apply to attach. Let it sit for a half-hour to melt it, then go at it with a scraper. Tip: Apply direct heat from a hairdryer to stubborn spots, just long enough to melt them.

• Alternatively, you'll rent an influence scraper at your local home center. Make certain to ask how the settings work and test the device on a little patch of flooring first. You aim to get rid of the vinyl-and-glue layer without damaging the subfloor.

• Vacuum up all the debris.

Xing Tek Flooring Pte Ltd 1 Tampines North Drive 1 #09-11 T-Space Singapore 528559 Tel : +65 6702 5271

Fax : +65 6702 1580 Mobile : 65 9652 9079 (Whatsapp only) Email: sales@xingtekflooring.com

Website: https://www.xingfloors.com/

This Presentation is Prepared by “Xing Tek Flooring Pte Ltd”