Looking to improve productivity

Looking to improve productivity?

COLLAR-BASED RUMINATION MONITORS

&

HEAT TIME HORIZON SYSTEM

Stand-alone heat detection using Long Distance Technology

ACTIVITY MONITORS TO DETECT OESTRUS

=

www.wynnstay.co.uk

Wynnstay products that could be eligible for grant funding under the countryside productivity scheme in ENGLAND

BRITISH FARMER!

Heatime Horizon is a stand-alone heat detection system for dairy farmers wishing to improve farm efficiency & profitability by improving their breeding program.

Heatime Horizon is based on the same motion sensing technology as the traditional Heatime system but uses Long Distance Technology to transmit data in real-time and not just at milking times. This allows for earlier heat detection across the herd.

Increased productivity & profitability • Accurate heat detection rate - up to 95% achievable • Health & irregular cycling cow reports • Perfect solution for combining both cows and heifers • Real-time transmission of accumulated data • SMS alerts available • Continued development of tag firmware - can be updated

wirelessly with tag still on the cow • Modular system – can be developed further • Large farm compatibility • Multiple antenna stations • Up to 1,000 tag capacity Functionality and usability • High & low activity monitoring • Easy to use touch-screen interface • Built-in herd management package with individual

cow reports • Operates up to four automatic 2 or 3 way sorting gates • Group management • Customised reports • Up to one years individual cow data storage • Automatic daily back-up • USB Connection • Multi-language support

DEVICES FOR ON-FARM ANALYSIS OF LIVESTOCK FOODSTUFFS AgriNIRTM NIR FORAGE ANALYZER check the feed of your livestock anytime you want AgriNIR™ is a portable NIR forage analyzer that quantifies the percentage of moisture (dry matter), crude protein, starch, ADF, NDF and ash of the plant material being analyzed in seconds.

Now you can analyze the feed for your livestock everyday and adjust your cow’s the diet in real time. Farmers and nutritionists, a well as consultants will be able to perform a full analysis of their forage on site (stall, silage pit, field), in any weather and have the analysis printout with the resuls in 60 seconds. The feed analysis becomes a daily routine. The forage analyzer is pre-loaded with NIR calibration curves for 7 NIR Families (Crop Families) and with a total of 44 curves.

Other crop families and calibration curves can be supplied on request by the producer, Dinamica Generale Srl.

2

•

ANALYSIS PERFORMED ON-SITE: in field, in the stall, on bio-gas plant, in the warehouse stock, on the weighbridge/vehicle scale.

•

ANALYSIS PERFORMED CONDITIONS

•

ANALYSIS PERFORMED IN LESS THAN 60 SECONDS

•

EXTREMELY EASY TO BE USED – NO NEED OF ANALYTIC EXPERTISE

•

LOW ANALYSIS COST NO DIRECT COST PER SINGLE ANALYSIS

•

NO SAMPLE PREPARATION – NO SAMPLE PRE DRYING – NO SAMPLE WASTE

•

COMPACT AND ROBUST TO BE TRANSPORTED

•

POSSIBILITY TO PRINT TICKETS WITH ANALYTIC RESULTS

IN

EVERY

WEATHER

SOFTWARE DTM™ SUITE DTM is feeding management software developed with farmers in order to satisfy their needs.

DTM is the evolution of a feeding software management as a professional, user friendly and integrated solution for farmers.

All farm activities are controlled with a single innovative tool.

An easy way to monitor and decrease costs and increase profits.

FEATURES & ADVANTAGES • Accurate control of feed costs, dry matter intake and refusal management • All processes are traceable, starting from raw material storage up to ration quality control/check • DTM software is flexible, friendly and allows better management of raw materials due to accurate loading • Full control of feeder(s) work • Accurate control of operations means more productivity and financial benefits for the farm • Control stock and purchasing planning at best • Detailed data report and graphs for statistical control • Ability to take actions in advance • Feed Efficiency ratio (quantity of milk per cow per day/ quantity of dry matter per cow per day) • Wifi wireless communication with no distance limits • Cloud-based system to store data on a remote server making it impossible to lose data.

• Access available from your smartphone or tablet

STATIC HANDLING AND WEIGHING SYSTEMS PEGASUS 2 FOR LOADERS Weighing system for wheel/front loaders and telescopic to weigh the material during the load in dynamic mode with accumulation management.

Measuring the oil pressure in the lift cylinder is possible to understand the weight in the tool (bucket, hook, grab).

The system is designed to operate in tough environments. Production data can be printed on our printer or stored on a memory card and then transfer and manage them easily from your PC in the office through the Pegasus Trace.

FEATURES & ADVANTAGES •

Easy and cheap solution with the best technology

•

Works ON EVERY VEHICLE

•

Strong and waterproof for difficult environmental conditions or to be used also in vehicles without cab

•

Useful and easy keyboard

The system is composed of:

•

Comes with printer port to connect plug & play our printer where a ticket is requested

•

Pegasus 2 Indicator

•

Automatic load accumulation up to 256 weighing for a total of 999 tons

•

N° 2 pressure transducers 500 bar

•

N° 2 proximity sensors

•

Live weight reading

•

Mechanical support for proximity sensors

•

Edit of components name, customers and operators

•

Power cable

•

Automatic motor revolution compensation

•

Sensor connection box

•

Overload logging and overload warning

•

Sensor cable

•

Easy and immediate calibration set

•

Fine calibration to obtain the best from your system

•

LCD Display with backlight for easy reading

•

Multiple info shown on the LCD display

•

Up to 10 data sets for easy selection of your attachment

•

Double pressure transducer for an high accuracy

•

Dynamic mode to have weighing without interfering with the operators work.

•

Save time and reduce costs avoiding the operator to drive from the load area to the weigh bridge (in truck loading).

www.wynnstay.co.uk

3

ELECTRONIC WEIGH SYSTEMS Electronic weighing has created a much more accurate and faster generation of weighing.

Clamp or bolt your loadbars onto a crush or platform and once connected to a digital head you can begin weighing.

No more guessing what the weight is whilst the old style mechanical clock needle jumps around- the weight is shown clear and precise on the LCD display.

We would recommend using MP (multi purpose) loadbars If you need to move your crush/platform around or HD (heavy duty) if you want to bolt your crush/platform to the floor and never have to worry about it moving out of place again.

Different sizes of loadbars are available - depending on your application.

There are a variety of digital weigh heads- from the basic one only able to display weight. Up to the most advanced, which can record, store and retrieve individual animal weights, tag numbers, allow input of dam/sire, medical records and can be linked to an EID panel reader at a later date.

All weigh heads come complete with an in-built rechargeable battery.

• • • •

•

4

Built in Bluetooth Calculates live weight gain Stores up to 100 sessions and 15,000 records Comment text field to capture animals traits and treatments Fast charging

EZIWEIGH 5

61773

EZIWEIGH 7

61774

• • • • • • • • • • • • • • • • •

Iconix Weight Indicator & 600mm Loadbars Two weighing modes-Free & Hold Auto zero at switch on Auto zero tracking Weatherproof case Mounting brackets included External 12V battery power source –lead supplied ±0.5% of displayed reading accuracy 2000kg weight limit Low battery indicator Low voltage auto shutdown Tough, rust protected steel Under platforms, crushes & crates Heavy duty 6m cables Shock absorbing rubber mounts Fully waterproof Weigh up to 2000kg

Iconix Weight Indicator

39030

Iconix 600mm Loadbars

39033

3000kg capacity Especially suited for use under a cattle crush

TRU-TEST Multi-purpose Loadbars 600mm - 2000kg

61775

TRU-TEST Multi-purpose Loadbars 800mm - 3000kg

61776

TRU-TEST Heavy Duty Load Bars 800mm – 3000kg

54836

TRU-TEST Multi-purpose Loadbars 1010mm - 3000kg

61777

TRU-TEST Heavy Duty Load Bars 1010mm – 3000kg

54835

CHIEFTAIN, SARACEN OR CENTURION FULL ACCESS CATTLE CRUSHES

WEIGHING SOLUTIONS

Chieftain, Saracen & Centurion refer to the different yoking systems i.e. the front of the crush.

Chieftain: is a modern type yoking system, that comes in from the side, like a pair of scissors and as such the animal in the crush doesn’t see the yoke until it is yoked. This yoke is popular with Dairy, Suckler and young stock, (including horned animals). The yoke will close down to 100mm allowing calves to be safely yoked.

Chieftain Full Access Crush

47290

Saracen: is a self locking yoke system and is generally only recommended for beef animals. Not suitable for horned animals.

Saracen Full access Cattle Crush

Wynnstay are now able to offer a range of practical weighing solutions from Italian manufacturer Dynamica Generale.

Dynamica Generale produce a range of weighing equipment designed to increase the accuracy and efficiency of feeding, weighing cattle and the weighing of imported and exported forage and manure from the farm.

Pegasus 2 is an on board pressure weighing system that can be retro fitted on any telescopic handler, loading shovel or front end loader. The main benefits of being able to weigh raw materials when loading a mixer wagon for example are; less running around between raw material stores and greater accuracy when loading. Greater accuracy means reduced costs and improved animal performance.

The regular weighing of fattening cattle and dairy heifers is essential if target growth rates and weights are going to be achieved. This important but yet quite often neglected task can now be made easier with the Taurus livestock weighing system. The Taurus livestock weighing and data management system allows for non-stop walk through weighing, identification and recording of animal weights.

If you are looking to update your feeder wagon weigh scale and want more control over the way your cows are fed look no further than the proven feed management system DTM. It’s not just a scale, the DTM system allows you to manage the whole feeding process on your farm including recording of feed use, feeding times, loading accuracy and stock control. The flagship Top Scale system can store 148 diet formulations all of which can be accessed by wireless connection and managed remotely over the internet.

Changes to diets can be made simply and easily depending on animal performance, ingredient availability and ingredient quality. The system ensures that your animals are always getting the right diet optimising performance and improving your margins.

www.wynnstay.co.uk

30451

Centurion: is the old fashioned type yoke similar to what was on the Urry (Tubar) cattle crushes. Suitable for all animals.

Centurion Full Access Cattle Crush

30452

All these yoking systems have optional adjustments: •

The bodies of the crush (rear). Give you various options; On all the above yoking systems you can have:

•

A full Access: Popular with dairy units, whereby you have full access if the vet wanted to do a caesarean.

This crush is also now available as a suckler crush without the angled tray. Better for foot trim.

•

Rotating Rump Bar: A popular choice when going to a race, the rotating rump bar allows the animal to be held forward in the body of the crush. A safety feature, whereby it is operated from the side of the crush.

•

Dual Width: a popular crush for sucklers, in particular where mixed age groups are being handled together, each side of the crush pivots in 100mm. So suitable for all size animals.

•

Belly Clipper: This crush was developed with the Health & Safety executive to conform to health & Safety whilst Belly Clipping. This features a rotating rump bar as standard and an anti kicking bar.

5

EMPIRE CATTLE CRUSH

WELLAND CATTLE CRUSH

An ideal all round cattle crush, perfect for routine work such as tagging, injecting and TB testing. This galvanised steel cattle crush comes with an adjustable width yoke, sliding access gate, anti-slip battens, galvanised chequer plate floor, 3 point linkage and a backing up bar. It has a 9mm thick rot resistant Stokbord速 clad side for noise deadening.

Welland Cattle Crush

47458

This heavy duty galvanised heavy duty cattle crush is ideal for general routine cattle work. The yokes contain a TB door as standard for easy neck access.

6

Empire Cattle crush

83651

TAMAR CATTLE CRUSH

UNIVERSAL CATTLE CRUSH

Universal Cattle Crush

This multi-purpose galvanised cattle crush is ideal for cattle handling. It comes equipped with a TB door on the yoke as standard. Foot trimming equipment can be added.

21816

This unique cattle crush is a multi task crush with drop down rump bar, capable of handling all sizes of animals from calves to bulls, it comes with hydraulic chin lift. It will restrain dairy animals from approximately 90kg to 1200kg.

Tamar Cattle Crush

47468

WARRIOR CATTLE CRUSH

AMBASSADOR CATTLE CRUSH

Sits between the Economy and Crusader cattle crushes specification wise Features include: • Manual traditional lever operated yoke handle can be positioned on either side • Spring loaded quick release adjustment on the yoke gives 4 preset widths from 100mm to 250mm • The front cage is made up of one fully opening side gate, a front gate and a fixed side panel giving access to the animals head from the front and one side only • Bolted construction timber floor • Traditional backing up bar facility supplied with rear gate as standard three point linkage • Simple sliding access on one side only (top front quarter) • Approximate weight 282kg Warrior Cattle Crush

A general purpose cattle crush with fully adjustable neck yoke, drop down rump bar and full access gates. It is suitable for animals of different size and ages. From weights of 350kg to 1000kg. This crush is suitable to add a foot trimming kit and optional chin scoop.

Ambassador Cattle Crush

21815

DEVON CATTLE CRUSH Galvanised cattle crush with adjustable width automatic neck yoke and drop down rump bar. Will restrain animals from 300kg to 1000kg. It will facilitate a foot trimming kit and/or a chin scoop. Chin scoop is ideal in blousing, or dosing animals.

27706

Devon Cattle Crush

15320

AMBASSADOR MANUAL SQUEEZE CRUSH The Ambassador manual squeeze crush has been designed very similar to the original ambassador cattle crush. The yoke has been kept exactly the same but this crush has a newly designed side rail and doors, incorporating the easy ‘pull open and slam to shut handles. The rear door has been replaced by a manually operated sheeted sliding door. The width can be altered by the operating wheel, it can give a different width of crush for every animal. This allows infinite adjustment in sizes from 750mm to 300mm. This crush is suitable for animals from 50kg to 1200kg. A chin scoop can be added on to this crush.

Please call us for more details. www.wynnstay.co.uk

7

HYDRAULIC CATTLE CRUSH

CATTLE HANDLING TRAILER

This hydraulic cattle squeeze crush has been designed with the safety of the animal and the operator in mind. The hydraulic yoke can be adjusted to vary the width before and after the entrapment. The yoke doors are protected with thick rubber strips to grip the animals neck more comfortably.

The tandem sides will hydraulically squeeze the animal into position of comfort and restraint. The swinging beam with controls to hydraulic function can be positioned to the rear, side or front of the crush to avoid distraction to the animals entering or exiting the crush.

Hydraulic Cattle Crush

The cattle handling trailer is designed to enable a handling system to be towed behind a tractor and assembled in a yard or field as required to avoid the need to move cattle.

This system is based on the Tamar cattle crush and come with a hand operated hydraulic chin lift and drop down rump bar. The handling trailer comes equipped with eight cattle hurdles to form a race or holding pen. The drawbar is retractable, making it easy to move the trailer.

Please call for more details.

54186

‘call us for a quote or more information on Bespoke Cattle Handling Systems’

8

CALVING DETECTORS VEL’PHONE CALVING ALERT

“

TEXT A E V I E C RE OUR COW Y N E H W LVE! A C O T S START

250 dairy cows,replacement heifers and a flock of breeding ewes doesn’t leave much time for leisure at Shordley Hall farm, so two years ago Richard Pilkington decided to invest in Vel’phone Calving Alert technology.This saves on the time spent checking the dry cow yard,day and night.

The system works with radio waves from a central control box, and with 350 calvings per year , 7 temperature probes are sufficient to monitor every cow calving,on an all year round basis.

Richard inserts the probes a week before the predicted date and waits for a signal to be sent to his phone. A rise and fall in temperature sends a ‘ 48hr alert’,and when she starts pushing out the water bag,the probe hits the ground and sends a final ‘text alert’. Most cows calve within an hour of this final alert.

Richard sets a ‘time delay’ for night time calvings and says ‘it’s a reliable system, 99% of the time the cow is at the point of calving as I come into the shed’. Somebody is always on hand if the cow is having difficulty,and we can attend to the cow, the calf and colostrum at the same time.

Robust, effective solution based on analysis of the temperature of the animals in order to carry out remote monitoring of calving.

Once the thermometer has been placed in the vaginal canal, the Vel’Phone informs you via SMS of the day-to-day changes in temperature, of the imminence of calving, and of the breaking of waters.

Day and night and anywhere, you will remain free and have peace of mind because the Vel’Phone is monitoring your animals.

Calving prediction via SMS invites you to place the animal under optimal conditions before its waters break. Detection of the breaking of the waters via SMS provides you with the greatest accuracy in order to leave the animal to do the work first, and then intervene at the optimal time. Ultimately, you will improve your stock breeding results with more living calves and fewer post-partum complications.

TESTIMONIAL RICHARD PILKINGTON SHORDLEY HALL FARM, HOPE, WREXHAM

STEP 1

STEP 2

STEP 3

STEP 4

STEP 4

Thermometer is placed in the animal

Thermometer registers temperature rise

Typical variation in the animal’s temperature

Thermometer expelled by water bag

Calving begins

SMS message Thermometer activated*

SMS message Calving expected within 48 hrs

SMS message Thermometer expelled

*Once the thermometer is activated the animal’s temperature is sent by SMS once or twice a day at the selected times.

5 year guarantee Owners of the Medria base unit have the option of adding Heatphone(oestrus detection) and Feedphone (rumination detection). www.wynnstay.co.uk

9

BELLA AG BOLUS

Realtime body temperature monitoring for cows The BellaAg bolus is an exciting addition to the Wynnstay portfolio of products. The bolus which resides in the reticulum of the cow, records the cows core body temperature every 15 minutes for 4 years providing an up to date picture of herd health. Tell-tale increases in core body temperature can give an early indication of ill health up to 48 hours before the observation of clinical signs or symptoms. Implementing treatment earlier can result in an improved prognosis and reduced veterinary costs.

The BellaAg software flags up cows with raised body temperatures for attention which enrols the cow on a standard treatment protocol which begins with a detailed ten point check (Table 1). Adopting bolus technology has been shown to reduce treatment costs, the value of milk discarded as well an increase milk production and cull value.

Different conditions generate different temperature patterns which can be used as a primary diagnosis by an experienced operator. In future it is predicted that data generated by the bolus will be used to detect signatures of heat.

‘Implementing treatment earlier = an improved prognosis and reduced veterinary costs’ BellaAg 10 point check protocol 1.

Mobility

2.

Temperature

3.

Rumen Function

4.

Displaced Abomasums

5.

Ketosis

6.

Head and Eyes

7.

Heart and lungs

8.

Excrement

9.

Uterus

10.

Mastitis

Table 1.

With these innovative products Wynnstay are demonstrating that they are serious about providing its customers with the tools they need to improve performance and profitability.

Provides you with the most useful “on-the-farm”

the industry.

Bella Ag Temperature Bolus 3.0 is administered orally, and once ingested the bolus gathers and transmits current temperature & ID readings.

based cattle health reporting tool in

Bella Ag Temperature Software easily installs on computer and works along side the most popular herd management software packages.

The software analyses the temperature data collected from your cattle and sends you automatic temperature alerts, these lists can be printed, emailed or sent to your phone.

Table 1.

Overall benefit, but are not limited to: • Control illness and disease with early detection • Reduce treatment costs and somatic cell counts • Improve estrus detection • Increase pregnancy rates

10

• Increase production • reduced mortality rates • Lower labour and vets costs • Eliminate manual temperature checking

For more information call

t: 01691 662690 or visit www.wynnstay.co.uk/bellaag.html

LIGHTING ENVIRALIGHT SERIES DAY-LIGHTER The new Day-Lighter (with optional Moon-Lighter) series of lighting combines the proven technology of Induction and LED, housed in the most robust IP 65 (listed for wet location) fixture and optical lens.

Using the proven and sound research by many of North America’s universities, the VES Day-Lighter, Mood-Lighter and Enviralight control will help improve the milk production with proper lighting levels whilst using the least amount of energy.

An expert team of engineers will design your farm to have 20’ candles over the feeding area and 10’ candles over the bedding area. In addition, we will analyse your other building for internal and external lighting needs. Our Enviralight control or Dairy Select control can control the lights for long day and short day listing. Sensors provide buildings with light harvesting poly carbonate walls to accurately sense when natural light is strong enough to provide adequate lighting levels. Sensors allow the controls to shut off the area of lights to provide the most economical conditions.

‘help improve milk production with proper lighting levels while using the least amount of energy’

www.wynnstay.co.uk

Induction lighting technology is over 100 years old and has been very popular in Europe where energy rates are extremely high. The features of the Enviralight series make it the right technology at the right time.

Day-Lighter: •

Since induction lighting does not have filaments, electrodes or met end caps to seal the ends it does not have the components that cause florescent lighting to breakdown prematurely. This is why the VES Day-Lighter Induction rates for over 100,000 hours of life

•

Very high energy conversion efficiency of up to 90 lumens per watt

•

Minimal lumen depreciation compared to other lamp types

•

Five year full warranty on all parts - Die cast aluminium hosing and hinged op frame

•

½” coin pugs with ‘O’ rings for conduit and photocell

•

Two stainless steel latches provide tool-less entry for easy bulb replacements.

•

CSA/CSAUS approved for wet locations

•

6500k light temperature which gives cows a more natural light.

11

Moon-Lighter: • Upgrade any of the VES

Induction Day-Lighter

lights with our 9 watt LED

Moon-lighter • If long day lighting is in your

strategy than the combination Day-Lighter

and Moon-Lighter are ideal • An unbelievable 9 Watts of power to light your

building with a minimum light level of 2-3 foot

candles. This allows you to safely move about the

building and yet provide the cows with night

conditions • Using the lights in conjunction with the VES

manual/automatic back-up relay control, allows

you with the flick of a switch, turn on the lights in

an emergency • Based on i.e 500’ x 120’ building, the Moon-Lighter

would use less than 600 Watts of power to provide Long Lifespan

the night light needed Experience with using induction light at the U.S. Department of Energy’s Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, has demonstrated the long life in actual usage.

WHAT IS INDUCTION LIGHTING? Induction lighting is a closed glass tube technology or WIPP’s first induction lighting system was installed in 1998, florescent lighting without filaments or electrodes. It uses replacing high-pressure sodium (HPS) lights. More than 10 a magnetic field to excite the electrons in the bulb as years later, all but three of the original 36 induction units are the electrons accelerate inside the bulb, they collide with still operating after more than 88,000 hours of continuous, mercury atoms and produce ultraviolet (UV) light radiation. 24/7 operation. Additional systems were installed in 2002 The UV light then causes the special phosphor coating and succeeding years, both indoors and outside, with inside the glass to react in a way that produces fluorescent excellent results. light within the visible spectrum.

Environmental benefits of the Day-Lighter: • Based on 100,000 hours of life you may have to

replace one bulb and/ or one ballast. The bulb is

recyclable except for the dime size reservoir of

mercury. The die cast aluminium housing is

recyclable, the lens is recyclable and much of the

ballast can be recycled. This probably makes the

Enviralight one of the most environmentally

friendly lights available today •

12

If we compare our 250 Watts induction at 100,000 to the 6 bulb and 2 ball ast florescent T bulbs with 20,000 hours of light you would have to change and throw into the landfill site 30 bulbs and 10 ballast

Light 150W Induction Lamp 120-277, No Cord

56619

Light 250W Induction Lamp 120-277, No Cord

56618

Bracket, Aluminium Hanging Kit for Lights

56620

ENVIRALIGHT LED FIXTURES - VAPORTITE LED SERIES ENVIRALIGHT Vaportite LED Series is the next generation to replace old-fashioned florescent lighting! The Vaportite fixture has the ability to maintain a watertight seal results in minimal changeouts and makes these bulbs ideal for power washing areas and is UL listed for wet locations. Additionally, with only 18 watts of power (compared to 40 watts for the standard florescent bulbs) generating a minimum 1650 lumens (multiplied by 2 for the 4’, 2-bulb fixture) of light output, their low power consumption is simply phenomenal!

FEATURES • One-piece fiberglass reinforced composit housing is impact resistant, prevents rust and corrosion.

• High quality diffusers are constructed to resist breakage and are lineal ribbed to reduce glare.

• Fixture available with either plastic cam or stainless steel clips to provide a tight compress lens against gasketing, forming a continuous seal, while also allowing for ease of periodic maintenance.

• Fixture can be completely washed down and includes UL wet location label.

• Mounts to structure with pre-punched holes for secure mounting.

PRODUCT SPECIFICATIONS • • • • • •

Fixture holds two 4’ LED linear Tubes (sold seperately) Voltage: 120vac~277vac CCT: 5000K Rated Lamp Life: 50,000 Hours Warranty: 5 Years 6.80”W x 51.70”L x 2.13”D

www.wynnstay.co.uk

13

VENTILATION Proper ventilation has shown to help: • Increase average milk yield • Increase margins • Increase lying times • Reduce cases of mastitis • Reduce bedding moisture content • Improved cow comfort

Increase average milk yield and cow 14

WYNNSTAY are UK Distributor of VES FANS & ENVIRALIGHTING

‘VES...world leader in environmental designs, ventilation control, animal comfort and energy savings’ Milk production and lying times

Please call for more details and expert advice on building and design layout.

comfort www.wynnstay.co.uk

15

For more information please contact...

Dr Huw McConochie Head of Dairy Technical Services

m: 07771 740857 huw.mcconochie@wynnstay.co.uk @HuwMcConochie

or tel:

Alternatively contact your local Wynnstay Store or call your local Wynnstay Representative.

Follow us on twitter @WynnstayGroup Whilst every effort is made to ensure that the details supplied are correct, Wynnstay cannot be held responsible for any misleading or inaccurate information. E & OE. Wynnstay (Agricultural Supplies) Ltd • Eagle House • Llansantffraid • Powys SY22 6AQ Part of Wynnstay Group Plc, Eagle House, Llansantffraid, Powys, SY22 6AQ Telephone: 01691 828512 • Fax: 01691 828690 • Email: info@wynnstay.co.uk • www.wynnstay.co.uk

16

Registered in England and Wales

Registration No: 5009019 Registration No. 2704051 Vat Reg No. 168 7221 87

© Wynnstay (Agricultural Supplies) Ltd 2015