MOUNTING & CONNECTOR EQUIPMENT Part 2

MOUNTING & CONNECTOR EQUIPMENT Part 2

C-Mounting Rails & Brackets

Stainless Steel A4 C-Mounting Hot-dip galvanized System & Accessories C-Mounting Rails & Accessories

Mounting & Connector Components

Pipe Clamps

Cable Mounting System

Mounting & Connector Components Varifix® Standardfix/Channel Nut............................................................................................ 1 – 3 Varifix® Rapidfix................................................................................................................................ 4 Varifix® Systemfix........................................................................................................................ 5 – 8 Varifix® Wing Nut............................................................................................................................. 9 Varifix® Power Button and Accessories.................................................................................10 – 21 Varifix® Base Plate...........................................................................................................................22 Varifix® Trapezoidal Hook.............................................................................................................. 23 Varifix® Damping Profile....................................................................................................... 24 – 25 Rubber/Metal Buffer..............................................................................................................26 – 29 Varifix® Bracket Set................................................................................................................30 – 31 Universal Cube/Reducing Nipple.................................................................................................. 32 Mounting Strip/Manual Drive-in Stud ................................................................................. 33 – 35 Mounting Eyelet/Pipe Fastening Eyes...................................................................................36 – 37 Double Backet/Threaded Pin............................................................................................... 38 – 39 Fishplate Bolt/Pan Head Screw.....................................................................................................40 Stud Screw..............................................................................................................................41 – 42 Spacer Sleeve..................................................................................................................................43 Varifix® Multiprofile................................................................................................................ 44 – 45 Varifix® Application Pictures...........................................................................................................46

VARIFIX® CHANNEL NUT - C2C

Surface

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Galvanised

Material

Steel

Art. No.

0862 062 46

0862 062 48

0862 062 410

0862 063 36

0862 063 38

0862 063 310

0862 063 312

Suitable for mounting rail

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

13 mm

18 mm

18 mm

18 mm

18 mm

P. Qty.

Width (B)

Length (L)

Thread type x nominal diameter (G) Thickness (t)

Product weight (per item)

100

13 mm 22 mm

STEP - 2017-12-08 - 22324 - ©

13 mm 22 mm

100

22 mm

100

30 mm

100

30 mm

100

30 mm

100

30 mm

M6

M8

M10

M6

M8

M10

M12

4 mm

4 mm

4 mm

4 mm

6 mm

6 mm

6 mm

7.849 g

Application area Recommended for direct fastening of pipe clamps or for fastening between mounting rail and connecting component.

3

100

7.235 g

6.3 g

15.800 g

22.950 g

21.399 g

20.6 g

VARIFIX® CHANNEL NUT - C2C

Also suitable for mounting rails with toothing Type of fastening • Slip-resistant or shear/projecting joints with hexagon bolt, threaded piece or rod (4.6), washer and nut • Form-fitting, slip-resistant or shear/projecting joint connection

Width (B)

20 mm

Thickness (t)

6 mm

Length (L) Surface

Material

35 mm Galvanised Steel

Art. No.

0862 064 008

0862 064 010

0862 064 012

Suitable for mounting rail

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

100

Thread type x nominal diameter (G) M8 Product weight (per item)

29 g

STEP - 2018-03-07 - 20306 - ©

Application area Recommended for direct fastening of pipe clamps or for fastening between mounting rail and connecting component

4

100

M10 27 g

100

M12 27 g

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® HAMMER HEAD FASTENER STANDARDFIX - C2C

Surface

Zinc plated

Thread type

Metric thread

Material

Washer Washer thickdiameter Suitable for mounting rail ness (d2) (h1)

Weight

Art. No.

P. Qty.

22 mm

13 mm 4 mm

25 mm

8 mm

25 mm

1,5 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

23 g

0862 100 001 100

22 mm

13 mm 4 mm

40 mm

8 mm

25 mm

1,5 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

28 g

0862 100 003 100

22 mm 22 mm 22 mm 22 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm

STEP - 2018-03-07 - 20304 - ©

Threaded bolt strength class 4.6

Application area Recommended for direct fastening of pipe clamps

Steel

Length Thick- (hammer Nominal Length Width ness head and diameter (L) (B) (t) stud bolt) (G) (LG)

Preassembled with nut and washer, galvanised

13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm

30 mm 50 mm 60 mm 80 mm 30 mm 40 mm 60 mm 80 mm 40 mm 60 mm 80 mm

8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm

10 mm 10 mm 10 mm

25 mm 25 mm 25 mm 25 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm

1,5 mm 1,5 mm 1,5 mm 1,5 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm

35 mm

20 mm 6 mm

40 mm

8 mm

40 mm

3 mm

35 mm

20 mm 6 mm

60 mm

8 mm

40 mm

3 mm

35 mm

20 mm 6 mm

80 mm

8 mm

40 mm

3 mm

35 mm

20 mm 6 mm

100 mm

8 mm

40 mm

3 mm

35 mm

20 mm 6 mm

40 mm

10 mm

40 mm

3 mm

35 mm

20 mm 6 mm

60 mm

10 mm

40 mm

3 mm

35 mm

20 mm 6 mm

80 mm

10 mm

40 mm

3 mm

35 mm

20 mm 6 mm

100 mm

10 mm

40 mm

3 mm

35 mm

20 mm 6 mm

30 mm

12 mm

40 mm

3,5 mm

35 mm

20 mm 6 mm

40 mm

12 mm

40 mm

3,5 mm

35 mm

20 mm 6 mm

60 mm

12 mm

40 mm

3,5 mm

35 mm

20 mm 6 mm

80 mm

12 mm

40 mm

3,5 mm

5

26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm

26 g 31 g 35 g 40 g 46 g 53 g 59 g 65 g 66 g 73 g 83 g

0862 100 002 100 0862 100 004 100 0862 100 005 100 0862 100 006 100 0862 100 010 100 0862 100 011 100 0862 100 012 100 0862 100 013 100 0862 100 020 100 0862 100 021 100 0862 100 022 100

72 g

0862 100 030 100

78 g

0862 100 031 50

82 g

0862 100 032 50

88 g

0862 100 033 50

81 g

0862 100 040 100

92 g

0862 100 041 50

101 g

0862 100 042 50

112 g

0862 100 043 50

90 g

0862 100 050 25

94 g

0862 100 051 25

108 g

0862 100 052 25

125 g

0862 100 053 25

VARIFIX® HAMMER HEAD SCREW RAPIDFIX

Pre-assembled with nut, washers and spacer element System is ready for assembly Saves time during assembly in comparison with conventional systems Single-handed assembly of the hammer-head bolts Easier assembly, particularly when working on ladders Immediately grips in the C-rails Slides easily into the rail, both horizontally and vertically

Material

Steel

Surface

Galvanised

Thread type MateWasher Washer Thread x nominal Length Width rial diamlength thickness Suitable for mounting rail diameter (L) (B) thicketer (d2) (h1) (LG) (G) ness (t1)

Weight Art. No.

22 mm

22 mm

13 mm 4 mm

25 mm

M8

25 mm

1.5 mm

22 mm

13 mm 4 mm

40 mm

M8

25 mm

1.5 mm

22 mm 22 mm 22 mm 22 mm 22 mm 30 mm 30 mm 30 mm 30 mm 30 mm 35 mm 35 mm 35 mm 35 mm

STEP - 2018-07-07 - 20307 - ©

Spacer element made of synthetic rubber Highly wear and ageing-resistant

13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 13 mm 4 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 18 mm 6 mm 20 mm 6 mm 20 mm 6 mm 20 mm 6 mm 20 mm 6 mm

30 mm 50 mm 60 mm 80 mm

M8 M8 M8 M8

100 mm M8 120 mm M8 30 mm

M8

60 mm

M8

40 mm 80 mm

M8 M8

100 mm M8 40 mm

M10

80 mm

M10

60 mm

M10

100 mm M10

25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm

0862 101 001 100

34 g

0862 101 003 100

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

31 g

1.5 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

38 g

1.5 mm 1.5 mm 1.5 mm 1.5 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm

20 mm 6 mm

40 mm

M8

40 mm

3 mm

35 mm

20 mm 6 mm

60 mm

M8

40 mm

3 mm

35 mm

20 mm 6 mm

80 mm

M8

40 mm

3 mm

35 mm

20 mm 6 mm

100 mm M8

40 mm

3 mm

35 mm

20 mm 6 mm

40 mm

M10

40 mm

3.5 mm

35 mm

20 mm 6 mm

60 mm

M10

40 mm

3.5 mm

35 mm

20 mm 6 mm

80 mm

M10

40 mm

3.5 mm

35 mm

20 mm 6 mm

100 mm M10

40 mm

3.5 mm

6

29 g

1.5 mm

35 mm

Compatible with ORSY® storage system

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 26 x 18 mm, 26 x 26 mm, 28 x 28 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

40 g 47 g 53 g 58 g 53 g 56 g 62 g 64 g 71 g 85 g 96 g

105 g 113 g

0862 101 002 100 0862 101 004 100 0862 101 005 100 0862 101 006 100 0862 101 007 50 0862 101 008 50

0862 101 020 100 0862 101 021 100 0862 101 022 100 0862 101 023 100 0862 101 024 50 0862 101 030 50 0862 101 031 50 0862 101 032 50 0862 101 033 50

96 g

0862 101 040 50

102 g

0862 101 041 50

108 g

0862 101 042 50

115 g

0862 101 043 50

108 g

0862 101 050 50

115 g

0862 101 051 50

125 g

0862 101 052 50

135 g

0862 101 053 50

VARIFIX® QUICK FASTENER SYSTEMFIX - C2C

For assembly connection of all VARIFIX® 26/18; 26/26; 28/28 and 36/36 mounting rails Immediately fixed with a 1/4 rotation Friction-locked connection with the rail Precise fit in the mounting rail - alignment in the rail possible One-handed assembly possible Easier assembly, particularly when working on ladders For all Systemfix models Optimal suspension possible with threaded rods for long lengths

Width (B)

30 mm

Material thickness (t1)

2.5 mm

Min./max. temperature resistance

-40 to 90 °C

Thickness (t2) Material Surface

Material of the connecting component

5 mm Steel

Galvanised

POM - Polyoxymethylene

Length (L) Thread type x nominal diameter (G) Suitable for mounting rail

27 mm

27 mm

27 mm

34 mm

34 mm

34 mm

M6

M8

M10

M6

M8

M10

Can be stored in ORSY system

STEP - 2014-12-02 - 20308 - ©

Application area Recommended for direct fastening of pipe clamps

7

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Weight

24 g

25 g

24 g

32 g

35 g

33 g

Art. No.

0862 102 100

0862 102 101

0862 102 102

0862 102 130

0862 102 131

0862 102 132

P. Qty.

100

100

100

50

50

50

VARIFIX® QUICK FASTENER SYSTEMFIX - C2C

With threaded rod Immediately fixed with a 1/4 rotation Friction-locked connection with the rail Precise fit in the mounting rail - alignment in the rail possible One-handed assembly possible Easier assembly, particularly when working on ladders Optimal suspension possible with threaded rods for long lengths For all Systemfix models

Width (B)

30 mm

Thickness (t2)

5 mm

Material

Steel

Material thickness (t1)

2.5 mm

Min./max. temperature resistance Surface

Material of the connecting component Length (L)

Thread length (LG)

27 mm

40 mm

27 mm

27 mm

27 mm

27 mm

27 mm

27 mm

27 mm

34 mm

34 mm

34 mm

34 mm

34 mm

34 mm

34 mm

34 mm

34 mm

34 mm

30 mm

60 mm

80 mm

100 mm

120 mm

40 mm

60 mm

30 mm

40 mm

60 mm

80 mm

100 mm

120 mm

40 mm

60 mm

80 mm

100 mm

Thread type x nominal diameter (G)

M8

M8

M8

M8

M8

M8

M10

M10

M8

M8

M8

M8

M8

M8

M10

M10

M10

M10

-40 to 90 °C Galvanised

POM - Polyoxymethylene Suitable for mounting rail

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

26 x 18 mm, 26 x 26 mm, 28 x 28 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

STEP - 2014-12-02 - 20309 - ©

Can be stored in ORSY system

Application area For assembly connection of all Varifix 26/18; 26/26; 28/28 and 36/36 mounting rails.

Suitable for quick individual attachment in the C-profile as an individual part and as a preassembled unit Varifix Systemfix available individually for suspension with threaded rod.

8

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Weight

42 g

45 g

51 g

57 g

63 g

67 g

57 g

67 g

51 g

54 g

61 g

66 g

72 g

77 g

66 g

76 g

87 g

96 g

Art. No.

0862 102 110

0862 102 111

0862 102 112

0862 102 113

0862 102 114

0862 102 115

0862 102 120

0862 102 121

0862 102 140

0862 102 141

0862 102 142

0862 102 143

0862 102 144

0862 102 145

0862 102 150

0862 102 151

0862 102 152

0862 102 153

P. Qty.

50

50

50

50

40

30

50

50

50

50

40

30

25

20

50

40

30

25

VARIFIX® QUICK FASTENER SYSTEMFIX 41 - C2C

For assembly connection of all Varifix® mounting rails in the 41 range. The Systemfix 41 is available in M6 (not pre-installed), M8, M10 and M12 sizes.

Immediately fixed with a 1/4 rotation Friction-locked connection with the rail Precise fit in the mounting rail - alignment in the rail possible One-handed assembly possible Easier assembly, particularly when working on ladders

Length (L)

38 mm

Material thickness (t1)

3 mm

Width (B)

38 mm

Suitable for mounting rail Min./max. temperature resistance Material Surface

Material of the connecting component Art. No.

For all Systemfix 41 models Suspension possible with threaded rods for long lengths

0862 104 000

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm -40 to 90 °C Steel

Galvanised

POM - Polyoxymethylene 0862 104 001

0862 104 002

0862 104 003

P. Qty.

25

25

25

25

Thread type x nominal diameter (G)

M6

M8

M10

M12

53 g

55 g

61 g

64 g

Thickness (t2) Weight

6 mm

STEP - 2018-03-07 - 20310 - ©

Compatible with ORSY storage system

9

6 mm

8 mm

9 mm

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area Recommended for direct fastening of pipe clamps.

VARIFIX® QUICK FASTENER SYSTEMFIX 41 - C2C

With threaded rod Immediately fixed with a 1/4 rotation Friction-locked connection with the rail Precise fit in the mounting rail - alignment in the rail possible One-handed assembly possible Easier assembly, particularly when working on ladders Optimal suspension possible with threaded rods for long lengths For all Systemfix 41 models

Length (L)

40 mm

Material thickness (t1)

3 mm

Material

Steel

Width (B)

38 mm

Min./max. temperature resistance Surface

-40 to 90 °C

STEP - 2018-03-07 - 21170 - ©

Material of the connecting component Thread length (LG)

Thickness (t2)

40 mm

6 mm

60 mm

6 mm

80 mm

6 mm

100 mm

6 mm

40 mm

8 mm

60 mm

8 mm

80 mm

8 mm

100 mm

8 mm

40 mm

8 mm

60 mm

8 mm

80 mm

8 mm

100 mm

8 mm

Can be stored in ORSY system

10

Galvanised

POM - Polyoxymethylene

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area For assembly connection of all Varifix® mounting rails in the 41 range.

Recommended for direct fastening of pipe clamps.

Thread type x nominal Suitable for mounting rail diameter (G) 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M8 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M8 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M8 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M8 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M10 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M10 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M10 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M10 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M12 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M12 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, M12 41 x 44 mm, 41 x 82 mm, 41 x 86 mm, 41 x 128 mm 41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, M12 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

Weight

Art. No.

P. Qty.

79 g

0862 104 110

25

85 g

0862 104 111

25

92 g

0862 104 112

20

97 g

0862 104 113

20

101 g

0862 104 120

25

111 g

0862 104 121

25

121 g

0862 104 122

20

132 g

0862 104 123

20

119 g

0862 104 130

25

134 g

0862 104 131

25

147 g

0862 104 132

20

163 g

0862 104 133

20

VARIFIX® WING NUT, PROFILE 41 - C2C

For assembly connection of all VARIFIX® C-assembly rails in the 40 and 41 ranges.

• Quick installation in contrast to channel nut/combination sliding nut • The Varifix wing nut does not need to be held in place Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Width (B)

36 mm

Suitable for mounting rail Material

41 x 124 mm, 41 x 22 mm, 41 x 41 mm, 41 x 44 mm, 41 x 62 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm Steel

Surface

Material of the connecting component Art. No.

Galvanised

PP - Polypropylene 0862 104 010

0862 104 011

0862 104 012

P. Qty.

50

50

50

Thread type x nominal diameter (G)

M8

M10

M12

Thickness (t2) Weight

6 mm

26 g

8 mm

33 g

Quarter turn

Fastened wing nut

Fasten the connection bracket

Fasten to frame bracket

Position and fasten frame bracket

STEP - 2018-03-07 - 20312 - ©

Insert wing nut

11

9 mm

35 g

Position the connection bracket

Application area For attaching connection components such as triangular brackets, frame brackets, 90° connection brackets, 45° connection brackets, L-shape flat connectors, T-shape flat connectors and bracket connectors

VARIFIX® QUICK FASTENER POWER BUTTON 41 - C2C

Can be used on all 41-range profiles. All constructions possible using relevant accessory range • Fast and time-saving thanks to 90° rotation mount • Positive and friction connection between the mounting rail and accessories • Can be mounted easily by one person as no need to hold in place

Art. No.

0862 104 050

Length (L)

34.5 mm

P. Qty.

Height (H)

Thickness (t1)

Material thickness (t2) Width 1 (B1) Width 2 (B2)

Width across flats Suitable for mounting rail Weight

Surface

Tightening torque

20

40 mm 4 mm

7 mm

18 mm 25 mm 17 mm

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm 90 g

Galvanised 40 Nm

Permissible tensile force when pulled straight 5000 N Permissible transverse tensile force Thread type x nominal diameter

3000 N M10

Can be stored in ORSY system

STEP - 2019-07-01 - 17333 - ©

Application area For all profile 41 internal area rails

12

Instructions See separate installation instructions

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® FRAME BRACKET FOR POWER BUTTON SYSTEM 41 - C2C

Can be used with all 41-range VARIFIX® rails and the VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 020

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

Limb length (L)

Width of side (B) Thickness (t)

Diameter of hole (RL)

Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA) Material Surface

Product weight (per item)

STEP - 2018-03-07 - 21560 - ©

Application area • Corner connections • Bracket structures • Free structures

13

10

150 mm 40 mm 6 mm

13 mm 36 mm 20 mm

48.5 mm

Structural steel, 1.0037 previously S235 JR Galvanised 891 g

VARIFIX® CONNECTION BRACKET FOR POWER BUTTON SYSTEM - C2C

Art. No.

0862 004 060

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

Limb length (L1)

Limb length 2 (L2) Width of side (B) Thickness (t)

Round hole diameter (RL)

20

65 mm

65 mm

With 2 round holes. Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures • Free structures

40 mm 6 mm

24 mm

Elongated hole length (LL1) 36 mm Elongated hole width (LB1) 20 mm

Surface

Galvanised

Weight

150 g

Material

Structural steel, 1.0037 previously S235 JR

VARIFIX® CONNECTION BRACKET FOR POWER BUTTON SYSTEM - C2C

Art. No.

0862 004 062

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

Limb length (L1)

Limb length 2 (L2) Width of side (B)

STEP - 2019-07-01 - 17334 - ©

Thickness (t)

20

120 mm

120 mm 40 mm 6 mm

Elongated hole length (LL1) 36 mm Elongated hole width (LB1) 20 mm

Hole distance (LA)

51 mm

Material

Structural steel, 1.0037 previously S235 JR

Surface Weight

14

Galvanised 290 g

With 4 round holes. Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures

VARIFIX® CONNECTION BRACKET FOR POWER BUTTON SYSTEM - C2C

Art. No.

0862 004 061

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

20

Limb length (L1)

70 mm

Width of side (B)

40 mm

Limb length 2 (L2) Thickness (t)

Elongated hole length (LL1) Elongated hole width (LB1) Hole distance (LA) Surface

Material Weight

36 mm

20 mm

48.5 mm

Galvanised

Structural steel, 1.0037 previously S235 JR 230 g

0862 004 072

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 86 mm, 41 x 128 mm

STEP - 2019-07-01 - 17343 - © Following page

20

Limb length (L1)

120 mm

Thickness (t)

6 mm

Round hole diameter (RL)

Elongated hole length (LL1) Elongated hole width (LB1) Hole distance (LA) Surface

Material Weight

15

Application area • Corner connections • Bracket structures and free structures

6 mm

Art. No.

Width of side (B)

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

120 mm

VARIFIX® CONNECTION BRACKET FOR POWER BUTTON SYSTEM - C2C

P. Qty.

With 3 round holes. Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button

40 mm 24 mm

36 mm

20 mm

48.5 mm

Galvanised

Structural steel, 1.0037 previously S235 JR 300 g

With 4 round holes. Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures

VARIFIX® RAIL CONNECTOR, FLAT - C2C

For attaching C-assembly rails in conjunction with Powerknopf Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 080

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 86 mm, 41 x 128 mm

P. Qty.

Length (L1) Width (B1)

Thickness (t1)

25

210 mm

40 mm

6 mm

Elongated hole length (LL) 36 mm Elongated hole width (LB) 20 mm Hole distance (LA1)

50 mm

Material

Steel

Weight

Surface

245 g

Galvanised

Related products

VARIFIX® quick fastener Power button 41 - C2C

STEP - 2019-07-01 - 20406 - ©

Application area For connecting 2 profiles.

16

Art. No.

0862 104 050

VARIFIX® RAIL CONNECTOR, HEAVY-DUTY DESIGN - C2C

Art. No.

0862 004 081

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

1

Length (L1)

210 mm

Profile height (HP)

35 mm

Width (B1)

Profile width (BP)

Thickness (t1)

Elongated hole length (LL) Elongated hole width (LB)

54 mm

42 mm

6 mm

36 mm 20 mm

Hole distance (LA1)

50 mm

Material

Steel

Weight

Surface

Galvanised

Related products ® quick

VARIFIX

fastener Power button 41 - C2C

STEP - 2018-03-07 - 21175 - ©

Application area For connecting 2 profiles.

17

995 g

Art. No.

0862 104 050

For attaching C-assembly rails in conjunction with Powerknopf Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® PROFILE FOOT, CROSSWISE, FOR POWER BUTTON - C2C

For attaching C-assembly rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 011

Suitable for mounting rail

41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 44 mm

P. Qty.

Holder plate length (L) Holder plate width (B)

Holder plate thickness (t) Profile length (Lp)

Profile internal width (Bp) Profile height (Hp)

Profile thickness (tp)

10

135 mm 65 mm 6 mm

120 mm

41.5 mm 35 mm

6 mm

Elongated hole length (LL1)

25 mm

Elongated hole width (LB1)

13.5 mm

Elongated hole length 2 (LL2) Elongated hole width 2 (LB2)

36 mm

20 mm

Hole distance (LA1)

100 mm

Hole distance 3 (LA3)

54 mm

Hole distance 2 (LA2) Surface Weight

Material

52 mm

Galvanised 780 g Steel

Related products

VARIFIX® quick fastener Power button 41 - C2C

STEP - 2019-07-01 - 20405 - © Following page

Application area For attaching C-assembly rails to the floor, wall or ceiling or in ducts. Corner connections, bracket structures and free structures.

18

Art. No.

0862 104 050

VARIFIX® PROFILE FOOT FOR POWER BUTTON SYSTEM 41 - C2C

Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 010

Suitable for mounting rail

41 x 44 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm

P. Qty.

Holder plate length (L) Holder plate width (B)

Holder plate thickness (t) Profile length (Lp)

Profile internal width (Bp) Profile height (Hp)

Profile thickness (tp)

10

135 mm 65 mm 6 mm

120 mm

41.5 mm 41 mm

4 mm

Elongated hole length (LL1)

25 mm

Elongated hole width (LB1)

13.5 mm

Elongated hole length 2 (LL2) Elongated hole width 2 (LB2)

36 mm

20 mm

Hole distance (LA1)

100 mm

Hole distance 3 (LA3)

54 mm

Hole distance 2 (LA2) Surface Weight

Material

37 mm

Galvanised 780 g

Structural steel, 1.0037 previously S235 JR

STEP - 2019-07-01 - 17335 - © Following page

Application area • Corner connections • Bracket structures and free structures

19

VARIFIX® BRACKET CONNECTOR FOR POWER BUTTON SYSTEM 41 - C2C

Can be used with all 41-range VARIFIX® rails in conjunction with VARIFIX® power button Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 040

Suitable for mounting rail

41 x 41 mm

P. Qty.

Length (L) Width (B)

Height (H)

Thickness (t)

10

160 mm 50 mm 41 mm 6 mm

Profile internal width (BP)

40 mm

Elongated hole width (LB1)

20 mm

Product weight (per item)

430 g

Elongated hole length (LL1) Hole distance (LA) Surface

Material

STEP - 2018-03-07 - 21184 - ©

Application area For cross-joints of C-mounting rails

20

36 mm

108 mm Galvanised

Structural steel, 1.0037 previously S235 JR

VARIFIX® ANGLE CONNECTOR, 90° WITH 4 SLOTTED HOLES, C2C

For attaching C-assembly rails in conjunction with Powerknopf Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Art. No.

0862 004 050

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

5

Length (L)

55 mm

Thickness (t)

6 mm

Limb length (LS)

47 mm

Elongated hole length (LL) 36 mm Elongated hole width (LB) 20 mm Weight

325 g

Material

Steel

Surface

Galvanised

Related products VARIFIX® quick

fastener Power button 41 - C2C

STEP - 2019-07-01 - 20407 - ©

Application area Corner connections, frame structures, bracket structures and free structures.

21

Art. No.

0862 104 050

VARIFIX® ANGLE CONNECTOR, 90° WITH 8 SLOTTED HOLES, C2C

Art. No.

0862 004 051

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

Length (L)

Thickness (t)

Limb length (LS)

Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA) Weight

Surface

Material Related products

VARIFIX® quick fastener Power button 41 - C2C

STEP - 2018-03-07 - 20410 - ©

Application area Corner connections, frame structures, bracket structures and free structures.

22

5

117 mm 6 mm

47 mm 36 mm 20 mm

62.5 mm 662 g

Galvanised Steel

Art. No.

0862 104 050

For attaching C-assembly rails in conjunction with Powerknopf Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® RAIL CONNECTOR - C2C

Art. No.

0862 004 100

Suitable for mounting rail

41 x 82 mm, 41 x 44 mm, 41 x 124 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 41 x 128 mm, 41 x 86 mm

P. Qty.

4

Length (L1)

106 mm

Width (B1)

49 mm

Thickness (t1)

6 mm

Length 2 (L2) Width 2 (B2)

Elongated hole length (LL) Elongated hole width (LB)

36 mm 20 mm

Material

Structural steel, 1.0037 previously S235 JR

0.76 kg

Galvanised

VARIFIX® RAIL CONNECTOR - C2C

Art. No. P. Qty.

Suitable for mounting rail

4

41 x 44 mm, 41 x 62 mm, 41 x 41 mm, 41 x 22 mm

120 mm

Length 3 (L3)

70 mm

Profile width (BP) Thickness (t1)

Elongated hole length (LL) STEP - 2019-07-01 - 17336 - ©

0862 004 110

Length (L1)

Length 2 (L2)

Elongated hole width (LB)

182 mm 42 mm

6 mm

36 mm 20 mm

Hole distance (LA1)

54 mm

Weight

0.88 kg

Hole distance 2 (LA2) Material Surface

23

Application area • For cross-joints of C-mounting rails • Frame structures and free structures

47 mm

54 mm

Surface

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

62 mm

Hole distance (LA1)

Weight

For Powerknopf

112 mm Structural steel, 1.0037 previously S235 JR Galvanised

For Powerknopf Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • For cross-joints of C-mounting rails • Frame structures and free structures

VARIFIX® BASE PLATE - C2C

• Four-point welding for metric thread, inert gas welding for imperial version • Tensile load centred on the base plate, please consider dowel attachment separately.

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Surface

Galvanised

Material Connection thread (G)

M8

M10

M12

M10

M12

M16

IT Rp 1/2 inch

IT Rp 3/4 inch

1/2 inch

3/4 inch

1 inch

Steel Length (L)

80 mm

80 mm

80 mm

120 mm

120 mm

120 mm

120 mm

120 mm

150 mm

150 mm

150 mm

Width (B)

30 mm

30 mm

30 mm

40 mm

40 mm

40 mm

40 mm

40 mm

80 mm

80 mm

80 mm

Thickness (t)

3 mm

3 mm

3 mm

4 mm

4 mm

4 mm

4 mm

4 mm

6 mm

6 mm

6 mm

STEP - 2018-03-07 - 20313 - ©

Application area For providing hold in the domestic engineering sector for mounting pipes, lift tubes, downpipes and for wall spacing installation. For wall, floor and ceiling attachment in conjunction with pipe clamp TIPP Robust.

24

Elongated hole Elongated hole Hole dislength (LL) width (LB) tance (LA)

18 mm

18 mm

18 mm

18 mm

18 mm

18 mm

18 mm

18 mm

25 mm

25 mm

25 mm

9 mm

9 mm

9 mm

11 mm

11 mm

11 mm

11 mm

11 mm

13 mm

13 mm

13 mm

54 mm

54 mm

54 mm

85 mm

85 mm

85 mm

85 mm

85 mm

100 mm

100 mm

100 mm

Recommended Product weight Art. No. tensile load (per item)

2.5 kN

2.5 kN

2.5 kN

2.5 kN

3 kN

3.5 kN

4 kN

4 kN

7.5 kN

7.5 kN

7.5 kN

52.050 g

60 g

66 g

146 g

151 g

175 g

167 g

178 g

567 g

585 g

609 g

0862 400 100

0862 400 101

0862 400 102

0862 400 105

0862 400 106

0862 400 107

0862 400 111

0862 400 112

0862 400 115

0862 400 116

0862 400 117

P. Qty.

25

25

25

25

25

25

10

10

1

1

1

TRAPEZOIDAL PLATE HOOK - C2C

Quick anchoring to profile plates.

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Permissible load with 1-mm profile plate thickness

Permissible load with 0.75-mm profile plate thickness

0.5 kN 0.3 kN

Art. No.

0862 550 0

0862 551 0

0862 552 0

0862 553 0

Length (L)

60 mm

68 mm

80 mm

95 mm

P. Qty.

100

Hook diameter (ØD)

5.2 mm

Internal diameter of hook (ØDi)

13 mm

Width (B)

Thread type

100

5.2 mm

21.5 mm

Nominal diameter (G)

STEP - 2018-03-07 - 20314 - ©

Drill

25

Done

100

7 mm

Metric thread

Metric thread

40 mm

60 mm

0862 552 0, 0862 553 0

0862 551 0

Fasten

5.2 mm

6 mm

Thread length (metric thread) (LG)

0862 550 0

100

8 mm

Application area For fastening lamps, light bands, cable routes, pipes, signs, decorations and items suspended from the ceiling.

VARIFIX® DAMPING PROFILE - C2C

For noise decoupling on mounting rails, e.g. with ventilation ducts. Also suitable for threaded rods.

Weather and ozone resistance

Length (L)

30 m

Min./max. temperature resistance

-50 to 120 °C

Material Colour

Art. No.

P. Qty.

0862 042 040

1

EPDM (ethylene propylene diene monomer rubber) Black

0862 042 041

1

0862 042 042

1

Width (B)

26 mm

36 mm

41 mm

Insertion depth (HE)

12.5 mm

12 mm

12.5 mm

Insertion width (BE)

17 mm

Basic profile thickness (tp) 5 mm

21 mm 6 mm

26 mm

Instructions The damping profile is inserted into the C profile.

7.5 mm

Suitable for mounting rail

26 x 18 mm, 36 x 36 mm 26 x 26 mm, 28 x 28 mm

Suitable for threaded rods

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 44 mm, 41 x 82 mm, 41 x 128 mm, 41 x 86 mm

M8

M10

M10

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® DAMPING PROFILE - C2C

In sections Weather and ozone resistance Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Length (L)

10 cm

Min./max. temperature resistance

-50 to 120 °C

Material Colour

Art. No. P. Qty.

Width (B)

STEP - 2018-03-07 - 20315 - ©

Insertion width (BE)

0862 042 060 50

26 mm

17 mm

EPDM (ethylene propylene diene monomer rubber) Black

0862 042 061 50

36 mm

21 mm

0862 042 062 50

41 mm

26 mm

Insertion depth (HE)

12.5 mm

Suitable for mounting rail

26 x 18 mm, 36 x 36 mm 26 x 26 mm, 28 x 28 mm

Suitable for threaded rods

41 x 22 mm, 41 x 41 mm, 41 x 62 mm, 41 x 124 mm, 41 x 82 mm, 41 x 44 mm, 41 x 128 mm, 41 x 86 mm

M8

M10

Basic profile thickness (tp) 5 mm

26

12 mm 6 mm

M10

12.5 mm 7.5 mm

Application area For noise decoupling on mounting rails, e.g. with ventilation ducts. This damping profile is also suitable for threaded rods.

Instructions The damping profile is inserted in the C profile.

VARIFIX® NOISE DAMPENING ELEMENT - C2C

With washer For noise- and vibration-damped mounting Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Noise dampening element in long hole

Noise dampening element on retaining clip

Noise dampening element in the C profile Height (H)

17 mm

Product weight (per item)

11 g

Diameter (ØD)

27 mm

Suitable for mounting rail

41 x 62 mm, 41 x 41 mm, 41 x 22 mm, 36 x 36 mm, 28 x 28 mm, 26 x 26 mm, 26 x 18 mm

Art. No.

0862 101

0862 102

Round hole diameter (RL)

8.5 mm

10.5 mm

P. Qty.

Suitable for threaded rods

100 M8

STEP - 2018-03-07 - 20316 - ©

Instructions The damping element is inserted into the mounting profile.

27

100

M10

RUBBER/METAL BUFFER TYPE A - C2C

To prevent transmission of vibrations (e.g. machine vibrations to anchoring) Elasticated support Made of natural rubber, especially suited for supporting light and mediumweight systems without extensive dynamic loading

Min./max. temperature resistance

-40 to 80 °C

Surface

Zinc plated

Type

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

A

Shore A hardness

55

Material

Rubber

Art. No.

0862 800 001 0862 800 002 0862 800 003 0862 800 004

Thread type x nominal diameter (G)

4

4

4

4

M6

M8

M8

M10

Thread length (LG)

16 mm

23 mm

23 mm

28 mm

Outer diameter (ØD)

20 mm

30 mm

40 mm

50 mm

P. Qty.

Height (H)

20 mm

Product weight (per item)

18.25 g

20 mm

30 mm

52 g

96 g

30 mm

150.25 g

Außendurchmesser (D) Nenndurchmesser x Länge Druckbelastung in N Einfederung in mm 20 mm

30 mm

40 mm

STEP - 2018-03-07 - 20317 - ©

50 mm

28

M6 x 16 mm

M8 x 23 mm

M8 x 23 mm

M10 x 28 mm

100

3,2

500

5,8

300 200 400 600

200 600

1000 600

1200 1800

4,6 1,5 2,5 3,2

0,8 2,5 4,0

1,8 2,9 4,5

Application area They are especially suited for supporting light and mediumweight systems without extensive dynamic loading.

• Positioning or support of ventilators, air-conditioning units and pumps • As support feet for compressors, fitness equipment and other frames and machines Notice The majority of rubber/metal elements are intended for pressurised loads. Installation positions where tensile and shear stresses are dominant should be avoided.

Not suitable for petrol, benzene, solvents, oils, greases and acids

RUBBER/METAL BUFFER TYPE B - C2C

To prevent transmission of vibrations (e.g. machine vibrations to anchoring) Elasticated support Made of natural rubber, especially suited for supporting light and mediumweight systems without extensive dynamic loading

Min./max. temperature resistance

-40 to 80 °C

Surface

Zinc plated

Type

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

B

Shore A hardness

55

Material

Rubber

Art. No.

0862 800 010 0862 800 011 0862 800 012 0862 800 013

Thread type x nominal diameter (G)

4

4

4

4

M6

M8

M8

M10

Thread length (LG)

16 mm

23 mm

23 mm

28 mm

Outer diameter (ØD)

20 mm

30 mm

40 mm

50 mm

P. Qty.

Height (H) Depth (T)

20 mm

Product weight (per item)

6 mm

17.25 g

20 mm

30 mm

8 mm

45.75 g

30 mm

8 mm

10 mm

85.5 g

137 g

Außendurchmesser (D) Nenndurchmesser x Länge Druckbelastung in N Einfederung in mm 20 mm

M6 x 16 mm

30 mm

M8 x 23 mm

40 mm

M8 x 23 mm

STEP - 2018-03-07 - 20318 - ©

50 mm

29

M10 x 28 mm

100

0,6

500

3,5

300 500

1000 1500 200 600

1000 600

1200 1800

2,2 1,8 2,2 2,8

1,7 2,0 3,1

2,8 5,8 –

Application area They are especially suited for supporting light and mediumweight systems without extensive dynamic loading.

• Positioning or support of ventilators, air-conditioning units and pumps • As support feet for compressors, fitness equipment and other frames and machines Notice The majority of rubber/metal elements are intended for pressurised loads. Installation positions where tensile and shear stresses are dominant should be avoided.

Not suitable for petrol, benzene, solvents, oils, greases and acids

RUBBER/METAL BUFFER TYPE C - C2C

To prevent transmission of vibrations (e.g. machine vibrations to anchoring) Elasticated support Made of natural rubber, especially suited for supporting light and mediumweight systems without extensive dynamic loading

Min./max. temperature resistance

-40 to 80 °C

Surface

Zinc plated

Type

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

C

Shore A hardness

55

Material

Rubber

Art. No.

0862 800 020 0862 800 021 0862 800 022 0862 800 023

Thread type x nominal diameter (G)

4

4

4

4

M6

M8

M8

M10

Height (H)

20 mm

20 mm

30 mm

30 mm

Depth (T)

6 mm

8 mm

8 mm

10 mm

P. Qty.

Outer diameter (ØD)

20 mm

Product weight (per item)

18 g

30 mm 37 g

40 mm

50 mm

81 g

125.000 g

Außendurchmesser (D) Nenndurchmesser

Druckbelastung in N

Einfederung in mm

20 mm

300

2,3

30 mm

40 mm

STEP - 2018-03-07 - 20319 - ©

50 mm

30

M6

M8

M8

M10

100

500

200

400 600

200

600

1000

600

1200 1800

1,9 2,7 0,8 1,2 1,3 1,0 2,0 3,0 0,5 0,9 1,3

Application area They are especially suited for supporting light and mediumweight systems without extensive dynamic loading.

• Positioning or support of ventilators, air-conditioning units and pumps • As support feet for compressors, fitness equipment and other frames and machines Notice The majority of rubber/metal elements are intended for pressurised loads. Installation positions where tensile and shear stresses are dominant should be avoided.

Not suitable for petrol, benzene, solvents, oils, greases and acids

RUBBER/METAL BUFFER TYPE D - C2C

To prevent transmission of vibrations (e.g. machine vibrations to anchoring) Elasticated support Made of natural rubber, especially suited for supporting light and mediumweight systems without extensive dynamic loading Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Min./max. temperature resistance

-40 to 80 °C

Surface

Zinc plated

Type

D

Shore A hardness

55

Material

Rubber

Art. No.

0862 800 030 0862 800 031 0862 800 032 0862 800 033

P. Qty.

Thread type x nominal diameter (G)

4

4

4

4

M6

M8

M8

M10

Height (H)

20 mm

Thread length (LG)

Outer diameter (ØD)

Product weight (per item)

16 mm

20 mm

13 g

23 mm

20 mm

30 mm

36 g

23 mm

28 mm

30 mm

30 mm

40 mm

50 mm

71 g

106 g

Außendurchmesser (D) Nenndurchmesser x Länge Druckbelastung in N Einfederung in mm 20 mm

30 mm

40 mm

STEP - 2018-03-07 - 20320 - ©

50 mm

31

M6 x 16 mm

M8 x 23 mm

M8 x 23 mm

M10 x 28 mm

100

1,2

500

5,1

300 200 400 600

200 600

1000 600

1200 1800

3,9 1,4 2,3 3,2

1,4 3,4 4,8

2,2 4,3 6,2

Application area They are especially suited for supporting light and mediumweight systems without extensive dynamic loading.

• Positioning or support of ventilators, air-conditioning units and pumps • As support feet for compressors, fitness equipment and other frames and machines Notice The majority of rubber/metal elements are intended for pressurised loads. Installation positions where tensile and shear stresses are dominant should be avoided.

Not suitable for petrol, benzene, solvents, oils, greases and acids

VARIFIX® BRACKET SET

For vibration-free mounting.

Quick, time-saving mounting of refrigerators and air conditioning units.

Time-saving mounting Simple snapping together/engaging of parts Easy alignment Integrated spirit level Vertical struts can be adjusted to various positions along the horizontal strut

Illustration only Art. No.

P. Qty.

Support-arm length

Max. loading weight

Surface

Material

Horizontal-section length

Vertical-section length

Product weight (per item)

0862 423 045

1

420 mm

80 kg

Epoxy coating

Steel

780 mm

400 mm

2.52 kg

0862 423 046

1

465 mm

140 kg

Epoxy coating

Steel

780 mm

400 mm

3.58 kg

2 mm 2 mm Material thickness Scope of delivery: Mounting kit with 4 x ZEBRA® Shark anchors, 4 x fish bolts, 4 x UV-resistant rubber buffer incl. serrated locking nuts

STEP - 2016-03-29 - 20859 - ©

Application area For refrigerators/air-conditioning units and ventilation units

32

0862 423 047

1

560 mm

140 kg

Epoxy coating

Steel

1000 mm

400 mm

4240 g

2 mm

VARIFIX® CONSOLE SET, HEAVY-DUTY DESIGN C2C

For refrigerators/air conditioning units

Easy height adjustments Pre-mounted hammer head bolts Flexible adjustment of attachment with channel nuts Rapid wall mounting Cut-to-length mounting rail 41/41/1.8 including end caps Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Illustration only Max. loading weight

160 kg

Vertical-section length

520 mm

Surface

Zinc plated

Support-arm length Material

With rubbermetal cushion

480 mm

No

560 mm

640 mm

480 mm

560 mm

640 mm

Steel

Steel

Steel

No

No

Steel / rubber Yes

Steel / rubber Yes

Steel / rubber Yes

STEP - 2016-01-21 - 20747 - ©

Application area For the attachment of ventilation and air conditioning units, generators and pumps to the wall.

33

Product weight (per item)

4700 g

5835 g

5780 g

5560 g

6106 g

6366 g

Art. No.

P. Qty.

0862 423 448

1

0862 423 456

0862 423 464

0862 423 548

0862 423 556

0862 423 564

1

1

1

1

1

UNIVERSAL CUBE - C2C

For attaching pipes when installing ceilings and riser pipes Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Length (L)

30 mm

Material

Steel

Width (B)

Instructions • If there are more than three pipes, use threaded fitting with drive-in anchor instead of stud screw with nylon anchor.

• For rail mounting, screw hammer head bolt onto the cube and hang in the rail.

17 mm

Surface

Galvanised

Art. No.

0543 98

0543 910

Height (H)

19 mm

20 mm

P. Qty.

10

Connection thread (G1)

10

M8

Outlet thread (G2)

M10

M8

Product weight (per item)

M10

59 g

46 g

Compatible with ORSY storage system

REDUCING NIPPLE - C2C

Surface

Application area Connecting piece between mounting parts with different thread diameters, e.g. M10 threaded rod and M8 pipe clamp.

Galvanised

Material

STEP - 2018-03-07 - 17349 - ©

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Steel

Art. No.

0862 098 6

0862 091 09

0862 091 08

0862 091 210

Length (L)

19 mm

21 mm

23 mm

25 mm

P. Qty.

Connection thread (IG) Outlet thread (AG)

Male thread length (LG)

Width across flats (SW)

100

IT M8

ET M6

7 mm

13 mm

Compatible with ORSY storage system

34

100

IT M8

ET M10

8 mm

13 mm

100

IT M10 ET M8

8 mm

13 mm

100

IT M12

ET M10

10 mm 17 mm

PUNCHED MOUNTING STRIP, NO MARGINAL PERFORATIONS Art. No.

0972 010 012

0972 010 017

0972 010 025

Width

12 mm

17 mm

25 mm

P. Qty.

Material thickness Diameter of hole Hole distance

Max. load force Material

10

0.7 mm

10

10

0.7 mm

5.2 mm

0.7 mm

6.5 mm

9 mm

8.5 mm

15 mm

1300 N

Hot-galvanised steel sheet, 1.0226

15 mm

1600 N

Hot-galvanised steel sheet, 1.0226

2400 N

Hot-galvanised steel sheet, 1.0226

CRIMPED PUNCHED MOUNTING STRIP WITHOUT PERFORATED EDGE Art. No.

P. Qty.

Width

Material thickness

Diameter of hole

Hole distance

Max. load force

Material

0972 010 112

10

12 mm

0.7 mm

4.8 mm

14 mm

800 N

Hot-galvanised steel sheet, 1.0226

0972 010 117

10

17 mm

0.7 mm

6.8 mm

20 mm

1400 N

Hot-galvanised steel sheet, 1.0226

PUNCHED MOUNTING STRIP WITH MARGINAL PERFORATIONS Art. No.

P. Qty.

Width

Material thickness

Diameter of hole

Hole distance

Marginal-hole diameter

Hole distance of holes on the edges

STEP - 2015-03-23 - 20983 - ©

Max. load force

Material

35

0972 010 217

25

17 mm

0.7 mm

6.8 mm

15 mm

0972 010 225

25

25 mm

0.7 mm

8.5 mm

15 mm

3.2 mm

4.0 mm

15 mm

15 mm

1500 N

2800 N

Hot-galvanised steel sheet, 1.0226

Hot-galvanised steel sheet, 1.0226

In practical plastic roller box Application area • Suspensions (e.g. pipes, ventilation ducts) • For mounting electrical/sanitary pipes, cables and lines on rough concrete Notice Please note that the strip will tear at the breaking load value. Vibrations and thermal loads must be taken into account locally, as must the required safety factor.

In practical plastic roller box Application area • Suspensions (e.g. pipes, ventilation ducts) • For mounting electrical/sanitary pipes, cables and lines on rough concrete Notice Please note that the strip will tear at the breaking load value. Vibrations and thermal loads must be taken into account locally, as must the required safety factor.

Application area • Suspensions (e.g. pipes, ventilation ducts) • For mounting electrical/sanitary pipes, cables and lines on rough concrete Notice Please note that the strip will tear at the breaking load value. Vibrations and thermal loads must be taken into account locally, as must the required safety factor.

PLASTIC-COATED PUNCHED MOUNTING STRIP

Art. No.

P. Qty.

Width

Material thickness

Diameter of hole

Hole distance

Max. temperature resistance

Max. load force Material Halogen-free

Silicone-free

0972 010 314

10

14 mm

2.6 mm

5.2 mm

9 mm

80 °C

1250 N

Hot-galvanised steel sheet, 1.0226

Yes

Yes

Application area • Suspensions (e.g. pipes, ventilation ducts) • For mounting electrical/sanitary pipes, cables and lines on unfinished concrete

0972 010 319

10

19 mm

2.6 mm

6.5 mm

15 mm

80 °C

1500 N

Hot-galvanised steel sheet, 1.0226

Yes

Yes

0972 010 327

10

27 mm

2.6 mm

8.5 mm

15 mm

80 °C

2500 N

Hot-galvanised steel sheet, 1.0226

Yes

Yes

Notice Please note that the strip will tear at the breaking load value. Vibrations and thermal loads must be taken into account locally, as must the required safety factor.

PLASTIC-COATED ASSEMBLY TAPE Art. No.

0972 010 414

Width

14 mm

P. Qty.

Material thickness

Max. temperature resistance Max. load force Material

Halogen-free Silicone-free

STEP - 2015-03-25 - 20988 - ©

Application area • Suspensions (e.g. pipes, ventilation ducts) • For mounting electrical/sanitary pipes, cables and lines on unfinished concrete

36

Welded: Plastic coating will not slip

10

2.6 mm 80 °C

1250 N

Hot-galvanised steel sheet, 1.0226 Yes Yes

Notice Please note that the strip will tear at the breaking load value. Vibrations and thermal loads must be taken into account locally, as must the required safety factor.

For direct mounting (DIVA and DIGA)

Hand KnockIn Pin Max. thickness of mounting material in mm 2 6 10

Max. thickness of mounting material in mm 2 6 10

Length L in mm 14 18 22

Length L in mm 14 18 22

Collar dia.

D in mm

Head dia. d in mm

Head height h in mm

8

4

7.5

Collar dia.

D in mm 10

Head dia. d in mm 4

Head height h in mm 7.5

Art. No.

P. Qty.

0232 4 14 0232 4 18 0232 4 22

100/ 1000

with small collar Application

For mounting strap clips on unfinished flooring in concrete and other solid building materials with impact mounting.

Hand KnockIn Pin

Art. No.

P. Qty.

0232 104 14 0232 104 18 0232 104 22

100/ 1000

with large collar Application

For mounting perforated strips and strap clips on unfinished flooring in concrete and other solid building materials with impact mounting.

Set Pin

with thread M6

MWF - 01/20 - 01532 - ©

Length L in mm 15 18 25

Collar dia.

D in mm

Head dia.

Head height h in mm

8.5

M6

8

Setting Tool for hand knock-in pins Art. No. 0232 4 l With pin holder. l With impact guard.

37

Art. No.

P. Qty.

0232 6 15 0232 6 18 0232 6 25

100/ 1000

Setting Tool for M6 set pins Art. No. 0232 6 l With pin holder. l With impact guard.

Application

For mounting plastic clips with M6 connection thread in concrete and other solid building materials with impact mounting.

Additional products

Strap clips, CU clips, perforated installation strips.

MOUNTING EYELET - C2C

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB For secondary attachments only

Material Art. No.

P. Qty.

Length (L)

Width (B)

Zamak 0862 116 9

100

38 mm

17.5 mm

Diameter of hole 9 mm (RL) Connection M6 thread (G)

0862 118 9

100

38 mm

0862 116 12

100

45 mm

0862 111 012

100

45 mm

17.5 mm

25 mm

25 mm

9 mm

12 mm

12 mm

M8

M6

M10

Application area Suspension of mounting rails, hammer-head screws, mounting eyelets, perforated steel strips.

Suspension of perforated steel strips possible by screwing on the mounting eye when laying pipelines with mounting rail.

Compatible with ORSY storage system

Notice Die-cast zinc should not be heated above 80°C.

PIPE FASTENING EYES - C2C

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB For secondary attachments only

Material

Zamak

Width (B)

22.5 mm

Length (L)

STEP - 2018-03-07 - 20324 - ©

Diameter of hole (RL)

37 mm 12 mm

Connection thread (G)

Art. No.

P. Qty.

M8

0862 118 37

100

M6

M10

0862 116 37

0862 111 037

Can be stored in ORSY system

Notice Die-cast zinc should not be heated above 80°C

38

100

100

Application area • Suspension of perforated steel strips possible by screwing on the mounting eye when laying pipelines with mounting rail • Suspension of mounting rails, hammer-head screws, mounting eyelets, perforated steel strips

EYELET SCREWS

• With wood thread, galvanized.

Dia. in mm L in mm 6 40 8.8 70

b in mm 8.5 11.5

Art. No. 0234 06 40 0234 088 70

P. Qty. 100 100

Dia. in mm a in mm L in mm b in mm Art. No. 6 10 50 6.5 0234 96 50 7 16 50 8.5 0234 98 50

P. Qty. 100 100

Can be stored in ORSY® system

SLOT BOLTS

• With wood thread, galvanized.

Can be stored in ORSY® system

FLAT LEAF BOLTS

• Galvanized.

• VDS-approved No. G 4 790 104 E. • For use in fixed water-based fire-extinguishing systems.

Dia. in mm 6 6 8 8 10 10 12

L in mm C in mm S in mm Art. No. 20 40 20 40 20 40 40

8 8 10 10 12 12 12

0236 6 0236 6 0236 8 0236 8 0236 10 0236 10 0236 12

3.0 3.0 4.0 4.0 5.0 5.0 5.0

P. Qty. 20 40 20 40 20 40 40

50 50 50 50 50 50 50

Can be stored in ORSY® system

SWING HOOKS

• • • •

For safe suspension.

Firmly wound.

Electrogalvanized steel.

Hook diameter: 20 mm.

With metric thread: Thread L Lg M 6 M 8 M 10

100 100 100

48-50 48-50 48-50

MWF - 05/10 - 03721 - ©

Can be stored in ORSY® system

39

Breaking load* N 1500 3000 5000

Art. No.

P. Qty.

0234 74 206 0234 74 208 0234 74 210

25 25 25

* Start of elongation. Observe the safety factor!

DOUBLE BRACKET - C2C

Used for installing supply and return pipes, etc.

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Elongated hole length (LL)

24 mm

Thread type x nominal diameter (G)

M8

Elongated hole width (LB) Width

Thickness (t)

9 mm

15 mm 5 mm

Suitable for screw thread

M8

Surface

Zinc plated

Material

Steel

Art. No.

0862 120 3

0862 120 4

0862 120 5

Hole distance (LA)

65 mm

85 mm

105 mm

P. Qty.

Weight

Min. breaking force

STEP - 2019-04-17 - 20323 - ©

Can be stored in ORSY system

40

50

39 g

1400 N

50

51 g

1200 N

50

64 g

800 N

BOLTS WITH SHAFT - C2C

Nominal diameter (G)

8 mm

Thread type

Metric thread

Surface

Version

Material Art. No.

P. Qty.

Length (L)

Thread type x nominal diameter x length

Weight

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Galvanised With shaft Steel

0862 120 7

100

25 mm

M8 x 25 mm

9g

0862 120 9

100

45 mm

M8 x 45 mm

16 g

0862 120 11

100

65 mm

M8 x 65 mm

24 g

Can be stored in ORSY system

Application area For double bracket and universal cube.

STUD BOLTS COMPANY

Thread type 2

Metric thread

Surface

Galvanised

Material

Art. No. P. Qty.

STEP - 2017-12-08 - 22319 - ©

Nominal diameter (d1)

Steel

0234 16 18 100

6 mm

0234 18 26 100

8 mm

Length (l1)

18 mm

26 mm

Thread length 2 (metric thread) (l3)

8.5 mm

7 mm

Thread length (metric thread) (l2) Weight

Can be stored in ORSY system

41

8.5 mm 4g

17 mm 8g

• As branches from the mounting cube for plumbing pipe clamps • As direct suspension in conjunction with drive-in anchor and plumbing pipe clamp

FISHPLATE BOLT - C2C

DIN 571 galvanised Application area For installing mounting rails, drill-in brackets, multi-function bars etc.

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

DIN

571

Surface

Galvanised

Material

Art. No.

P. Qty.

Steel

0862 001 030

100

0862 001 031

100

0862 001 041

100

0862 001 042

100

Length (L)

60 mm

80 mm

100 mm

60 mm

70 mm

Diameter (ØD)

8 mm

8 mm

8 mm

6 mm

6 mm

Thread length (thread for woodwork) (LG) 36 mm Width across flats (SW)

Internal drive

Product weight (per item)

13 mm

AW30

23 g

48 mm

13 mm

AW30

29 g

Can be stored in ORSY system

PAN HEAD SCREW FOR DRIVE-IN ANCHOR

Art. No.

0862 001 040

Internal drive

AW30

P. Qty.

Thread type x nominal diameter x length Surface

Material

Head height (K) Length (L) STEP - 2018-03-07 - 20325 - ©

0862 001 032

100

100

M8 x 14 mm Galvanised Steel

5 mm

14 mm

Can be stored in ORSY system

Related products AW bit ®

Washer with large outside diameter

42

Art. No.

0614 513 0 0416 8

60 mm

13 mm

AW30

34 g

36 mm

10 mm

AW25

12 g

48 mm

10 mm

AW25

15 g

STUD SCREW

Thread type x nominal diameter x length (d)

Material

M6 x 60 mm

Steel

M6 x 50 mm

Steel

With internal drive (from M8), galvanised steel

Property class 4.8

4.8

Surface Zinc plated

Zinc plated

Thread Width length Thread length Internal drive across flats (thread for (metric thread) (SW) woodwork) 37 mm

M8 x 50 mm

Steel

4.8

Zinc plated

TX25

6 mm

M8 x 80 mm

Steel

4.8

Zinc plated

TX25

6 mm

M8 x 60 mm M8 x 100 mm M8 x 120 mm M8 x 140 mm M8 x 160 mm M8 x 180 mm M8 x 200 mm M8 x 220 mm M10 x 60 mm M10 x 80 mm

M10 x 100 mm M10 x 120 mm M10 x 140 mm M10 x 160 mm M10 x 180 mm M10 x 200 mm M10 x 220 mm M10 x 240 mm M10 x 260 mm M10 x 280 mm M10 x 300 mm M12 x 100 mm

Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel

4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8

Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated Zinc plated

TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX25 TX30

6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm 8 mm

10 mm

11 mm

STEP - 2014-12-02 - 20327 - ©

43

100

20 mm

0232 306 060

100

30 mm

20 mm

0232 308 060

100

30 mm 37 mm 50 mm 62 mm 62 mm 62 mm 62 mm 62 mm 62 mm 37 mm 47 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 57 mm 52 mm

10 mm 30 mm 40 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 20 mm 20 mm 30 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 50 mm 30 mm

Related products for

Designation

Art. No.

0232 306 060

Screwing tool for stud screws

0715 137 06

Screwing tool for stud screws

0232 306 050

P. Qty.

37 mm

Compatible with ORSY storage system

0232 306 050

Art. No.

0715 137 06

0232 308 050 0232 308 080 0232 308 100 0232 308 120 0232 308 140 0232 308 160 0232 308 180 0232 308 200 0232 308 220 0232 310 060 0232 310 080 0232 310 100 0232 310 120 0232 310 140 0232 310 160 0232 310 180 0232 310 200 0232 310 220 0232 310 240 0232 310 260 0232 310 280 0232 310 300 0232 312 100

100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

SCREWING TOOL FOR STUD SCREWS

No screwing in or additional adjustment of screw-in parts into nut required

Insert

Drive the screw

Pull off Suitable for screw

Diameter (Ø)

Length

Art. No.

P. Qty.

M8

25 mm

38 mm

0715 137 08

1 / 10

M6

M10 M12

25 mm 30 mm 30 mm

Application area For screwing and unscrewing stud screws, threaded rods and threaded pieces

STEP - 2014-12-02 - 20326 - ©

Notice Not suitable for impact screwdrivers

44

38 mm 38 mm 38 mm

0715 137 06 0715 137 10 0715 137 12

1 / 10 1 / 10 1 / 10

• The three threaded rollers automatically grip positively into thread when screwing in. When unscrewing, the threaded rollers open automatically and release the thread • Can be used with 1/2“ square drive for a ratchet screwdriver or with an adapter for an electric screwdriver

GALVANIZED STEEL HEXAGONAL SPACER SLEEVE

Material

Thread type x nominal diameter (M)

Length (l)

Wrench size (s)

Steel

M6

20 mm

10 mm

Steel

M6

30 mm

10 mm

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

M6

25 mm

M6

10 mm

50 mm

M8

10 mm

20 mm

M8

11 mm

25 mm

M8

11 mm

30 mm

M10

11 mm

20 mm

M10

13 mm

25 mm

M10

13 mm

30 mm

M10

13 mm

40 mm

M12

13 mm

40 mm

M12

17 mm

50 mm

M16

17 mm

40 mm

M20

24 mm

50 mm

Suitable for ORSY storage

30 mm

Corner dimension (e)

Strength class

Art. No.

P.

11.05 mm

11.05 mm

4

0974 6 20

100

11.05 mm

4

4

0974 6 30

50

11.05 mm

12.16 mm

12.16 mm

12.16 mm

14.38 mm

14.38 mm

14.38 mm

14.38 mm 18.9 mm

18.9 mm

26.75 mm

32.95 mm

0974 6 25

0974 6 50

4

0974 8 20

4

0974 8 25

4

0974 8 30

4

0974 10 20

4

0974 10 25

4

0974 10 30

4

0974 10 40

4

0974 12 40

4

0974 12 50

4

0974 16 40

4

0974 20 50

4

50

500

100

100 50

50

50

50

50

50

50

10

10

STAINLESS-STEEL A2 HEXAGONAL SPACER SLEEVE

Art. No.

0865 520 630

0865 520 830

0865 521 030

0865 521 240

0865 521 650

Material

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

P.

Thread type x nominal diameter (M) Length (l)

Wrench size (s)

Corner dimension (e)

STEP - 9/22/2014 - 17352 - ©

Storable in ORSY

45

100 M6

30 mm 10 mm

11.05 mm

100 M8

30 mm 13 mm

14.38 mm

100

M10

30 mm 17 mm

18.9 mm

50

M12

40 mm 19 mm

21.1 mm

25

M16

50 mm 24 mm

26.75 mm

GALVANIZED STEEL ROUND SPACER SLEEVE

Material Steel

Steel

Steel

Steel

Steel

Steel

Steel

Thread type x Length nominal diameter (l) (M)

Outer diam- Strength eter (d) class

Art. No.

P.

M8

11 mm

M8

20 mm

11 mm

4

0974 08 20

50

M8

30 mm

11 mm

4

0974 08 30

50

M10

M10

M10

M12

25 mm

20 mm

30 mm

40 mm

40 mm

13 mm

13 mm

13 mm

15 mm

0974 08 25

4

50

0974 010 20

4

50

0974 010 30

4

50

0974 010 40

4

50

0974 012 40

4

50

Suitable for ORSY storage

STAINLESS-STEEL A2 ROUND SPACER SLEEVE

Art. No.

0865 500 630

0865 500 830

0865 501 030

0865 501 240

0865 501 650

Material

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

P.

Thread type x nominal diameter (M) Length (l)

Outer diameter (d)

STEP - 9/22/2014 - 17353 - ©

Storable in ORSY

46

100 M6

30 mm 10 mm

100 M8

30 mm 13 mm

100

M10

30 mm 17 mm

50

M12

40 mm 19 mm

25

M16

50 mm 24 mm

VARIFIX® FIXING PLATE

Allows twist-proof and centred installation of wall panels and junction boxes on the rail.

Art. No.

0862 090 015

Width

50 mm

P. Qty.

Thickness Length

50

1.25 mm 70 mm

Application area Installation of wall panels and junction boxes

VARIFIX® MULTIPROFILE

Enables universal application in pre-installation or installation of all profile frameworks by simply riveting or screwing on (Zebra pias®).

• The rail is suitable for all sizes of holes due to being punched with three separate rows of holes • Can be used for all common sanitary bore gauges

Art. No.

0862 090 000

Length

2000 mm

P. Qty.

STEP - 2014-12-02 - 20328 - ©

Surface Width

Thickness

Product weight (per item)

47

10

Zinc plated 50 mm 3 mm

830 g

Notice Cable clamps (art. no. 0520516) are ideally suited for fastening a pipe clamp to a downpipe.

Application area For various pipe systems, valves as well as wall disks.

VARIFIX® ISOLATION CAP

Art. No. P. Qty.

For effective noise damping

0862 090 011 20

VARIFIX® SOUND ISOLATOR

Effective noise damping with a single component Fast and simple handling

Art. No. P. Qty.

0862 090 010 20

Instructions To secure use 4.2 x 16 mm tapping screws art. no. 021442 16 or 4.8 x 16 mm tapping screws art. no. 021448 16.

Fasten the Varifix sound isolator to the Varifix multi profile using 4.8 x 16 tapping screws art. no. 021448 16 or 19 mm tapping screws art. no. 021448 19

BENDING PLIERS

For rapid adaptation to specific construction circumstances

STEP - 2014-12-02 - 20329 - ©

• Easy, free-hand bending • Maximum bending radius of 135° is particularly useful when working on wall brackets Art. No.

0715 43 041

Product weight (per item)

1704 g

P. Qty.

48

1

49

50

MOUNTING & CONNECTOR EQUIPMENT Würth Limited Würth Centre Mdina Road Zebbug, ZBG9016 Malta Tel. +356 2149 4604 eshop.wuerth.com.mt sales@wuerth.com.mt

© by Würth Limited All rights reserved.

Editor: Marketing Department - Würth MT

Our general terms and conditions of sale, delivery and payment apply. They can be found at eshop.wuerth.com.mt Reprint only with prior permission MP033.21 We reserve the right to make any changes we deem necessary to improve the quality of a product, even without prior announcement or notification. Illustrations include sample illustrations and may differ in appearance from the actual goods delivered. Errors excepted.

We do not accept any liability for printing errors.