STAINLESS STEEL A4 C-MOUNTING SYSTEM & ACCESSOIRES

STAINLESS STEEL A4 C-MOUNTING SYSTEM & ACCESSOIRES

C-Mounting Rails & Brackets

Stainless Steel A4 C-Mounting Hot-dip galvanized System & Accessories C-Mounting Rails & Accessories

Mounting & Connector Components

Pipe Clamps

Cable Mounting System

Stainless Steel A4 C-Mounting System & Accessories Varifix® Load Values.................................................................................................................... 1 – 2 Varifix® C-Assembly Rail............................................................................................................. 3 – 7 Varifix® Consoles....................................................................................................................... 8 – 10 Varifix® Profile Feet, Frame- and Connectionbrackets........................................................... 11 – 17 Varifix® Base Plates......................................................................................................................... 18 Varifix® Standardfix und Channel Nuts.................................................................................19 – 20 TIPP® SMART-Lock........................................................................................................................... 21 TIPP® Stainless Steel................................................................................................................22 – 23 Ventilation Duct Clamp...................................................................................................................24 Stud Screws.....................................................................................................................................25 Spacer Sleeve..........................................................................................................................26 – 27

OVERVIEW OF VARIFIX® MOUNTING RAILS 1.4571 - A4 stainless steel

Permissible load and deformation specifications at room temperature (tR)

MWF - 08/18 - 12588 - © •

Name Individual load / total load Deformation (tR) fmax = fperm [mm] 3.8 5.0 6.3 7.5 8.8 10.0 11.3 Selection example: 12.5 Output: 13.8 With L/2 central individual 15.0 load: 16.3 ≈ F = 0.80 kN ( 80 kg) 17.5 Bracing width: L = 1500 mm 18.8 Solution: 1) Select line with L = 1500 mm 20.0 21.3 span.

22.5 2) Match mounting rail column 23.8 to the same or next largest 25.0 load.

The mounting rails 36/36/2.5 26.3 and 41/41/2.5 and 27.5 41/62/3.0 can be used.

28.8 30.0 Three individual loads / total load Deformation (tR) fmax = fperm [mm] 3.8 5.0 6.3 7.5 8.8 10.0 11.3 Selection example: 12.5 13.8 Output: 15.0 At equal spacing of L/4 16.3 3 identical loads: F = 1.00 kN (≈ 100 kg) 17.5 18.8 Bracing width: L = 1750 mm 20.0 Solution: 1) Select line with L = 1750 mm 21.3 22.5 span.

2) Match mounting rail column 23.8 to the same or next largest 25.0 load.

26.3 The mounting rail 41/62/3.0 27.5 can be used.

28.8 30.0

Span L [mm] 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5250 5500 5750 6000 Span L [mm] 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000 5250 5500 5750 6000

Fire protection suitability certificate Permissible load values on request!

Installation situation, load and sag values 1) see MPA test report 2) via static calculation according to EUROCODE 3 on request

3

26/18/1.25 28/28/1.75 36/36/2.5 Load (tR) Load (tR) Load (tR)

41/41/2.5 Load (tR)

41/62/3.0 Load (tR)

F [kN] 0.28 0.16 0.10 0.07 0.05

F [kN] 1.73 1.30 1.04 0.83 0.61 0.47 0.37 0.30 0.25 0.21 0.18 0.15 0.13 0.12 0.10 0.09 0.08 0.07 0.07 0.06 0.06 0.05 Load (tR)

F [kN] 2.34 1.75 1.40 1.17 1.00 0.77 0.61 0.49 0.41 0.34 0.29 0.25 0.22 0.19 0.17 0.15 0.14 0.12 0.11 0.10 0.09 0.09 Load (tR)

F [kN] 4.81 3.61 2.89 2.40 2.06 1.80 1.60 1.44 1.27 1.07 0.91 0.78 0.68 0.60 0.53 0.47 0.42 0.38 0.35 0.32 0.29 0.27 Load (tR)

F [kN] 0.78 0.58 0.47 0.35 0.26 0.20 0.15 0.12 0.10 0.09 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.03 0.02 0.02 0.02

F [kN] 1.23 0.92 0.74 0.58 0.42 0.32 0.26 0.21 0.17 0.14 0.12 0.11 0.09 0.08 0.07 0.06 0.06 0.05 0.05 0.04 0.04 0.03

F [kN] 2.50 1.87 1.50 1.25 1.07 0.93 0.80 0.65 0.53 0.45 0.38 0.33 0.29 0.25 0.22 0.20 0.18 0.16 0.15 0.13 0.12 0.11

F [kN] 0.68 0.51 0.37 0.26 0.19 0.14 0.11 0.09 0.08 0.06 0.05

Load (tR)

Load (tR)

F [kN] 0.12 0.07 0.04 0.03 0.02 0.02

F [kN] 0.32 0.24 0.16 0.11 0.08 0.06 0.05 0.04 0.03 0.03 0.02 0.02 0.02

1 2

) )

Varifix® mounting rail selection The specified data is based on a simple beam with an individual load of F [kN] in the centre of the beam (including its own load) and a simple beam with a distributed load or three identical loads.

Individual load / total load If several different individual loads act on a simple beam (cross-member) and are unevenly spaced, they can be added together and taken as an approximate central individual load.

Assessment of deflection The specified sag is to be evaluated visually in each individual case!

Three Individual loads / total load If more than three approximately the same single loads act at approximately equal intervals on a single-carrier, a weight distribution for 3 equal single keys 1/3 F can be set from the total load F at 4 equal intervals 1/4 L. Coordinate system

Note Depending on the construction conditions, performance values of W-SL connectors and elements must be checked against the performance values of double U sectional beams.

This applies to connections to the structure and/or with another W-SL double U sectional beam.

Technical data (tR) Yield stress Re or Rp0.2 210n/mm2, a safety coefficient total of 1.5, an E-module = 196,000 N/mm2, and a maximum sag of wfperm = L/200 taken into account. tR = 20°C FK = 50

Permissible load and deformation specifications at room temperature (t R) Varifix® mounting rail selection The specified data is based on a simple beam with an individual load of F [kN] in the centre of the beam (including its own load) and a simple beam with a distributed load or three identical loads.

Name Load per unit length / total load Verformung (t R) fmax = f zul [mm] Oberfläche

Selection example:

Output: Load per unit length: q = 1.00 kN/m (≈ 100 kg/m) Bracing width: L = 1500 mm Solution: 1) Select line with L = 1500 mm span.

2) Match mounting rail column to the same or next largest load.

The installation rails 41/41/2.5 to 41/62/3.0 can be used.

Edelstahl 1.4571/1.4401 A4

26/18/1.25

28/28/1.75

36/36/2.5

41/41/2.5

41/62/3.0

Spannweite L [mm]

Belastung (t R) F [kN/m]

Belastung (t R) F [kN/m]

Belastung (t R) F [kN/m]

Belastung (t R) F [kN/m]

Belastung (t R) F [kN/m]

Länge m

Art.-Nr.

Art.-Nr.

Art.-Nr.

Art.-Nr.

Art.-Nr.

2

0865 001 001

0865 001 003

0865 001 004

0865 001 006

3

0865 001 221

0865 001 223 0865 001 230

0865 001 231

0865 001 232

6

3.8

750

0.60

1.81

4.62

6.23

12.82

5.0 6.3 7.5

1.000 1.250 1.500

0.25 0.12 0.07

0.91 0.46 0.26

2.60 1.50 0.86

3.51 2.24 1.44

7.21 4.62 3.21

8.8 10.0 11.3

1.750 2.000 2.250

0.04 0.03 0.02

0.16 0.10 0.07

0.53 0.35 0.24

0.90 0.59 0.41

2.36 1.80 1.31

12.5 13.8 15.0

2.500 2.750 3.000

0.01 0.01

0.05 0.03 0.02

0.17 0.12 0.09

0.29 0.21 0.16

0.94 0.70 0.53

Material information Material Material thickness Delivered length (optional cutting) Weight

Individual load / total load If several different individual loads act on a simple beam (cross-member) and are unevenly spaced, they can be added together and taken as an approximate central individual load.

Assessment of deflection In individual cases, the specified deflection is to be assessed for optical acceptance!

Three individual loads / total load If more than three approximately the same single loads act at approximately equal intervals on a single-carrier, a weight distribution for 3 equal single keys 1/3 F can be set from the total load F at 4 equal intervals 1/4 L. Coordinate system

A4

material no.

1.4571/1.4401

1.4571/1.4401

1.4571/1.4401

1.4571/1.4401

1.4571/1.4401

t L G (fbv)

[mm] [m] [kg/m]

1.25 2.0 / 3.0 0.64

1.75 2.0 / 3.0 1.17

2.5 2.0 / 6.0 2.16

2.5 2.0 / 6.0 2.65

3.0 6.0 4.03

[mm] [mm] [mm] [mm] [mm]

14 11.0 x 25 6.5 x 15 11.0 x 14 6.5 x 10 6.5 100

14.5 12.2 x 20 – – 35

18 12.2 x 20 – – 35

22 12.2 x 20 – – 35

22 14.0 x 30 – – 50

e y2 e y1 A

[cm] [cm] [cm2]

0.90 0.90 0.89

1.40 1.40 1.33

1.90 1.70 2.54

2.00 2.10 3.14

3.04 3.16 4.78

Iy W y2 W y1 iy

[cm4] [cm3] [cm3] [cm]

0.34 0.37 0.37 0.61

1.23 0.91 0.86 0.96

3.96 2.32 2.09 1.25

6.57 3.13 3.29 1.45

20.38 6.44 6.70 2.06

ez Iz Wz iz

[cm] [cm4] [cm3] [cm]

1.30 1.11 0.86 1.12

1.40 1.97 1.41 1.22

1.80 5.95 3.30 1.53

2.05 9.36 4.57 1.73

2.05 15.18 7.35 1.78

Perforations Slot width ° Oblong hole (longitudinal) x-length ° Oblong hole (latitudinal) x-length Round hole Pitch (proportionally see hole pattern) [mm] Cross-sections Y-axis: Center of gravity distance Profile cross-section Moment of inertia Section modulus Inertia radius

Note Depending on the construction conditions, performance values of W-SL connectors and elements must be checked against the performance values of double U sectional beams. This applies to connections to the structure and/or with another W-SL double U sectional beam.

z-axis: Center of gravity distance Moment of inertia Section modulus Inertia radius Fire protection suitability certificate Permissible load values on request!

Installation situation, load and sag values 1) see MPA test report 2) via static calculation according to EUROCODE 3 on request

1)

2)

Technical data (t R) Yield stress Re or Rp0.2 210 N/mm2 a safety coefficient total of 1.5, an e-module = 196,000 N/mm2, and a maximum sag of Wfperm. = L/200 taken into account. tR = 20°C

MWF - 01/20 - 12589 - ©

Fk = 50

4

VARIFIX® C-ASSEMBLY RAIL 26/18 — C2C

Various mounting options with extensive system components Visually clean solution with no sharp edges thanks to the use of cover caps Easier alignment of the rails Using lateral graduation lines Noise insulation elements for every rail size

Width (B)

26 mm

Material thickness (t)

1.25 mm

Height (H)

Width of mouth (BÖ)

14.3 mm

25 mm

Elongated hole length 2 (LL2)

14 mm

Elongated hole length 3 (LL3)

15 mm

Elongated hole length 4 (LL4)

10 mm

Elongated hole length 5 (LL5)

25 mm

Hole distance (LA1)

22 mm

Hole distance 3 (LA3)

24 mm

Elongated hole width 2 (LB2) Elongated hole width 3 (LB3) Elongated hole width 4 (LB4) Elongated hole width 5 (LB5) Hole distance 2 (LA2) Surface

Weight per metre

Fire protection certified Material

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

18 mm

Elongated hole length (LL1)

Elongated hole width (LB1)

Heavy load thanks to favourable profile cross-sections

8 mm

11 mm 6.5 mm 6.5 mm 11 mm

16 mm Plain

638 g No

Stainless steel A4

Art. No.

0865 001 001

0865 001 221

Rail length (L)

2m

3m

P. Qty.

Included in delivery (Lieferumfang)

STEP - 2018-03-19 - 20368 - ©

Fastening with plastic frame anchor W-UR for C-rail 26/18

5

10

5 pcs. with length 2 m

15

5 pcs. with length 3 m

Fastening with mounting rail screw type MS for C-rail 26/18

VARIFIX® C-MOUNTING RAIL 28/28

Various mounting options with extensive system components Visually clean solution with no sharp edges thanks to the use of cover caps Easier alignment of the rails thanks to lateral graduation lines Noise insulation elements for every rail size High load-bearing capacity thanks to favourable profile crosssections

Width (B)

Height (H)

Material thickness (t)

28 mm 28 mm

1.75 mm

Width of mouth (BÖ)

14.5 mm

Elongated hole width (LB1)

12.5 mm

Surface

Bare

Elongated hole length (LL1) Hole distance (LA1) Weight per metre

Fire protection certified Material

20 mm

35 mm

1180 g No

Stainless steel A4

Art. No.

0865 001 003

0865 001 223

Rail length (L)

2m

3m

STEP - 2018-01-30 - 20369 - ©

P. Qty.

6

10

15

VARIFIX® C-ASSEMBLY RAIL 36/36 — C2C

Various mounting options with extensive system components Visually clean solution with no sharp edges thanks to the use of cover caps Easier alignment of the rails Using lateral graduation lines Noise insulation elements for every rail size Heavy load thanks to favourable profile cross-sections

Width (B)

36 mm

Material thickness (t)

2.5 mm

Height (H)

36 mm

Width of mouth (BÖ)

18 mm

Elongated hole length (LL1)

20 mm

Hole distance (LA1)

35 mm

Elongated hole width (LB1)

12.5 mm

Surface

Plain

Weight per metre

2159 g

Fire protection certified

No

Material

Stainless steel A4

Art. No.

0865 001 004

0865 001 230

Rail length (L)

2m

6m

P. Qty.

STEP - 2018-01-30 - 22371 - ©

Included in delivery (Lieferumfang)

7

10

5 pcs. with length 2 m

6 / 24

4 pcs. with length 6 m (affects PU 24m)

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

VARIFIX® C-MOUNTING RAIL 41/41

Various mounting options with extensive system components Visually clean solution with no sharp edges thanks to the use of cover caps Easier alignment of the rails thanks to lateral graduation lines Noise insulation elements for every rail size High load-bearing capacity thanks to favourable profile crosssections

Width (B)

41 mm

Material thickness (t)

2.5 mm

Height (H)

41 mm

Width of mouth (BÖ)

22 mm

Elongated hole width (LB1)

12.5 mm

Hole distance (LA1)

35 mm

Elongated hole length (LL1) Rebate height (HF) Surface

Weight per metre

Fire protection certified Material

Proof of Performance MPA Braunschweig Fire Protection Test Report no. 3612/5526 for mounting rails 41/41, 41/62, 41/82 and 41/124

20 mm

7.5 mm Bare

2649 g Yes

Stainless steel A4

Art. No.

0865 001 006

0865 001 231

Rail length (L)

2m

6m

STEP - 2018-01-30 - 20370 - ©

P. Qty.

8

10

6/24

VARIFIX® C-ASSEMBLY RAIL 41/62 — C2C

Various mounting options with extensive system components Visually clean solution with no sharp edges Thanks to the use of cover caps Easier alignment of the rails Using lateral graduation lines Noise insulation elements for every rail size Heavy load Thanks to favourable profile cross-sections

Art. No.

0865 001 232

Width (B)

41 mm

P. Qty.

Height (H)

Material thickness (t)

12

62 mm 3 mm

Width of mouth (BÖ)

22 mm

Elongated hole width (LB1)

14 mm

Hole distance (LA1)

50 mm

Elongated hole length (LL1) Rebate height (HF) Rail length (L)

Included in delivery (Lieferumfang) Surface

Weight per metre

Fire protection certified

STEP - 2018-01-30 - 22372 - ©

Material

9

30 mm

7.5 mm 6m

2 pcs. with length 6 m Plain

3980 g Yes

Stainless steel A4

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Proof of Performance MPA Braunschweig Fire Protection Test Report no. 3612/5526 for mounting rails 41/41, 41/62, 41/82 and 41/124

VARIFIX® BRACKET 26/18

Base plate height (H)

• Rail end plug included in scope of delivery • Assemblies with voltage peak-to-peak value ≤ 26 N/mm2

120 mm

Base plate width (B)

40 mm

Base plate thickness (t)

4 mm

Profile height (HP)

18 mm

Profile width (BP)

26 mm

Profile thickness (tP)

1.25 mm

Elongated hole width (LB1)

9 mm

Elongated hole length (LL1)

20 mm

Hole distance (LA1)

75 mm

Elongated hole length 2 (LL2)

29.5 mm

Elongated hole width 2 (LB2)

11.5 mm

Surface

Bare

Hole distance 2 (LA2)

50 mm

Material

Stainless steel A4

Art. No.

0865 009 001

0865 009 002

Effective length of bracket (X)

204 mm

304 mm

P. Qty.

1

Permissible load for loading scenario 1

Permissible load for loading scenario 2

Permissible load for loading scenario 3

Permissible load for loading scenario 4

Permissible load for loading scenario 5 Product weight (per item)

2.03 N/m 0.41 kN 0.2 kN

0.2 kN

0.14 kN 254 g

1

0.9 kN/m 0.27 kN

0.14 kN

0.14 kN

0.09 kN 335 g

STEP - 2018-03-19 - 20371 - ©

Application area Universal wall bracket for mounting piping etc.

Load case 1

10

Load case 2

Load case 3

Load case 4

Load case 5

VARIFIX® BRACKET 36/36

Base plate height (H)

120 mm

Base plate thickness (t)

8 mm

Base plate width (B)

• Rail end plug included in scope of delivery • Assemblies with voltage peak-to-peak value ≤ 26 N/mm2

40 mm

Profile height (HP)

36 mm

Profile width (BP)

36 mm

Profile thickness (tP)

2.5 mm

Elongated hole length (LL1)

20 mm

Hole distance (LA1)

75 mm

Elongated hole width (LB1)

13 mm

Elongated hole length 2 (LL2)

29.5 mm

Elongated hole width 2 (LB2)

11.5 mm

Hole distance 2 (LA2)

50 mm

Material

Stainless steel A4

Surface

Bare

Art. No.

0865 009 019

0865 009 020

0865 009 021

0865 009 022

0865 009 023

Effective length of bracket (X)

208 mm

308 mm

408 mm

508 mm

608 mm

P. Qty.

1

Permissible load for loading scenario 1

Permissible load for loading scenario 2

Permissible load for loading scenario 3

Permissible load for loading scenario 4

Permissible load for loading scenario 5 Product weight (per item)

20.32 kN/m 4.06 kN

2.03 kN

2.03 kN

1.35 kN 702 g

1

9.03 kN/m 2.71 kN

1.35 kN

1.35 kN 0.9 kN 885 g

STEP - 2018-03-19 - 22339 - ©

Application area Universal wall bracket for mounting piping, assemblies etc.

Load case 1

11

Load case 2

Load case 3

Load case 4

Load case 5

1

5.08 kN/m 2.03 kN

1.02 kN

1.02 kN

0.68 kN 1083 g

1

3.25 kN/m 1.63 kN

0.81 kN

0.81 kN

0.54 kN 1286 g

1

2.26 kN/m 1.35 kN

0.68 kN

0.68 kN

0.45 kN 1491 g

VARIFIX® HEAVY BRACKET 36/36

Width (B)

• Rail end plug included in scope of delivery • Assemblies with voltage peak-to-peak value ≤ 26 N/mm2

46 mm

Profile width (BP)

36 mm

Profile thickness (tP)

2.5 mm

Elongated hole width (LB1)

12.5 mm

Elongated hole width 2 (LB2)

11.5 mm

Hole distance 2 (LA2)

50 mm

Profile height (HP)

36 mm

Elongated hole length (LL1) Elongated hole length 2 (LL2) Surface

Material

25 mm

29.5 mm

Bare

Stainless steel A4

Art. No.

0865 009 040

0865 009 041

0865 009 042

0865 009 043

0865 009 044

Length (L)

307.5 mm

407.5 mm

507.5 mm

607.5 mm

707.25 mm

P. Qty.

1

Height (H)

Effective length of bracket (X)

255 mm

300 mm

1

280 mm

400 mm

310 mm

500 mm

1

340 mm

600 mm

1

370 mm

700 mm

Hole distance on wall attachment (LA1)

208 mm

233 mm

263 mm

293 mm

323 mm

Permissible load for loading scenario 9

2.91 kN

2.49 kN

2.28 kN

2.17 kN

2.06 kN

Product weight (per item)

Permissible load for loading scenario 8

Permissible load for loading scenario 7

Permissible load for loading scenario 6

1696 g

4.36 kN

38.7 kN/m

29.03 kN/m

2164 g

3.74 kN

24.92 kN/m

18.69 kN/m

Application area Universal wall bracket for mounting piping, assemblies etc.

STEP - 2018-03-19 - 20372 - ©

1

Load case 8

12

Load case 7

Load case 4 and 9

Load case 6

2690 g

3.41 kN

18.21 kN/m

13.65 kN/m

3158 g

3.25 kN

14.43 kN/m

10.82 kN/m

3682 g

3.08 kN

11.75 kN/m 8.81 kN/m

VARIFIX® TRIANGULAR BRACKET

Surface

Bare

Elongated hole length (LL1)

30 mm

Material

Stainless steel A4

Elongated hole length 2 (LL2)

Art. No.

P. Qty.

Suitable for mounting rail

Limb length (L)

Limb length 2 (L)

Thickness (t)

Elongated hole length 3 (LL3)

25 mm

0865 005 070

1

26 x 18 mm, 28 x 28 mm

86 mm

86 mm

5 mm

30 mm

0865 005 071

1

36 x 36 mm, 41 x 41 mm, 41 x 62 mm

106 mm

106 mm

6 mm

50 mm

Elongated hole width (LB1)

9 mm

11 mm

Elongated hole width 3 (LB3)

9 mm

11 mm

Elongated hole width 2 (LB2) Hole distance (LA)

Product weight (per item)

9 mm

35 mm

123.000 g

STEP - 2018-01-30 - 20373 - ©

Application area For the attached mounting of C-mounting rails • Lengthwise • Crosswise • Diagonal

13

11 mm 46 mm

229.000 g

Stainless steel connecting component for C-profiles A4

VARIFIX® FRAME BRACKETS

Material

Stainless steel connection components for C-profiles A4

Stainless steel A4

Surface

Bare

Art. No.

0865 005 050

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm 36 x 36 mm

41 x 41 mm, 41 x 62 mm

Limb length (L)

100 mm

150 mm

150 mm

Thickness (t)

3 mm

4 mm

4 mm

P. Qty.

Width of side (B) Diameter of hole (RL)

Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA)

Product weight (per item)

1

27 mm 9 mm

STEP - 2018-01-30 - 22374 - ©

1

35 mm 11 mm

0865 005 052 1

40 mm 13 mm

9 mm

11 mm

13 mm

20 mm

25 mm

25 mm

40 mm

60 mm

50 mm

196 g

560 g

614 g

Application area For the attached mounting of C-mounting rails • Longitudinal • Transverse • Diagonal

14

0865 005 051

VARIFIX® PROFILE BASE

For C-mounting rails

Elongated hole length (LL1)

25 mm

Material

Stainless steel A4

Surface

Bare

Art. No.

0865 005 110

0865 005 111

0865 005 112

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm

36 x 36 mm

41 x 62 mm, 41 x 41 mm

P. Qty.

Holder plate length (L) Holder plate width (B)

Holder plate thickness (t)

1

100 mm 50 mm 5 mm

1

135 mm 65 mm 6 mm

Profile length (Lp)

80 mm

100 mm

Profile height (Hp)

25 mm

36 mm

Profile internal width (Bp) Profile thickness (tp)

28.5 mm

3 mm

36.5 mm

4 mm

Elongated hole length 2 (LL2)

25 mm

30 mm

Elongated hole width 2 (LB2)

9 mm

11 mm

Elongated hole width (LB1)

9 mm

11 mm

1

135 mm 65 mm 6 mm

120 mm

41.5 mm 41 mm

4 mm

30 mm

13 mm

13 mm

Hole distance (LA1)

68 mm

100 mm

100 mm

Hole distance 3 (LA3)

30 mm

40 mm

55 mm

Hole distance 2 (LA2)

27 mm

STEP - 2018-01-30 - 20374 - ©

Application area For attaching C-assembly rails with heavy load on ground, ceiling, wall, and in shafts and channels.

15

37 mm

37 mm

VARIFIX® END BRACKET — C2C

Holder plate length (L)

120 mm

Hole distance on wall attachment (LA1)

75 mm

Holder plate width (B)

20 mm

Surface

Bare

Stainless steel A4

Art. No.

0865 005 140

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm 36 x 36 mm

P. Qty.

Holder plate thickness (t)

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

40 mm

Elongated hole length (LL) Material

For C-profiles. A4 stainless steel.

1

4 mm

0865 005 141 0865 005 142 1

8 mm

1

41 x 41 mm, 41 x 62 mm 8 mm

Hole distance 2 (LA2)

42 mm

50 mm

55 mm

Horizontal-section thickness (tQ)

4 mm

5 mm

5 mm

Horizontal-section length (LQ)

77 mm

90 mm

100 mm

Elongated hole width (LB)

Horizontal-section width (BQ) Nominal diameter (G) Weight

9 mm

22 mm 8 mm

213 g

STEP - 2018-01-30 - 22373 - ©

Application area For fastening C-mounting rails with light loads to: • Floors • Ceilings • Walls • In ducts and channels

16

9 mm

30 mm

10 mm 425 g

13 mm

35 mm

10 mm 476 g

VARIFIX® CONNECTION BRACKET, 90 DEGREES — C2C

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB Application area • Corner connections • Bracket structures and free structures

Elongated hole length (LL1)

25 mm

Surface

Bare

Hole distance (LA)

33 mm

Material

Stainless steel A4

Art. No.

0865 005 040

Suitable for mounting rail

26 x 18 mm, 26 x 26 mm, 36 x 36 mm 28 x 28 mm

41 x 41 mm, 41 x 62 mm

75 mm

90 mm

P. Qty.

1

0865 005 041

0865 005 042

1

1

Limb length (L1)

28 mm

36 mm

45 mm

Width of side (B)

25 mm

33 mm

40 mm

Limb length 2 (L2) Thickness (t)

4 mm

80 mm 5 mm

6 mm

Elongated hole length 2 (LL2)

15 mm

20 mm

20 mm

Elongated hole width 2 (LB2)

9 mm

11 mm

13 mm

Elongated hole width (LB1) Weight

9 mm 51 g

11 mm

13 mm

109 g

178 g

VARIFIX® CONNECTION BRACKET, 45 DEGREES

Elongated hole length (LL1)

25 mm

Material

Stainless steel A4

Surface

Art. No.

STEP - 2018-03-19 - 20375 - ©

P. Qty.

Application area • Corner connections • Bracket structures and free structures

Bare

0865 005 060

1

0865 005 061 0865 005 062

1

1

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm

36 x 36 mm

41 x 41 mm, 41 x 62 mm

Width of side (B)

25 mm

35 mm

40 mm

Limb length (L1)

68 mm

72 mm

84 mm

Thickness (t)

4 mm

5 mm

6 mm

Hole distance (LA)

33 mm

34 mm

30 mm

Elongated hole width (LB1) Weight

17

9 mm

80 g

11 mm

157 g

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

13 mm

246 g

VARIFIX® TRY SQUARE, 90 DEGREES, PRE-ASSEMBLED

Surface

Stainless steel A4

Art. No.

0865 005 120

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm 36 x 36 mm

P. Qty.

1

0865 005 121 0865 005 122 1

1

41 x 41 mm, 41 x 62 mm

Limb length (L1)

82 mm

95 mm

105 mm

Thickness (t)

5 mm

6 mm

6 mm

Width of side (B) Hole distance (LA)

Thread type x nominal diameter x length of clamping bolt (G) Weight

25 mm 42 mm

• Saves time on labour • No individual components

Application area • Corner connections • Bracket structures and free structures

Bare

Material

Secure plug-in assembly

35 mm 50 mm

40 mm

55 mm

M 8 x 16 mm

M 10 x 20 mm

M 10 x 20 mm

264 g

540 g

670 g

VARIFIX® CONNECTION BRACKET, 45°, PRE-ASSEMBLED — C2C

Secure plug-in assembly • Saves time on labour • No individual components Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Surface

Bare

Material Art. No.

0865 005 130

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm 36 x 36 mm

P. Qty.

Limb length (L1) STEP - 2018-03-19 - 20376 - ©

Stainless steel A4

Width of side (B) Thickness (t)

Hole distance (LA)

Thread type x nominal diameter x length of clamping bolt (G) Weight

18

1

0865 005 131 0865 005 132 1

1

79 mm

91.5 mm

97 mm

5 mm

6 mm

25 mm 42 mm

35 mm 50 mm

41 x 41 mm, 41 x 62 mm 40 mm 6 mm

55 mm

M 8 x 16 mm

M 10 x 20 mm

M 10 x 20 mm

270 g

540 g

670 g

Application area • Corner connections • Bracket structures and free structures

VARIFIX® RAIL CONNECTOR, PRE-MOUNTED — C2C

Material

Bare

Art. No.

0865 006 001

Suitable for mounting rail

26 x 18 mm, 28 x 28 mm 36 x 36 mm

P. Qty.

0865 006 002

1

1

0865 006 003 1

156 mm

180 mm

200 mm

Width 2 (B2)

22 mm

30 mm

33.5 mm

Thickness 2 (t2)

4 mm

5 mm

5 mm

Thickness (t1)

25 mm

35 mm

5 mm

40 mm

6 mm

6 mm

Hole distance (LA1)

42 mm

50 mm

56 mm

Weight

270 g

540 g

680 g

Nominal diameter (G)

8 mm

10 mm

10 mm

VARIFIX® RETAINING CLIPS

Height (H)

10 mm

Surface

Bare

Material

STEP - 2018-03-19 - 20377 - ©

The safe alternative to washers Prevents the sides of the C rail from bending upwards when loaded

Stainless steel A4

Art. No.

0865 005 150

0865 005 151

0865 005 152

0865 005 153

Diameter of hole (RL)

10.5 mm

10.5 mm

10.5 mm

13 mm

P. Qty.

Suitable for mounting rail Width (B)

Length (L)

Thickness (t) Weight

19

25

26 x 18 mm, 28 x 28 mm

25

36 x 36 mm

25 mm

30 mm

2 mm

2 mm

32 mm 17 g

42 mm 23 g

Application area Rail and bracket connections, bracket structures, free structures

41 x 41 mm, 41 x 62 mm

Length (L1)

Width (B1)

• Saves time on labour • No individual components Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Stainless steel A4

Surface

Secure plug-in assembly

25

41 x 41 mm, 41 x 62 mm 30 mm 45 mm 3 mm 41 g

25

41 x 41 mm, 41 x 62 mm 30 mm 45 mm 3 mm 40 g

Application area To stabilise the c-assembly rails in conjunction with hammer head bolts or hammer head fasteners.

VARIFIX® BASE PLATE

Four-point welding for metric thread

Surface

Bare

Material Art. No.

P. Qty.

Connection thread (G)

Length (L)

Width (B)

Thickness (t)

Elongated hole length (LL)

Elongated hole width (LB)

Hole distance (LA)

Product weight (per item)

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Stainless steel A4 0865 400 100

0865 400 101

10

10

M8

M10

80 mm

M12

80 mm

30 mm

18 mm

18 mm

9 mm

54 mm

57 g

4 mm

18 mm

9 mm

54 mm

40 mm

3 mm

18 mm

9 mm

120 mm

30 mm

3 mm

11 mm

54 mm

58 g

0865 400 106

10

M10

80 mm

30 mm

3 mm

0865 400 102

10

85 mm

70 g

159 g

0865 400 107

10

M12

120 mm

40 mm

4 mm

18 mm

11 mm

85 mm

164 g

0865 400 108

10

M16

120 mm

40 mm

4 mm

19 mm

11 mm

79 mm

191 g

Application area Food/beverage industry, chemical industry, outdoor installation.

For wall, floor and ceiling attachment in conjunction with TIPP FWR A4 pipe clip.

VARIFIX® BASE PLATE

Inert gas welding for imperial version Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Surface

Bare

Material Art. No.

0865 400 113

0865 400 115

0865 400 116

0865 400 117

Connection thread (G)

1 inch

1/2 inch

3/4 inch

1 inch

P. Qty.

Length (L)

STEP - 2018-03-19 - 20378 - ©

Stainless steel A4

Width (B)

Thickness (t)

Elongated hole length (LL) Elongated hole width (LB) Hole distance (LA)

Product weight (per item)

20

10

120 mm 40 mm 4 mm

19 mm

11 mm

79 mm 223 g

5

150 mm 80 mm 6 mm

25 mm

13 mm

100 mm 594 g

5

150 mm 80 mm 6 mm

25 mm

13 mm

100 mm 610 g

5

150 mm 80 mm 6 mm

25 mm

13 mm

100 mm 640 g

Application area Food/beverage industry, chemical industry, outdoor installation.

For wall, floor and ceiling attachment in conjunction with TIPP FWR A4 pipe clip.

VARIFIX® COMBINATION SLIDING NUT 36/41

Fits all rails of type 36 and 41, sizes M8–M16 A4 stainless steel

Suitable for mounting rail

36 x 36 mm, 41 x 41 mm, 41 x 62 mm

Length (L)

33 mm

Width (B)

29 mm

Thickness (t)

6 mm

Surface

Bare

Material

Stainless steel A4

Thread type x nominal diameter (G)

Product weight (per item)

Art. No.

P. Qty.

M10

42 g

0865 064 101

25

M8

M12

47 g

0865 064 102

41 g

M16

0865 064 100

0865 064 103

37 g

25 25 25

Can be stored in ORSY system

VARIFIX® CHANNEL NUT - C2C

Surface

Bare

Material

Stainless steel A4

Suitable for mounting rail Width (B) Length (L) 26 x 18 mm, 28 x 28 mm

13 mm

22 mm

26 x 18 mm, 28 x 28 mm

13 mm

22 mm

STEP - 2018-03-19 - 20380 - ©

26 x 18 mm, 28 x 28 mm 36 x 36 mm 36 x 36 mm 36 x 36 mm

41 x 41 mm, 41 x 62 mm 41 x 41 mm, 41 x 62 mm 41 x 41 mm, 41 x 62 mm

21

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

13 mm 18 mm 18 mm 18 mm 20 mm 20 mm 20 mm

22 mm 30 mm 30 mm 30 mm 35 mm 35 mm 35 mm

Thread type x nominal diameter (G)

Thickness (t)

M8

4 mm

M6

4 mm

M10

4 mm

M8

M10 M12 M8

M10 M12

6 mm 6 mm 6 mm 6 mm 6 mm 6 mm

Product weight (per item)

Art. No.

P. Qty.

8g 7g

0865 062 46

50

7g

0865 062 48

0865 062 410

50

22 g 24 g 20 g 26 g 28 g 27 g

0865 063 38

0865 063 310 0865 063 312 0865 064 008 0865 064 010 0865 064 012

50 50 50 50 50 50 50

VARIFIX® HAMMER HEAD FASTENER STANDARDFIX - C2C

Surface

Bare

Thread type

Metric thread

Material

Suitable for mounting rail

Washer Nominal diameter diameter (G) (d2)

26 x 18 mm, 28 x 28 mm 8 mm

26 x 18 mm, 28 x 28 mm 8 mm

26 x 18 mm, 28 x 28 mm 8 mm

36 x 36 mm

36 x 36 mm

36 x 36 mm

8 mm

8 mm

10 mm

10 mm

41 x 41 mm, 41 x 62 mm 8 mm

41 x 41 mm, 41 x 62 mm 8 mm

41 x 41 mm, 41 x 62 mm 10 mm

41 x 41 mm, 41 x 62 mm 10 mm

41 x 41 mm, 41 x 62 mm 12 mm

41 x 41 mm, 41 x 62 mm 12 mm

25 mm

25 mm

25 mm

25 mm

30 mm

30 mm

30 mm

30 mm

40 mm

40 mm

40 mm

40 mm

40 mm

40 mm

STEP - 2018-01-30 - 20379 - ©

Application area Recommended for direct fastening of pipe clamps

22

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Stainless steel A4

26 x 18 mm, 28 x 28 mm 8 mm

36 x 36 mm

Preassembled with nut and washer, A4 stainless steel

Length (L) 22 mm

22 mm

22 mm

22 mm

30 mm

30 mm

30 mm

30 mm

35 mm

35 mm

35 mm

35 mm

35 mm

35 mm

Width (B) 13 mm

13 mm

13 mm

13 mm

18 mm

18 mm

18 mm

18 mm

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

Thickness (t) 4 mm

4 mm

4 mm

4 mm

6 mm

6 mm

6 mm

6 mm

6 mm

6 mm

6 mm

6 mm

6 mm

6 mm

Length (hammer Washer thickness head and stud (h1) bolt) (LG)

25 mm

30 mm

40 mm

50 mm

30 mm

40 mm

40 mm

60 mm

40 mm

60 mm

40 mm

60 mm

30 mm

40 mm

1.5 mm

1.5 mm

1.5 mm

1.5 mm

3.0 mm

3.0 mm

3 mm

3 mm

3 mm

3 mm

3 mm

3 mm

3.5 mm

3.5 mm

Weight Art. No. 25 g

26 g

28 g

34 g

51 g

47 g

64 g

78 g

72 g

74 g

84 g

93 g

95 g

103 g

0865 100 001

0865 100 002

0865 100 003

0865 100 004

0865 100 010

0865 100 011

0865 100 020

0865 100 021

0865 100 030

0865 100 031

0865 100 040

0865 100 041

0865 100 050

0865 100 051

P. Qty. 50

50

50

50

50

50

50

50

25

25

50

50

25

25

PIPE CLAMP TIPP® SMARTLOCK STAINLESS STEEL — C2C

The standard hinged and jointed clamp. With exclusive Würth quick-action closure for secure, fast mounting Saves time and aids mounting Shorter clamping screw due to new closure mechanism Easier to tighten the screw Spring-mounted clamping screw Profile rubber, excellent sliding properties of pipes during premounting Sound insulation in line with DIN 4109

Min./max. temperature resistance

-40 to 110 °C

Silicone-free

Yes

Material

Tested for aging and weather resistance in accordance with DIN 53508 and DIN 53509

Stainless steel A4, 1.4578

Profile rubber thickness

3.5 mm

Metal belt Min./max. Connection Metal-band thickgrip range thread width (BM) ness (ØD) (G) (tM)

PermisWeight Art. No. sible load

15-19 mm

800 N

P. Qty.

11-15 mm

M8

20 mm

1 mm

800 N

30 g

0865 068 015

50

21-23 mm

M8

20 mm

1 mm

800 N

37 g

0865 068 023

50

26-28 mm

32-35 mm

40-43 mm

48-51 mm

52-56 mm

57-60 mm

62-65 mm

74-80 mm

83-91 mm

M8

M8

M8

M8

M8

M8

M8

M8

M8

M8

108-114 mm M8, M10

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

20 mm

23 mm

Can be stored in the ORSY® system

1 mm

1 mm

1 mm

1.5 mm

1.5 mm

1.5 mm

1.5 mm

1.5 mm

1.5 mm

1.5 mm 2 mm

STEP - 2014-12-03 - 20381 - ©

Application area Mounting of pipelines in any technical system, such as: Food/beverage industry, chemical industry, solar equipment, outdoor piping.

23

800 N

800 N

800 N

1200 N

1200 N

1200 N

1200 N

1200 N

1800 N

1800 N

32 g

41 g

47 g

53 g

58 g

78 g

80 g

88 g

98 g

103 g

207 g

0865 068 019

0865 068 028

0865 068 035

0865 068 043

0865 068 051

0865 068 056

0865 068 060

0865 068 065

0865 068 080

0865 068 091

0865 068 114

50

50

40

30

30

30

20

20

20 5

5

Notice Rubber insert: Not suitable for contact with food

M5 locking screw with combination slot for flat-head and cross recess screwdrivers Resistant to: Diluted acids and bases at room temperature; water and aqueous solutions up to +70°C; alcoholic solutions; ester and ketones, weather, sea water Conditionally resistant to: Greases and mineral oils; animal and plant oils and greases Not resistant to: Hot oils or greases; fuels; aliphatic and aromatic hydrocarbons Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

PIPE CLAMP TIPP® STAINLESS STEEL A4 - C2C

Two-piece pipe clamp for mounting pipelines in any technical system with significant load requirements.

Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Min./max. temperature resistance

-50 to 110 °C

Surface

Bare

Material

Stainless steel A4, 1.4401

Halogen-free

Yes

Silicone-free

Yes

Connection Min./max. grip Length (L) thread (G) range (ØD)

P. Qty.

12-15 mm

57.5 mm

M8

20 mm

1.5 mm

1000 N

49 g

0865 208 015

25

20-25 mm

67 mm

M8

20 mm

1.5 mm

1000 N

62 g

0865 208 025

25

15-19 mm 25-30 mm 31-37 mm 37-44 mm 45-52 mm 53-58 mm 59-65 mm 67-74 mm 74-80 mm 82-92 mm

90-102 mm

108-118 mm 120-130 mm 132-142 mm 159-169 mm 174-182 mm 192-200 mm 201-205 mm 206-214 mm 215-225 mm 241-248 mm 250-257 mm STEP - 2018-03-19 - 17359 - ©

Metal-band width (BM) Metal belt thickness (tM) Permissible load Weight Art. No.

272-277 mm

61.5 mm 72.3 mm 79.3 mm 86 mm

94.3 mm

101.3 mm 108.6 mm 124 mm

130.5 mm 141.5 mm 151 mm 168 mm 181 mm 193 mm 220 mm

237.5 mm 255.5 mm 261 mm

269.5 mm 280 mm 304 mm 313 mm 325 mm

M8 M8 M8 M8 M8 M8 M8

M10 M10 M10 M10 M10 M10 M10 M10 M16 M16 M16 M16 M16 M16 M16 M16

20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 25 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm

Application area Food and beverage industry, chemical industry, solar collectors, outdoor piping

24

1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 3.0 mm 3.0 mm 3.0 mm 3.0 mm 3.0 mm 3.0 mm 3.0 mm 3.0 mm

Notice Not resistant to oils, greases or fuels.

1000 N 1000 N 1000 N 1000 N 1000 N 1000 N 1000 N 1500 N 1500 N 1500 N 1500 N 1500 N 1500 N 1500 N 1500 N 3000 N 3000 N 3000 N 3000 N 3000 N 3000 N 3000 N 3000 N

54 g 64 g 71 g 79 g 85 g 91 g 94 g

138 g 153 g 172 g 176 g 182 g 273 g 294 g 337 g 640 g 680 g 700 g 730 g 760 g 820 g 850 g 900 g

0865 208 019 0865 208 030 0865 208 037 0865 208 044 0865 208 052 0865 208 058 0865 208 065 0865 208 074 0865 208 080 0865 208 092 0865 208 102 0865 208 118 0865 208 130 0865 208 142 0865 208 169 0865 208 182 0865 208 200 0865 208 205 0865 208 214 0865 208 225 0865 208 248 0865 208 257 0865 208 277

25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1

VARIFIX® BEAM CLAMP, STANDARD - C2C

Stainless steel A4, with threaded hole • With locking screw DIN 933 M10x40 with ring cutter (CP) and hexagonal jam nut DIN 439 Cradle to Cradle® -certified • Upgrading the building using non-hazardous materials • Wider range of application for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

Material

Stainless steel A4, 1.4401

Grip height (HK)

24 mm

Surface

Bare

Length (L)

50 mm

Height (H)

45 mm

Width (B) Art. No.

P. Qty.

Permissible load

Diameter of hole (RL)

Product weight (per item)

Suitable for threaded rods

21 mm 0865 200 002

10

1000 N

9 mm

173 g

M8

STEP - 2017-12-22 - 22330 - ©

Application area For securing to carriers for heating, ventilation and air conditioning engineering, acoustic constructions, electrical, pipe and sanitary installations, mechanical engineering and steel constructions etc.

25

0865 200 004

10

1000 N

11 mm

168 g

M10

0865 200 006

10

1300 N

13 mm

164 g

M12

VENTILATION DUCT CLAMP - C2C

Ventilation duct clamp for connecting flanged systems in low and medium-pressure systems Connection element for large duct cross-sections Can be used for low and medium-pressure systems Double ribbing over bending edges High quality and strength Quick and easy installation Eliminates costs for pre-clamping and drilling holes.

Art. No.

0865 007 001

Length (L)

35 mm

P. Qty.

Width (B)

Height (H)

Thickness (t)

Grip range (k)

Rebate length (LF)

Thread type x nominal diameter x length of clamping bolt Surface

Material

Length (clamping bolt)

Pressure load/tensile load

STEP - 2014-12-03 - 20382 - ©

Application area For use in the food industry, laboratory applications and outdoors.

26

100

20 mm 34 mm 3 mm

23 mm

17 mm

M 8 x 25 mm Plain

Stainless steel A4 25 mm

1.5 kN

Cradle to Cradle® -certified • Upgrading the building using nonhazardous materials • Wider range of applications for GreenBuilding and building certification in accordance with LEED®, BREEAM® and DGNB

STUD SCREW

A2 stainless steel

Thread type x nominal diameter x length (d)

Material

Art. No.

P. Qty.

M6 x 60 mm

Stainless steel A2

0865 540 660

100

M6 x 50 mm M6 x 80 mm

M6 x 100 mm M6 x 120 mm M8 x 50 mm M8 x 60 mm M8 x 80 mm

M8 x 100 mm M8 x 120 mm M8 x 140 mm M8 x 160 mm M8 x 180 mm M8 x 200 mm M10 x 80 mm

M10 x 100 mm M10 x 120 mm M10 x 140 mm M10 x 160 mm M10 x 180 mm M10 x 200 mm

Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2 Stainless steel A2

0865 540 650 0865 540 680 0865 540 610 0865 540 612 0865 540 850 0865 540 860 0865 540 880 0865 540 810 0865 540 812 0865 540 814 0865 540 816 0865 540 818 0865 540 820 0865 541 080 0865 541 010 0865 541 012 0865 541 014 0865 541 016 0865 541 018 0865 541 020

100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50

Compatible with ORSY storage system Related products for

0865 540 610–680

0865 540 …

STEP - 2018-03-19 - 20383 - ©

0865 541 …

27

Designation

Screwing tool for stud screws

Screwing tool for stud screws

Screwing tool for stud screws

Art. No.

0715 137 06

0715 137 08

0715 137 10

GALVANIZED STEEL HEXAGONAL SPACER SLEEVE

Material

Thread type x nominal diameter (M)

Length (l)

Wrench size (s)

Steel

M6

20 mm

10 mm

Steel

M6

30 mm

10 mm

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

Steel

M6

25 mm

M6

10 mm

50 mm

M8

10 mm

20 mm

M8

11 mm

25 mm

M8

11 mm

30 mm

M10

11 mm

20 mm

M10

13 mm

25 mm

M10

13 mm

30 mm

M10

13 mm

40 mm

M12

13 mm

40 mm

M12

17 mm

50 mm

M16

17 mm

40 mm

M20

24 mm

50 mm

Suitable for ORSY storage

30 mm

Corner dimension (e)

Strength class

Art. No.

P.

11.05 mm

11.05 mm

4

0974 6 20

100

11.05 mm

4

4

0974 6 30

50

11.05 mm

12.16 mm

12.16 mm

12.16 mm

14.38 mm

14.38 mm

14.38 mm

14.38 mm 18.9 mm

18.9 mm

26.75 mm

32.95 mm

0974 6 25

0974 6 50

4

0974 8 20

4

0974 8 25

4

0974 8 30

4

0974 10 20

4

0974 10 25

4

0974 10 30

4

0974 10 40

4

0974 12 40

4

0974 12 50

4

0974 16 40

4

0974 20 50

4

50

500

100

100 50

50

50

50

50

50

50

10

10

STAINLESS-STEEL A2 HEXAGONAL SPACER SLEEVE

Art. No.

0865 520 630

0865 520 830

0865 521 030

0865 521 240

0865 521 650

Material

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

P.

Thread type x nominal diameter (M) Length (l)

Wrench size (s)

Corner dimension (e)

STEP - 9/22/2014 - 17352 - ©

Storable in ORSY

28

100 M6

30 mm 10 mm

11.05 mm

100 M8

30 mm 13 mm

14.38 mm

100

M10

30 mm 17 mm

18.9 mm

50

M12

40 mm 19 mm

21.1 mm

25

M16

50 mm 24 mm

26.75 mm

GALVANIZED STEEL ROUND SPACER SLEEVE

Material Steel

Steel

Steel

Steel

Steel

Steel

Steel

Thread type x Length nominal diameter (l) (M)

Outer diam- Strength eter (d) class

Art. No.

P.

M8

11 mm

M8

20 mm

11 mm

4

0974 08 20

50

M8

30 mm

11 mm

4

0974 08 30

50

M10

M10

M10

M12

25 mm

20 mm

30 mm

40 mm

40 mm

13 mm

13 mm

13 mm

15 mm

0974 08 25

4

50

0974 010 20

4

50

0974 010 30

4

50

0974 010 40

4

50

0974 012 40

4

50

Suitable for ORSY storage

STAINLESS-STEEL A2 ROUND SPACER SLEEVE

Art. No.

0865 500 630

0865 500 830

0865 501 030

0865 501 240

0865 501 650

Material

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

stainless steel A2

P.

Thread type x nominal diameter (M) Length (l)

Outer diameter (d)

STEP - 9/22/2014 - 17353 - ©

Storable in ORSY

29

100 M6

30 mm 10 mm

100 M8

30 mm 13 mm

100

M10

30 mm 17 mm

50

M12

40 mm 19 mm

25

M16

50 mm 24 mm

NOTES

30

STAINLESS STEEL A4 C-MOUNTING SYSTEM & ACCESSOIRES Würth Limited Würth Centre Mdina Road Zebbug, ZBG9016 Malta Tel. +356 2149 4604 eshop.wuerth.com.mt sales@wuerth.com.mt

© by Würth Limited All rights reserved.

Editor: Marketing Department - Würth MT

Our general terms and conditions of sale, delivery and payment apply. They can be found at eshop.wuerth.com.mt Reprint only with prior permission MP033.21 We reserve the right to make any changes we deem necessary to improve the quality of a product, even without prior announcement or notification. Illustrations include sample illustrations and may differ in appearance from the actual goods delivered. Errors excepted.

We do not accept any liability for printing errors.