Greases and Lubricants - MARINE

GREASES AND LUBRICANTS FOR MARITIME

GREASES & LUBRICANTS

Lubricating Grease WGF 130 Art. No. 0893 530

MARINE Grease Multi-purpose Art. No. 0893 878 001

Maintenance oil Multi Cobra Art. No. 0893 055 400

• High-performance for lubricating rolling and plain bearings, guides, joints, splined shafts, threaded spindles as well as bearings •W ith extremely high surface pressures or impact loads

•M ulti-purpose grease for marine applications • P TFE based •N ot soluble in water • T emparture resistant up to 140ºC •S pecification: DIN 51502, NLGI Grade 2

• Lubricates, cleans and maintains •S tops creaking and squeaking and restores sliding properties of seized and jammed parts • R emoves rust and protects against corrosion • P enetrates and displaces moisture around electronics and electrics

Adhesive lubricant HHS® 5000 Art. No. 0893 106 3

Adhesive lubricant HHS® Lube Art. No. 0893 106 5

Adhesive lubricant HHS® Fluid Art. No. 0893 106 4

• E xtremely temperature-resistant, fully synthetic penetrating oil with PTFE (Teflon®) • R eliable wear protection – contains solid ­lubricant (PTFE) •D ry-running properties due to PTFE • L asting anti-slip protective film under high temperature loads • R esistant to spray water and salt water

• L ong-life spray grease with a high protective factor against weathering and environmental influences under extreme pressure •M inimises wear and substance loss of ­lubricating points • L ow adhesion of dust and dirt • R esistant to spray water and salt water – ­Lubricant does not wash off

•C entrifuge-proof low-viscosity grease with dual effect: Penetrating properties of an oil, adhesive and pressure-resistant as grease • R esistant to spray water and salt water

Adhesive lubricant HHS® Grease Art. No. 0893 106 7

Gear-Wheel spray Art. No. 0893 100 5

•H igh-quality, white, long-life maintenance grease with PTFE • E xcellent sealing behaviour against moisture and dirt • R eliable wear protection – contains solid lubricant (PTFE) •D ry-running properties due to PTFE • R esistant to spray water and salt water

•B lack, shear-resistant, high-pressure resistant special lubricant •N oise-and vibration-damping • P enetrates moisture and protects against corrosion • R esistant to spray water and salt water

High-temperature lubricant paste HSP 1400 Art. No. 0893 123

2

GREASES AND LUBRICANTS FOR MARITIME

• Metal-free lubricant paste that reduces wear, separates surfaces reliably and provides outstanding corrosion protection • High compressive strength • I deal as separating paste for stainless steel screw connections • R esistant to water, salt water, diluted acids and alkalines

Aluminium paste AL 1100 Art. No. 0893 110 10

Copper paste CU 800 Art. No. 0893 800 2

• Anti-seize aluminium/copper-based ­high-performance lubricant • P revents freezing and seizing, galling, wear, corrosion, frictional corrosion • R esistant to water, weak acids and alkali solutions

• Highly adhesive lubricating, separating and anti-corrosive copper paste • R esistant to water, diluted lyes and acids

HHS 5000 Extremely temperature-resistant, fully synthetic penetrating oil with PTFE (Teflon®)

Penetrates through to where ­lubricating is needed due to excellent creep

Temperature range: –20°C to +200°C

Reliable wear protection – contains solid lubricant (PTFE) Once the grease film has been stripped, lubrication is taken over by PTFE (dry-running properties) Lasting anti-slip protective film under high temperature loads

3

GREASES AND LUBRICANTS FOR MARITIME

Resistant to salt water

Suitable for lubrication in small gaps at marine engines, pumps, bearings, e.g.

GREASES AND LUBRICANTS FOR MARITIME

Würth Ltd Würth Centre Mdina Road Zebbug, ZBG 9016 Tel: (+356) 2149 4604 e- mail: sales@wuerth.com.mt https://eshop.wuerth.com.mt

No reproduction without prior permission.

© Würth Limited (Malta).

Marketing : MP042.20 - MARITIME. All rights reserved.

We reserve the right to make any changes we deem necessary to improve the quality of the product, even without prior consent or notification in the technical field leading to the improvement of the articles’ quality, as well as changes of design, model and color. While stocks last. Illustrations may be example illustrations that may differ in appearance from the goods supplied.

Errors excepted. We shall not be liable for any printing errors or misprints.

Our general terms and conditions apply.