Wurth Malta

MARINE PRODUCTS

2018 EDITION

CONTENTS MARINE GLUE WITH VERSATILE WATERPROOF TUBE

CLEANING BRUSHES

MARINE ADHESIVES FOR ALL SURFACES MARINE GREASE POWERFUL BOAT CLEANERS

HARDWARE

COMPOUNDS WITH WHITE FINISH

ALUMINUN AND STAINLESS STEEL CLEANERS

RIVETS HHS 2000 LUBRICANTS

AIRCONDITIONING CLEANER

P10 POLISHING PASTE

POLISHING FOAM

3M CUBITRON II CUTTING DISCS

VAKU, POLYESTER REPAIR RESIN

CLEAN & STRIP, SCOTCH BRITE XT DB DISCS

ARIZONA BRUSH DISC BD-ZB

MAINTENANCE AND TRAILER ACCESSORIES

PRE-POLISHING WHEELS

page 4

LUBRICATION

page 8

CLEANING

page 10

MIXED PRODUCTS

page 12

ADHESIVES

page 14

FASTENERS

page 16

HARDWARE STORE

page 18

CUTTING TOOLS

page 21

MILLING AND CUTTING

page 22

ABRASIVES AND FINSHES

page 24

TOOL STORAGE

page 24

HAND TOOLS

page 27

CLEANING AND PROTECTION

page 29

FURNITURE HARDWARE

page 30

ELECTRICS

page 32

MODYF

page 33

MISCELLANEOUS EQUIPMENT

page 34

LIFTING EQUIPMENT

page 36

PLUMBING

page 42

POWER TOOLS

C NTE CONTENTS

LUBRICATION RUST REMOVER ROST-OFF

MULTI 5 EN 1*

Art. N° 08902 – 300ml Art. N° 08903 – 5 L

Art. N° 0893 055 40 – 400ml Art. N° 0893 055 40 – 5 L Art. N° 0893 055 420 – Refillomat20 L

High capillary activity. Optimum creeping properties for excellent rust penetration, i.e. even stubborn, rusted-on screw connections are loosened. Penetrates rust and loosens seized up screws and bolts. Displaces and penetrates moisture, e.g. in the case of contact difficulties. Corrosion-protection additives for optimum corrosion protection. Provides lasting protection against further corrosion.

Loosens rusted bolts, pipe fittings, screws, nuts, joints, Bowden cables, shafts, locks etc. Infiltrates and displaces moisture around electronics and electrics Prevents corrosion on metals and electrical components, cable connections, relays, plugs, couplings etc. Prevents freezing up of lock cylinders and closures

SILICONE SPRAY* Art. N° 0893 221 – 500ml Art. N°0893 221 05 – 5L

Ensures long-lasting protection, preservation and insulation of vehicle exterior and interior plastic, rubber and metal parts; good lubricating properties

RUST REMOVER BOLTEX

DRY LUBRICANT SPRAY PTFE*

Art. N° 0893 250 250

Art. N° 0893 550 – 330ml

Mineral oil-free, high-tech rust remover with KENA® microfluid formula for loosening seized connections and for cleaning surface rust and rust spots Also loosens stubborn, seized screw connections

INJECTOR SOLVENT INJECTOR-EX*

ADHESIVE LUBRICANT HHS 2000 ®*

Art. N° 0893 300 250

Art. N° 0893 106 – 500ml

Mineral oil free injector and spark plug solvent with KENA® microfluid formula.

Special product for loosening injectors and spark plugs in assemblies and engines Gentle action, as seized connections can be loosened without substantial force application and the use of tools Product has a long-lasting effect, penetrates deeply and thus ensures optimal work results.

4

Dry lubrication, does not attract dirt and dust Eliminates squeaks, creaks and stiff movement. Offers lasting wear protection Film thickness of 10µm. Can be used for even the smallest tolerances in precision engineering.

* Danger: Observe the precautions for use.

Partly synthetic oil that is extremely resistant to high pressures. Extraordinarily tear-proof lubricating film with excellent noise and vibration dampening

HHS ® ADHESIVE LUBRICANT 5000*

MARINE GREASE

Art. N° 0893 106 3 – 500ml

Art. N° 0893 878 001 – 400 ml

Extremely temperature-resistant, fully synthetic penetrating oil with PTFE Reliable lubrication.

Penetrates through to where the lubricating oil is required (excellent creep) Ideal for non-visible lubrication points.

▸ Semi-synthetic PTFE based product, colour blue. ▸ Specially developed for uses in the field of the merchant marine, pleasure craft, commercial ports, waterways, etc. ▸ Ideal grease in wet and salty environments.

Suitable for lubrication of bodies under water spray, for bearings, bearings, rollers, pumps, chains, etc. ▸ Insolubility with water and steam.

ADHESIVE LUBRICANT HHS ® DRYLUBE* Art. N° 0893 106 6 – 400ml

Shear-proof dry synthetic wax with PTFE Dry synthetic wax. Lubricant with good centrifugeresistance on fast-turning and rotating parts Low dirt adhesion. Outstanding corrosion protection

▸ Use on equipment working in normal water and salt water. ▸ Good resistance to splashing water. ▸ Significantly improves the working conditions of many greasing mechanisms. ▸ Extreme extreme pressure (EP) capability, suitable for lubrication of loaded bearings and bearings. ▸ Very good resistance to vibrations. ▸ Very good resistance to external chemical attack and corrosion.

Art. N° 0893 878 001 Box Qty. : 1/12 Contents : 400 g

ADHESIVE LUBRICANT HHS® GREASE* Art. N° 0893 106 7 – 400ml

High-quality, white, long-life maintenance grease with PTFE. Excellent sealing behaviour against moisture and dirt. This provides optimum oxidation resistance and extends lubrication intervals. Excellent corrosion protection

ADHESIVE LUBRICANT HHS ® LUBE* Art. N° 0893 106 5 – 500ml

EP long-life spray grease with a high protective factor against weathering and environmental influences. Low adhesion of dust and dirt Ideal for open lubrication outdoors Longer lubricating grease life Outstanding sealing behaviour Extends lubrication intervals.

5

LUBRICATION MULTI-PURPOSE GREASE I Art. N° 0893 870 1

Lithium-soap, mineral-oil-based universal lubricating grease. Stable under heavy loads and resistant to oxidation. Forms an excellent seal to repel dust and dirt.

Good adhesive properties. In practical "pull-off" cartridge Silicone-free, acid-free, resin-free and AOX-free.

Notice Greases are supplied in plastic cartridges. The plastic cartridges improve storage (they prevent the grease from oozing out at high temperature). Store cartridges upright in a cool, dry place!

The operating instructions of the vehicle, machinery and assembly manufacturers must be observed! For further information, refer to the Technical Data Sheet.

SILICONE SPRAY GREASE Art. N° 0893 223 – Spray 500ml

Glass-like transparent, extremely lubricating and insulating silicone grease that displaces water.

Good protection against moisture and corrosion.

Extremely good at displacing water.

Good lubricating properties outstanding sliding properties on virtually all surfaces.

Very high electric resistance, excellent insulating effect, free from acids and resin Colour: Transparent when sprayed on; a cloudy glass-like film remains once it has flashed off

HAND-LEVER GREASE GUN Art. N° 0986 00

Properties: • Material: Steel • Material of the hose: Synthetic rubber • Material of the grip handle: Polyethylene • Product weight (per item): 1287g • Working pressure: 400 bar • Max. working pressure: 800bar • NLGI grade: 2

COPPER PASTE CU 800* Art. N° 0893 800 2 – 1kg Art. N° 0893 800 1 – 100g Art. N° 0893 800 – 300ml

HAND-LEVER GREASE GUN LUBE-SHUTTLE® Art. N° 0986 05

The system for lubricating greases in 400-g LUBE-SHUTTLE® system cartridges.

6

Highly adhesive lubricating, separating and anticorrosive copper paste that is extremely resistant to high temperatures and high pressures.

Temperature application range from -20°C to +1,200°C for dry lubrication. Resistant to water, diluted alkali solutions and diluted acids.

Provides long-lasting protection against fusing and seizing, galling, wear, corrosion and frictional corrosion.

Silicone-free and AOX-free

* Danger. Observe the precautions for use.

COOLING LUBRICANT CUT+COOL ULTRA Art. N° 893 050030 – 5L

Partly synthetic universal coolant Excellent cooling effect with outstanding removal of chips Especially low foaming Thanks to its low foaming tendency, it can also be used in areas with extremely low water hardnesses High degree of stability and particularly resistant to micro organisms

DRILLING/CUTTING OIL CUT AND COOL ECO Art. N° 0893 050 011 – 400ml

Biodegradable cutting oil with Eco-Stop.

ECO-Stop technology Up to 2500 applications as a result of a predefined quantity per valve actuation. Minimal smoke formation. Simple to use No cleaning of metals before assembly or further treatment (e.g. welding) required with low usage concentrations.

Neutral characteristics Suitable for areas where food is processed or stored. Can be used in contact with delicate materials, (e.g. marble, plastic, electrical components).

Odour-free

Notice: Free from chlorine, sulphur phosphorous, silicone, resin and mineral oil.

Free from substances that impair wetting of paint.

Non-conductive

For long service life with minimum maintenance Excellent corrosion protection Offers effective protection for workpieces, tools and system components, even at low concentrations Strong lubricating performance High cutting performance.

Reduces heat due to low friction Can improve machining speed

OIL BINDING GRANULES MICRO ABSORBER Art. N° 0890 61 – 10Kg

Highly effective, quick-acting oil binding granules for universal use (type III/R). Highly absorbent, quickacting Less material is used, meaning reduced disposal costs 1 kg oil binding granules bind approximately 1.01 litres of oil (Westinghouse).

The fine granule capillary system encapsulates the absorbed material and does not release it

CLEANING CLOTH, TEXTILE Art. N° 0899 800 200. – 37cm × 34cm

For picking up coarse dirt and absorbing oils, greases, coolants and solvents.

Material: Reclaimed cotton, polypropylene, polyester

7

CLEANING WORKSHOP CLEANER BMF

INDUSTRY CLEANER*

Art. N° 8931182 – Canister 5L Art. N° 8931183 – Canister 20L

Art. N° 0893 140 – Spray 500ml Art. N° 0893 140 05 – Canister 5L Art. N° 0893 140 520 – Canister 20L

Environmentally friendly cleaning agent for workshops, machinery and vehicles. No phosphates, solvents and corrosive substances Extremely biodegradable.

Can be used mechanically, manually or in high-pressure units Powerful at dissolving grease but is still mild and gentle on materials Does not attack paints, rubber or plastics Fast-separating in waste water in accordance with German Ecological Standard Test B 5105 pH value: 9.4.

High-quality special cleaner for removing adhesive tape residue, labels and film stickers as well as stubborn dirt. NSF-certified. Gentle on materials. Delicate surfaces such as aluminium, brass and stainless steel are not attacked. No unpleasant odours for users and the environment Fast and effective cleaning, Acetone-free , Silicon and AOX-free

Silicone-free and AOX-free.

ADHESIVE LUBRICANT PRE-CLEANER HHS® CLEAN Art. N° 0893 1061 0 – Spray 500ml

Highly effective pre-cleaner + adhesion promoter (primer function) specifically matched to HHS products.

Good cleaning performance.

Quick and effective, easily removes the most stubborn soiling. Primer function. Improves adhesion of lubricant.

Extends lubrication intervals. Saves time and money.

Short flash-off time.

Short downtimes for treated parts. No second application required. Good material compatibility with various surfaces. Extremely wide application range.

Seals do not swell. Spray head with direct jet.

WASHING BRUSH, 150mm X 250mm Washing brush with water passage, rotary joint and rubber edge.

A water passage ensures optimum water distribution. Swivel-mounted brush with patented rotary action. Diagonally arranged bristles can reach all areas. Split hair tips so that the brushes draw in lots of water cleaning that is gentle on paint thanks to split and therefore softened bristles.

Targeted and precise cleaning of dirty parts.

Acetone-free, AOX-free and silicone-free

PUMP SPRAY BOTTLE Art. N° 0891 503 001– 1L

Spray bottles for simple processing of products from canisters and drums. Safe manual removal from portable containers.

Tactile elements for easy opening. Ergonomic, sturdy spray atomiser with long handle.

Work made less tiring thanks to low operating force.

Can also be attached to the workshop trolley.

STAINLESS STEEL CARE * ALUMINIUM HANDLE Art. N° 0891350103

Aluminium handle with water passage, 1560mm. Robust, impact-proof and easy-to-grip plastic, ensuring convenient and functional use. 1/2" and 3/4" water hoses can be connected to the handle; these are secured using a pipe clip. The handle can be used with pressure of up to 6 bar.

8

* Danger. Observe the precautions for use.

Art. N° 0893 121 – Spray 400ml Art. N° 0893 1210 – Spray 400ml Art. N° 0893 1211 – Paste 400g Art. N° 0893 1212 – Spray 500ml

Cleaning care emulsion for metallic surfaces.

Nurturing, creamy emulsion with cleaning effect. Dirt, cleaning and wiping marks and greasy, oily finger prints are thoroughly removed. Can be used on vertical surfaces.

CONTACT SPRAY OXIDATION SOLVENT* Art. N° 0893 60 Art. N° 0893 61 Art. N° 0893 70 Art. N° 0890 104

– Contact Spray Oxidation Solvent - 200ml – Contact Spray Oxidation Protection - 200ml – Contact Protective Lacquer - 200ml – Battery Terminal Protector - 150ml

AIR CONDITIONING PURIFYING SPRAY*/ ** Art. N° 1893 764 10 – 300ml

Special cleaner to clean and purify vehicle air conditioning systems. DPurifies, cleans and protects.

Reliably eliminates germs, bacteria and fungus.

Effectively neutralises unpleasant odours. Inhibits allergic reactions that can be triggered by bacteria and other micro-organisms.

Achieves long-term effect by disinfecting and cleaning at the “point of origin”. Thorough spray cleaning also penetrates thicker, greasy layers of dirt.

INTERIOR REFRESHING SPRAY * / ** Art. N° 1893 764 24 Art. N° 1893 764 25 Art. N° 1893 764 26

ACETONE CLEANER*

For effectively controlling interior odours One-shot application.

• Lavender Fragrance • Pine Fragrance • Vanilla Fragrance

Art. N° 0893 460 – Bottle1L Art. N° 0890 106 605 – Canister 2.5L

Special cleaner for unpainted metal surfaces and glass. Outstanding cleaning performance Greases, oils and other soiling are softened and removed quickly and effectively. Dissolves various paint residues. High volatility The cleaner leaves behind no residue on the material being cleaned.

ZINC CLEANER* Art. N° 0893 460 100 – Bottle 1L

Ammoniacal wetting agent cleaner for galvanised surfaces. Particularly for cleaning and degreasing fresh galvanised surfaces.

Prevents adhesion problems. Paint adheres even better thanks to top coat activation. Suitable for preparing hot-galvanised, spray-galvanised and electrolytically galvanised surfaces.

THROTTLE VALVE CLEANER* Art. N° 5861 113 500 – Spray 500ml

Special, highly active system cleaner for 2- and 4-stroke engines. Cleaning without removal.

Overhead valve. Hard-to-reach areas can be easily accessed. Outstanding cleaning performance.

Optimum carburettor performance. Perfect throttle valve function. Engine runs smoothly.

Faults caused by dirty throttle valves or carburetors are rectified.

** Use biocides carefully. Read the label and product information before use.

9

MIXED PRODUCTS DIESEL INJECTION CLEANER*

POLISHING PADS

Art. N° 5861 011 300

Polishing pads in three different abrasive grades

For cleaning all common passenger car and truck diesel engines

Art. N° 0585 02. ..

Art. N° 586 101 001 – 1L

FAST GRINDING POLISH P10 PLUS Art. N° 0893 150 012

START RAPID*

Starting aid spray Art. N° 0890 11

Highly abrasive high-gloss polish for quickly removing surface defects in fresh repairs and fully hardened top coats.

Rapid engine starting aid for cold starts which are gentle on the battery, with proven combination of active agents

HIGH-GLOSS POLISH P20 PLUS Art. N° 0893 150 022 Medium-abrasive high-gloss polish for efficient paint preparation

OUTSTANDING LONG-TERM PROTECTION AND OPTIMUM METAL SURFACE APPEARANCE Art. N° 0893 1.. - Spray 400ml

ANTI-HOLOGRAM POLISH P30 PLUS Art. N° 0893 150 032 High-gloss finish polish for permanently removing streaks and holograms on dark vehicle paints

LAMBSKIN, WHITE Art. N° 0585 ... ..

COMBINATION POLISH P55 PLUS

For professional polishing work on heavily stressed and weathered paint surfaces.

Art. N° 0893 150 56

10

Prepare and seal paint in a single step

COCKPIT CLEANING AND CARE SPRAY Art. N° 0890 22 21 Provides outstanding cleaning power and gentle care in a single step.

Cleaning and care in a single product Only short time required to treat the vehicle interior For universal use on all plastic components in the vehicle interior

CLEANING CLOTH TEX-REIN Art. N° 0899 810 This robust, extremely moistureresistant wiping cloth is suitable for cleaning smooth and sensitive surfaces (e.g. final cleaning prior to painting).

• Can be removed separately due to special fold • Extremely tear-proof and moisture-proof • Resistant to solvents • Lint-free • Very absorbent • Can be washed, wrung out and re-used

CAR AND WINDOW CHAMOIS

GLASS CLEANER

Art. N° 0899 700 630

Art. N° 0890 022 001 – 500ml

Made from real sheepskin

Art. N° 0890 022 002 – 5L

High water absorption capacity Faster working

MICROACTIVE CLOTH PROFESSIONAL Art. N° 0899 900 131.

Art. N° 0899 900 132.

Art. N° 0899 900 133.

For streak and lint-free results; perfect for daily cleaning and vehicle conditioning.

Extremely high cleaning power

• • • •

Environmentally friendly.

Gentle on materials.

Efficient Completely removes finger prints, dust, nicotine stains and residues.

CLEANING PAPER ECO LINE Art. N° 0899 800 773 • • • • • • •

In rolls Very absorbent Fits all common dispensers Different ply and widths Virtually lint-free Food-safe Highly absorbent and tear-proof

Attracts dust due to static effect. Time-saving

MICROACTIVE CLOTH PRO-DUO Art. N° 0899 900 138 Microfibre cloth with two different sides for excellent and universal use Loopless Will not scratch paint Optimum high-gloss finish

RUBBER BLADE WIPE-N-SHINE With handle for removing drops of water Art. N° 0891 350 20.

(Art. N°0891 350 103) (Art. N°0891 350 104)

11

ADHESIVES ADHESIVE SEALANT MULTI PU MARINE Multi PU Marine adhesive sealant Art. N° 0893 291 1 – White 310 ml Art. N° 0893 291 3 – Black 310 ml

Meets the requirements of BV 0062

ADHESIVE SEALANT POWER PU MARINE* Art. N° 0892 292 1

Meets the requirements of BV 0062 Approved for bonding applications in ship and boat building.

Approved for bonding applications in ship and boat building.

Wide adhesive range.

Versatile elastic PU adhesive and sealant for marine applications with broad adhesive range of materials.

High elasticity compensates for different degrees of material stretching. Vibration-damping and noise-damping. Can be sanded and painted over

High elasticity compensates for different degrees of material stretching.

Mechanical finishing possible after skin formation.

The sealant can be painted over to a degree.

Virtually odourless. High resistance to ageing and weathering.

Vibration-damping and noise-damping.

Slow skin formation time Permits the bonding and/or sealing of large components. Mating parts can be repositioned. Can be sanded and painted over.

Excellent adhesion to a broad range of materials.

High UV resistance, ageing resistance and weather resistance.

310ml CARTRIDGE GUN WITH PVC HANDLE Art. N° 1891 852 Suitable for applying metal and plastic cartridges • • • • •

Powerful thrust Ergonomic PVC handle Easy releasing of thrust piston The brake is released only with one hand Inserted cartridge is held by two teeth without cartridge falling out from the gun

SUPER RTV SILICONE ADHESIVE AND SEALING COMPOUND High-quality adhesive and sealing compound for use in industry and the automotive sector.

Art. N° 0893 3211 Black – 200ml

12

* Danger. Observe usage instructions.

VAKU LIGHT

MEDIUM-STRENGTH SCREW RETAINER

Art. N° 993140

HIGH-STRENGTH SCREW RETAINER

Art. N° 0893 243 025 – Medium 25g

Art. N° 0893 270 025 – High Strength 25g

FILLER VAKU 60 Art. N° 0892 606 02 Polyester resin-based TINMetallic filler with aluminium pigmentation for vehicle construction and vehicle repairs

INSTANT ADHESIVE SUPER-FAST GLUE* Art. N° 0893 09 – 20g

FILLER VAKU 70 Art. N° 0892 607 02 Glass fibre reinforcement filler for bridging cracks, holes and for repairing glass fibre reinforced plastics

2C PLASTIC ADHESIVE 25SEC REPLAST EASY Art. N° 0893 500 0 2-component adhesive for repairing plastic parts – for rapid attachment 2-component adhesive for the repair and bonding of many types of plastic Low number of adhesives to be stored

FOLD MASKER Fold masker cover film with adhesive strip Art. N° 0992 405 …

Edge-adhering HDPE film • Pre-folded • Lightly embossed • Charged with static electricity Art.-no.: 0992 405 055 55cm x 33mt Art.-no.: 0992 405 140 140cm x 33mt Art.-no.: 0992 4052 66 266cm x 20mt

VAKU 80 + VAKU 90* Art. N° 0892 608 01 and 0892 609 01 Laminating resin for repairing larger holes and damage to GFRP parts in conjunction with glass fibre mats and fabric Balanced resin mixture Excellent application properties

13 * Danger. Observe the precautions for use.

ADHESIVES & FASTENERS DOS system: Practical one-handed operation thanks to the clever turn lock, You always have one hand free. Continuously adjustable dispensing system. Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck. Costs optimised thanks to emptying with virtually no remaining product

FABRIC ADHESIVE TAPE

SELF-FUSING SHRINK TAPE

Plastic-coated universal adhesive tape

Enables waterproof and water-impermeable sealing of a variety of materials.

Art. N° 0874 100 2xx

Art. N° 0985 077 20.

DOUBLE SIDED TAPE Art. N° 0894 910 .

Double-sided adhesive tape that can withstand high loads, with polyethylene backing and acrylate adhesive

PRECISION MASKING TAPE Art. N° 0992 00 ..

MIRROR ADHESIVE TAPE Art. N° 0894 918 ...

Double-sided adhesive tape with polyethylene backing and acrylate adhesive

14

Special paper tape for stringent requirements during masking work in the automotive, metal and painting sectors

STEEL HEXAGONAL HEAD BOLT , 10.9, ISO 4014 Art. N° 0052...

ZINC COATED HEXAGONAL HEAD BOLT 8.8, ISO 4017 Art. N° 0057...

A1 STAINLESS STEEL CUP WASHER, NF E 27 Art. N° 04575...

STAINLESS STEEL HEXAGONAL HEAD BOLT A2 & A4/70, ISO 4017 Art. N° 0096...

Art. N° 0091...

A4 STAINLESS STEEL PENNY WASHER, DIN 125 (ISO 7089) Art. N° 0407...

Art. N° 0408...

COUNTERSUNK STAINLESS STEEL, A4 SCREWS (FHC), ISO 10642 (DIN 7991) Art. N° 0299...

ZINC PLATED HEXAGONAL NUT, DIN 934 Art. N° 0317...

STANDARD BLIND RIVETS ALUMINM / STEEL Art. N° 0936...

A4 STAINLESS STEEL HEXAGONAL NUT Art. N° 0326...

Art. N° 0714551500

HEXAGONAL NUT WITH FLANGE DIN 6923 Art. N° 0379...

HEXAGONAL NUT, HIGH PROFILE WITH CLAMPING PIECE (NONMETAL INSERT) - DIN 982 Art. N° 0368...

Art. N° 0714 551 450

HEXAGONAL NUT, HIGH PROFILE WITH CLAMPING PIECE (NON-METAL INSERT) - DIN 985 Art. N° 0391...

Art. N° 0397...

15

HARDWARE STORE Our chandlery stores a complete range of stainless steel fittings.

Premium products made of stainless steel, which are used primarily in water sports and other marine activities, but also in other high end applications.

Fasteners and fittings made of stainless steels from A1 to A5 in all strength categories and made of various special materials in accordance with DIN, EN or ISO, as well as all major international standards.

16

17

CUTTING TOOLS TAPPING CYLINDER SAW, HSS BI-METAL LONGLIFE & SPEED HSSCO8

PREMIUM RANGE

Art. N° 0632 900 …

Box Version

HSSCO8 BI-METAL CYLINDER SAW ASSORTMENT LONGLIFE & SPEED Art. N° 0964 632 900

PREMIUM RANGE DOUBLE RINGS PREMIUM MACHINE SCREW TAP HSS-E

Steel Stainless Steel Aluminium Hardox

Art. N° 0653 100 …

Art. N° 0655 100 …

Art. N° 0656 100 …

Art. N° 0654 100 …

PREMIUM MACHINE SCREW TAP HSS-E

Steel Stainless Steel Aluminium Hardox

Art. N° 0653 010 …

Art. N° 0655 010 …

Art. N° 0656 010 …

Art. N° 0654 010 …

ARTISAN RANGE MACHINE SCREW TAP HSS-E For through hole. Available from 3 to 30 mm diameter for steel only.

Steel Stainless Steel Aluminium Hardox

18

Art. N° 0653 …

Art. N° 0655 …

Art. N° 0656 …

Art. N° 0654 …

MACHINE SCREW TAP HSS-E Blind hole notch shape C, blue ring, for general steels up to a strength of 1000 N/mm2, construction and casehardened steels, cast steel, nodular cast iron and malleable iron.

Art. N° 0653 0 …

Steel Stainless Steel Art. N° 0655 0 …

Art. N° 0656 0 …

Aluminium Art. N° 0654 0 …

Hardox

DRILLING HSS CENTRE DRILL BIT Art. N° 0636 1.. …

TWIST DRILL BIT HSCO DIN 338 TYPE RN OXIDE Art. N° 0626 ... …

19 pieces. Precise high-performance drill bit for machining stainless steel (such as V2A, V4A), heat-resistant steels and titanium. Also suitable for general, broad applications in steel up 1000 N/mm² strength, as well as in cast iron.

Art. N° 0626 000 002

TWIST DRILL BIT HSCO DIN 338 TYPE RN OXIDE Art. N° 0618 800 …

19 pieces. Precise high-performance drill bit for machining stainless steel (such as V2A, V4A), heat-resistant steels and titanium. Also suitable for general, broad applications in steel up 1000 N/mm² strength, as well as in cast iron Art. N° 0618 800

TWIST DRILL BIT HSCO WN TYPE RH

Art. N° 0618 11. …

25 pieces. Robust, specialist drill bits for machining hard-tomachine materials (such as Hardox) with extremely high strengths up to 1400 N/mm², such as excavator shovels, truck add-ons, armour plates, snow ploughs, agricultural machinery etc.

Art. N° 0618 110 004

TWIST DRILL BIT HSS CO8 WN TYPE RH

TWIST DRILL BIT HSS DIN 345 TYPE RN

Art. N° 0618 30 …

The extra stable morse taper drill bit with 8% cobalt alloy for column drills for working with hard-to-machine materials (e.g.

Hardox) with extremely high strengths of up to 1,400 N/mm², such as excavator shovels, lorry attachments, armour plating, snow ploughs, agricultural machinery, etc.

Art. N° 0628 … …

Excellent value steel morse taper drill for general, broad applications in steel with a strength of up to 850 N/mm² and cast iron for use in column-type drills.

TWIST DRILL BIT HSS CO8 WN TYPE RH Art. N° 0618 30 …

The extra stable morse taper drill bit with 8% cobalt alloy for column drills for working with hard-to-machine materials (e.g. Hardox) with extremely high strengths of up to 1,400 N/mm², such as excavator shovels, lorry attachments, armour plating, snow ploughs, agricultural machinery, etc.

TWIST DRILL HSCO DIN 1869 R1 TYPE RN The extra-long, twisted stainless steel deep hole drill for processing stainless steel (e.g. V2A, V4A), heat-resistant steels and for a wide range of general applications in steel with strength of up to 1,000 N/mm² and cast iron.

Art. N° 0626 46. … (20xD) Art. N° 0626 56. … (25xD) Art. N° 0626 66. … (30xD)

19

CUTTING TOOLS TWIST DRILL ASSORTMENT HSS DIN 338 TYPE RN 130° Art. N° 0624 000 ...

Steel precision drill for general, broad applications in steel up to 850 N/mm² strength and cast iron.

19 pieces Art. N° 0624 000 001 25 pieces Art. N° 0624 000 004 55 pieces Art. N° 0624 000 002 91 pieces Art. N° 0624 000 003

TWIST DRILL BIT HSS DIN 338 TYPE RW Art. N° 0624 11. ...

25 pieces Aluminium professional drill for precision drilling in soft and long-chipping materials with a strength up to 600 N/mm² (e.g. aluminium and aluminium alloys ≤ 10% Si, zinc, copper, thermosetting plastics).

Art. N° 0624 110 004

TWIST DRILL DIN 338 HSS TIN HEAD TYPE RN Art. N° 0624 02. ...

TWIST DRILL BIT HSCO DIN 338 TYPE RN OXIDE Precise long-life drill with magma coating for processing of stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also suitable for general applications in steel with strength up to 1,200 N/mm² and in cast iron.

Up to 9 times longer service life compared to uncoated drills plus up to 2 times longer service life compared to conventional coatings (resistant up to temperatures of 800°C) and up to 50% higher cutting speed compared to uncoated drill bits Special Magma multilayer coating 19 pieces Art. N° 0626 040 001 25 pieces Art. N° 0626 040 004

5XD - Art. N° 0626 050 ...

Forme C

TWIST DRILL BIT HSCO DIN 338 TYPE RN MFD VARIO

Premium all-rounder for use in stationary machines for highly accurate processing of almost all materials, e.g. stainless steel, heat-resistant steels and titanium and for general applications in conventional steel up to a strength of 1,200 N/mm² in cast iron and non-ferrous metals (such as magnesium alloys, brass, bronze, plastic).

19 pieces Art. N° 0626 050 001 25 pieces Art. N° 0626 050 004

20

Affûta

MILLING AND SAWING CONICAL COUNTERSINK ASSORTMENT GREEN RING, HSCO 90°, DIN 335C

OSCILLATING MULTI TOOL BLADES Art. N° 0696 503.

Art. N° 0694 019 01 6 pieces, consisting of diameters 6.3– 20.5 mm. Particularly suitable for processing stainless steel, alloyed or high-alloy and rust- and acid-resistant steels.

Burr- and chatter-free countersinking and deburring Precision conical countersink with 3 cutting edges, precision-ground

TRADE SET FOR JOINERS Art. N° 0696 609

STEPPED TWIST DRILL BIT TIALN Art. N° 0694 423 412

JIGSAW BLADE, STAINLESS STEEL CARBIDE MILLING BIT WITH MX TEETH

Art. N° 0615 25. …

Art. N° 0616 000 000

JIGSAW BLADE, METAL Art. N° 0608 116 …

CUTTING DISC SPEED PLUS FOR STAINLESS STEEL BI-METAL SAW BLADE HSS Art. N° 0603 301 13

Art. N° 0664 130 ...

METAL BOW SAW Art. N° 5760 071 001

CUTTING DISC, CARBIDE-TIPPED Art. N° 0667 410 122

BODY SAW BLADE WITH FLAT ADAPTER Art. N° 0696 914 1

21

ABRASIVES AND FINISHING DRY SANDPAPER DISC ARIZONA® PERFECT

SANDER WITH SUCTION

Art. N° 5506 353 0..

Art. N° 0586 300 004

SANDING BLADE ROLLER Art. N° 0672 900 ...

SANDING PLATE D 150 MM Art. N° 0586 600 …

POLISHING RING Art. N° 0673 03 …

WOOD DRY SANDPAPER DISC KP PERFECT Art. N° 0583 531 ...

POLISHING PASTE Art. N° 0673 05 1 Art. N° 0673 05 2 Art. N° 0673 05 3

DRY SANDPAPER STRIP ARIZONA® PERFECT Art. N° 5506 144 1..

DRY SANDPAPER STRIP ARIZONA® PERFECT Art. N° 5506 132 0..

22

CUTTING DISC 3M CUBITRON II

SANDING DISC 984F 3M CUBITRON II ROLOC Art. N° 5M49...

Art. N° 5M65… acier

SEGMENTED SANDING DISC 3M CUBITRON II Art. N° 5M65…

acier

BRISTLE DISC Art. N° 6730 007 55.

Universally applicable high-Performance cleaning disc for use on pneumatic axial grinders (angled), ductile wave and pneumatic or electric angle grinders 115 mm (with Ø75 mm in conjunction with M14 holder)

3M SCOTCH-BRITE GB-DH FLEECE DISC WITH CENTRING HOLE Art. N° 5M… ..

VULCANISED FIBRE DISC 987C 3M CUBITRON II Art. N° 5M46...

3M™ CUBITRON™ II GRINDING DISCS

SUPPORT PLATE, VULCANISED FIBRE DISCS 3M CUBITRON

Art. N° 5M94...

Art. N° 5M64...

HOLDER FOR BRISTLE DISC Art. N° 0586 673 05

23

HAND TOOLS

TOOL STORAGE

SMALL RADIATOR ROLLER PROFESSIONAL Hard-wearing cover in high-quality polyamide Art. N° 0693 011 • 12 mm pile • Shape retaining • Solvent-resistant • Long service life • Even finish

FLAT PAINTBRUSH ECONOMIC

WORKSHOP TROLLEY STANDARD

Art. N° 0693 04..

For solvent-based lacquer and paint systems

Art. N° 0962 613 700

• • • •

Information for painters: Thickness 6 Pure pale china bristles Tin ferrule Unpainted wood handle

STANDARD BUCKET Art. N° 0695 770 12 Art. N° 0695 770 20

ORSY SYSTEM

2

2

SCREWDRIVER SET 1

Art. N° 0613 932 25 Consists of 5 screwdrivers with one-piece hexagon blade/ wrench adapter made from tempered, impact-resistant material and large striking cap

4 1 4 8

1

2 1

4

2

VDE SCREWDRIVER SET, SLOTTED/PH RECESSED HEAD Art. N° 0613 963 25

4 2 1 1

4 1 Base Unit : 1.1.1

8

2

24

4

5 pieces • Blade: burnished, insulated • Standard: Individually tested in line with IEC 60900:2004 • Scope of delivery: One screwdriver each slotted 0.4 x 2.5; slotted 0.8 x 4.0; slotted 1.2 x 6.5, PH1, PH2

SECURITY BIT ASSORTMENT, 29 PCS. Art. N° 0614 250 300

COMBINATION WRENCH ASSORTMENT, SHORT TYPE Art. N° 0713 301 40

TORQUE WRENCH Art. N° 0714 71 2.

1/4 INCH SOCKET WRENCH ASSORTMENT Art. N° 0965 11 32

PLIERS ASSORTMENT 1 Art. N° 0714 01 560

ALLEN KEY SET, HEXAGON SOCKET Art. N° 0715 40 100

VDE PLIERS ASSORTMENT, IEC 60900 Art. N° 0714 01 580

25

HAND TOOLS.....

WATER PUMP PLIERS DIN ISO 8976

STAINLESS STEEL CUTTING BLADE

Art. N° 0715 02 ..

Art. N° 0715 66 0 …

GLASS SCRAPER Art. N° 0715 66 08

STILLSON WRENCH Art. N° 715 610 …

2C CUTTER KNIFE WITH SLIDE Art. N° 0715 66 275

POCKET TAPE MEASURE SCRAPER AND BLADE SET Art. N° 0715 66 40 …

PAINTER'S SPATULA Art. N° 6859 409 ...

26

Art. N° 0714 64 51.

CLEANING AND PROTECTION DISPOSABLE VINYL GLOVES

CUP-SHAPED MASK CM 3000 FFP1 NR D

Art. N°0899 463 …

Art. N°0899 110 5..

DISPOSABLE NITRILE GLOVES

HALF FACE MASK HM 173

Art. N°0899 470 …

Art. N°0899 173

MECHANICS' GLOVES Art. N°0899 400 5..

TYVEK® PROTECTIVE SUIT CLASSIC XPERT Art. N°0899 02 ...

FIRST AID KIT CASE Art. N°0899 520 6

27

CLEANING AND PROTECTION HAND CLEANER PLUS

WORKSHOP PROFESSIONAL HAND CLEANER

Art. N°0893 9000

Art. N° 0893 935 ..

HAND CLEANER BASIC Art. N°0893 900 015

SANITARY CLEANER EASY-TO-CLEAN Art. N°0893 117 005

Hand cleaner for light to heavy soiling with natural exfoliating particles Gentle on the skin • Highly concentrated wash-active substances combined with gentle natural exfoliating particles for perfectly cleaned hands • Adjusted to the skin's natural pH value • Soap-free • Dermatologically tested Biodegradable, wood-based exfoliating agent Alkali-free, solvent-free and silicone-free

TOILET PAPER Art. N°0899 900 250

28

FURNITURE HARDWARE WOOD CONNECTOR PLATE

GLUE DISPENSER UNIT Art. N°0892 100 0

Art. N°0907 250..

• Design: Serrated common beech • High strength as connection plate expands slightly when glued

SERRATED DOWEL Art. N°0907 008 …

• Design: Common beech • Chamfered on both sides • 8–10% wood moisture content

MISCELLANEOUS ELECTRICS VIDEO, BASIC ENDOSCOPE

CABLE FLY ROLL

Art. N° 0715 53 962

Art. N° 0770 11.

• PVC external sheath • Free of silicone, cadmium and lead

29

ELECTRICS STANDARD CABLE TIE WITH PLASTIC LATCH

THIN-WALLED HEAT-SHRINK HOSE

Art. N° 0502 1...

Art. N° 0771 0.. ..

EARTHING STRAP CLAMP

HOLE MOUNTING FOR CABLE TIE FIX Art. N° 05021104

Art. N° 0969 101 ...

CABLE TIES, STAINLESS STEEL AISI 304 WITH BALL LOCK Art. N° 820 6 …

HEAT-SHRINK CRIMP BUTT CONNECTOR

ELECTRICAL INSULATING TAPE

Art. N° 0555 516 .

Art. N° 0985 … ..

WRAPPING HOSE, STANDARD Art. N° 1771 ...

30

INSULATED CABLE CONNECTOR ASSORTMENT Art. N° 59640 558 00

DOUBLE FLASHING BEACON, 12 V/24 V Art. N° 0812 42 117

BATTERY/CHARGING SYSTEM TESTER Art. N° 0772 800

FLAT BLADE FUSES MINI/MAXI SILVER ASSORTMENT Art. N° 5964 0731 01

POLE TERMINAL BRUSH Art. N° 0715 516 95

MINI DIGITAL MULTIMETER Art. N° 0715 53 370

SEMI-AUTOMATIC STARTER Art. N° 0772 9..

31

MODYF : WORKING CLOTHES THE NEW WÜRTH MODYF CATALOG AVAILABLE FROM WÜRTH IN ZEBBUG OR VICTORIA GOZO

JEANS AND WORK TROUSERS

JACKETS, PARKAS AND WORK JACKETS

PULLOVERS, FLEECES AND WORK SWEATS

WORKING JACKETS

SAFETY BOOTS S3 KÖLN Art. N°899 8591 ..

STRETCH X S3 SAFETY SHOE Art. N°M418 099 ...

Flexible and innovative safety shoes with comfortable stretch inserts. Ideal for activities that require frequent kneeling.

32

• • • • • • •

Safety Boots S3 UNI EN ISO 20345:2011 Water-proof bovine printed leather Breathable lining Antistatic insole Composite toe-cap Kevlar midsole

MODYF : WORKING CLOTHES ACTIVE LONG-SLEEVE SHIRT & ACTIVE LONG TIGHTS Art. N°M053 034 …

Art. N°M052 029 …

• Seamless • Highly functional temperature-regulating zones, breathable • Effective moisture management • Soft seams, light cuffs • Anti-bacterial finish

MISCELLANEOUS EQUIPMENT BATTERY-POWERED LED HAND-HELD LAMP, WLH 1+1 PREMIUM Art. N°0827 940 111

• Latest lithium-ion battery technology • Short charging time, long light duration • Plastic hooks • Can be rotated 360° and folded away • Powerful magnet • Number of LEDs • 1 x stripe LED 1.2 W • 1 x LED 1 W (torch function) • 1 x indicator light — signals that the light needs to be charged

HANK KNITTED HAT Art. N°M374 056 999 Warm, comfortable and casual knitted hat with a wide band.

LED HEAD LAMP HIGH-POWER SL2 Art. N°0827 809 200

• Dimmable • Focusable • 90° swivelling lamp head

TOOL BOX POLYPROPYLENE PREMIUM STRETCH-FIT POLO SHIRT

Art. N°0962 219 ...

Art. N°M347 07. …

Polo shirt with details in contrasting colours. High stretch rate gives you ample freedom of movement.

WEATHER PROTECTION RAIN SET EN 343 Art. N°899 090 006

Compact rain kit for perfect protection against moisture and rain. Robust, watertight and hard-wearing.

33

LIFTING EQUIPMENT ROUND SLING Art. N°713 50 ...

RATCHET LASHING BELT, SPITZ HOOK Art. N°0713 929 949 Art. N°0713 929 951 Ratched lansing belt with double pointed hook

LIFTING STRAP Art. N°713 50 …

Properties: • Material: PES - Polyester • Min./max. temperature conditions: -40 to 100°C • EN standard: 1492-1

LC strapping

LC straight pull

40 kN 50 kN

20 kN 25 kN

34

Length

Width

Color

m 9,5 10

mm 50 50

Crvena Crvena

Preload force daN 400 400

SHF standard manual force daN 50 50

Art. Nr.

P/Qty

0713 929949 0713 929951

1 1

HIGH QUALITY POLYESTER ROPES Art. N°HRTT …

LIFTING AND LOCKING ACCESSORIES

LOW PROFILE FOLDABLE ENGINE CRANE 1T Art. N° 0997 715 023

STAINLESS STEEL WIRE CABLE Art. N°M803 64 ...

35

PLUMBING

STEEL WIRE PVC ARMOFLEX HOSE Art. N°HRTN018 ...

Construction

INSIDE DIAMETER

•

Tube: smooth transparent pvc.

•

Reinforcement: steel wire helix.

•

Cover: weathering and most chemicals resistant transparent pvc.

•

Surface: smooth extruded.

•

Temperature range: -10C +60C

THICKNESS

mm mm

inch inch

mmmm

10 10

3/8” 3/8”

3 3 3 3

12 12

15/32” 15/32”

13 13

1/2” 1/2”

14 14 16 16 18 18 19 19 20 20 22

WORKING PRESSURE

kg/mtlbs/ft lbs/ft bar inchinch kg/mt 0.12” 0.12” 0,160.16 0,110.11

7

0.12” 0.12” 0,180.18 0,120.12

7

9/16” 9/16”

3 3 3,23.2

0.13” 0.13” 0,230.23 0,150.15 6

5/8” 5/8”

3,23.2

0.13” 0.13” 0,270.27 0,180.18 6

23/32” 23/32” 3,23.2 3/4” 3/4”

3,53.5

25/32” 25/32” 3,53.5 7/8”

22 7/8” 1” 25 1” 28 1.3/32” 30 1.3/16” 30 1.3/16” 32 1.1/4” 32 1.1/4” 35 1.3/8” 35 1.3/8” 38 1.1/2” 38 1.1/2” 40 1.9/16” 40 1.9/16” 45 1.3/4” 45 1.3/4” 51 51 2” 2” 60 2.3/8” 60 2.3/8” 63 2.1/2” 63 2.1/2” 70 2.3/4” 70 2.3/4” 75/76 76 3” 3” 80 3.5/32” 80 3.5/32” 100/102 102 4” 4” 25

WEIGHT

3,5

3.5 4 4 4.2 4,2 4.2 4,2 4.5 4,5 4.5 4,5 4.5 4,5 5 5 5 5 6 6 6 6 6,56.5 7 7 7 7 7 7 4

0.12” 0.12” 0,200.20 0,130.13 7

0.13” 0.13” 0,300.30 0,200.20 6 0.14” 0.14” 0,310.31 0,210.21 6 0.14” 0.14” 0,320.32 0,220.22 5 0.14”

0.14” 0.16” 0.16” 0.17” 0.17” 0.17” 0.17” 0.18” 0.18” 0.18” 0.18” 0.18” 0.18” 0.20” 0.20” 0.20” 0.20” 0.24” 0.24” 0.24” 0.24” 0.26” 0.26” 0.28” 0.28” 0.28” 0.28” 0.28” 0.28” 0.16”

0,38

0.38 0.49 0,56 0.60 0,60 0.65 0,65 0.73 0,73 0.80 0,80 0.87 0,87 1.15 1,15 1,251.25 1,801.80 1,951.95 2,202.20 2,502.50 2.702.70 3.403.40 0,49

All technical specifications apply to a temperature of

0,26

5

0,33

5

0.26 0.33 0,37 0.40 0,40 0.44 0,44 0.49 0,49 0.54 0,54 0.58 0,58 0.77 0,77 0,840.84 1,211.21 1,311.31 1,481.48 1,681.68 1.811.81 2.282.28

4,5 4,5 4,5 4 4 3 3 3 2,5 2,5 2 2 2 2

7 7 7 6 6 6 6 5 5 5 4.5 4.5 4 4 3 3 3 2.5 2.5 2 2 2 2

BENDING RADIUS

psi psi

bar bar

mm mm

0,8 0.8

20 20 0.79” 0.79” 3030 25 25 0.98” 0.98” 3030

105105

0,8 0.8

105105

0,8 0.8

inchinch

LENGTH

105105

mtmt

30 30 1.18” 1.18” 3030 30 30 1.18” 1.18” 3030

ftft 98,4 98.4 98,4 98.4 98,4 98.4

90 90

0,8 0.8

90 90 90 90

0,8 0.8 0,8 0.8

35 35 1.38” 1.38” 3030 40 40 1.57” 1.57” 3030

90 90 75 75

0,8 0.8 0,8 0.8

45 45 1.77” 1.77” 3030 50 50 1.97” 1.97” 3030

98,4 98.4

75

0,8

55

98,4

75 75 67,6 67.5 67,5 67.5 67,5 60 60 60 60 45 45 45 45 45 45 37,537.5 37,537.5 30 30 30 30 30 30 30 30 75

0.8 0.8 0,8 0.8 0,8 0.8 0,8 0.8 0,8 0.8 0,8 0.8 0,8 0.8 0,8 0,8 0.8 0,7 0.7 0,7 0.7 0,7 0.7 0,7 0.7 0.7 0.7 0.6 0.6 0,8

2.17”

55 2.17” 2.95” 75 2.95” 85 3,35” 90 3.54” 90 3.54” 95 3.74” 95 3.74” 105 4.13” 105 4.13” 115 4.52” 115 4.52” 120 4.72” 120 4.72” 135 5.31” 5.31” 135 150 5.90” 150 5.90” 180 7.09” 180 7.09” 190 7.48” 190 7.48” 8.27” 210210 8.27” 8.86” 225225 8.86” 9.45” 240240 9.45” 11.81” 300300 11.81” 75

C±2 C23(ISO 291) – tolerance on all specifications ±5%.

Other diameters and/or pressures are feasible upon request - The characteristics and technical data could be changed without warning.

36

VACUUM

30

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 3030 3030 3030 3030 3030 3030 3030 30

98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4

98.4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98,4 98.4 98.4 98.4 98.4 98,4

EXHAUST HOSE Art. N°HRTN0129 ...

Hardwall corrugated cover rubber hose. Extremely flexible. The construction ensures bending radius up to 1/1.5 for the inside diameter. Marine exhaust hose suitable also for cooling the heat exchangers on pleasure boats up to 24 mt.

• Standards SAE J 2006:2003 R2 - ISO 13363:2004 Ti-po 2 Classe B. • Approved LLOYD’S REGISTER N. 96/00127 - R.I.NA N. DIP 075110CS • Temperature range: -30Deg. C +100Deg. C Construction Tube: black, smooth marine exhaust, inert gases, hot water, sea water and low concentration chemical products resistant rubber • Reinforcement: double steel wire helix and high strength synthetic textile yarn.

• Cover: black, abrasion, heat, and weathering resistant rubber.

• Surface: corrugated fabric finished.

• APPROVED - LLOYD’S REGISTER N. 9600127 - R.I.NA N. DIP 075110CS” • Listino a rilievo “SAE J 2006:2003 R2 - ISO 13363:2004 Tipo 2 Classe B i.d. q.le year” INSIDE DIAMETER

THICKNESS

WEIGHT

WORKING PRESSURE

BURST PRESSURE

VACUUM

BENDING RADIUS

mm

inch

mm

inch

kg/mt

lbs/ft

bar

psi

bar

psi

bar

mm

inch

20 25 30 32 35 38 40 45 51 55 57 60 63.5 70 76 80 90 102 110 114 120 127 130 142 152 155 175 203 254 305

25/32” 1” 1.3/16” 1.1/4” 1.3/8” 1.1/2” 1.9/16” 1.3/4” 2” 2.5/32” 2.1/4” 2.3/8” 2.1/2” 2.3/4” 3” 3.5/32” 3.17/32” 4” 4.5/16” 4.1/2” 4.3/4” 5” 5.1/8” 5.19/32” 6” 6.1/8” 7” 8” 10” 12”

4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 8 8 9 10

0.16” 0.16” 0.16” 0.16” 0.16” 0.16” 0.16” 0.16” 0.20” 0.20” 0.20” 0.20” 0.20” 0.20” 0.20” 0.20” 0.20” 0.20” 0.24” 0.24” 0.24” 0.24” 0.24” 0.24” 0.24” 0.28” 0.31” 0.31” 0.35” 0.39”

0.57 0.61 0.68 0.76 0.82 0.88 0.92 1.10 1.16 1.25 1.27 1.35 1.60 1.72 1.95 2.10 2.50 2.96 3.20 3.30 3.45 3.65 3.80 4.10 4.20 4.50 6.20 6.90 8.50 10.90

0.38 0.41 0.46 0.51 0.55 0.59 0.62 0.74 0.78 0.84 0.85 0.91 1.08 1.16 1.31 1.41 1.68 1.99 2.15 2.22 2.32 2.45 2.55 2.76 2.82 3.02 4.17 4.64 5.17 7.33

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45 45

9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9

135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135

0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03 0.03

20 25 30 32 35 38 40 45 51 55 57 60 63.5 70 76 80 90 152 220 230 240 255 260 285 305 465 525 815 1270 1830

0.79” 0.98” 1.18” 1.26” 1.38” 1.50” 1.57” 1.77” 2.00” 2.17” 2.24” 2.36” 2.50” 2.76” 2.99” 3.15” 3.54” 5.98” 8.66” 9.06” 9.45” 10.04” 10.24” 11.22” 12.00” 18.31” 20.67” 32.09” 50.00” 72.00”

All technical specifications apply to a temperature of

LENGTH mt

ft

20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 20 65.5 10/20 65.5 20 65.5 10 32.8 10/20 32.8/65.5 10 32.8 10 32.8 10/20 32.8/65.5 10 32.8 10 32.8

C±2 C23(ISO 291) – tolerance on all specifications ±5%.

Other diameters and/or pressures are feasible upon request - The characteristics and technical data could be changed without warning.

37

PLUMBING HOSE CLAMPS A4 Art. N°0538 … …

SEALING RING ASSORTMENT Art. N° 5964 046 000

O-RING METRIC ASSORTMENT PIPE AND FASTENING CLAMP MULTIFIX

Art. N° 5964 046 800

Art. N° 0542 … …

SCREW CONNECTION SEAL

THIN-WALLED HEAT-SHRINK HOSE ASSORTMENT Art. N° 5964 077 100

Art. N° 0876 010 19 • • • •

High pressure resistance High temperature resistance DVGW-approved KTW-approved

WRAPPING HOSE Art. N° 0771 0.. …

RIVET NUTS, COUNTERSUNK HEAD ASSORTMENT Art. N° 5964 094 802

O-RING MOUNTING KIT ASSORTMENT Art. N° 5964 0468 06

38

2K EPOXY PRIMER

2K Epoxy Primer for Osmosis Protection Suitable for: Barrier coating for preventing osmosis on fibreglass and steel hulls.

Features: 2-component epoxy primer highly waterproof suitable for application both on metals and fibreglass. Outstanding resistance to abrasion and chemicals.

Application: Apply 2K epoxy primer on properly primed supports. Dry abrasive blast on steel before application, obtaining a 25 - 75µ. Clean and apply directly on fibreglass. Be sure surfaces are clean, dry and free from oil, grease and any other contaminants. Apply 3 - 4 coats by roller for optimum osmosis protection.

Colour White Grey

Contents 1125 ml A+B 1125 ml A+B

Art. No.

P. Qty.

EP 90 9010

1

EP 90 7040

1

Technical data: Temperature range for application > +10°C at relative humidity less than 80%.

Mixing ratio 2 : 1 by volume.

Pot life of 1 hr at 21°C and less at higher temperature.

Touch dry after 4 to 6 hrs at 25°C 50% RH. Recoat after 24 hrs.

Maximum recovering time 36 hrs.

Calculated coverage 1.4 m²/kg - 2 m²/ltr - 500µ.

Calculated consumption 710 g/m² - 490 ml/m² 500µ.

Available in Grey RAL 7040 and/or White RAL 9010.

39

ANTIFOULING LF50

Antifouling LF50 is a superior paint Suitable for: high speed boats. It is designed to protect GRP, wood or light alloys hulls. The colour stays uniform above and below the waterline, Excellent abrasion resistance also during towing. Not recommended for slow moving boats or for long stationery periods.

Features: Antifouling LF50 is a superior self-polishing and self-smoothening copper free antifouling paint. Available in matt white, red, black or blue finishes.

Art. No.

Colour

P. Qty. [ltr.]

LF50BLACK

Black

1 - 2.5 - 5

LF50RED

Red

1 - 2.5 - 5

LF50BLUE

Blue

1 - 2.5 - 5

LF50LGBLUE

Light Blue

1 - 2.5 - 5

LF50WHITE

White

1 - 2.5 - 5

Application: Apply Antifouling LF50 on suitable epoxy primers and/or other antifouling paints by sanding between coats. Be sure surface is clean, dry and free of oil, grease and any other contaminant. Application method by brush or roller applying two or three coats. Stir well before use.

Technical Data: Dry Film Thickness

80 ÷ 100 µ (160 ÷ 200 wet)

Coats

2-3

Calculated Coverage

3.9 m²/ kg - 6.25 m²/ ltr. - 80 µ

Calculated Consumption

250 g/m² - 156 ml/ltr. - 80 µ

Environmental Conditions

Min.temp. for satisfactory cure is +5ºC (60ºF) with relative humidity less than 85%

Dry Times (25ºC - 70ºF - 50% U.R)

to touch: 1-2 hrs to recoat: 12 hrs launch time: 24 hours

Max Recovering Time

not critical

Recommended Finish

none

Storage Stability

12 months on condition that the material is indoors, in a sealed drum and protected against heat and frost.

40

Additional articles: Epoxy Pre-Primer: Art. No. AMSEALER Epoxy Primer: Art. No. AM 2

ANTIFOULING DRP51

Antifouling DRP 51 Self-polishing paint Suitable for: Boats operating at medium or low speed (below 35 knots) and/or with long stationary periods with outstanding performances in every sea. It is not suitable for aluminium and light alloys.

Features: Antifouling DRP 51 is a self-polishing and self-smoothening antifouling paint. DRP 51 has a controlled leaching rate, that guarantees a constant release of active ingredients without polluting the marine environment. It contains special anti-slime additives. Antifouling DRP 51 is hydrophillic, therefore it reduces friction between water and keel.

Art. No.

Colour

P. Qty. [ltr.]

DRP51BLACK

Black

1 - 2.5 - 5

DRP51RED

Red

1 - 2.5 - 5

DRP51BLUE

Blue

1 - 2.5 - 5

DRP51LGBLUE

Light Blue

1 - 2.5 - 5

DRP51GREY

Grey

1 - 2.5 - 5

Application: Apply Antifouling DRP 51 on suitable epoxy primers and/or other antifouling paints by sanding between coats.

Be sure surface is clean, dry and free of oil, grease and any other contaminant.

Application method by brush or roller applying two or three coats. Stir well before use.

Technical Data: Dry Film Thickness

80 ÷ 100 µ (160 ÷ 200 wet)

Coats

2-3

Calculated Coverage

3.8 m²/ kg - 6.35 m²/ kg

Calculated Consumption

260 g/m² - 155 ml/m²

Environmental Conditions

Min.temp. for satisfactory cure is +5ºC (60ºF) with relative humidity less than 85%

Dry Times (25ºC - 70ºF - 50% U.R)

to touch: 1-2 hrs to recoat: 12 hrs launch time: 24 hours

Max Recovering Time

not critical

Recommended Finish

none

Storage Stability

12 months on condition that the material is indoors, in a sealed drum and protected against heat and frost.

Additional articles: Epoxy Pre-Primer: Art. No. AMSEALER Epoxy Primer: Art. No. AM 2

41

POWER TOOLS OSCILLATING JIGSAW STP 140 EXACT-S OSCILLATING JIGSAW

ELECTRIC SANDING FILE ESF 500-E

Art. N°5706 700 1 With rod handle, ideal for high-precision applications.

Art. N°0702 470 Low-noise, lightweight electric sanding file for sanding, polishing, deburring and burnishing.

PNEUMATIC BRUSH SANDER DBS 3500 Art. N°0703 351 0

ECCENTRIC DISC-TYPE SANDER ETS 150-E TWIN

Very lightweight and handy drive machine to save you time when removing underbody seal, sealing compounds, paint, rust and films

Art. N°0702 129 0 With two lifting levels for coarse and fine sanding and with 6-hole grinding plate for 150-mm grinding discs.

MULTI-CUTTER EMS 2.0 Art. N°0702 698 1

Universal, extremely handy machine with oscillating drive.

Electronic adjusting dial Optimum adjustment of number of oscillations Lower vibrations and faster progress

PNEUMATIC ECCENTRIC DISC-TYPE SANDER DTS 152 C COMPACT Art. N°0703 753 1 Extremely powerful random orbital sander for oil-free operation with fine or rough sanding No oil residue on worked surfaces and effective work progress

ELECTRONIC HOT AIR BLOWER HLG 2000

Oil-free and high-performance pneumatic motor

Art. N°0702 202 0 Handy, lightweight device with continuous temperature regulation.

42

BATTERY-POWERED TANGENTIAL IMPACT SCREWDRIVER ASS 18-1/2 INCH HT Art. N°0700 725 4 Very powerful and ergonomic battery-powered impact screwdriver with high torque Suitable for screwdriver diameters up to max. M20.

BATTERY-POWERED IMPACT DRILL DRIVER BS 18-A EC POWER COMBI Art. N°5700 508 2 Extremely powerful, handy battery-powered screw driller designed specifically for tough construction site conditions. Battery capacity can be selected freely thanks to PICK YOUR POWER. • • • • • •

ANGLE GRINDER EWS 14-125-EQ UNIVERSAL Art. N°5707 005 0 Powerful 1400-W universal angle grinder with speed control, anti-vibration handle and the highest power density in its class for rapid progress with work. Ideal for tough rough machining and cutting work.

Adapts ideally to the material and task at hand

STRAIGHT GRINDER GS 700-E Art. N°0702 520 0 High-power model, small and powerful.

For use in hard-to-reach areas • • • •

Lightweight collar design Safety cut-out Restart protection Thermal overload protection

Robust design for construction site conditions.

Long motor service life Maximum service life and low wear Well lit working area Anti-recoil protective function Precision torque limiter

PERCUSSION DRILL SB 13-XE

INDUSTRIAL WET AND DRY VACUUM CLEANER ISS 35

Art. N°0702 322 1

Art. N°0701 138 1

Universal 750-watt 13-mm hammer drill with impressively fast drilling progress and long service life.

Universal high-power vacuum cleaner suitable for use on construction sites. Socket on the device, making it suitable for use with electric tools.

43

WÜRTH MALTA

Würth Ltd Würth Centre Mdina Road Zebbug, ZBG 9016 Tel: (+356) 2149 4604 Fax: (+356) 2144 1081 e-mail: sales@wuerth.com.mt www.wuerth.com.mt

AT YOUR SERVICE

No reproduction without prior permission.

© Würth Limited (Malta).

Marketing : MP0032.18 - MARINE PRODUCTS.

We reserve the right to make any changes we deem necessary to improve the quality of the product, even without prior consent or notification in the technical field leading to the improvement of the articles’ quality, as well as changes of design, model and color.

While stocks last. Illustrations may be example illustrations that may differ in appearance from the goods supplied. Errors excepted. We shall not be liable for any printing errors or misprints. Our general terms and conditions apply.

WÜRTH SHOPS

Malta Shop Würth Centre, Mdina Road Zebbug, ZBG 9016 Tel: (+356) 2149 4604 Gozo Shop COR 951 Pjazza President JF Kennedy, Victoria, VCT 2580 Tel: (+356) 2155 6105

CUSTOMER CARE

Address all product enquiries sales@wuerth.com.mt

T: +356 2149 4604