Cable Systems and Accessories

CABLE SYSTEM AND ACCESSORIES

C-Mounting Rails & Brackets

Stainless Steel A4 C-Mounting Hot-dip galvanized System & Accessories C-Mounting Rails & Accessories

Mounting & Connector Components

Pipe Clamps

Cable Mounting System

WIRE CABLE HOLDER New self-locking wire cable holder for quick installation without tools.

• Can be adjusted without tools •M ax. load-bearing capacity of 35 kg for 1.5-mm wire, 60 kg for 2-mm wire, 70 kg for 2.5-mm wire, 115 kg for 3-mm wire •H older for wire cables measuring 1.5 or 2 or 2.5 mm in diameter, art. no. 5255 000 501, PU/pcs. 30 •H older for wire cables measuring 2.5 or 3 mm diameter, art. no. 5255 000 502, PU/pcs. 30

Applications:

2

Cable trays

Air-conditioning cassettes

Suspension of spiral ducting

Lights

Mounting rails with pipes

Single pipe

CABLE SYSTEM AND ACCESSORIES

WIRE CABLE ON ROLLERS In different lengths and diameters.

Length Cable Ø Art. no. m mm 50 150 50 150 100

1.5 1.5 2.5 2.5 3.0

5255 000 510 5255 000 512 5255 000 520 5255 000 522 5255 000 525

PU/ m 50 150 50 150 100

Application areas: Heating, ventilation and air conditioning, piping, cable support systems, lighting, ­speakers, safety hanging sets, cable over­ loading, insulating panels for cold rooms, signage, decoration, suspended ceilings, transport conveyor belts, stays.

3

CABLE SYSTEM AND ACCESSORIES

UNIVERSAL PIPE CLAMPS Time-saving wire-cable clamp for piping and spiral ducting.

Can be installed without tools. No loss of screws.

Made from one piece without a soldering point.

• Double connection thread M8/M10 • Temperature resistant from –40°C to +110°C • Optimum vibration damping (in accordance with DIN 4109) • Simplified storage • Fewer waste products • Simplified project planning For spiral ducts measuring of 17 to 89 mm in diameter Art. no. 5255 000 550, PU/pcs. 10 • R eplaces more than 11 traditional pipe clamp sizes in pipeline construction • With noise decoupling and insulating hose For spiral ducts measuring up to 355 mm in diameter with a cable length of 1.5 m Art. no. 5255 000 555, PU/pcs. 10 • Replaces more than 21 ventilation clamp sizes For spiral ducts measuring up to 710 mm in diameter with a cable length of 2.5 m Art. no. 5255 000 560, PU/pcs. 10 • Replaces more than 21 ventilation clamp sizes

4

CABLE SYSTEM AND ACCESSORIES

Up to six times faster to use than traditional pipe clamps

AIR DUCT BRACKET

5

AIR DUCT HOLDER

• No guide rails or fastening elements required • Ready to use • Optimum vibration damping • Fast adjustment • Suitable for all ventilation ducts with a thickness of 0.6 to 1.5 mm • 3 mounting points • Air tightness class C

• No guide rails or fastening elements required • Ready to use • Optimum vibration damping • Fast adjustment • Suitable for all ventilation ducts with a thickness of 0.6 to 1.5 mm • 4 mounting points • Air tightness class C

Art. no. 5255 000 535 PU/pcs. 8

Art. no. 5255 000 540 PU/pcs. 8

CABLE SYSTEM AND ACCESSORIES

WIRE CABLE ENDING WITH TRAPEZOIDAL PLATE HOOK – C2C For simplified installation and calibration. No preparation necessary.

• Cross-section 7 x 7, wire cable diameter 2 mm • Increased vibration protection in comparison to threaded rod • Can be installed at an angle without mounting rails Ventilation, air conditioning and heating applications, pipelines, cable-support systems, loudspeakers, safety suspensions, cable overvoltage, isolation panels for cold rooms, signage, decoration, suspended ceilings, conveyor systems, stays, solar panels/photo­ voltaic systems.

Length of wire cable ends (L) Hook diameter 2 (ØD) Height (H) Permissible load Material Wire cable diameter Surface

6

CABLE SYSTEM AND ACCESSORIES

60 mm 5 mm 24 mm 550 N Steel 2 mm Zinc plated

Wire cable length

Product weight (per item)

Art. no.

PU/ Pack

1m 3m 5m

31.9 g 64.2 g 98.9 g

5255 000 601 5255 000 603 5255 000 605

10 10 10

WIRE CABLE ENDING WITH MALE THREAD M8 – C2C For simplified installation and calibration. No preparation necessary.

• Cross-section 7 x 7, wire cable diameter 2 mm • Increased vibration protection in comparison to threaded rod • Can be installed at an angle without mounting rails Ventilation, air conditioning and heating applications, pipelines, cable-support systems, loudspeakers, safety suspensions, cable overvoltage, isolation panels for cold rooms, signage, decoration, suspended ceilings, conveyor systems, stays, solar panels/photo­ voltaic systems.

Length of wire cable ends (L) Permissible load Material Length (LG) Connection thread (AG) Wire cable diameter Surface

7

CABLE SYSTEM AND ACCESSORIES

70 mm 550 N Steel 45 mm M8 2 mm Zinc plated

Wire cable length

Product weight (per item)

Art. no.

PU/ Pack

1m 3m 5m

39.8 g 71.5 g 105.2 g

5255 000 611 5255 000 613 5255 000 615

10 10 10

WIRE CABLE ENDING WITH HOOK – C2C For simplified installation and calibration. No preparation necessary.

• Cross-section 7 x 7, wire cable diameter 2 mm • Increased vibration protection in comparison to threaded rod • Can be installed at an angle without mounting rails Ventilation, air conditioning and heating applications, pipelines, cable-support systems, loudspeakers, safety suspensions, cable overvoltage, isolation panels for cold rooms, signage, decoration, suspended ceilings, conveyor systems, stays, solar panels/photo­ voltaic systems.

Length of wire cable ends (L) Hook diameter 2 (ØD) Hook diameter (ØDi) Permissible load Material Wire cable diameter Surface

8

CABLE SYSTEM AND ACCESSORIES

75 mm 6.3 mm 8 mm 550 N Steel 2 mm Zinc plated

Wire cable length

Product weight (per item)

Art. no.

PU/ Pack

1m 3m 5m

46.8 g 77.5 g 112.3 g

5255 000 621 5255 000 623 5255 000 625

10 10 10

WIRE CABLE ENDING WITH 90° EYELET – C2C For simplified installation and calibration. No preparation necessary.

• Cross-section 7 x 7, wire cable diameter 2 mm • Increased vibration protection in comparison to threaded rod • Can be installed at an angle without mounting rails Ventilation, air-conditioning and heating applications, pipelines, cable-support systems, lighting, loudspeakers, safety suspensions, cable overvoltage, isolation panels for cold rooms, signage, decoration, suspended ceilings, conveyor systems, stays, solar panels/ photovoltaic systems.

Length of wire cable ends (L) Width (B) Height (H) Material thickness (t) Eyelet diameter (ØDi) Permissible load Material

38 mm 12 mm 25 mm 3 mm 7.5 mm 550 N Steel

Wire cable diameter

2 mm

Surface

Zinc plated

9

CABLE SYSTEM AND ACCESSORIES

Wire cable length

Product weight (per item)

Art. no.

PU/ Pack

1m 3m 5m

33.0 g 66.2 g 95.0 g

5255 000 631 5255 000 633 5255 000 635

10 10 10

WIRE CABLE ENDING WITH LOOP – C2C For simplified installation and calibration. No preparation necessary.

• Cross-section 7 x 7, wire cable diameter 2 mm • Increased vibration protection in comparison to threaded rod • Can be installed at an angle without mounting rails Ventilation, air conditioning and heating applications, pipelines, cable-support systems, loudspeakers, safety suspensions, cable overvoltage, isolation panels for cold rooms, signage, decoration, suspended ceilings, conveyor systems, stays, solar panels/photo­ voltaic systems.

Permissible load Material Wire cable diameter

10

CABLE SYSTEM AND ACCESSORIES

600 N Steel 2 mm

Length of wire cable ends (L)

Product weight (per item)

Art. no.

PU/ Pack

1000 mm 3000 mm 5000 mm

2.6 g 5.7 g 9.1 g

5255 000 571 5255 000 573 5255 000 575

10 10 10

SUSPENSION SYSTEM With hook/connection hook.

For suspending cable support systems, strip lighting and lights.

• Available in different lengths • Fewer mounting holes required • Faster installation and cable laying

There are two versions with hooks available. The version with a connection hook is required for large cable trays.

Designation Suspension system With 2 hooks Suspension system with 2 connection hooks

11

Loop mm

Art. no.

PU/ m

150 300 500 150 300 500

5255 000 581 5255 000 583 5255 000 585 5255 000 591 5255 000 593 5255 000 595

10 10 10 10 10 10

CABLE SYSTEM AND ACCESSORIES

CABLE SYSTEM AND ACCESSORIES Würth Limited Würth Centre Mdina Road Zebbug, ZBG9016 Malta Tel. +356 2149 4604 eshop.wuerth.com.mt sales@wuerth.com.mt

© by Würth Limited All rights reserved.

Editor: Marketing Department - Würth MT

Our general terms and conditions of sale, delivery and payment apply. They can be found at eshop.wuerth.com.mt Reprint only with prior permission MP046.21 We reserve the right to make any changes we deem necessary to improve the quality of a product, even without prior announcement or notification. Illustrations include sample illustrations and may differ in appearance from the actual goods delivered. Errors excepted. We do not accept any liability for printing errors.