Skip to main content

WorkBoat December 2026

Page 1

Towboats • Transmissions • Great Loop ®

IN BUSINESS ON THE COASTAL AND INLAND WATERS

NEWS

STORIES

2026

DECEMBER 2026


YOUR VESSEL DOESN’T NEED A CREW

BECAUSE OURS HAS YOU COVERED

When it comes to the future of marine innovation, Twin Disc offers more than just products— we deliver solutions backed by a century of marine expertise. From propulsion systems to advanced controls, our team leverages industry experience and technologies to support your vessel applications. Whether you need precision maneuverability, reliability in harsh conditions or seamless integration for your autonomous or uncrewed vessels, Twin Disc is built to perform—today and for the next generation of marine operations. CONTACT TWIN DISC TODAY TO DISCUSS YOUR NEXT AUTONOMOUS OR UNCREWED VESSEL PROJECT. LET US HELP YOU ACHIEVE NEXT-GENERATION PERFORMANCE AT SEA. TWINDISC.COM Disclaimer: Twin Disc supplies marine propulsion systems, controls, and related components only. Twin Disc does not provide complete autonomous or uncrewed vessels, nor does it guarantee autonomous operation that may be outside Twin Disc’s control.

POWER. PRECISION. PERFORMANCE.


Content

December 2026 VOLUME 83, NO. 12

FEATURES 24 Cover Story: Top 10 Stories

The top 10 workboat industry storylines of 2026.

46 Vessel Report: Towboats

Owners and builders are finding ways to meet demand.

60 Focus: The Great Loop

Cancer survivor raises money for a great cause.

68 Focus: Fireboats

72

A 90-year-old vessel enters its next chapter.

72 In Business: Stasinos Marine How two brothers grew their tugboat business.

78 In Business: North River Boats A business strategy shaped by survival.

82 In Business: DeAngelo Marine Exhaust After four decades, company leadership plots the next phase.

88 IWBS Listings International WorkBoat Show preview and exhibitor listings.

BOATS & GEAR 12 On the Ways Retrofitted CTV serves as autonomy testbed • High-power tugs to help Boston Towing guide larger ships • Matson christens first of three new box ships • Hybrid ferry christened in Louisiana • Ship-assist tug delivered to Crowley • All American launches Alaska tour boat • Rozema to build pilot boat for Tampa • Georgia orders ferry from Derecktor • SAFE Boats awarded 28-boat contract.

52 Full Charge A closer look at Caterpillar’s new marine battery system.

56 Gearing Up Marine transmissions evolve to support modern vessels.

AT A GLANCE 4 On the Water: No-wake zones. 4 Credentialing Insight: When do you need a drug test? 6 Health, Safety, and Environment: Performance evaluations. 8 All Hands: Workforce must keep up with technology. 8 Inland Insider: A leg up for former prisoners. 10 Legal Talk: Limitation of liability and the small passenger vessel exception. www.workboat.com • DECEMBER 2026 • WorkBoat

52 DEPARTMENTS 2 Editor’s Watch 97 Port of Call 104 Advertisers Index ON THE COVER

Doug Stewart / WorkBoat archive photos.

1


EDITOR'S WATCH

Year of Mixed Signals

Eric Haun, Executive Editor ehaun@divcom.com

T

he Trump administration’s long-awaited Maritime Action Plan was released Feb. 13 to widespread industry applause. Fifteen days later, U.S. and Israeli strikes on Iran began, and the year took a turn few could have foreseen. Tanker traffic through Hormuz was choked off, and oil climbed from about $65 a barrel to nearly $120 at its peak. In March, the administration issued a Jones Act waiver that would become the longest in the law’s history. Issued to rein in surging fuel prices, the waiver was meant to last 60 days. It has been extended twice, and the latest version was set to expire Nov. 15. The record is mixed. Gulf Coast to West Coast shipments rose fourfold in the spring, which supporters cite as evidence it worked, yet pump prices climbed anyway. U.S.-flag vessels were available for most waiver voyages, and domestic operators say the uncertainty has dampened newbuild orders.

How much have the waivers hurt investment in the domestic maritime industry? It’s hard to say, because capital is still pouring in behind the push to revitalize the nation’s maritime sector and naval industrial base. Hanwha bought Philly Shipyard in late 2024, before the Korea trade deal, and has kept adding money as that deal strengthened the case for U.S. yards. Saronic is putting more than $3 billion of its own capital into Brownsville, Texas, and the Navy has since awarded it production work. HII and Austal are farming out hull modules to regional yards to build ships in parallel. Marad’s reactor initiative gave nuclear a path it didn’t have a year ago. Investors are reading federal intent and acting on it. On the legislative side, momentum has stalled. The House passed the shipbuilding provisions as part of the National Defense Authorization Act. Senate Democrats blocked the bill in July, largely over the Iran war, and Section 219, the Israel defensecooperation language, has become a second flashpoint. The maritime provisions have bipartisan support but are riding on a bill that has yet to move. All of these stories and more are covered in our Top 10 Stories of 2026, which starts on page 24. It’s been an action-packed year, and most of the storylines are still unfolding. The WorkBoat team will continue to follow them, so stay tuned. If you’ll be in New Orleans for the International WorkBoat Show, Dec. 2-4, find me on the floor. I’d like to hear where you think these stories go next.

EXECUTIVE EDITOR: Eric Haun / ehaun@divcom.com SENIOR EDITOR: Frank McCormack / fmccormack@divcom.com SENIOR ASSOCIATE EDITORS: Ben Hayden / bhayden@divcom.com Steve Mosco / smosco@divcom.com Kirk Moore / kmoore@divcom.com CONTENT PROJECT MANAGER: Carley Milligan / cmilligan@divcom.com CONTRIBUTING WRITERS: Tim Akpinar • Capt. Alan Bernstein Stephen Blakely • Dan Bookham Denielle Christensen • Capt. Eric Colby Jerry Fraser • Nate Gilman Pamela Glass • Capt. Arnie Hammerman Ken Hocke • Joel Milton • Peter Ong Richard Paine Jr. • Chris Richmond DIGITAL & PRINT PROJECT MANAGER: Doug Stewart / dstewart@divcom.com ADVERTISING ACCOUNT EXECUTIVES: Kristin Luke / kluke@divcom.com Jordan Randall / jrandall@divcom.com Krista Randall / krandall@divcom.com Danielle Walters / dwalters@divcom.com PRODUCTION & ADVERTISING PROJECT MANAGER: Wendy Jalbert / wjalbert@divcom.com Producers of the International WorkBoat Show and Pacific Marine Expo

Vice President: Wes Doane, wdoane@divcom.com Publishing offices: 2 Portland Sq., Suite 200, Portland, ME 04101 Tel 207-842-5608 | Fax 207-842-5609 Subscriptions: cs@e-circ.net / 978-671-0444 Mon–Fri, 10 a.m.–4 p.m. ET

WORKBOAT® (ISSN 0043-8014)

is published monthly by Diversified Communications Two Portland Square, Suite 200, Portland, ME 04101

Annual Subscription Rates: U.S. $39; Canada $55; International $103. 3 When available, extra copies of current issue are $5. For subscription customer service call (978) 671-0444. The publisher reserves the right to sell subscriptions to those who have purchasing power in the industry this publication serves. Periodicals postage paid at Portland, ME. Circulation Office: Two Portland Square, Suite 200, Portland, ME 04101. From time to time, we make your name and address available to other companies whose products and services may interest you. If you prefer not to receive such mailings, please send a copy of your mailing label to: Printed in USA

2

WorkBoat’s Mailing Preference Service, PO Box 7437, Portland, ME 04112 POSTMASTER: Send address changes to WORKBOAT, P.O. Box 1792, Lowell, MA 01853.

Copyright 2026 by Diversified Communications

© Diversified 2026 | Printed in the U.S.A. To update your WorkBoat account, change your address, or manage your subscription, visit WorkBoat.com.

www.workboat.com • DECEMBER 2026 • WorkBoat


THE ENGINE DIDN’T CHANGE.

THE VISIBILITY DID. SEE IT LIVE

RPM, oil pressure, coolant and exhaust temps, boost, fuel burn and more in real time.

PLAN AHEAD

Automated health and utilization reports, benchmarked, to keep maintenance runs on schedule.

EXPERT BACKUP

Laborde specialists turn your engine data into maintenance recommendations.

M ITS U B I S H I & ST EY R E N G I N E S | L I V E LY N C D E M O | H A P PY H O U R S

BOOTH #2829


AT-A-GLANCE

On the Water Local no-wake zones apply to commercial vessels, too BY JOEL MILTON Joel Milton works on towing vessels. He can be reached at joelmilton@yahoo.com.

O

n Oct. 14, the Coast Guard issued Marine Safety Alert 16-26 titled “Inland Navigation Rules and Local Laws: Understanding Conflict Preemption” after investigating a casualty in which a recreational vessel was swamped and capsized by the wake of a commercial towing vessel. No specifics about this incident are included, but it states that both the inspected towing vessel’s master and the operating company believed that local no-wake zones and other rules did not apply to them. The legal issue at hand is whether the federal Inland Navigation Rules automatically preempt any and all navigation safety laws or rules enacted by states, counties, towns, or other local jurisdictions. The Coast Guard contends that the

Credentialing Insight When do you need a drug test? BY NATE GILMAN

Nate Gilman, president of MM-SEAS USCG Licensing Software, uses his hawsepiping experience to support mariners and workforce development.

E

veryone knows you need drug test documentation to get a Merchant Mariner Credential and to renew it. Most also know that if you are only adding standards of training, certification, and watchkeeping endorsements, you do not need to submit drug testing paperwork with the application. Where people get hung up is upgrading. Some upgrades need a drug test, some do not, and it all depends on whether the Coast Guard considers what you are asking for a raise of grade or an increase in scope. A raise of grade needs a drug test and pays the higher evaluation fee. An increase in scope, which the Coast Guard also calls a modification or removal of limitation, needs no drug test and pays the lower fee. The good news is you do not have to guess. Go to the National Maritime Center fees page at https://www.dco.uscg. mil/nmc/fees/ and click on “Definitions” followed by “RIG vs Modification Fee Tables.” Find the credential you hold across the top, find the credential you are applying for down the side, and read the letter in the box. R means raise of grade, so a drug test is required. I means increase in scope, so no drug test is needed. That table is how the NMC makes

4

states, territories, and local authorities “maintain concurrent jurisdiction to enact and enforce localized safety ordinances. These rules are fully applicable to all vessels, including USCG-inspected commercial vessels operated by credentialed mariners, and are preempted only when compliance with both state and federal mandates is physically impossible.” So there’s your answer. For working mariners, it’s simple: you are generally fully responsible for the wake and other hydrological effects caused by your vessel as it moves through the water, so plan and behave accordingly. There may be rare exceptions, but none you can depend on to defend against negligent or grossly negligent operation. And that’s exactly what you’ll be charged with, at a minimum, if you blow through a posted no-wake zone and cause damage to people or property. The Coast Guard’s message to mariners and companies is clear. First, do not assume automatic federal preemption. Second, proactively research local regulations. Third, integrate local laws into your towing safety management system. Fourth, comply with local navigation safety rules. And last, immediately seek administrative guidance from the local USCG District Prevention Office when necessary. the call, so checking it is how you know for sure. The clear raises of grade are the steps up through the unlimited licenses. Third Mate to Second Mate is an R. Third Assistant Engineer to Second Assistant Engineer is an R. Drug test, higher fee, no surprise there. What surprises people is how many upgrades are an increase in scope (I) and do not require drug test documentation. Adding oceans to a near-coastal license is an I. So is adding near coastal to an inland license, or adding Great Lakes or Western Rivers. Adding Mate Pilot of Towing to a Master 200 GRT or a 500 GRT Mate is an I. Going from Master 100 GRT to Master 200 GRT is an I. On the engine side, a horsepower increase is an I, and so is adding steam, motor, or gas to a propulsion mode you already hold. The same is true across most of the ratings. Moving between AB endorsements, say AB Special to AB Limited to AB Unlimited, is an I. Adding Lifeboatman to an AB or QMED is an I. Moving between QMED endorsements is an I. Tankerman Assistant to Tankerman PIC is an I. Tank Barge PIC to Tank Vessel PIC is an I. Adding DL or LG to a tankerman endorsement is an I. None of those need a drug test. If you do land on an R, you have three ways to meet the requirement. The most common for professional mariners is a letter on your employer’s letterhead stating you have been in a random testing program for at least 60 of the last 185 days with no failed or refused test. You can also take a DOT five-panel drug test within 185 days of the day you submit, with the result signed by the Medical Review Officer. Or you can use a letter on your employer’s letterhead stating they hold evidence of a passed preemployment test within the last 185 days. A letter from a union does not count. www.workboat.com • DECEMBER 2026 • WorkBoat


GRIDCOOLER® KEEL COOLER

BUILT SMARTER TO WORK HARDER

WorkBoat Show

Booth #3229

BUILT TO TAKE IT ON

1.906.863.5553 | fernstrum.com/wb

The management system governing the manufacture of this product is ISO: 9001:2015 certified. © 2026 R.W. Fernstrum & Company. All rights reserved. FERNSTRUM® and GRIDCOOLER® are registered trademarks of R.W. Fernstrum & Company. All other trademarks cited are the property of their respective owners.


AT-A-GLANCE

Health, Safety, and Environment Maximize your evaluations BY RICHARD PAINE JR. Richard Paine Jr. is a licensed mariner and certified maritime safety auditor with more than 25 years of experience. He can be reached at rjpainejr@gmail.com.

O

ne of the most underrated ways to keep operations safe is also one of the simplest: the performance evaluation. Used well, it strengthens your safety culture and improves efficiency. Treated as a checkbox exercise, it delivers none of the benefits that vessel crews, operations teams, and senior management should be getting. Four areas deserve attention: Set expectations. Employees can’t meet a standard they haven’t been shown. Communicate it through your safety management system (SMS), employee handbook, onboarding, and training sessions, and make clear that everyone is expected to meet it and support the company’s safety and operating goals. Clear expectations also make evaluations feel fair rather than arbitrary. Be consistent. Build a routine. Employees should know how often reviews occur, who conducts them, and how both

6

positive and negative results affect their job status. Use a scoring system that applies easily to every review, such as 1-10, Poor-to-Excellent, or Satisfactory/Unsatisfactory. A repeatable process keeps reviews fair and comparable across crews and departments. Provide feedback. Few things damage culture more than employees not knowing what was said about them and having no chance to discuss it. That breeds animosity and distrust, and employees stop supporting the process. Treat reviews as two-way conversations, not verdicts handed down. Share results. You don’t need to disclose individual reviews, but share the general findings. Employees and management want to know what is working and where improvement is needed. Use those insights to set future goals and tie them to training programs. Sharing results builds trust and shows the process leads somewhere. Bonus: Include part-time employees. Don’t leave parttime or seasonal staff out. Their work affects safety and operations just as much as full-time staff. If finding a dedicated supervisor is difficult, consider alternatives, such as having more than one person review their performance. Ultimately, the goal is an honest assessment of your employees and your company’s performance. Don’t limit yourself. Determine what makes sense for your operation and put it in place. The results will speak for themselves.

www.workboat.com • DECEMBER 2026 • WorkBoat


NEW PATHFINDER ECS ENHANCED SAFETY

SIMPLIFIED INSTALLATION

COST EFFICIENT

SIMPLIFIED INSTALLATION, ROBUST RELIABILITY. Pathfinder ECS (Electronic Chart System) is a commercial electronic charting system based on type approved Pathfinder ECDIS. Pathfinder ECS puts professional mariners in command of their navigation system built around safety, security, and situational awareness.

COME VISIT US!

BOOTH 1943 Co-Located with:

raymarine.com


AT-A-GLANCE

All Hands Keeping up with technology BY DENIELLE CHRISTENSEN Denielle Christensen is founder, executive director, and CEO of WaveWorks Alliance, a nonprofit dedicated to expanding access to ocean economy careers.

A

utonomous vessel platforms are entering the market rapidly, and more uncrewed systems are operating on the water. The people running them come from two directions: mariners moving into autonomy and tech hires who have never stood watch. Employers need both. The challenge is that training for these roles has not kept pace with the technology. Until now, there has been no common reference point for the foundational skills and competencies needed to support these positions. To help address that challenge, we recently released the Autonomous Vessel Operator & Technician Skills Framework, developed and vetted with industry employers, operators, and subject-matter experts. The framework identifies the foundational knowledge and skills needed for entry-level operators and technicians while providing educators and training providers with a clearer understanding of what employers are looking for.

Inland Insider A leg up for former prisoners BY PAMELA GLASS Pamela Glass is WorkBoat’s Washington, D.C., correspondent.

M

aritime leaders are working with Congress to streamline the process of obtaining a Transportation Worker Identification Credential (TWIC), which is required for workers who need unescorted access to secure areas of maritime facilities, ports, and vessels, and for all credentialed merchant mariners. The TWIC Efficiency (TWICE) Act would open a new pathway into the industry by helping people nearing the end of incarceration at federal, state, and local prisons prepare their TWIC applications before release. The bill passed the House in September and awaits Senate approval. If signed into law, it would require the Transportation Security Administration to help these individuals prepare applications and navigate the appeals and waiver process. The bill would not change existing TWIC security requirements, including background checks and the list of disqualifying offenses. A felony does not automatically disqualify an applicant, and waivers can be sought for other convictions if proof of rehabilitation is provided. Reps. Troy Carter, D-La., and Clay Higgins, R-La., intro-

8

While this framework focuses on autonomous vessels, the process can be applied to any technology affecting the workforce. Employers are often the first to see change coming. New systems are deployed, and new jobs emerge. They are dealing with those changes long before they show up in a textbook or training program. A core missions of WaveWorks Alliance is to help bridge that gap. The process is straightforward: identify a workforce challenge, bring employers together to define the skills and knowledge needed, and translate that information into a format educators and training providers can use. We believe this approach can be replicated across many technologies. Whether the conversation is about AI, advanced manufacturing, cybersecurity, remote operations, alternative fuels, or another emerging technology, the challenge is often the same: employers see the workforce implications first, while educators and training providers are left trying to catch up. That is why we have launched industry work groups focused on workforce and technology trends affecting the industry. They give employers a place to share what they are seeing, identify emerging workforce needs, and help shape practical solutions that reflect operational reality. The commercial marine industry will continue to evolve. New technologies will emerge, jobs will change, and skill requirements will shift. Workforce development must keep pace. duced the bill, and Sen. John Kennedy, R-La., introduced the Senate version. Maritime groups including the American Waterways Operators (AWO) and the National Ocean Industries Association (NOIA) have endorsed it. Supporters argue that a faster process will help former prisoners re-enter society while easing workforce shortages in the maritime industry. Carter told a congressional hearing in June that many prisoners are training to be welders, pipefitters, electricians, and truck drivers but, once released, “they hit bureaucratic walls” that delay their TWICs. This often means missed opportunities for both workers and the employers eager to hire them, he said. Jennifer Carpenter, president and CEO of AWO, which represents the tugboat, towboat, and barge industry, said the legislation “sensibly helps address the labor needs of this essential industry by making the TWIC process more efficient for individuals who have earned second chances and are seeking fulfilling careers, while ensuring we continue to take necessary measures to safeguard our nation’s homeland security.” Erik Milito, NOIA’s president, added that the proposal “addresses one workforce bottleneck by creating a clearer pathway for eligible individuals to obtain the credentials needed to work in America’s maritime and offshore energy industries. At a time when our industry needs more skilled workers, this bipartisan legislation can help connect capable people with good-paying careers.” www.workboat.com • DECEMBER 2026 • WorkBoat


AT-A-GLANCE

Legal Talk Limitation of liability and the small passenger vessel exception BY TIM AKPINAR Tim Akpinar, based in Little Neck, N.Y., is a maritime attorney and former marine engineer. He can be reached at t.akpinar@verizon.net or 718-224-9824.

L

imitation of liability is one of the most controversial maritime laws out there. In a nutshell, it enables a shipowner to cap losses at the value of their vessel after an accident if it can be shown they were not in control of the underlying causes. The law originated with the best of intentions in the mid19th century to protect owners of clipper ships from losing everything if they were sued after a sinking. Since then, the law has been invoked in personal watercraft accidents and other settings that hold little connection to protecting commerce. But in recent years, legislators carved out something called a “small passenger exception.” That means some smaller vessels might not automatically enjoy the protection of limitation law. A recent case from the U.S. Court of Ap-

peals for the Fifth Circuit illustrates this. The case involved an agreement to provide a 38' aluminum workboat of less than 100 gt and a tug to a dredging contractor at $2,000 per day. In November 2024, the two vessels were performing dredging on the Alabama River near Monroeville, Ala. Somewhere south of the Highway 84 Bridge, the 38' vessel hit a steel pipe. Eight dredging company personnel aboard the 38-footer filed personal injury lawsuits against the owner and charterer of the vessels. In response, the vessel owner and charterer filed for limitation of liability but were denied limitation because the boat was a “covered small passenger vessel” under the law. Under 46 U.S.C. § 30502(b), a “covered small passenger vessel” is a vessel of less than 100 gt that carries more than six passengers, including at least one passenger for hire. The court ruled in favor of the dredge workers, seeing them as passengers and thus preventing the use of limitation law. These exceptions are relatively new, in part due to public outcry over the use of limitation law in the tragic 2019 fire aboard the dive boat Conception, which claimed 34 lives. The post-casualty value of the burned-out dive boat was essentially nothing, which was hurtful to the families of victims. This shows how maritime laws can be shaped by public opinion.

FIVE ICE BREAKERS DELIVERED IN 6 YEARS

Visit Us at Booth 2340

Marine propulsion solutions for commercial operations Built to withstand the toughest of operations while optimizing fuel efficiency, our innovative commercial marine propulsion solutions provide peace of mind to operators around the world. Visit us at booth #2401

BLOUNTBOATS.COM 401.245.8300 WARREN, RI INFO@BLOUNTBOATS.COM 10

www.workboat.com • DECEMBER 2026 • WorkBoat


Visit us at: Visit us at:

BOOTH 3401 BOOTH Co-Located3401 with: Co-Located with:

Courtesy of Courtesy of

LEGENDARY RELIABILITY. LEGENDARY RELIABILITY. WORLD-CLASS SUPPORT. WORLD-CLASS SUPPORT. yanmar.com/us/marinecommercial yanmar.com/us/marinecommercial yanmar.com/marine yanmar.com/marine vetus.com vetus.com


ON THE WAYS CONSTRUCTION ACTIVITY AT WORKBOAT YARDS

The Atlantic Endurance is the first Subchapter L vessel approved by the Coast Guard for autonomous operations.

W

hat to do with an out-of-work workboat? That was the question Charlie Donadio Jr., president and CEO of Atlantic Wind Transfers (AWT), was asking as shortterm charters were winding down for one of the company’s crew transfer vessels (CTV). Delivered in 2025, the 79'10"x28'2" Atlantic Endurance worked at Dominion Energy Inc.’s Coastal Virginia Offshore Wind and Equinor ASA’s Empire Wind, but its offshore wind prospects were limited amid the Trump administration’s efforts to dismantle projects along the East Coast. Fortunately, an interesting opportunity came along. Boston-based autonomous vessel company Blue Water Autonomy Inc. was looking for an operational commercial vessel to serve as a testbed for the self-governing systems it is developing. “We looked at vessels all throughout the world,” said Rylan Hamilton, the company’s CEO and co-founder. “[The Atlantic Endurance] is one of the most advanced vessels of this size that’s already out there. It can run at high speeds, and it’s highly maneuverable.” Hamilton also highlighted Donadio’s strong local ties and Rhode Island’s growing importance in marine technology innovation as advantages. “Because of the relationship that Charlie had with the Coast Guard, it was really quick to get Coast Guard ap12

Atlantic Wind Transfers

CTV serves as autonomy testbed

proval to operate in this body of water, where there’s a lot of other unmanned testing,” he said. “It was a great fit in a lot of different ways.” Donadio and AWT were the first to build a CTV in the U.S. with the Atlantic Pioneer, which entered service in 2016. Now the Atlantic Endurance is the first offshore service vessel approved by the U.S. Coast Guard for autonomous operations. Designed by Chartwell Marine Ltd. and built by St. Johns Ship Building Inc., Palatka, Fla., the aluminum catamaran has a 28-knot top speed and an 880-nm range at 22 knots. Its twin 1,450-hp MAN D2862 LE V12 diesels are EPA Tier 4-compliant with selective catalytic reduction from MAN and a Soundown silencer. The engines drive HamiltonJet HM651 waterjets through ZF 3050 marine gearboxes. HamiltonJet also supplied its AVX controls and JET Anchor positioning system, and Humphree interceptors help control motion. Two 32-kW Kohler generators supply ship’s power, distributed through an AC switchboard and shipwide control and monitoring system from Boat Electrics & Electronics. Beclawat windows and RG Seasight fendering round out the hull outfitting. Homeported at Quonset Point, North Kingstown, R.I., the boat is certified under 46 CFR Subchapter L (for offshore supply vessels) for ocean routes up to 150 miles from shore. It carries 24 passengers and a crew of four, with a www.workboat.com • DECEMBER 2026 • WorkBoat


ON THE WAYS 750-sq.-ft. cargo deck, a Palfinger crane, and 4,227 gals. of fuel. Safety gear includes Stat-X engine room fire suppression, A60 structural fire protection in the engine rooms, Revere SOLAS life rafts, McMurdo Smartfind EPIRB, and Mustang immersion suits for 27. Electronics include Furuno radars, a Simrad AP70 MK2 autopilot, a Teledyne Flir M364C thermal camera, a Luminell searchlight, and a 28-camera IP CCTV system, with Starlink and 5G LTE connectivity. The Atlantic Endurance was retrofitted with the autonomy technology at Blount Boats Inc., Warren, R.I. “The integration required significant structural, electrical, communications, navigation, and control-system modifications while maintaining compliance with applicable USCG requirements,” Donadio said, adding that the conversion was a team effort. Blount Boats project engineer Luther Blount organized and reviewed the drawings and technical documentation submitted to the Coast Guard and installed the structure Blue Water needed to secure its equipment. Andy Page, managing director at Chartwell, provided the naval architecture and engineered the structural additions and mounting arrangements for the infrared cameras, radars, Starlink antennas and other sensors on the vessel’s roof. Boat Electrics’ managing director, Simon Coleman, designed the electrical integration, including power supplies, distribution, and cable routing. Blue Water provided the autonomy stack itself: five infrared cameras, multiple radars, an inertial navigation system, and a full compute cluster. HamiltonJet’s JETlink interface module and supporting software for the AVX control system are the link enabling Blue Water’s AI-based software to command the vessel’s propulsion and steering with control safeguards in place. The wheelhouse retains three control stations. Even while operating in autonomous mode, a captain remains

at the helm and can take over full control of the vessel at any time. “[The vessel] has conducted autonomous operations throughout Rhode Island waters, including Narragansett Bay and offshore waters off the Rhode Island coast,” Donadio said. In real-world coastal and offshore conditions, he said, the boat has been used to “demonstrate and validate autonomous navigation, vessel control,

sensor integration, remote monitoring, and other advanced autonomous capabilities.” Hamilton said the testing is not funded by grants or by AWT. Blue Water Autonomy, founded in 2024, has financed development with private capital, including a $50 million Series A round led last year by Google Ventures. “They know a thing or two about autonomous vehicles and vessels,” he said.

Built For The Mission Proven Shipbuilding Solutions for Government Programs

www.workboat.com • DECEMBER 2026 • WorkBoat

LEARN MORE

BOOTH #2429 Co-Located with:

AMERICAN MADE. AMERICAN PROUD. 13


ON THE WAYS The company, which is also building larger autonomous vessels to Damen design at Conrad Shipyard’s facility in Morgan City, La., is competing for Navy programs. “The Navy is giving a really strong signal that there’s a lot of demand,” said Hamilton. Defense customers will likely adopt autonomy first, Hamilton said, but he expects the technology to reach com-

mercial workboats as costs fall. He doesn’t see crews being replaced on, say, a fishing boat. Instead, he compared it to driver-assist systems in cars, such as those that keep a vehicle from hitting the one ahead. “I think within the next five to 10 years you can see a lot of technology start trickling down” to the workboat community, he said. — Eric Haun

a subsidiary of BioMicrobics, Inc.

Longest Lasting, Best Performing MSD’s

PERIOD!

www.SciencoFAST.com solutions@sciencofast.com

Proudly made in the U.S.A.

BOOTH #2010

At All American Marine, we push the boundaries of vessel design and clean propulsion. Harbor Breeze Cruises’ new 108-foot El Escudo is a first-ofits-kind, 350-passenger parallel hybrid monohull, delivering zero-emissions harbor operation and full-range Tier 4 diesel capability offshore. Built for cleaner cruising. Engineered without compromise. Stop by our WorkBoat Booth #2010 or scan the code to learn more. 14

High-power tugs will help Boston Towing guide larger containerships

S

enesco Marine LLC, North Kingstown, R.I., has launched the Allegiance, a new tugboat for Boston Towing & Transportation (BTT), Boston. The 92'x40'x16'3" tractor tug is the first of two new Robert Allan Ltd.designed RApport 2800 tractor tugs being built by Senesco for BTT. The Allegiance is due for delivery in December, followed by the Resilience in 2027. BTT, which, like Senesco, is a division of Reinauer Transportation Co. LLC, Staten Island, N.Y., will operate the new vessels in Boston Harbor. The newbuilds will each have a draft of 17'10" and be powered by twin 3,500hp Tier 4 Caterpillar 3516E-HD diesels that will give the boats a running speed of 12.5 knots and a bollard pull of 93 tons ahead. The boats will feature Kongsberg US 255 FP Z-drive azimuth thrusters, each with a 2,800-mm fixed-pitch, nickel-aluminum-bronze propeller. Ship’s service power comes from three John Deere 4045AFM85 99-kW generator sets that meet Tier 3 standards. BTT ordered the new tugs in response to the growing number of larger containerships calling on Boston, a shift made possible by the port’s new container berth and the Boston Harbor deepening project. The newbuilds also represent a reinvestment in BTT’s existing fleet. Boston is a relatively shallow port where several vessel movements often must fit into the same tidal window. BTT already operates Z-drive tugs, but Capt. Christopher Smith, the company’s general manager, expects demand for high-capability boats to grow along with ship size. “Adding these high-horsepower vessels provides greater capability and flexibility while allowing BTT to continue modernizing the fleet to meet the changing demands of the port,” Smith said.

www.workboat.com • DECEMBER 2026 • WorkBoat


With a bollard pull of 93 tons ahead, the tractor tug Allegiance will help Boston Towing serve larger containerships that call on Boston Harbor.

On deck, the tugs will each have a Markey DEPCF-52 electric hawser winch rated 75 hp and a Markey CEP60 electric capstan rated at 10 hp, with about 25,000 lbs. of stall line pull. Tankage will include 30,870 gals. of fuel in a pair of day tanks and four storage tanks, 2,280 gals. potable water, and 2,490 gals. diesel exhaust fluid.

16

The ABS-classed tugs will each have accommodations for crews of four and two “spares.” BTT’s work covers a wide range. Smith said it’s not unusual for one tug to assist a 1,200', 150,000-dwt containership in the harbor and, later that day, help a low-freeboard tank barge through the confined waters of Chelsea Creek.

Boston Towing & Transportation Co.

ON THE WAYS The new tugs must deliver “substantial power without sacrificing maneuverability, versatility, or the precise vessel control required for smaller and more delicate operations,” Smith said. The RApport 2800’s compact, highpower design fits that mix of work. BTT’s tugs operate in narrow creeks, shallow rivers, strong currents, bays and sounds, and they also need to be ready to respond offshore. BTT has answered open-ocean ship emergencies and rescues before, and Smith said the new tugs retain that ability without giving up the maneuverability needed in tight quarters. “Rather than designing solely around horsepower or bollard pull, we focused on creating a versatile platform specifically suited to the unique and varied challenges of operating in and around Boston Harbor,” he said, emphasizing that the newbuild program has been a collaborative effort involving “[BTT project lead] Bill Skinner and me work-

www.workboat.com • DECEMBER 2026 • WorkBoat


Experience a Sea Change in workboat crew communications.

David Clark Marine Headset Systems Series 9100 Digital Crews on board tug and tow boats, fire/rescue craft, offshore service Communication System vessels, patrol boats and other workboats must perform a variety of Scalability • Versatility • Simplicity complex operations. Wind noise, loud engines and pounding through rough waters can make boat crew communication extremely challenging.

David Clark Marine Headset Systems offer clear communication and rugged reliability in the harshest marine environments, while enhancing the safety and situational awareness of boat crew members. Call 800-900-3434 (508-751-5800 Outside the USA) to arrange a system demo or visit www.davidclark.com for more information.

BOOTH 956 Co-Located with:

© 2026 David Clark Company Incorporated ® Green headset domes are a David Clark registered trademark.

W W W. D AV I D C L A R K . C O M


ON THE WAYS

BOATBUILDING BITTS

M

atson Inc., Honolulu, christened the first of three new containerships at Hanwha Philly Shipyard Inc., Philadelphia. The 850' Makua is scheduled for delivery in the first quarter of 2027, followed by sisterships Malama and Makena in the third quarter of 2027 and the second quarter of 2028. The 3,600-TEU ships, a roughly $1 billion investment, will be LNG-ready with dualfuel engines and a top speed of nearly 24 knots. They will replace three vessels now serving Matson’s Hawaii and China-Long Beach Express routes.

The Louisiana Department of Transportation and Development christened the Holly Beach, the first of two hybrid-electric ferries Thoma-Sea Marine Constructors, Houma, La., is building for the Cameron crossing in Cameron Parish. The 190'x50'x13' ferry carries 34 vehicles and was designed by Elliott Bay Design Group. Sistership Cameron was due in late November. Both USCG Subchapter H ferries use Siemens Energy Blue Drive Eco hybrid propulsion and Thrustmaster azimuthing thrusters. Crowley, Jacksonville, Fla., has accepted delivery of the 82' ship-assist tugboat Venture from Diversified Marine Inc., Portland, Ore. The Robert

11:14 AM

Propulsion Control, Telegraph, and Machinery Alarm & Monitoring AZIMUTH TELEGRAPH

BOOTH #3670

PUSHBUTTON TELEGRAPH

DCH

Matson

ing closely together, supported by the valuable input and contributions of our entire team.” The tugs will also have slipping clutches on the main shafts, allowing the crew to maneuver at reduced thrust in confined or sensitive areas without creating excessive propeller wash. That helps limit bottom disturbance, shoreline erosion, and damage to nearby structures. Because BTT runs both dayboats and vessels crewed around the clock, the new tugs were built with the accommodations, systems, and redundancy to support either schedule. “These vessels were designed around BTT’s actual operating environment and reflect decades of experience working throughout Boston Harbor and the surrounding waters,” Smith said. “The objective was to build vessels capable of meeting not only today’s requirements, but also the foreseeable operational demands they may encounter throughout 2014 Oct SNAME mt.pdf their service lives.” — E. Haun 1 07-09-14

FLEX FXAXAA00

COMMERCIAL RECREATIONAL

10G IMPACT MITIGATION

C

Y

CM

MY

Main Iron Works

M

MPC-FP IMACS

FP4 NEW! PXEXAB00

COMMERCIAL RECREATIONAL

CY

PCH

CMY

K

MCH SCH

FLEXpodHD podHD pod

6G IMPACT MITIGATION

PXFXAA00

COMMERCIAL RECREATIONAL

6G IMPACT MITIGATION A World Leader in Propulsion Controls

PRIME MOVER CONTROLS INC.

3600 GILMORE WAY, BURNABY B.C. CANADA V5G 4R8 TEL 604 433 4644 FAX 604 433 5570 www.pmc-controls.com

18

SHARKSEATING.COM www.workboat.com • DECEMBER 2026 • WorkBoat


ROSE USA SHIPYARD BOOTH 3721 Co-Located with:

⏹ FLOATING DOCK OPERATIONS ⏹ SHIP REPAIR & MAINTENANCE ⏹ NEWBUILDING & FABRICATION : - MR TANKERS, BUNKERING VESSELS - OFFSHORE MODULES, PACKAGES & STRUCTURES - SUBSEA STRUCTURES & PIPING WORKS

WORLD - CLASS HEAVY LIFT FLOATING DOCK SOLUTIONS

PRINCIPAL PARTICULARS LENGTH O.A. 230.0 m LENGTH B.P. 230.0 m BREADTH (MLD.) - OUTSIDE WALL 45.0 m - INSIDE WALL 38.0 m DEPTH (MLD.) - TOP DECK 16.2 m - SAFETY DECK 12.7 m - SUNKEN DECK 8.7 m PONTOON DECK 6.1 m MAX. SINKING DRAFT 13.2 m LIGHT DRAFT 2.0 m CAMBER 0.1 m

LIFTING CAPACITY

15,000 Tons

REMITITE OFFSHORE SHIPBUILDING & ENG

Tel.: +1-346-387-6161

E-mail: sales@remitite.com


See what purpose-built looks like at northriverboats.com or visit us at booth #3280

20

Chartwell Marine

Allan Ltd.-designed tug will work under charter at the ports of Los Angeles and Long Beach, Calif. Twin Caterpillar 3516 Tier 4 diesels produce more than 6,000 hp, and azimuth stern drives deliver 95 tons of bollard pull. All American Marine, Bellingham, Wash., launched the 84'6" aluminum catamaran North Star for Phillips Cruises & Tours. Designed by Teknicraft Design, the hydrofoil-assisted vessel can carry 150 passengers under Subchapter T. It will run nature tours from Whittier, Alaska. Four 800-hp Scania DI16 engines drive four MJP 350X waterjets. Rozema Boat Works, Mount Vernon, Wash., has been awarded a contract to build an aluminum pilot transfer vessel for the Tampa Bay (Fla.) Pilots Association. The 57'x17'5" double-chine boat was designed by Camarc Design, Dunoon, U.K., and will carry up to five pilots plus crew. Twin Caterpillar C18 diesels, each rated at 715 hp, will drive conventional propellers through Twin Disc MGX-5136 gears for an expected top speed of 27 to 28 knots. Derecktor Shipyards, Mamaroneck, N.Y., will build a 70' catamaran ferry for the Georgia Department of Natural Resources. The 150-passenger boat will serve Sapelo Island, running between Meridian Dock on the mainland and Marsh Landing Dock on the island. Construction at Derecktor’s Dania Beach, Fla., yard is scheduled to begin before year’s end. The ferry was designed by Chartwell Marine, Southampton, U.K., and will become the island’s primary vessel, with the existing state-operated ferry kept as a reserve. SAFE Boats International, Bremerton, Wash., has been awarded a five-year blanket purchase agreement worth up to $36.4 million to supply patrol boats for U.S. Southern Command foreign military sales programs. The agreement covers up to 28 SAFE 3810 Full Cabin Outboard patrol boats, plus spares, training, and field service support. Production starts in 2027. The first boats go to the Dominican Republic, Dominica, St. Kitts and Nevis, and Suriname for coastal patrol, law enforcement, and counternarcotics work.

Crowley

BOATBUILDING BITTS

www.workboat.com • DECEMBER 2026 • WorkBoat


Proudly Serving The Commercial Marine Sector since 1952. Best in Class Products. Imtra curates an exclusive line of best-in-class products from innovative global leaders known for the highest quality and performance. Discover the difference in our family of brands.

Expert Knowledge. Imtra’s team of experienced marine industry professionals is here to help you find the ideal solution for your unique needs. Our product experts are invested in your success.

LIGHTING

Unparalleled Support.

TRIM CONTROL

Imtra is a 100% Employee-Owned company committed to providing the kind of customer focused service and support that will win your loyalty for a lifetime.

WIPERS IMTRA’S FAMILY OF BRANDS:

Find Your Ideal Solution at Imtra.com or Call 508-995-7000


VISIT US AT THE WORKBOAT SHOW

Bringing the Best to Commercial Marine

THRUSTERS

BOOTH # 1115

SEATING

DOORS & HATCHES

INSULATION

SOLAR SHADES

BE SURE TO VISIT THE IMTRA ONLINE LEARNING CENTER FOR HELPFUL INFORMATION, ARTICLES AND VIDEOS


TOP NEWS STORIES OF 2026

TOP TEN NEWS STORIES OF 2026

1 U

YEAR OF THE WAIVER

.S. and Israeli airstrikes on Iran began Feb. 28, launching a regional conflict that almost immediately disrupted shipping routes through the Strait of Hormuz and, as a result, the flow of energy products and other goods to destinations around the world. Tanker traffic in the Strait of Hormuz, which before the war handled about 20% of global oil shipments daily, came to a halt. The price of oil jumped from around $65 a barrel in February to more than $110 in March. The Trump administration, through the Department of Homeland Security, responded by announcing a 60-day waiver of the Jones Act on March 17. Crude oil briefly dropped back near pre-war prices in June but rose back

24

to more than $104 per barrel in late October. Short-term Jones Act waivers are not unheard of, particularly after natural disasters such as major hurricanes. The breadth and duration of the 2026 waiver, though, was unprecedented. The waiver announced in March covered 659 products, not just fuel or crude oil. “The reason the industry has been so up in arms over this waiver is because it is the longest and broadest Jones Act waiver that’s ever been issued,” said Jennifer Carpenter, president and CEO of the American Waterways Operators (AWO), a trade association for the towboat, tugboat, and barge sectors. “What is really new, unprecedented, historic about this waiver is it was just an opening of the barn door.” Carpenter, who also serves as president of American Maritime Partnership, a coalition of U.S. maritime interests, spoke with WorkBoat in late June, just over three months into the waiver.

At the time, the Trump administration had just announced an extension to its Jones Act waiver, through Aug. 16. Many in the maritime industry viewed the extended waiver as a head-scratcher move for an administration that on Feb. 13 had released its much-heralded Maritime Action Plan (MAP) only to undermine the domestic shipbuilding industry a month later. “The Jones Act waiver has thrown cold water on the enthusiasm of domestic operators to go out and spend money on new ships in U.S. yards,” Matt Woodruff, vice president of public and government affairs for Kirby Corp., Houston, and chairman of AWO, told WorkBoat in July. “To the extent that a goal of the MAP is to stimulate American shipbuilding, the Jones Act waiver is doing just the opposite.” Leading up to the waiver’s scheduled sunset of Aug. 16, more than 50 members of Congress signed a letter calling on the president to allow it to expire.

www.workboat.com • DECEMBER 2026 • WorkBoat


Nevertheless, the administration announced another 90-day extension. This time, though, it narrowed the waiver’s scope by requiring foreign-flag vessels to obtain waiver approval per voyage. Supporters of the waiver — as well as constituencies that favor scaling back the Jones Act or repealing it altogether — pointed to vessel movement data to make the case that the waiver was having its intended effect. “Data shows the waiver has driven a significant increase in domestic deliveries of essential products such as gasoline, diesel, and jet fuel,” Taylor Rogers, a White House spokeswoman, said in a post on X regarding the Aug. 16 waiver extension. Indeed, according to a report from the U.S. Energy Information Administration (EIA) released Aug. 17, tanker and barge shipments of crude oil and petroleum products from the Gulf Coast to the West Coast were up fourfold year-over-year in April and May. “From 2021 through February 2026 — the last full month before the Jones Act waiver — renewable diesel was the only product that moved by tanker and barge from the Gulf Coast to the West Coast in most months, making up 96% of waterborne shipments along that route,” EIA said in its report. “In April, the addition of substantial shipments of gasoline blending components, finished motor gasoline, jet fuel, and crude oil brought total shipments to 190,000 bbls. per day (b/d), up from less than 30,000 b/d in January and February.” Waiver opponents, though, have expressed concerns about whether the government is exercising the same regulatory oversight of foreign-flag vessels traveling between U.S. ports as it does the domestic fleet. There is also the issue of fuel prices, which are up sharply since the war in Iran began. According to the EIA, the average price of a gallon of on-highway diesel in the United States is up nearly 55% from a low point in January to late October. A gallon of regular gasoline is up even more — 65% from its January low point to late October. The current waiver, Carpenter says, “has not lowered fuel prices for Ameri-

U.S. Marine Corps

TOP NEWS STORIES OF 2026

A U.S. Marine aboard a merchant ship. The Iran war disrupted shipping through the Strait of Hormuz.

can consumers and has been used to increase oil traders’ margins, not meet military needs.” — Frank McCormack

2 I

MARITIME ACTION PLAN STUCK IN CONGRESS

n February, President Trump unveiled his Maritime Action Plan (MAP) to revive U.S. shipbuilding. Months later, key parts of the legislative package are stuck in Congress over unrelated political disputes about American military aid to Israel. How and whether the shipping provisions advance depend on the outcome of the November elections, control of Capitol Hill in 2027, and what a deeply divided lame-duck Congress can get done before the end of this year. The Trump administration’s MAP proposal lays out a comprehensive strategy to revive the U.S. shipbuilding industry and restore the nation’s maritime industrial capacity to meet national security and economic objectives. The strategy is organized around four pillars: rebuilding shipbuilding capacity and capabilities, reforming workforce education and training, protecting the maritime industrial base, and supporting national security and industrial resilience. It is strongly supported by the mari-

www.workboat.com • DECEMBER 2026 • WorkBoat

time industry and has broad bipartisan support in Washington. Because the plan is complex and falls within multiple committee jurisdictions in Congress, proponents in the House of Representatives successfully fast-tracked several key provisions by adding them to the must-pass annual Pentagon funding bill. The $1 trillion National Defense Authorization Act (NDAA) cleared the House in July, with the shipping provisions intact. Normally, the military funding legislation receives strong bipartisan support in Congress. But this time it barely squeaked through on a 216-214 vote, as both Republicans and Democrats split their votes. It has since stalled in the Senate, its fate uncertain. Although various parts of the bill are controversial, by far the biggest fight is over Sec. 219, which would effectively merge the U.S. and Israeli militaryindustrial complexes by directly linking the Israeli Defense Forces with U.S. military command structures, intelligence systems and supply chains, among other provisions. The proposal is strongly supported by Israel and its supporters in Congress. However, critics say Israeli military campaigns have harmed civilians in Gaza and Lebanon, and they oppose expansion of Israeli settlements in the Palestinian West Bank. 25


With the NDAA blocked before the elections, congressional staff and news reports suggest there are four likely paths if the MAP provisions are to advance. In the first, the Senate sends the NDAA bill to a joint House-Senate conference committee following the elections, where negotiators would hammer out final provisions that both chambers could quickly pass. The November election results are likely to strongly influence what that would look like and whether the Sec. 219 provisions remain. On the second path, Sec. 219’s Israel language is struck from the NDAA, and the rest of the bill is allowed to pass, including the MAP provisions. On the third, the MAP provisions are removed from the NDAA legislation and passed separately, possibly with significant changes, either as a stand-alone bill or attached to some other less controversial legislation. On the fourth, the MAP provisions are

The Department of War

TOP NEWS STORIES OF 2026

President Trump makes an announcement on American shipbuilding in Baltimore in October.

dropped as part of a larger compromise over the NDAA and re-introduced in the next Congress in 2027. Among the MAP-specific provisions added to the House-passed Pentagon funding bill, currently stalled in the Senate, is an overhaul of Title XI ship financing that would expand eligible uses, including for certain fishing ves-

R�p�o�t 2�0� Compact and Cost-effective Ship Handling Tug

sels. A new “Maritime Workforce and Education” section would authorize shipyard capital and training grants and a state maritime academy program. New cargo preference enforcement provisions are added, including a new preference regime for U.S. containerized and roll-on/roll-off cargo. A new Maritime Workforce section would also be created to implement relevant parts of the MAP, along with a Merchant Marine Career Retention Program and new ways to help military veterans transition into commercial mariner careers. The bill would further authorize a Maritime Security Trust Fund of up to $20 billion and would create a new “Ship America Office” within the Maritime Administration (Marad), with increased cargo preference funding. A “Shipbuilding Financial Incentives” grant program would have enhanced “Buy America” incentives, and Defense Production Act Title III authorities would be expanded. — Stephen Blakely

Design for the Future

Design for the Future.

Snow and Company is proud to build battery-powered electric ship-assist tugs among many more. As we tread toward a better future we seek like minded individuals to join our team.

SNOW & COMPANY, INC SEATTLE, WASHINGTON 206-953-7676 SNOWBOATBUILDING.COM

26

www.workboat.com • DECEMBER 2026 • WorkBoat


Join Cummins at Workboat 2026 The productivity of your marine operation largely depends on one factor: uptime. Cummins engines are durable by design. Built for longevity, our proven low maintenance requirements mean no midlife overhaul. And the longer your vessels stay on the water, the more they can power your operation. Trust in dependable power and expert support. Choose Cummins, don’t compromise.

Visit us in Booth 3001 ©2026 Cummins Inc.


TOP NEWS STORIES OF 2026

3 T

UNCREWED VESSELS GO FROM PROTOTYPE TO PRODUCTION

he U.S. Navy in March canceled the Modular Attack Surface Craft (MASC) program saying MASC’s commercial technology was mature enough to skip the prototyping phase. Thus, the Navy moved from experimental testing to operational integration and launched the Medium Unmanned Surface Vessel Family of Systems (MUSV FoS, so named because several competing designs are involved) program as part of the “Golden Fleet” plan. For 2026, the Navy awarded a $1.2 billion contract to procure 30 MUSVs: 10 hulls each from Saronic Technologies, HII (Huntington Ingalls Indus-

28

tries), and Galliano Marine Services/ Edison Chouest, at $40 million per hull. The MUSVs are designed to act as uncrewed “pickup trucks” for the fleet. They must have a range of 2,500 nautical miles at 25 knots in Sea State 4 (4' – 8' seas), carrying up to 25 metric tons of payload in two 40' containers on their cargo beds. At 25 knots, a MUSV can sail for four days and 23 hours continuously before running out of fuel. All 30 MUSVs are scheduled for delivery before September 2027. Saronic Technologies will build the longest MUSV design: 10 Marauder 180' aluminum hulls running Saronic native software. Each will have a payload of 150 tons, or four shipping containers. To meet Marauder construction demand, Saronic is building Port Alpha, a state-of-the-art, 835-acre mega-shipyard at the Port of Brownsville, Texas, with

$3 billion in private capital investment, a record for MUSV shipyard expansion. Saronic also invested $300 million to revamp and expand the former Gulf Craft shipyard in Franklin, La., adding 300,000 sq. ft. of manufacturing space. HII will build 10 aluminum hulls, each approximately 151' long, named Romulus and running the company’s Odyssey software capable of solo or swarm operations. Each will have a payload of 25 tons, or two shipping containers. HII is tapping local aluminum hull fabricators, such as Breaux Brothers, Loreauville, La., and Halimar, Morgan City, La., to distribute Romulus labor and supply chains and keep HII shipyards clear for construction of the Navy’s manned warships. Galliano Marine Services, part of the Edison Chouest Group, will build 10 steel-hulled MUSVs, each approximate-

www.workboat.com • DECEMBER 2026 • WorkBoat


ly 150' long and running Anduril AI software. They will have a payload rating of 25 tons, or two shipping containers. Little public information is available on their MUSV design, but the company makes offshore support, construction, and towing vessels with design layouts like the MUSV. While none of the MUSVs will carry built-in armaments, they can carry the Mark 41 Payload Delivery System, which consists of four vertical launch system (VLS) cells in a 40' shipping container and can fire Raytheon’s Standard surface-to-air missiles and Tomahawk land-attack cruise missiles. The VLS cells are raised into launch position through the container’s roof. The Navy also paid $10 million to Saildrone for its Surveyor, an uncrewed surface vessel (USV) with a 65' aluminum hull and a 42' carbon-fiber sail. It is essentially an autonomous 15-ton sailboat that runs on hybrid diesel and wind power and can sail for 100 days at 6 knots to map the ocean floor. Surveyor USVs can be armed with four AGM-179 joint air-to-ground missile launchers

30

Saronic Technologies

TOP NEWS STORIES OF 2026

A Saronic Marauder USV. Saronic will build 10 for the Navy.

located forward of the amidships sail. It carries the latest multibeam sonar for undersea mapping down to 36,000', supporting surface and undersea intelligence and anti-submarine warfare applications. BlackSea Technologies was acquired by Aevex Maritime Systems in September. “This [acquisition] supports a multidomain approach to a family of systems with another proven unmanned systems provider to the Department of War,” an

Aevex spokesperson told WorkBoat. “Aevex has delivered more than 325 small USVs to the U.S. Navy and accumulated 25,000-plus hours of on-water operations in support of the Navy’s unmanned operational objectives, far more than any competing platform.” However, in October the Navy halted future purchases of Aevex Aerospace’s 16' Global Autonomous Reconnaissance Craft, citing performance issues, hardware limitations, and cheaper alternative weapon options. The service had spent $136.8 million on 24 prototypes and 301 production units. In October, the Pentagon and the Defense Innovation Unit launched a 120day “SWAP-USV” Sprint competition to immediately buy and field combat-ready USVs outfitted with “hard-kill” counterair weapons and clutter-resilient sensors. Also in October, Red Cat Holdings unveiled its new Blue Ops maritime division, opening orders for productionready military USVs, such as the B-18 (an 18' tactical one-way attack drone) and the 39' B-39, to supply the Navy and global allies. — Peter Ong

www.workboat.com • DECEMBER 2026 • WorkBoat


W

NE

Workboat Engine MAN D3872 LE V12

Workboat Engine MAN D2862 LE V12

30L displacement available with SCR or DPF+SCR system

24L displacement available with SCR or DPF+SCR system

UNMATCHED & SUSTAINABLE POWER RANGE Reliable Power. Built for the Job.

Our marine engines deliver dependable performance across a wide horsepower range—perfect for tugs, crew boats, and work vessels of all kinds. Designed for tough conditions, they offer maximum uptime, fuel efficiency, and low emissions without sacrificing power. Sustainable. Durable. Ready when you are. For more details, explore www.manengines.com, www.man-engines.com, or www.performancediesel.com. *Golden Gate Pilot Boat powered by MAN D2862LE SCR engines.

West Coast Distributor

East Coast Distributor

BOOTH 2501 Co-Located with:


TOP NEWS STORIES OF 2026

4

NAVY SHIPBUILDERS TURN TO OUTSOURCING

Doug Stewart

N

avy shipbuilding is moving out of the big yards. On the Gulf Coast, HII’s Ingalls Shipbuilding and Austal USA are sending large structural units and hull modules to regional builders, keeping final assembly and integration for themselves. Gulf Copper, Eastern Shipbuilding and Master Boat Builders are among several smaller yards now fabricating pieces of destroyers, amphibious ships and salvage vessels, and the work is growing fast. Ingalls, Pascagoula, Miss., expanded its distributed shipbuilding program to the San Antonio-class amphibious transport docks (LPDs). Eight structural units for the future Philadelphia (LPD 32), the 16th ship in the class, have been awarded to two partner shipyards and are in early production. The move extends a strategy Ingalls already uses on its Arleigh Burke-class destroyer program. “By shifting selected structural units to trusted partners, just as we’ve successfully done in the Flight III destroyer program, we’re enabling more parallel construction and freeing our Ingalls team to focus on the complex assembly and integration work that only a major shipyard can perform,” said Brian Blanchette, Ingalls president. Ingalls began building its expanded partner network in 2023 with a qualification process that included technical capability assessments, workforce reviews and quality system verification, coordinated with the Navy’s Pascagoula-based Supervisor of Shipbuilding, Conversion and Repair, Gulf Coast. Partner yards are integrated into Ingalls’ quality and material control systems. The first test case was the Flight III destroyer Thad Cochran (DDG 135). Gulf Copper, Galveston, Texas, and Eastern Shipbuilding, Panama City, Fla., built three grand blocks that arrived ahead of the ship’s October 2025 keel authentication, allowing early-sequence construction to start sooner.

Cranes work around a hull module at Master Boat Builders in Coden, Ala.

The program has since grown. Five partner companies are fabricating 32 structural and pre-outfitted units for John F. Lehman (DDG 137) and 37 units for Telesforo Trinidad (DDG 139). The first two DDG 137 units arrived ahead of the ship’s July 1 fabrication start. “Early deliveries for DDG 137 units show the model is not only repeatable but scalable,” Blanchette said. HII doubled its distributed shipbuilding workload in 2025 and plans to increase outsourced hours another 30% this year, with amphibious ships making up a significant portion of the growth. The company has 40 ships under construction at Ingalls and Newport News (Va.) Shipbuilding. Austal USA, Mobile, Ala., is building its own network. In September 2025, it signed a memorandum of understanding with Master Boat Builders Inc., Coden, Ala., for a strategic outsourcing partnership. The agreement outlines a framework for distributing work across regional yards to reduce bottlenecks and create surge capacity. All work must meet Austal specifications and U.S. government standards, including quality assurance, cybersecurity and “buy American” requirements. In March, Master Boat signed its first production contract under the deal to fabricate two hull modules for the Navy’s Navajo-class towing, salvage and rescue ship (T-ATS)

D I G I TA L S H I P B U I L D E R S D E S I G N . B U I L D . C O N S U LT.

incatcrowther.com BOOTH 2408

32

www.workboat.com • DECEMBER 2026 • WorkBoat


TOP NEWS STORIES OF 2026 program. Master Boat will build the modules in Coden for transport 30 miles to Mobile for final assembly and outfitting. “This contract validates what we’ve been saying all along — regional shipyards like ours can take on complex defense work and deliver,” said Garrett Rice, Master Boat president. Gene Miller, interim president of Austal USA, said distributing module fabrication to a qualified Gulf Coast yard expands throughput, reduces schedule risk and strengthens the industrial base. The 263' Navajo-class ships will replace aging fleet ocean tugs and rescue and salvage ships. Austal has launched the first two. Master Boat, which employs more than 400 workers, is investing in its own capacity. It announced plans in December 2025 for a $60 million, 150,000-sq.-ft. manufacturing facility

Move Beyond Ordinary with the best custom portfolio of work boats.

on a 20-acre site across Bayou Coden from its existing yard. The project is expected to take 18 to 24 months and add about 200 jobs. It is designed for serial production of steel and aluminum vessels and modules for Navy and Coast Guard programs, including the Landing Craft Utility program and potentially the Coast Guard’s domestic icebreaker program. The yard also took delivery of a

155'x66' floating drydock from Conrad Shipyard, Morgan City, La. With a 2,000-ton lifting capacity, the dock lets Master Boat launch vessels directly from its facility on the Theodore Industrial Canal rather than relying on third-party yards. “We’re not competing with the major yards,” Rice said. “We’re adding capacity that the Navy needs right now.” — Ben Hayden

You may already have these Metalworking Tables in your shop. We call them WELDSALE PLATENS, but you may call them:

Acorn Tables, Bending Slabs, Flat beds, Checkboards, Waffle Tables, etc. I’ll bet some of them could be 100 years old! They are true workhorses!

We have e NEW P Platens. We have e USED P Platens. AND we have many new, modern Clamps & Tools - in stock - to fit new AND old Platens!

Put a modern spin on your old Workhorses.

Come see us at

SurveyCAT

4416-CTC IPS

BOOTH #1918

rix ixm rin ine.com bri brixmarine.com ri xmari ri 360. 0 45 0. 4 7. 7 575 752 75 52 360.457.5752

Please visit us at the WorkBoat Show, Booth Number 904 2151 Dreer Street Philadelphia, PA 19125

www.workboat.com • DECEMBER 2026 • WorkBoat

+1-215-739-7474 sales@weldsale.com 33


TOP NEWS STORIES OF 2026

5

FOREIGN INVESTMENT FLOWS INTO US SHIPYARDS

Hanwha has invested more than $200 million in Philly Shipyard since 2024.

alongside 15 cooperation agreements and an $80 million joint research program. For Korean builders, a U.S. foothold is a ticket to Navy and Jones Act work. For Washington, it is a shortcut to expanding domestic capacity, technology, and know-how. Hanwha’s Philly Shipyard, which the South Korean

Hanwha Philly Shipyard

F

oreign shipbuilders are putting big money into the U.S. maritime industrial base, and the biggest checks are coming from South Korea. Under the July 2025 U.S.–South Korea trade agreement, Seoul pledged $150 billion toward shipbuilding cooperation, part of a $350 billion commitment. The initiative is called Make American Shipbuilding Great Again (MASGA). It is not all cash. The final deal carved out government-backed financing for shipbuilding, a mix of investments, loans, and guarantees. South Korea’s legislature passed an enabling law in March, and in July the two governments opened the Korea–U.S. Shipbuilding Partnership Center in Washington,

conglomerate acquired in 2024, has historically finished roughly one ship every eight months — a lackluster production rate by South Korean standards. The Philadelphia shipyard has one large crane, whereas a comparable yard in South Korea has four. In August, the policy incentive sharpened when President Trump signed a controversial national security memorandum allowing foreign shipbuilders to construct U.S. Navy vessels. Under this model, foreign builders may build up to two ships at their home yards, provided they make substantial and durable investments in America’s shipyards and train an all-American workforce. Hanwha is furthest along. Its purchase of Philly Shipyard for $100 million has grown into a larger commitment: more than $200 million invested since 2024, a workforce of about 2,100 (up from 1,700), and a $5 billion plan to add docks and quays and raise output to as many as 20 vessels a year. The yard is

KEEP YOUR FLEET MOVING From valves and pipe to automation, fittings and engineered solutions, W&O delivers the products and expertise maritime professionals rely on to keep vessels working and projects moving. With 50+ years of marine industry experience, experience global sourcing and a strategic network of local experts, we bring together the right products, technical knowledge and support when and where you need it.

VISIT W&O AT BOOTH 1219 wosupply.com 34

www.workboat.com • DECEMBER 2026 • WorkBoat


From surveying Gulfport

To surveilling The Luzon Strait

BOOTH 3864 Co-Located with:

OCEAN AUTONOMY THAT WORKS BUILT IN THE USA


now winning government work. In July, the administration announced a $1.4 billion contract for two “Golden Defender” missile-tracking ships to be built there under a Tote Services management contract. Hanwha is also a subcontractor on the Navy’s Next Generation Logistics Ship program. Hanwha also wants to buy Austal USA. Its nonbinding proposal in August valued the Mobile, Ala., shipbuilder at $1.05 billion to $1.2 billion. Then a domestic rival appeared. On Sept. 9, Austal disclosed that Wildcat Infrastructure, a U.S. firm, had offered $1.25 billion to $1.35 billion and said it would run the business as a standalone platform under the Austal brand. On Oct. 14, Austal extended Hanwha’s due diligence period as it weighed the higher Wildcat approach. No preferred buyer has been named, and any sale would still need federal defense and security review. Another large South Korean shipbuilder, HD Hyundai, had been reported as close to buying a yard near San Diego or on the Texas Gulf Coast. That hasn’t happened, likely because U.S. yard prices have soared as a result of the MASGA initiative, analysts say. Instead, on Oct. 22 HD Hyundai signed a joint venture with Kiewit, forming HD Kiewit Shipbuilding, to build a new

36

shipyard in Ingleside, Texas. Construction is targeted for 2027 and full operations for 2029. The company also has agreements with Huntington Ingalls Industries and a modernization MOU with Fraser Industries in Superior, Wis. That yard’s parent is now itself being acquired by Wildcat Defense, which plans to invest $350 million there. Samsung Heavy Industries, the third of South Korea’s “big three” shipbuilders, has no U.S. shipyard and is not buying one — for now. It is supplying design, automation, and training instead. It is working with General Dynamics NASSCO and DSEC on the Navy logistics ship, with Saronic on its $3 billion-plus Port Alpha yard in Brownsville, Texas, with Vigor on repair work and welder training, and with Conrad Shipyard on an LNG bunkering vessel. — Eric Haun

6 W

MARINER AT THE HELM OF MARAD

hen Stephen Carmel took over as administrator of the Maritime Administration (Marad) in December 2025, he inherited an agency long seen in Washington as a

Marad chief Stephen M. Carmel spent more than four decades in the maritime industry before entering government.

grant office. Optics aside, Marad’s role is evolving, with the White House tasking the agency to lead the revitalization of the nation’s maritime and shipbuilding base. Carmel told House lawmakers in April that the U.S. accounts for less than 1% of global commercial shipbuilding, while China’s share tops 55%. The roughly 80 privately owned U.S.-flag vessels in international trade carry less than 1% of the country’s cargo by volume. The U.S. has not built a ship for export since 1960. The Senate confirmed Carmel 53-43 on Dec. 18, 2025, making him the agency’s 21st administrator. A U.S. Merchant Marine Academy

www.workboat.com • DECEMBER 2026 • WorkBoat

United States Maritime Administration

TOP NEWS STORIES OF 2026


graduate and former tanker captain, he is the first Marad chief in more than 20 years to hold an unlimited master’s license. He spent years at Maersk Line Ltd., where he ran the U.S. Marine Management business unit and became president of the company after its 2023 sale to Maritime Partners. Carmel told WorkBoat he didn’t need a briefing on why the industry matters, and that he often knows the CEOs who come to him with problems. “This is a moment I’ve been waiting for my whole career,” he said, adding that the challenge is not to squander it. The Trump administration’s Maritime Action Plan, released in February, rests on four pillars: shipbuilding capacity, workforce, the industrial base, and national security. The White House has put its cost at roughly $45 billion to $55 billion over a decade. Congress has been slower. Staffers and industry leaders say the whole package is unlikely to pass this year, even with bipartisan support for the companion SHIPS Act. That leaves Carmel executing what Marad can do on its own. His organizing idea is cargo, not subsidies. “Cargo demand enables vessel deployment,” he told the House panel. Cargo comes first, starting with re-flagged ships, Carmel told WorkBoat. Shipbuilding follows, probably including at least two new yards, since the largest containership built here is a 3,500-TEU Matson feeder. He called it a 10-year project at a minimum. Several efforts are underway. On financing, Carmel wants to turn Title XI from what he called a clunky loan guarantee program into a real financing tool. He said an online application is close to beta testing. Marad opened a public docket on vessel and shipyard financing on Aug. 28, and comments have been rolling in. On workforce, the agency is developing an inland waterways recruiting program, including a video for high school guidance counselors. Carmel notes that towboat deckhands do not come up through the academies. Marad also announced $498 million in port infrastructure grants on Oct. 27. A day later, it approved an $8.2 billion

BOOTH 2246

Family-Owned and Values Fostered Since

1875

SCAN HERE

WWW.COLONNASHIP.COM WWW.COLONNASHIP.COM

BOOTH 2765 Co-Located with:

Bending to perfection. Made in Germany.

BENDING SOLUTIONS FOR SHIPBUILDING

www.workboat.com • DECEMBER 2026 • WorkBoat

Large-diameter pipe bending Tight radii with consistent accuracy Efficient fabrication of complex piping systems

High repeatability for demanding production environments Customized Heavy Duty bending solutions

www.schwarze-robitec.com

37


TOP NEWS STORIES OF 2026 offshore LNG export terminal off Texas. The environmental review took 410 days, which the Transportation Department described as the fastest deepwater port review in more than two decades. It was Marad’s third deepwater port approval of the administration, a program the agency took over from the Coast Guard.

The most trailblazing effort, perhaps, is nuclear. In August, Marad signed a memorandum of cooperation with Core Power, which is targeting first construction of nuclear-powered ships in 2028. It was followed by exploratory agreements covering small modular reactors at the ports of Long Beach and Corpus Christi. It’s a tough road ahead for domestic

maritime revitalization efforts. Congress has not yet decided how to pay for the goals of the Maritime Action Plan, and Carmel is working with an agency whose budget and authority are modest compared with the administration’s lofty maritime ambitions. Carmel said he is seeing a shift in the national conversation, noting that maritime is becoming a larger part of trade and infrastructure debates. In addition, he has his eye on how much cargo moves on U.S.-flag ships, whether on inland rivers, the Great Lakes, or foreign trade. If those volumes rise in a meaningful way, he told WorkBoat, shipbuilding can flourish. It will be years before anyone can judge the result. — E. Haun

7 e

Se

e

h tt

w

o Sh

th t oa Boo B k h, or 4t W nd 2 ec D us

a

C

50

26

Quality Commercial Vessels... Built by Burger to Your Requirements

pt Conceenger Vessel

e 92’ Ste

l Pass

Burger is recognized worldwide for quality custom vessels that provide years of dependable service. • Aluminum and Steel Fabrication • • Passenger Vessels - Hull Plate Replacement • Water Taxis - Exterior and Interior Coatings • Wind Farm Support Vessels - Engine & Generator Repowers • Crew Supply Vessels - All Vessel System Repairs • Other Vessels to 200’ (60m) - Interior Refresh

New Construction | Vessel Haul-Out | Refit & Repair Services +1 920.684.1600 | sales@burgerboat.com | BurgerBoatCommercial.com Proudly built in the USA

38

NUCLEAR GAINS GROUND

ommercial maritime nuclear power has moved beyond isolated concept studies this year as federal agencies, classification societies, ports, ship operators, and reactor developers have begun building the framework needed for deployment. “The work moved from studies to documented review and approval milestones,” said Patrick Ryan, ABS senior vice president and chief technology officer. The Maritime Administration (Marad) launched a small modular reactor (SMR) initiative for commercial shipping in May. Its request for information sought a U.S.-built, scalable, repeatable, commercially viable model while asking industry to address liability, insurance, port access, shipyards, workforce, and international acceptance. Regulators moved in parallel. In June, the U.S. Nuclear Regulatory Commission and Coast Guard signed a memorandum of understanding establishing how the agencies will coordinate oversight of civilian maritime nuclear projects, including floating nuclear power plants and civilian nuclear propulsion.

www.workboat.com • DECEMBER 2026 • WorkBoat


LIGHTWEIGHT & POWERFUL

DECK MACHINERY Hypac is a world leading designer and manufacturer of hydraulic and electrical lightweight deck equipment. Our customizable product range and in-house engineering ensure the optimal equipment your vessel and operator.

ANCHOR WINDLASS CAPSTANS POWER UNITS

15M - 150M VESSELS

WINCHES STEERING SYSTEMS

With global sales and service support, Hypac equipment is your best marine solution worldwide.

CLASS APPROVED DESIGNS

C O N TA C T U S info@hypac.com.au

+61 (8) 8249 9433

hypac.com.au


International rules are also being revisited. The International Maritime Organization’s Maritime Safety Committee endorsed a plan in May for revising the Code of Safety for Nuclear Ships, adopted in 1981, and amending SOLAS Chapter VIII. The plan calls for adoption of a revised Nuclear Code and the SOLAS amendments in 2030. Classification activity picked up as well. ABS, Spring, Texas, introduced a “Nuclear-Ready Notation” in May to help owners and designers account for future nuclear conversion during a vessel’s original design. Days later, the bureau granted approval in principle for integrating a nuclear reactor into a cargo vessel propulsion system developed through the Massachusetts Institute of Technology’s Maritime Consortium. In October, ABS and the Department of Energy signed an agreement covering nuclear-powered vessels, floating nuclear power, and the ports, shipyards, and industrial base needed to support them. Ryan said those milestones remain distinct from having a vessel ready for service. A Nuclear-Ready Notation accounts for features needed to accept a reactor later, while an approval in principle indicates that an early-stage concept is feasible under applicable class requirements. It does not approve a detailed design. Reaching construction and operation would still require detailed class review, reactor licensing, flag-state acceptance and, for international service, acceptance by port and coastal states. Some of the year’s most tangible progress came from the reactor side. Deployable Energy, Houston, saw its Unity microreactor achieve zero-power fueled criticality (in which a chain reaction takes place, but no electricity is produced) at Idaho National Laboratory on June 30. Deployable is planning fullpower testing in 2027. Hornbeck Offshore Services, Covington, La., signed a memorandum of understanding with Deployable Energy in August and made a strategic investment. Later that month, Deployable announced that the Department of 40

Core Power is targeting construction of nuclear-powered ships starting in 2027.

Energy’s National Reactor Innovation Center selected it for a future maritime demonstration with Hornbeck. Ports became another major piece of the developing picture. Marad signed a July agreement with the Port of Long Beach to explore SMR technologies, resilient port microgrids, shoreside power, and infrastructure supporting emerging vessel propulsion concepts. The Port of Corpus Christi followed in August, becoming the second port to enter such an agreement. Corpus Christi is also working with Core Power, London, U.K., on a site-specific study of floating nuclear power and readiness to receive nuclear-powered commercial vessels. Core Power announced Aug. 24 that it had signed a nonexclusive memorandum of cooperation with Marad aimed at developing commercial, industrial, and regulatory pathways for future U.S.-flagged nuclear-powered merchant ships. The company is targeting first construction from 2028, subject to regulatory, commercial, project, and industrial readiness. By fall, the conversation had widened across the port industry. In an Oct. 22 release following its annual convention in New Orleans, the American Association of Port Authorities highlighted SMRs as a potential source of port power, resiliency, and future vessel propulsion. For commercial deployment, Ryan said the biggest obstacle beyond the reactor is “the international framework around liability, insurance and regula-

Core Power

TOP NEWS STORIES OF 2026 tion.” Owners need confidence a vessel can be insured and trade across jurisdictions before placing an order, he said. Ryan said floating nuclear power facilities are likely to come first because they remain in one location and require approvals from fewer jurisdictions. Maritime Administrator Stephen Carmel said the implications could eventually reach far beyond replacing conventional fuel. “SMRs and ship propulsion will very much change the way ports operate,” Carmel said. “The networks will move much faster. That means ports have to move faster. They have to operate differently. What ports are important will change. The size of ships will change. Basically, the very architecture of trade is going to change here, and it’s going to be a massive change for the way ports do business.” — Steve Mosco

8

A LIVELY YEAR FOR MERGERS AND ACQUISITIONS

S

altchuk Resources wrote a large check to dig in on dredging. The Seattle-based company announced Feb. 11 that it would buy Great Lakes Dredge & Dock, Houston, for about $1.5 billion. The deal closed April 1, making the country’s biggest dredging contractor a standalone Saltchuk unit. Several shipyards traded hands. Magnet Defense, Miami, a developer of autonomous maritime platforms, completed its purchase of Metal Shark on Jan. 6, taking over the builder’s Jeanerette and Franklin, La., yards to build uncrewed surface vessels for the Navy. Three weeks later, Singaporean company Seatrium closed the sale of its AmFELS yard in Brownsville, Texas, to Turkey-based Karpower Valley, a Karpowership affiliate, for about $51 million. Antin Infrastructure Partners, a Paris-based fund, agreed in February to buy Vigor Marine Group from a Lone Star Funds affiliate. That deal closed Aug. 17. Vigor runs

www.workboat.com • DECEMBER 2026 • WorkBoat


TOP NEWS STORIES OF 2026

9

Labrador, from its parent CFFI, which is under creditor protection, and lender HPS Investment Partners. Perhaps the biggest question is Austal USA, the Mobile, Ala., yard. On Aug. 10, Austal disclosed a nonbinding offer of $1.05 billion to $1.2 billion from Hanwha Defense USA. The same week, it warned of a large loss at the U.S. unit tied to legacy contracts. Hanwha already owns 19.9% of the Australian parent and dropped a wholecompany bid in 2024. Wildcat Infrastructure, a Miami investor, countered Sept. 9 with $1.25 billion to $1.35 billion and a promise to keep the Austal name and run the yard standalone. Some observers think Washington may favor an American owner. By midOctober, Austal had extended Hanwha’s due diligence and said terms were under negotiation, while talks with Wildcat continued. Neither bid is binding. Any sale needs to be cleared for defense and security implications as well as antitrust considerations. A Wildcat affiliate, Wildcat Defense, agreed in October to buy Fraser Industries, the Superior, Wis., shipbuilder and Great Lakes repair yard. It plans to invest $350 million, and closing is expected in about three months. Also in October, Hanwha announced that Hanwha Defense USA will take a 60% controlling stake in Philly Shipyard, an internal reshuffle meant to position the yard for government as well as commercial work. — E. Haun

Hines Furlong Line acquired Campbell Transportation’s river division.

www.workboat.com • DECEMBER 2026 • WorkBoat

OIL, WIND AND CALLS FOR PERMITTING REFORM

T

Campbell Transportation Company

repair and fabrication yards in Seattle, Portland, Vancouver, San Diego, and Norfolk. The tug-and-barge business saw consolidation. Arcosa, Dallas, Texas, agreed in February to sell barge builder Arcosa Marine Products to Wynnchurch Capital, Rosemont, Ill., for $450 million, and the sale closed April 1. The business has six yards on the inland system and posted $383 million in revenue last year. Kirby, Houston, bought 23 inland tank barges and three towboats in March for $95.8 million. In October it said it would pay $115 million for nine towboats, 14 tank barges and a fleeting operation in Rockport, Texas, with closing expected this quarter. Hines Furlong Line, Paducah, Ky., closed on Campbell Transportation’s Pittsburgh-based river division in January. Moran Towing, New Canaan, Conn., finished folding the tractor tugs of Bisso Towboat, New Orleans, into its fleet in July. Turn Services, New Orleans, closed on St. John Fleeting, Garyville, La., in September. Infrastructure fund Tallvine Partners, Miami, bought Vallejo, Calif.-based Lind Marine in May. In September, it closed on Crosby Enterprises, the Galliano, La., towing, dredging and shipyard company, through a bankruptcy court sale after Crosby filed for Chapter 11 in March. In the offshore sector, Hornbeck Offshore Services, Covington, La., and Helix Energy Solutions, Houston, agreed in April to combine in an all-stock deal, with Hornbeck holders getting about 55% of the combined company. The deal closed Sept. 1 under the Hornbeck name and the HOS ticker. The deal puts Helix’s well intervention and robotics work alongside Hornbeck’s vessel fleet, and the companies projected more than $75 million in synergies. In March, the Chouest Group, Cut Off, La., agreed to buy Champagne Energy Solutions, a Houma, La., decommissioning contractor, and said more purchases would follow. Chouest went north in October, buying Horizon Maritime, an Arctic and harsh-environment operator based in St. John’s, Newfoundland and

he second Trump administration’s relentless campaign against offshore wind, combined with an aggressive schedule for oil and gas leasing, appears to presage a generational shift in U.S. energy policy. Trump’s executive order, “Unleashing American Energy,” set the stage for Congress to act. Republicans passed their “One Big Beautiful Bill Act,” signed by Trump in July 2025, requiring no fewer than 30 Gulf of Mexico oil and gas lease sales through 2040, plus six lease sales in Alaska’s Cook Inlet. Within weeks, Transportation Secretary Sean P. Duffy withdrew or terminated $679 million in funding for offshore wind-related port and infrastructure projects, declaring wind projects “doomed” and promising to reallocate the money to other port improvements. “Wasteful wind projects are using resources that could otherwise go towards revitalizing America’s maritime industry,” said Duffy, insisting the administration was “prioritizing real infrastructure improvements over fantasy wind projects that cost much and offer little.” The first lease sale in December 2025 generated $300.4 million. Results from the second sale in March 2026 were more modest at $46.97 million, a drop of about 84%. The third sale Aug. 12 brought $82.68 million in high bids for 59 ocean blocks, the Department of the Interior reported. The administration promised regulatory reforms to speed offshore oil and gas development, and to investigate potential for other marine minerals extraction. To that end, the Department of the Interior moved to recreate a unified Marine Minerals Administration, incorporating both the Bureau of Ocean Energy Management (BOEM) and the Bureau of Safety and Environmental Enforcement (BSEE). Economic and environmental fallout from the April 2010 Deepwater Horizon blowout and ensuing Gulf oil 41


spill led a year later to the creation of BOEM and BSEE to manage offshore energy and ensure that energy companies maintained safe operations. In a letter to the Government Accountability Office, Democratic lawmakers asked “whether Interior is collapsing the firewall between resource development and independent safety oversight.” While the Interior Department paved the way for more oil and gas leasing in 2026, it moved to derail previous permits for offshore wind projects, dangling lucrative buyouts for European wind companies to walk away. In August, German energy company RWE agreed to relinquish its wind leases off New York, California, and Louisiana under a $1.22 billion settlement with the Interior Department. It was the single biggest deal struck by the administration to kill offshore wind projects. RWE explained its decision: “After careful consideration, it was determined there is no path forward to permit these projects in the U.S. for the foreseeable future.” Environmental groups and offshore wind advocates claimed overall wind lease buyouts would cost the federal government $3.9 billion. The administration’s pivot to buying out leases came after other beleaguered offshore wind developers managed to hang on — largely through their appeals for intervention of federal courts, where judges cast skeptical eyes on the administration’s attempts to rescind permits for projects already well under construction.

Ørsted finished installing all 65 Revolution Wind turbines off Rhode Island.

By February, the courts had upheld five major turbine projects in Northeast waters that had been original poster children for U.S. offshore wind ambitions — dating back to the first Trump administration, and the Biden administration’s four years of enthusiasm for renewable energy. Wind power advocates insist that longterm U.S. prospects still hold with power demand steadily rising, particularly in the Mid-Atlantic and Northeast regions, driven by electrification trends and data center construction. International energy analysts Wood Mackenzie foresaw the immense demands coming for North American energy supply. “U.S. data center capacity is expected to increase from approximately 24 GW to 110 GW between 2026 and 2030, accounting for 68% of total load growth over the period,” Wood Mackenzie predicted in an April report. “With a

Ørsted

TOP NEWS STORIES OF 2026 projected increase of more than 400,000 GWh, data centers are expected to consume eight times more electricity than electric vehicles over the same timeframe — representing one of the most concentrated surges in electrical power demand in modern history.” Despite its multiple federal court setbacks, the Trump administration continued trying to rescind wind project permits. Even after developer Ørsted installed the 65th and final turbine on its Revolution Wind project off Rhode Island, the Interior Department filed a new motion Oct. 9 to support a 2024 lawsuit by Green Oceans, an anti-windenergy group. Beyond partisan politics, the grinding fight alarmed both wind-energy advocates and traditional offshore energy developers. Bipartisan legislation proposed in Congress this year would speed permitting for energy infrastructure projects, including wind. Erik Milito, president of offshore energy trade group the National Ocean Industries Association, called on Congress to move on permitting legislation after news of the latest attempt to stop Revolution Wind. “Predictable regulatory processes and timely decisions are important for offshore energy development of all kinds,” he said. “The secondguessing of federal approvals that have already gone through a lengthy review process is precisely why Congress must pass comprehensive permitting reform legislation, specifically the Bipartisan American Affordability and Jobs Act.”

ork

42

www.workboat.com • DECEMBER 2026 • WorkBoat


WWW.CHANCEMARITIME.COM

REAL BOATS. REAL WORK.

CHARTERS LEASES SALES

DESIGNED PROGRAMMED

MADE IN

USA

BOOTH UI-4342


TOP NEWS STORIES OF 2026 Within days, the administration again targeted another project, New England Wind, for a permit remand. Sen. Sheldon Whitehouse, D-R.I., warned the ongoing demands threatened to scuttle bipartisan hopes to speed major infrastructure projects. Undeterred, in an Oct. 23 proclamation, Trump tried a new gambit: revising earlier arguments, rejected by courts, that offshore wind turbines are a national security risk. Wind energy components “pose serious national security concerns, including by relying on foreign parts that contain cybersecurity vulnerabilities that could lead to remote control access to wind turbines and cause power disruption,” Trump contended. That could threaten the electrical grid and critical infrastructure, and affect national airspace, causing radar interference, he claimed. — Kirk Moore

10

LNG ONLINE AND IN DEMAND

W

ith the large-scale export of liquefied natural gas (LNG) ramping up across the Gulf Coast over the past decade, LNG has gone from a relatively small player — compared with petroleum-based fuels, at least — to a major economic driver, not just for Louisiana and Texas but for the world. In the latest news, the U.S. Department of Transportation’s Maritime Administration (Marad) announced Oct. 28 the approval of ST LNG LLC’s application to build an $8.2 billion deepwater LNG export terminal about 10.4 miles off Matagorda, Texas. Construction could begin in 2027, and

THE ULTIMATE OPERATOR FOCUSED WATERCRAFT

the terminal could come online in 2029. With full buildout, the ST LNG port would feature 20 platforms, 7.7 miles of pipeline, four mooring systems, and four floating LNG storage tanks, each capable of moving 2.1 million metric tons per annum, according to the Department of Transportation’s announcement. The terminal would raise the United States’ LNG export capacity by 7-9%. “This project will unleash American energy — ensuring demand for Texas’ bountiful natural gas and the men and women who extract it continues to grow,” said U.S. Transportation Secretary Sean P. Duffy. “Building this state-of-the-art port will also generate thousands of jobs in the Gulf and cement our nation’s status as the number one energy exporter in the world.” Texas is also home to Freeport LNG, Corpus Christi Liquefaction, and Golden Pass LNG. In Louisiana, liq-

VISIT US AT WORKBOAT

BOOTH #3562

CONTACT US TODAY FOR YOUR NEXT BUILD WWW.THEWHISKEYPROJECTGROUP.US

44

www.workboat.com • DECEMBER 2026 • WorkBoat


uefaction facilities include Sabine Pass Liquefaction, Cameron LNG, Calcasieu Pass LNG, and Plaquemines LNG. Additional facilities under construction or in development include Woodside Energy’s Louisiana LNG, CP2 LNG, Commonwealth LNG, Port Arthur LNG, Rio Grande LNG, and Delfin LNG. The U.S. is the world’s top LNG exporter, and the majority of its exported LNG is bound for Europe. In the first half of 2026, the U.S. averaged 17.4 billion cu. ft. per day (Bcf/d), a 23% increase compared to the same period in 2025, according to the U.S. Energy Information Administration (EIA). That surge in exports coincided with growth in export capacity — terminals coming online — and shifts in the LNG market brought on by Russia’s invasion of Ukraine and the war in Iran. Prior to the war in Ukraine, Russian pipelines delivered much of Europe’s gas supply. In view of the war, European countries turned, in large part, to U.S. sources for natural gas. Another growing market for U.S. LNG is Asia. In March, an Iranian ballistic missile struck Qatar’s Ras Laffan Industrial City, destroying a pair of LNG compressor trains and disrupting LNG movements through the Strait of Hormuz. At the time, Asian markets accounted for 80% of Qatari LNG. In the first half of 2026, average daily U.S. LNG exports to Asia increased by just over 2 Bcf compared with the prior year. In August, Europe claimed 52% of U.S. LNG exports (269.3 Bcf), while 31% (158.7 Bcf) went to Asia. That was a 76% increase in Asia-bound U.S. LNG in August compared to the same month in 2025, although that number was down 21% from July. That surge in demand for LNG around the world is translating into more ship traffic on U.S. waterways which, in turn, is driving demand for tugs and other support vessels. “LNG terminals create increased tug demand because LNG carriers require specialized support during arrival, transit, standby, docking, and departure when requested,” Ron Droop, senior

An LNG carrier docked at Cameron LNG’s export terminal in Louisiana.

vice president of Moran Towing Corp., told WorkBoat. “These operations may require additional assets with qualified crews to meet the safety and operational requirements of the terminal and vessel,” Droop added. Several shipyards in the Gulf Coast region are amid tugboat build programs

www.workboat.com • DECEMBER 2026 • WorkBoat

Cameron LNG

TOP NEWS STORIES OF 2026 directly tied to LNG export facilities. C&C Marine and Repair in Belle Chasse, La., is engaged in an eight-tug build program managed by Harbor Docking & Towing (HDT). Four of those tugboats will support Woodside’s forthcoming Louisiana LNG terminal. Earlier in 2026, Woodside signed a $300 million contract with Green Tug Towing, which will provide towing services for ships calling on Louisiana LNG for a 20-year term. Green Tug is a joint venture between HDT and Saltchuk Marine Terminal Services. Woodside is targeting 2029 for Louisiana LNG to come online. Master Boat Builders in Coden, Ala., is building eight tugboats for New Orleans-based Maritime Partners, and Moran Towing, New Canaan, Conn., completed its acquisition of Bisso Towboat Co., New Orleans, this summer. Both of those deals were shaped, in part, by demand for tugboats from LNG carriers. — F. McCormack

45


VESSEL REPORT Towboats

Pushing Forward Despite a challenging market, towboat operators and builders continue finding ways to meet demand and maintain the fleet. By Frank McCormack, Senior Editor

Frank McCormack

The Big J.O., part of Vicksburg, Miss.based Yazoo River Towing, pushes a tow of tank barges through Melvin Price Lock and Dam on the Upper Mississippi River near Alton, Ill.

H

igh water, low water. Temperatures in the 90s or 30s. Birthdays and holidays. Through mayfly swarms and eddies. Any time of year and in almost any weather condition, towboats and their crews are hard at work pushing barges along the coastal and inland waterways of the United States, transporting the raw materials and finished products that drive the United States’ economy. In a similar way, operators and shipyards alike are finding ways to motor ahead, growing and maintaining the nation’s towboat fleet, despite challenging market conditions.

46

PRICE FACTORS One pressure point on towboat construction today is the price of steel. Inflation, a 50% tariff on steel imports, and supply and demand forces have driven up steel prices this year, which has had the downstream effect of increasing the price tag for just about everything on new towboats. “The market is still soft in building new because of all the inflation,” said Kurt Moerbe, vice president of Vessel Repair and Construction, Port Arthur, Texas. “Inflation since the end of last year has run pretty rampant in the steel market.” Moerbe said he’s seen steel prices alone climb more than www.workboat.com • DECEMBER 2026 • WorkBoat


Towboats

www. Doug Stewart

30% this year, and Tara Steiner Marshall, president of Steiner Shipyard, Bayou La Batre, Ala., said she’s seen the same. “‘We’ve never seen times like this with steel,’” Marshall said, quoting a steel sales contact for the shipyard. Marshall said monthly steel price increases have been the norm of late. “At one point this year, we had two increases in a month,” she said. “They’re telling me the biggest issue is going to be availability.” And those price increases for steel don’t just drive up the cost of a vessel’s hull, Marshall said. “Every time steel goes up, it makes every piece of that boat go up,” she said. “Steel prices affect almost everything on that boat.” Interestingly, multiple people — both builders and operators — who spoke with WorkBoat on the status of the towboat market pointedwww.orca.eu to data center construction as one of the causes for higher prices and longer lead times in

A worker fabricates a steel structure for a towboat at Steiner Shipyard in Bayou La Batre, Ala. Steel prices have climbed throughout the year, shipyards say.

the towboat construction market. “Construction of data centers, combined with other global factors, have driven up costs across the board, putting pressure on margins and increasing vessel prices,” said Tony Cibilich, presi-

dent and owner of C&C Marine and Repair, Belle Chasse, La. “At this point, we do not see a clear indication that these pressures will ease anytime soon.” PROFESSIONAL Data center construction/ MILITARY is even RIB viewed as a driver of longer lead times

www.orca.eu

PROFESSIONAL / MILITARY RIB

www.orca.eu www.pennelusa.com +1 843-881-9026

PROFESSIONAL / MILITARY RIB

INFLATABLE SHELTER

DEF

INFLATABLE SHELTER

DEFENSE

INFLATABLE SHELTER

DEFENSE DEFENSE

ENGINEERED FABRICS ENGINEERED TO PROTECTFABRICS MAN, TO PROTECT MAN, EQUIPMENTS AND ENGINEERED FABRICS EQUIPMENTS AND MAN, TO PROTECT THE ENVIRONMENT THE ENVIRONMENT

UV

WEATHER WEATHER RESISTANCE RESISTANCE ULTRAVIOLET LIGHT RESISTANCE

FIRE RESISTANCE

UV

WEA RESI

UL TRAVIOLET LIGHT RESISTANCE

UV UV

FIRE RESISTANCE

FLEXIBLE OIL TANK

FLEXIBLE ENGINEER OIL TANK TO PROT EQUIPM THE ENV

EQUIPMENTS AND THE ENVIRONMENT

ULTRAVIOLET ULTRAVIOLET LIGHT LIGHT RESISTANCE RESISTANCE

FLEXIBLE OIL TANK

MECHANICAL AND ABRASION

HIGH LOW HIGHAND AND LOW TEMPERATURE TEMPERATURE RESISTANCE

RESISTANCE

WEATHER RESISTANCE

HIGH AND LOW TEMPERATURE RESISTANCE

FUEL AND CHEMICAL

FUEL AND MECHANICAL RESISTANCE RESISTANCE CHEMICAL AND ABRASION FIRE MECHANICAL RESISTANCE FUEL AND RESISTANCE RESISTANCE

AND ABRASION RESISTANCE

CHEMICAL RESISTANCE

www.workboat.com • DECEMBER 2026 • WorkBoat

HOVERCRAFT HOVERCRAFT HOVERCRAFT FIRE AIRCRAFT LIFTING BAG RESISTANCE

MEC

AIRCRAFT LIFTING BAGAND RESI

AIRCRAFT LIFTING BAG

47


VESSEL REPORT Towboats Data centers aren’t the only source of surging construction prices for towboats over the past decade, Moerbe said. “You’ve had Subchapter M hit, you’ve had tariffs hit, and you’ve had Tier 4 hit,” Moerbe said. “Those three factors have played a huge role in the pricing of these boats — and then you have to throw in natural inflation.”

Vessel Repair

FLEET STRATEGY

An upside-down towboat hull is transported from the fabrication shop at Vessel Repair and Construction in Port Arthur, Texas.

for some marine engines. “We are, in fact, seeing engine lead times stretch out, and the suppliers tell us it is due to orders for engines for data center standby generators,” said

Jason Knoll, vice president of engineering for Nashville, Tenn.-based Hines Furlong Line (HFL). “We hear about major quantities of larger engines being ordered for this use.”

The Pacific Northwest’s Premiere Full Service Shipyard

New construction - refit - maintenance - repair (306) 417-0709 www.platypusmarine.com 48

Elevated newbuild costs are forcing vessel owners and operators to tailor their fleet growth and maintenance strategies accordingly. On the new construction side, market forces are affecting the size and quantity of vessel orders. “They’re taking a more cautious approach,” Moerbe said of vessel owners. “They’re building one at a time, two at a time, and not signing up for a large build without knowing what the market’s going to do in the future.” New construction orders are gravitating toward smaller-horsepower towboats, with vessel owners opting to extend the life of higher-horsepower towboats through refurbishment. Knoll said his team at Hines Furlong Line is certainly “living that mentality.” On the newbuild side, HFL is about halfway through its current build program with Eymard and Sons Shipyard, Harvey, La., with two 1,600-hp towboats and two 2,400-hp towboats left to deliver. “This program should complete in 2027 or early 2028,” Knoll said. “These boats could go into service for HFL directly or into our lease fleet.” On the refurbishment side, HFL has partnered with Main Iron Works, Houma, La., on a pair of 4,000-hp towboats from the 1980s that will undergo overhauls, mechanical upgrades, and crew-quarters rebuilds, Knoll said. Also at Main Iron Works, HFL is overhauling a series of 3,200-hp towboats that date to the mid-1990s. Knoll said HFL has a track record for sourcing and breathing new life into higher-horsepower towboats. “Our goal is to put a vessel into service that feels and operates like a new

www.workboat.com • DECEMBER 2026 • WorkBoat


Over 60 Years of Experience in Quality Shipbuilding, Vessel Repairs & Reconfigurations Yank Marine, Inc. has built and repaired thousands of boats: private yachts, commercial and fishing craft, military vessels, and a large array of USCG-certified passenger vessels.

Lifting Capacity up to 903 US Tons

(2) Full-Service Shipyards

200’ Berthing/Loading Dock

Yank Marine Services, LLC

Yank Marine, Inc.

487 Main Street, Dorchester, NJ 08316 Phone: 856-785-0100 • 50 ton Marine Travelift

Mosquito Landing Road, Tuckahoe, NJ 08250 Phone: 609-628-2928 • 75 ton Marine Travelift • 300 ton Marine Travelift

• 820 metric ton Marine Travelift!

Recently Delivered Hull #94 Jackie Robinson

Under Construction Truckable Push Boat

Steel Vessel Construction & Repair

www.yankmarine.com • bjyank@yankmarine.com


VESSEL REPORT Towboats

C&C Marine and Repair

Capt. Bill Archie to its linehaul fleet. Also on the docket for the company is refurbishing one of its higher-horsepower vessels. “New construction pricing has gotten hard to pencil for higher horsepower, so extending the life of what you have is ideal,” Benken said. “For example, we will be completely refurbing our 4,000hp Tom Huckabee Q1 of next year with JMI Elmwood. We are removing the entire house and starting with a brandnew superstructure. The boat will have all the accoutrements of a newbuild for a fraction of the price.” The 2,600-hp Capt. Pete Ciaramitaro is moored at C&C Marine and Repair’s shipyard on the Gulf Intracoastal Waterway in Belle Chasse, La.

boat but has as much of the tried-andtrue robust equipment as possible,” he said. Knoll added that, unlike higher-horsepower vessels, smaller towboats are not typically candidates for refurbishment, because the “spread” between the capital outlay to build new or refurbish is not as big. Northport, Ala.-based Parker Towing Co. (PTC) is another company involved in both newbuilds and service-lifeextending rebuilds. “Our fleet boats are one of our focus areas for replacement,” said Dan Ben-

ken, PTC’s senior vice president for operations and logistics, “and we have partnered with Serodino in Chattanooga [Tenn.] for the past couple years on newbuilds. We started with the Johnny Holt for our Decatur [Ala.] fleet and recently took delivery of the Chipper Rabbit. We will take delivery of our third boat in this series later this year, with more to come beyond that. We have several other newbuilds under construction elsewhere to complement our unit tow operations as well as our dry-cargo canal business.” PTC is also building its fleet through acquisition, most recently adding the

EVK WATER LUBRICATED SHAFT SEAL

BUSY TIME Despite broader economic conditions, shipyards that serve the towboat industry are continuing to stay creative and active. C&C Marine, for instance, has followed up its recent four-vessel series for Canal Barge Co. with six similar 2,600-hp towboats built on spec. The first of those vessels recently sold to Sulphur, La.-based Southern Devall. “All six towboats are being built in a single bay, allowing us to dedicate resources to other projects while delivering a new 2,600-hp towboat every seven to eight weeks,” Cibilich said. Cibilich said his team is also planning to build another 10,000-hp towboat, similar to the 189'x50' John Paul Eck-

EVK OIL LUBRICATED SEALS STYLE RUDDER SEAL FOR THRUSTERS AND SPLIT OR SOLID DESIGN STERN TUBES

ST-100 WATER SOLUBLE NON-SHEENING EAL LOW FRICTION PTFE BEARINGS

CONTACT US Introducing the Marine ACE

Lip Seal Performance In A Small Package

50

DL-SALES.KEMELUSA@EKKEAGLE.COM KEMEL.COM | 408-398-3383 *Anytime* * nyt *A ytitime* Technical Support: 212-967-5575 yt www.workboat.com • DECEMBER 2026 • WorkBoat


Towboats stein delivered in January to Marquette Transportation, Paducah, Ky., by the second quarter of 2027. That vessel is also being built on spec. Cibilich said building a boat on spec offers some advantages to both the shipyard and prospective buyers. Cibilich added that C&C Marine can work with potential buyers on some design features. He also said the shipyard structures its payment terms in a buyerfriendly way, with a 25% deposit at the start of construction and the balance due upon delivery. C&C Marine even provides a letter of credit to secure the customer’s deposit. “This arrangement aligns the shipyard’s financial interests with the customer’s objectives: getting the vessel delivered as soon as possible,” he said. Moerbe said the new construction side of his business currently has a sizable backlog, thanks in part to contracts signed late last year. “We don’t just build towboats here,” he said. “We also build tank barges, so I’m building 25 tank barges for Westlake Chemical. I’ve also got four deck barges I’m building for a customer. And then I’ve got two towboats we’re building.” Vessel Repair and Construction also offers barge cleaning and a repair business, and the company is working to expand its repair capacity. This year, Vessel Repair received a $1.5 million grant from the Maritime Administration to help construct a new boat dock. “Hopefully, by the end of the summer next year, we’ll have an operable dock, and we’ll be hauling out towboats,” Moerbe said. Steiner Shipyard currently is building a pair of 130', 4,500-hp towboats for Florida Marine Transporters — the largest the yard has ever built. And while the yard is bidding on additional projects, Marshall said her team will likely build some truckable tugs and some 120'x30' deck barges if there’s a lull in new construction work. Like Vessel Repair, Steiner Shipyard also offers repair and rebuild services, and the yard recently added a 600-ton travel lift.

“New construction pricing has gotten hard to pencil for higher horsepower [vessels], so extending the life of what you have is ideal.” —Dan Benken, Parker Towing Co.

OPERATOR PERSPECTIVE Overall, operators said there are pros and cons to buying a new towboat “off the shelf.” “The benefit is you get a new vessel quickly,” Benken said. “However, depending on the stage you agree to the vessel, you might be stuck with some specs that are not ideal for your operation.” Despite towboat construction headwinds, operators who spoke to WorkBoat reported high usage rates and, in some cases, active barge maintenance and construction programs. Knoll said Hines Furlong Line is repairing and overlaying the sides of many

of its hopper barges. “We expect this treatment will provide around 10 years of added life to the hopper barges,” he said. “These barges will also be blasted and painted during this process.” Clark Todd, president and CEO of New Orleans-based Blessey Marine Services, said barge utilization is in the mid- to high-90s across all segments. The tank barge market is especially strong right now, Todd said. “We’re kind of in a really good supply-demand equilibrium as an industry,” Todd said, “which is something that feels really good for the first time in a while.”

BUILT FOR BIG WATER. BUILT FOR BIG PROJECTS.

Marine construction backed by more than a century of experience.

MARINE CAPABILITIES New vessel construction

Ocean-going and river barges

Dry docks and floating structures

Vessel conversions and marine projects

Complex steel fabrication

Engineering and production support

58-ACRE WATERFRONT FACILITY | 1M+ SQ. FT. | 750' SIDEWAYS-LAUNCH

TI DE WATE R B A R G E S

CO R DOVA P R OV I DE R I I

P OWER I NG AM ER ICA’ S WAT E RWAYS

BUILT FOR A ST RONG E R TOMORROW

M C MU R DO DI S COV E RY P I E R

COM PLE X STR UC TUR E S. R E M OTE PLAC E S.

VI S I T U S AT

BO OTH

#813 DECEMBER 2-4 | NEW ORLEANS

www.workboat.com • DECEMBER 2026 • WorkBoat

W W W. GI WX . N E T

51


BOATS & GEAR Batteries

Full Charge Caterpillar Marine develops battery system for hybrid, electric vessels.

Caterpillar

By Ben Hayden, Senior Associate Editor

Caterpillar Marine’s rackable, liquid-cooled battery system can be configured for hybrid or fully electric vessel propulsion.

C

aterpillar Marine is developing a production battery system for hybrid and fully electric vessels, targeting applications ranging from harbor tugs and ferries to inland workboats. In a fully electric configuration, the Cat Marine Battery System supplies the primary energy for vessel propulsion. In a hybrid installation, the batteries operate alongside Caterpillar engines, generators, and other powertrain components, the company told WorkBoat. The first production application uses lithium iron phosphate (LFP) chemistry. The liquid-cooled system has a 1C charge-and-discharge rate (meaning a battery can be charged in an hour), operates at voltages up to 1,420 VDC and can be arranged in multiple rack

52

configurations to fit within a vessel’s battery room. “We are developing a range of battery modules covering chemistries adapted to most duty cycles, with LFP as our first marine production application,” said Will Watson, marine product director at Caterpillar. Caterpillar expects tugs and ferries to be among the strongest candidates for the system because they generally operate close to shore, experience variable power demands, and may have regular access to charging infrastructure. “Beyond tugs, the Cat Marine Battery System is suited to additional segments including ferries and inland vessels,” Watson said. “Every vessel is different and requires a customized approach

specific to the application.” Tugs that alternate between highpower ship-assist work and periods of low-load operation or idling are among the earliest adopters, according to Watson. Pushboats and inland towboats could transition more gradually because of their continuous power requirements and long operating lives. “The strongest adoption we are seeing today for fully electric energy rooms is in the tug and ferry space: operations that stay close to shore and have variable power demands,” Watson said. Point-to-point and inland vessels with shoreside charging access also lend themselves to increased electrification. Hybrid systems may remain more practical for vessels operating at constant loads, over longer ranges or in areas with limited charging infrastructure. “Where duty cycles are constant or charging access is limited, a hybrid configuration is often the better fit,” Watson said. “Power options that include batteries and lower-carbon-intensity fuels are a way to modernize assets while avoiding heavy capex investments that are tied to the uncertainty of certain fuel economics and availability. Engine and battery technologies can be mutually supportive, and it’s important to design a path forward that aligns a vessel’s planned use with a vessel operator’s objectives.” Caterpillar describes that approach as the transition from a conventional engine room to an “energy room,” in which engines, batteries, generators, electric motors, power electronics, and controls operate as an integrated system. “We can transform conventional engine rooms that are powered by Cat’s range of diesel-powered marine engines into hybrid systems that combine our propulsion engines with electric motors, clutches, gensets, power electronics, controls and batteries,” Watson said. “The battery system works with Cat engines only, not third-party engines.” The battery system can operate independently in a fully electric installation and provides additional benefits when incorporated into a complete Caterpillar hybrid system, Watson said.

www.workboat.com • DECEMBER 2026 • WorkBoat


Batteries APPLICATIONS

HIGH-POWER PERFORMANCE The Cat battery system is designed to respond rapidly during towing, acceleration, dynamic positioning, and other high-power operations. “The marine battery system is capable of discharging energy much faster than traditional batteries,” Watson said. “This enables the system to deliver instant torque and crucial stabilization when operators need it.” In a hybrid configuration, the battery can respond to sudden load changes while the vessel’s engines increase power output. “This eliminates the lag that’s ex-

Shore charging

Energy room Cat engines

Generator sets

Battery system

Main power

Onboard power

LFP, liquid-cooled

Power electronics and controls Battery management, energy management WorkBoat illustration

Watson noted that fully electric installations are generally easier to incorporate into new vessels than into existing boats because of the space, weight, cooling, and electrical requirements associated with a marine battery system. “It’s typically challenging to install a fully electric power system as a retrofit,” Watson said. Caterpillar is urging operators to consider future propulsion requirements while designing new vessels, even if they are not prepared to transition immediately to fully electric propulsion. “We’re advising operators that a modest capex investment when building a new vessel can provide long-term flexibility,” Watson said. “As operators plan for newbuilds, we’re seeing a growing number incorporate fully electric 100% marine battery-powered systems. However, many operators are continuing to incorporate hybrid powertrain options in newbuilds to allow them more flexibility.” Retrofits could still allow operators to lower ownership costs and extend the useful lives of existing vessels, Watson said. Each potential project, however, requires a review of the vessel’s design, configuration and operating profile. “Given operators’ substantial investments in their existing fleets, retrofits enable operators to achieve a lower total cost of ownership and maximize the ROI with their current vessels,” Watson said.

Propulsion Motors, clutches, shafts

Caterpillar’s “energy room” concept ties engines, batteries, generators, electric motors, and controls into one integrated system.

perienced with conventional systems, and it enables main engines to ramp up without risking a blackout,” Watson said. Each battery module is sealed, and its liquid-cooling circuit is isolated from the module’s interior. The system also incorporates leakage detection. Caterpillar’s battery management system continuously monitors cell and module temperatures, charge levels, and battery health, Watson said. “Our battery module is liquid-cooled to maintain optimal cell temperatures and protect battery health during highpower maneuvers,” Watson said. The rackable configuration allows Caterpillar to tailor the number and arrangement of modules to a vessel’s power requirements and available space. Although a 1C rate means a battery can

be charged in about one hour, actual charging times will depend on the installation and available charging capacity. “The Cat Marine Battery System supports efficient charging with a 1C charge and discharge rate,” Watson said. “With this technical specification, a battery could be charged in approximately one hour, depending upon specific configuration and vessel requirements.” Caterpillar is designing the systems around vessel drydock schedules, with battery replacement initially targeted at intervals of approximately five years, followed by 10 and eventually 15 years as the technology develops. “Correctly matching a battery to how a vessel is actually operated and its specific application is key to maximizing battery life,” Watson said. “We’re

Proud to lead in life safety, by land and sea.

www.workboat.com • DECEMBER 2026 • WorkBoat

Request a quote:

pyebarkerfs.com 53


BOATS & GEAR Batteries designing these systems to align with vessel drydock cycles, with replacement targeted at roughly five, then 10, and eventually 15 years.”

SERVICE AND CERTIFICATION The system is serviceable at the module level. Fuses, contactors and electronic control modules can be serviced onboard by qualified technicians with specialized training and tooling.

“The battery system is serviceable at the module level, with spares such as fuses, contactors, and ECMs serviceable onboard,” Watson said, referring to electronic control modules. “The Cat Battery Management System, combined with add-on telematics, provides monitoring, alerts, faults, and prognostics that help operators plan service events and minimize downtime.” For hybrid vessels, using batteries to

Koden's new Information Display System consists of a series of small screens that connect in a strip above a boat's windshield, keeping key information easily visible.

Steiner Shipyard is a full service, 4th generation family-owned shipyard, who is ready to meet all new construction, repair, and conversion needs with ourr NEW 600 6 ton Travelift.

(251) 824-4143 | www.SteinerShipyard.com 54

manage variable loads can allow engines to operate closer to their most efficient range, reducing fuel consumption and engine wear. “For hybrid systems, operating the combustion engine in its optimal range reduces wear and fuel consumption and extends engine life, which factors into hybrid payback,” Watson said. Watson said the system meets international electrotechnical performance and safety standards as well as EU design standards. Caterpillar is also pursuing approvals from the major marine classification societies. “We’re also targeting compliance with ABS, DNV, BV, RINA, and Lloyd’s [Register],” Watson said. Caterpillar has not opened a public order book for the system. Operators interested in pilot projects or early applications are being directed to their Caterpillar Marine account managers. Watson said commercial marine charging and hybrid systems remain largely customized, but he expects greater standardization as adoption increases. “Hybrid systems are still in a custom phase,” he said. “Over time, more standardized production options will emerge, as they did with conventional engines.” Caterpillar expects batteries to form one component of a broader marine energy mix that includes conventional engines and engines capable of operating on lower-carbon fuels such as biofuels and methanol. “Given the broad range of operating conditions, variances in fuel availability by region and vessel operator goals we encounter, Caterpillar Marine anticipates a multienergy future for workboats,” Watson said. “Flexibility is key, which is why we offer a comprehensive suite of solutions from combustion engines that can operate on lower-carbon-intensity fuels (including biofuels and methanol) to hybrid powertrains to fully electric power systems.” “No single solution fits every vessel, which is why we customize each power system to be ideal for not only the vessel but also how it’s operated and its purpose,” he added.

www.workboat.com • DECEMBER 2026 • WorkBoat


Castrol Seamax. At your dock. Modified by AI

Castrol marine lubricants, available at all Stone Oil locations and by barge, along the Gulf Coast, including New Orleans and the Port of Houston.

Order at your dock: 504-366-3401 | stoneoil.com Or contact Castrol directly: 1-800-831-1882 | MarineUSA.Orders@castrol.com


BOATS & GEAR Transmissions

Gearing Up Marine equipment evolves to support hybrid propulsion, electrification, and autonomous vessels.

A Twin Disc transmission installed in-line between the engine and propeller shaft.

V

essel propulsion is evolving as operators move away from diesel and in many cases toward uncrewed vessels. Transmission designers are working hard to keep up. “There are some broad trends impacting transmission design and development efforts at Twin Disc,” said James Bukacek, the company’s global product manager for marine and electronic controls. “I would bucket them in two main areas: Keeping up with the electrification trend and system integration for remote-operated.” In simple terms, a transmission harnesses the power of an engine to suit the needs of the propeller or waterjet. Many refer to a transmission as a gearbox or reverse gear. With conventional gas and diesel engines, the transmission provides the means to reverse the propeller’s rotation. Electric motors can be reversed easily, so transmissions for those applications can be simplified.

56

PLANNING AHEAD Bukacek said that Twin Disc’s biggest commercial marine presence is in pushboats on inland rivers, but the company also has transmissions for ferries and fast craft. In 2018, Twin Disc acquired Veth Propulsion, a company popular in northern Europe, and the subsidiary has been making inroads in the North American market. For hybrid and electrically powered systems, Twin Disc is making all of its MGX transmissions “hybrid-ready” for parallel or series applications. A parallel hybrid typically has a diesel engine and an electric motor. Twin Disc’s system uses a clutch in the transmission to shift between diesel and electric power. A series hybrid is based on full electric power, and if there is an internal combustion engine, it is used to charge the batteries that power the electric motor. Bukacek said that the U.S. Navy and certain foreign navies are leading

Twin Disc

By Eric Colby, Contributor

the way in autonomous and remotely operated vessels. The technology could work its way to offshore supply and pilot boats in the commercial realm. “The money is being spent in the military side first, and that’s going to bleed into the commercial side more and more,” he said. One area where parallel and series hybrid systems have been working is ferries that run the same schedule, covering the same distance, and carrying the same load. Twin Disc’s MGH series would be used in parallel hybrid applications, while the MGE would be for series hybrid use. “You don’t need the reversing capability because the motor is connected directly to the gearbox,” Bukacek said of the MGE. “The motor can rotate both directions. The only thing you worry about is lubrication, so we add a bidirectional pump.” Things get a little more complex with the MGH in a parallel-hybrid system. The gearbox is the center of the system, with the diesel input connected as in a conventional installation. The transmission has a master clutch that can disengage the diesel and then run the electric motor in the same way that a power take-off (PTO) is used. Twin Disc plans to introduce a transmission rated for 1,300 continuous-duty hp in the near future and can provide workboat manufacturers with systems that support up to 2,000 hp. For autonomous and uncrewed packages, Bukacek said Twin Disc typically doesn’t provide propulsion controls, but it can if a vessel owner or designer asks for them. “We can still do our propulsion control system and have it interface with an autonomous system if you still want (shift and throttle) levers on a vessel.” With autonomous vessels, one concern with the new technology is how maintenance will be monitored and scheduled. “We have to consider that there isn’t someone there to change an oil filter, for example,” said Bukacek. “In some autonomous applications, we don’t know their use profile, so establishing a maintenance schedule and routine can be challenging.”

www.workboat.com • DECEMBER 2026 • WorkBoat


Transmissions MODERN SOLUTIONS

George Lewis, ZF Marine’s commercial senior manager, said the company’s transmissions are rated for power output ranging from 12 kW to 12,000 kW. For hybrid applications, a diesel engine or electric motor can be the main driver, or it can be used as a generator to charge the batteries through the e-motor connection at the power take-in (PTI). “There are definitely opportunities in full electrification and hybrids,” said Lewis. “As you get into some intricacies of how these systems work, along with changing technologies with batteries, switching systems and control devices, this can get complex. Having the right experts to implement these is key. Our goal at ZF is to make sure we stay up to speed with this technology and our transmission offerings.” He continued, “People ask, ‘Why don’t we just go fully electric?’ Then you get into, ‘How do we charge the shoreside infrastructure and go about

charging the batteries? How do we keep this thing going?’ There are specific use cases of where a fully electric vessel makes sense. “This comes down to the vessel design and operators’ needs. People like the peace of mind of having the diesel engine as backup for a parallel hybrid system, but there is simplicity in series hybrid or fully electric with an ENC transmission.” In ZF parlance, ENC means “electric no clutch,” and it includes a directdriven electric motor paired with the ENC transmission. ZF will eventually have ENC packages rated above 4,000 kW, Lewis said. For lighter-duty applications such as pilot boats and wind-farm support vessels, ZF packages its transmissions in an aluminum case to save weight. They

www.workboat.com • DECEMBER 2026 • WorkBoat

are matched with the appropriate gear ratio for the waterjet or the fixed-pitch propeller (props up to 60" in diameter are available). For heavier-duty applications, such as tugs or workboats used for offshore oil and gas, steel cases are available with a wide variety of offset and deeper gear ratios. ZF doesn’t sell a controllablepitch propeller (CPP) system, but it does have transmissions that work with the technology. “Typically, we offer our nonreversing transmissions and add hye rin draulic components to control Ma ZF the propeller,” said Lewis. ZF transmissions come with a variety of options such as a PTO for hydraulic powerpacks, electric shifting valves, trolling valves, à la carte monitoring kits, mounting systems, and classification options. A gearcase can be remotely mounted or close-coupled to the engine, depending on the needs. In a

57


BOATS & GEAR Transmissions PTI, ZF remote-mounts the e-motor or close-couples it with a hybrid module on a custom-engineered bracket. It attaches the electric motor to the back of the transmission via the third shaft so an operator can control a clutch to engage and disengage the electric power. “We can take upwards of 750 kW, depending on the size of the transmission for an e-motor and then we go as low as 100 kW,” said Lewis. “We are working on smaller units that are still in development.” He continued, “Destroying electric motors is more expensive and more sensitive than a transmission that’s designed to handle the start and stop of the propeller itself. If we have an electric application, we take out the reversing clutch and add in a specialized oil-cooling system to ensure it can go in either direction based on the input with the electric motor. So that’s one avenue. “We still feel like we’re optimizing the e-motor’s capabilities with a reduction gear compared to going direct with an e-motor to the propeller shaft.” Lewis said ZF eventually would have ENC packages rated above 4,000 kW. In September, ZF introduced the 9200 A/V, the latest in its PTI-capable, downangle transmissions. These units also come with shaft-brake capabilities and will include the latest refinement to ZF’s auto-troll system that allows the clutch to slip at 8 to 10 knots at a maximum rpm. This is necessary for dynamic positioning and slow-speed maneuvers. Generation two of ZF’s auto-troll gives an operator five different rpm profiles that help create more predictable lowand high-speed maneuvering. For added control, ZF brings pod drives and thrusters into play when maneuverability is a priority, such as fireboats, towboats, and specialized offshore workboats. These systems can also have the auto-troll system integrated because they have a transmission designed into the top of the unit. Using the engine input, ZF can slip the clutch and use the thruster to maneuver in forward or reverse, all while allowing the engine to run at a higher rpm for FiFi pumps and monitors. 58

vertical-offset shaft design (with the output shaft above the input shaft) and can incorporate close-coupled pump connections with a trapezoidal threaded output shaft. This lets the dredge pump REPOWER OPPORTUNITIES impeller mount directly to the gearbox At propulsion-system specialist Karl output shaft, creating a compact, robust Senner LLC, executive vice president arrangement that accommodates the Chris Senner said the company has seen torque loads associated with dredging. a rise in repower projects. “A major Reintjes is also working on gearboxes consideration is minimizing shipyard for hybrid propulsion, electric drives, time and avoiding extensive modificaand other custom power transmission tions,” he wrote in an email. “We’ve arrangements. Golden Gate Ferry’s new recently supported several repowers vessels will be the first in the U.S. to where custom Reintjes gearboxes were use Reintjes’ Top-Mounted E-Machine engineered to accommodate higher-tier technology. This integrates the electric engines while maintaining the vessel’s motor on top of the gearbox instead of existing propulsion arrangement.” mounting it aft, reducing the overall Karl Senner is seeing more interest installation footprint. in hybrid-ready gearboxes, PTO/PTI Karl Senner is a propulsion-system capabilities, and alternative propulsion specialist with one-stop-shop capabilisystems. The company has specialized ties. An example is the Marauder, the in commercial/workboat applications first in an eight-vessel series constructed for more than 50 years, supporting by Master Boat Builders for Maritime inland towboats, coastal and oceangoing Partners. Karl Senner supplied the tugs, pilot boats, ferries, dredging, and Steerprop SP 450T azimuth propulsion fishing vessels. It has also worked with units, intermediate shaft lines, and main military branches in the U.S., Canada, propulsion control system. and Mexico. U.S. Department of Trans“By taking responsibility for multiple portation–funded projects carry “Buy elements of the propulsion package, we America” requirements. Karl Senner has can work closely with the shipyard and developed compliant solutions, as demother stakeholders throughout the deonstrated on new Golden Gate sign, installation, and commisFerry vessels under construcsioning process,” wrote Senner. tion at Mavrik Marine. The company supplies and Within these marsupports equipment kets, Karl Senner has from Steerprop and a strong presence in Berg Propulsion for high-speed vessels. The azimuth thrusters and Reintjes WAF series of CPP systems. Electrificatransmissions is one tion and hybrid propulof Karl Senner’s most sion are potential areas of widely used in the workgrowth, and the company has boat market, followed by the worked on more than 300 appliC nner LL K arl Se lightweight WVS series for cations in diesel-electric, hybrid, high-speed boats. Both product PTO/PTI, and fully electric. lines cover a broad range of horsepower For hybrid applications, Reintjes ratings, gear ratios, and vessel styles. offers PTO/PTI-capable gearboxes and Beyond propulsion systems, Reintjes integrated hybrid propulsion packages manufactures gearboxes for dredging, that let electric motors and generators pump drives, PTO/PTI arrangements, work in concert with diesel engines. For and other mission-specific applicafully electric power, Reintjes developed tions. An example is the RDG/RDGL the EVS, EF, and AF series of gearboxes series engineered specifically for that include directional operation and a dredge pumps. The gearboxes have a range of input speeds.

Transmissions can also be used to run individual pieces of equipment such as large water pumps in the dredging and agriculture markets.

www.workboat.com • DECEMBER 2026 • WorkBoat


Seatrax Seatra r x Marine Cra ra Cranes r nes ra Pow Powering owe ow wering the Future r of Maritime re Lifting Lift f ing ft

+ Marine cranes in ev e every very configuration: pedestal, portal, ve port r al, rt knuckle boom and ram luff luffer ffe ff fer offshore, ports, + Operates Operates in in off o ffs ff fshore hore, port p ort rts, shipyards shipy shipy pyards ards and and marine marine construction manufactured + Built and manufa f ctured in the USA fa + Engineered fo fforr reliability in harsh environments + Headquart Headquarted r ed in Houston Texas, rt Tex Te exas, with locations in Louisiana and United Kingdom

www.seatrax.com www. wseatrax.com w.


FOCUS The Great Loop

Up to the Challenge Cancer survivor circumnavigates eastern U.S. to raise money for pediatric cancer research. By Eric Colby, Contributor

W

hen Capt. Scott “Red” Flowers set out in his 30' Velocity powerboat this summer, it marked his second time tackling the Great Loop for a good cause. Flowers’ first Great Loop Challenge was in 2024, and both then and now, Flowers traveled the all-water route around the eastern United States and parts of Canada to raise money for the National Pediatric Cancer Foundation. 60

CHALLENGE DEFINED Boaters traveling the loop — or “loopers,” as they’re known — can choose any starting point, but they typically travel counter-clockwise, motoring up the East Coast then taking the Erie Canal to Lake Ontario. Some boaters take the Hudson and Rideau rivers and the Chambly Canal to the St. Lawrence Seaway toward Lake Huron and Lake Michigan. Still others take

a longer route to the Great Lakes by passing Nova Scotia en route to the St. Lawrence River. From the Great Lakes, loopers enter the Illinois Waterway at Chicago, then make their way to the Mississippi River. At Cairo, Ill., boaters have to make another choice. They take either the Ohio River to the Tennessee River and the Tennessee-Tombigbee Waterway to Mobile, Ala., or the Mississippi River to New Orleans. Once on the Gulf Coast, boaters use the Gulf Intracoastal Waterway to reach the Florida panhandle, completing the Loop by going around the tip of Florida or the Okeechobee Waterway. In the first Great Loop Challenge in 2024, Flowers used a 28' Canyon Bay center console powered by a 400-hp Mercury V10 outboard. He and his team covered about 6,000 miles in 19 days, 19 hours, and 50 minutes and raised about $500,000 for the Pediatric Cancer Foundation. For the 2026 edition of the challenge, Flowers upped the ante in terms of

www.workboat.com • DECEMBER 2026 • WorkBoat

Honda Marine

The Portā Dark:30 Velocity, wrapped in Great Loop Challenge and sponsor graphics, runs during the 2026 Great Loop Challenge.


The Great Loop

THE TEAM Fortunately, the semiretired fishing guide and former Florida Power & Light line worker was partnering with some of the marine industry’s sharpest minds in terms of impact mitigation to ease the wear and tear on him and his boat team. When Flowers left DeLand, Fla., on Aug. 8, his team included Scott Portā, founder of Portā Products, and Jim “Slim” Berns, vice president of operations at Sharrow Marine, which makes ribbon-style propellers. Within a few hundred miles, though, the exhaustion of working around the clock to prepare the boat caught up with Portā, who became violently seasick. Flowers navigated into a port near Beaufort, S.C., where he propped up Portā in a chair on dry land and nursed him back to health with sips of Gatorade. From there, Portā wound up driving himself back home. Before Flowers and Berns arrived at a stop in Wilmington, N.C., Flowers

Honda Marine

distance and money raised. He added the leg that took the team around Nova Scotia, which increased the length to more than 7,000 miles. Flowers completed this year’s loop, officially called the 2026 Great Loop Challenge Powered by Honda Marine, on Aug. 30, traveling 7,300 miles in 20 days, 18 hours and 38 minutes. During the journey, Flowers estimated, “Half was bad weather. Nova Scotia was beyond a shadow of a doubt the worst. The temperatures were in the 40-degree range, and we were freezing.” Capt. Scott “Red” Flowers (second from right) and members of the Great Loop Challenge team pose with supporters during a stop in Tampa, Fla.

called Ian Johnston, a founding member of the Mythic Group, which makes large-scale, 3D-printed products. Johnston is a longtime industry veteran who has made multiple ocean crossings, sailed countless hours at night, and is an electronics wizard. Johnston joined the team in Wilmington and finished the trip. While Portā didn’t finish the Great Loop Challenge on the boat, he was integral to the endeavor nonetheless. After Portā committed to the project, he used his connections in the marine industry to provide Flowers’ team with state-of-the-art equipment in shock mitigation and G-force reduction. Portā put his custom running surface on the 30' Velocity boat powered by twin 350-hp Honda outboards mounted on a Portā Products hydraulic outboard transom bracket. The Portā Performance bottom

has been proven in offshore racing to reduce impacts by an average of 1G. The boat was also outfitted with a custom version of Seakeeper’s Ride system, an automatic ride-control product that constantly adjusts the boat to compensate for pitch and roll. “We took a high-speed bottom that is extremely responsive and requires 110% focus for a half-hour race and made it easy to manage and capable of carrying an extra 2,800 pounds of fuel, 1,500 pounds of gear, the T-top, and electronics,” Portā said. Hefring Marine provided AI-assisted support tools that let the crew assess sea state, vessel response, and routing in real time. The team could also download data after a leg of the run to track how the boat handled the conditions. For improved navigation, Tocaro Blue’s ProteusCore mixed machine learning

SYNCHRONOUS MOTION PRECISION MOVEMENT ELMSD SYNC-DRIVETM BATTERY-POWERED MACHINE SKATES Acheive synchronized tandem motion control with two or more E-Movers which communicate and operate as one coordinated system. Simplify complex heavy-load movements with precise positioning and controlled transport through confined industrial environments.

www.workboat.com • DECEMBER 2026 • WorkBoat

VISIT ENERPAC.COM

61


FOCUS The Great Loop with traditional radar for improved driver awareness and identification of objects on the horizon.

Honda Marine

The Portā Dark:30 Velocity was built in Florida. Velocity Powerboats in Sanford supplied the 30' performance hull, and Scott Portā of Portā Products in New Smyrna Beach customized it.

to the console. They were drilled and tapped to hold down the structures for the hardtop, seat boxes, and console. McCormick and his team seamlessly integrated the system into the hull. Aluminum tabs called “tombstones” extended from the stringers up through the ladder bars to lock the seat bases, hardtop stanchions, and the console into position. Portā then turned his attention to the boat’s bottom. Using Awlfair compound applied to the bottom after it was covered in

Twin Honda BF350 outboards power the Dark:30, mounted on a Portā Products hydraulic outboard transom bracket.

62

AkzoNobel primer, Portā reworked the bottom to reduce drag that causes harder hits and impacts in waves and improve the efficiency of water flowing down the bottom from bow to stern. “The Seakeeper Ride took care of the rest,” he said.

POWERFUL PHILANTHROPY When Portā approached Honda Marine’s division director, Joshua Matthews, about the outboard manufacturer participating in the Great Loop Challenge, the decision to get behind the effort was an easy one. The company has a history of philanthropy, and its engines have proven themselves for decades as the power of choice for the United States Coast Guard. Honda Marine believed in the challenge so much that it became the primary name-in-title partner of the 2026 Great Loop Challenge. The engine manufacturer supplied the two engines — Honda BF350s — on the Dark:30 plus spares and support along the route. Oil and gear-lube changes were performed at Portland Yacht Services in Portland, Maine, and at Dubbert’s Pro in Port Clinton, Ohio. No other maintenance items, like spark plugs or belts, required attention during the challenge. “The BF350s had been released in 2023 and [the Great Loop Challenge] was an opportunity for real-world testing and a better understanding of

www.workboat.com • DECEMBER 2026 • WorkBoat

Honda Marine

SOLID FOUNDATION Portā has worked with Velocity Powerboats President Scott McCormick for years, and he immediately came to mind when he thought about a boat for the 2026 Great Loop Challenge. Portā won his first offshore powerboat race in a 30' Velocity called Hot Ticket, and he had a cool name in mind for Flowers’ boat. “I wanted to use a 30 because I wanted to call it the Portā Dark:30 Velocity,” he said. The Dark:30 is one-of-a-kind with gunwales raised 8" to allow for the boat’s extra-large rubrail. The infused hull was laid up with Velocity’s race laminate, and it has a 4"-thick transom and a race-proven stringer and bulkhead system. “It weighed 1,100 pounds when it came out of the mold,” Portā said. “You could thump the hull with a 2x4, and it rang like a bell. I wasn’t afraid to build some real beef into the boat.” He built a ladder bar system out of ½"x4" aluminum plate that ran down the center of the boat from the transom


See our hoist in action

LIFT MORE. STORE MORE. SAVE MORE. Mimimize your width, maximize your capabilities. We’ve raised the bar again with our industry-leading, variable width boat hoist. With 5 steering modes and 360° maneuverability, we provide the solution yard managers demand for running efficient operations and maximizing storage access. No other lift works as hard for your work boat. Talk to our experts at the WorkBoat Show.

• • • • • •

Expands/Retracts At Full Capacity Faster Turn Around Times Maximize Storage Space Eliminate Double Handling Greaseless Top Beam Available In All Lifting Capacities

Booth 2132


FOCUS The Great Loop performance,” Matthews said. “The team put their lives in the hands of our engines to get them out of some hairy situations.” Both Honda BF350s encountered propeller strikes, one in the Straits of Mackinac that also damaged the antiventilation plate. The other took place on the Tennessee-Tombigbee Waterway after the prop hit a submerged log. During a stopover in Key West, Fla., Matthews took the boat for a ride, felt only a minor vibration, and gave Flowers his blessing to finish the run.

HAVE A SEAT Perhaps the most impactful products aboard the Dark:30 in terms of direct effect on the participants were the four Ullman Dynamics Daytona suspension seats. Ron Carpenter, president of TMS Group in St. Petersburg, Fla., who previously drove boats for the Navy SEALs, has been at the forefront of

helping the military better understand the impacts that drivers and passengers endure while operating at high speeds. Carpenter and his team are the U.S. factory representatives for Sweden’s Ullman Dynamics, a leading manufacturer of shock-mitigating systems for marine use. He met Flowers before the first Great Loop Challenge when Flowers had already committed to using a different pedestal-style seat in his 28' boat. “A pedestal seat only mitigates vertical impact,” Carpenter said. “If you only mitigate vertical impact, the left hook you don’t see coming is the lateral impact.” For the 2026 Great Loop Challenge, Carpenter put Ullman Dynamics Daytona seats on the Dark:30. Portā then developed a retractable helm that lets the driver extend the steering wheel to sit fully engaged in the seat in what Carpenter described as a “neutral spine position.”

“We want the driver’s arms bent and his head over his shoulders with the natural S curve of your spine absorbing the impacts,” he said. Carpenter also gave the team rollers and elastic bands and taught them how to use the rollers to work on impingements and the bands to stretch in between segments of the challenge.

A SAFER VIEWPOINT Setting out from Cape Cod, Mass., for Portland (Maine) Harbor at night, Johnston took the helm. He set the Teledyne Flir M364C thermal and visible camera system to see out in front of the boat to have a clear view of other boats, navigational aids, and debris. “The M364C is the product that keeps the lights on here,” said Jim McGowan, marketing manager for the Americas for Teledyne Flir and Raymarine. “We sell so many of those

NORTH AMERICA’S LEADING DESIGNER OF ICEBREAKERS. FROM DESIGN TO BUILD, IT’S ALL IN OUR WHEELHOUSE.

64

www.workboat.com • DECEMBER 2026 • WorkBoat


FOCUS The Great Loop cameras to recreational boaters, first responders, commercial boats, and even now for unmanned surface vessels.” The M364C is a two-axis stabilized camera that can remove a boat’s pitching motion from what’s displayed on the screen. It also can hold a heading when the boat turns. Teledyne Raymarine partnered with the 2026 Great Loop Challenge, sponsoring Flowers and his team with state-of-the-art equipment worth about $60,000. The list included two Axiom multifunction displays, a 12" model and a 22" display, with RMK-10 remote control keypads. The Cyclone Pro open-array radar is the same used in many commercial applications, and the CP100 sonar modules and CPT-S transducer provide some of the most accurate depth readings in the industry. The electronics package also included a CAM210 visible light IP unit. For AIS, Raymarine provided a Class B transceiver and an RNS-5 RayNet net-

work switch to help manage the overall system. Flowers said the navigation equipment “was second-to-none” throughout the 20-day challenge, but there were some issues that still took some oldfashioned ingenuity to fix. “We had our bags under the console, and they were bouncing around so much that they tore out the wires under the dash, leaving us with no electronics,” he said.

PERSEVERANCE As of early September, the National Pediatric Cancer Foundation, the beneficiary of the Great Loop Challenge, had received just over $600,000, and Flowers said the challenge is “still open for business” and continuing its fundraising efforts. Flowers, 66, is a survivor of Stage 4 cancer, and he attributed his tenacity and persistence for completing the challenge to seeing kids with cancer fighting through treatment.

Flowers said he is already thinking about the next version of the challenge. Wherever he goes next, Flowers said he will always use an open-cockpit boat. “When the weather turns, and you get wet and cold, all that adds up,” he said. “I don’t want to feel comfort, because when the children are suffering, we should be suffering along with them.” Thus far, Flowers and his team have raised about $600,000 for the National Pediatric Cancer Foundation through the 2026 Great Loop Challenge, and their fundraising efforts continue. The boat was on display at the International BoatBuilders’ Exhibit & Conference in Tampa, Fla., in September. Later, it was set to appear at the Race World Offshore Key West World Championships in Key West, Fla., the first week of November as a pace boat. The Dark:30 will be on display at the International WorkBoat Show, Dec. 2-4 in New Orleans.

YOUR PARTNER ON THE WATER. HELPING YOU NAVIGATE EVERY WATERWAY.

Whether you’re powering an offshore service vessel, a passenger vessel, or an inland pushboat, Louisiana Cat has the right engine for your hard working fleet. We focus on you, the customer, and the reliability, safety and profitability of your business. Let us help you navigate every waterway. Visit us online to request an engine quote for your next project: www.LouisianaCat.com/Marine.

66 WorkBoat Mag 2022.indd 1

2/3/2022 10:44:36 AM www.workboat.com • DECEMBER 2026 • WorkBoat


McDermott Light & Signal

BOOTH 2110 Co-Located with:

Portable Barge Navigation Lights Solar or battery powered barge navigation lights for unmanned barges per UL1104

Solar Marker Lights

1 meter

Dredge Lights

1 to 3 mile visibility for aids to navigation and applications such as buoys, docks, barges, and temporary lighting

Meets 2 mile requirement for marking of dredge pipelines

Regulatory Buoys

Available for all applications

Navigation Lights Platform Marker Lights

*Available with or without lighting*

For vessels greater or less than 50 meters Certified to meet UL 1104 and Subchapter M

Permanent mount LED lighting for bridges, docks, and barges

Certified Portable Anchor Lights Portable and long lasting

Peep (Steering) Lights AC/DC LED Floodlights

Constructed for rugged marine and commercial environments.

Available with AC/DC connection, solar or battery operated

718-456-3606 | www.mcdermottlight.com workboat@mcdermottlight.com


FOCUS Fireboats

The Long Watch of the David Campbell A venerable guardian of the waterfront begins a new chapter.

F

or nearly a century, the David Campbell belonged to the water. The 87'6" fireboat now rests on a purpose-built cradle at the Columbia River Maritime Museum in Astoria, Ore., where it is being prepared as a walk-aboard exhibit. Visitors will be able to move across its broad main deck and, with a docent, descend into an engine room where the original 1927 fire pumps remain in place. The museum hopes to have the vessel open to the public by the end of 2026. “It’s going to be a much more meaningful and impactful exhibit for people when they can physically walk the decks of the fireboat that the firefighters walked for almost 100 years,” said the museum’s executive director, Bruce Jones. “They can touch the railing, they can touch the fire nozzles, they can get eyes on and hands on and really get a sense of what it might have been like to be on this boat on the river.” The vessel reached its permanent home after a working life unmatched by any other piece of apparatus in Portland Fire & Rescue history. Christened in November 1927, the David Campbell remained in service until June 30, 2021. Its story, however, begins before the boat existed.

A NAME CARRIED FORWARD David Campbell was Portland’s fire chief during a period when the city and its waterfront were changing rapidly. A fire68

The preserved David Campbell will become a walk-aboard exhibit, giving visitors access to its main deck and, with a docent, its machinery spaces.

fighter from his youth, Campbell rose through the department and became an advocate for motorized apparatus and fireboats at a time when miles of wooden wharves lined a waterfront that was difficult to reach from land. Portland launched its first fireboat, the George H. Williams, in 1904. Campbell continued pushing for greater protection of the harbor, but he would not live to see the next boat arrive. He died June 26, 1911, at the Union Oil fire after a structure collapsed while he was warning firefighters to get out. “David Campbell was not just another chief,” said Don Porth, a retired Portland Fire & Rescue firefighter and department historian who is also president of the David Campbell Memorial Association. “He was extremely popular in the community and he was a charismatic personality. It was a very political time period, and he always stood up for his people and the citizens of Portland.” In 1913, Campbell’s widow christened a 125' steam fireboat bearing her late husband’s name. Built in Portland by Smith & Watson Iron Works, the first David Campbell could pump 12,000 gpm and served Portland until a new generation of gasoline-powered fireboats arrived in 1927. The original vessel was sold and renamed The Chief, freeing the Campbell name for one of three new fireboats entering service that year. www.workboat.com • DECEMBER 2026 • WorkBoat

Portland Fire & Rescue

The original David Campbell, a 125' steam fireboat commissioned in 1913, carried the name of Portland fire chief David Campbell before it passed to the 1927 vessel.

Portland Fire & Rescue

By Steve Mosco, Senior Associate Editor


Fireboats The second David Campbell, christened in 1927, was built by Baker Construction Co., Portland, Ore., for $103,615.16. The boat was designed for Portland’s particular waterfront, where low clearances beneath bridges and the need to reach fires from the river shaped its profile and machinery.

STILL GOING STRONG The fireboat entered service with Sterling gasoline engines and a machinery arrangement built around moving enormous amounts of river water. Its pumping plant would eventually reach a rated capacity of 14,000 gpm at 150 psi. The vessel changed considerably during its career. A city modernization program led to a major rehabilitation in 1961, when the original Sterling engines were replaced with Hall-Scott gasoline engines. The work also added an aerial ladder and raised the pilothouse, which had originally been kept low to clear downtown bridges.

Another repower came in 1974, and getting the David Campbell to the yard became an adventure of its own. The crew took the fireboat down the Willamette River, into the Columbia River, across the Columbia River Bar, and south along the Oregon coast to Coos Bay, Ore., where the vessel was fitted with Cummins diesels. The open-water trip was miserable for the crew because the fireboat handled poorly in rough seas, Porth said. During the journey, however, they encountered a stranded vessel and made a rescue. “If you can imagine being off the coast of Newport, Oregon, the mid-Oregon coast or something, and here comes the boat to save you, and it says City of Portland on the bow,” Porth said. Through the engine changes and other renovations, much of the original pumping equipment remained. Jones said visitors entering the engine room today can still see the 1927 pumps and their brass identification plates.

ONE STOP SHIP REPAIRS CHARLESTON, SC

“The engine room is just spectacular,” he said. “It runs almost the whole length of the ship. It’s just incredible machinery. All of the original 1927 pumps and the power for the pumps themselves is all the original equipment.” Over the decades, the boat fought waterfront fires and became a familiar presence at Portland’s annual Rose Festival. The David Campbell regularly led visiting naval vessels into port while its monitors threw streams into the air. Its pumping capacity also gave the boat a role in emergency planning beyond individual fires. Portland developed a system that allowed the David Campbell to connect from the river to hydrants serving areas that could become isolated if bridges or the municipal water system were damaged. Porth described the vessel as a “floating hydrant” that could supply water directly from the river during a catastrophe. During a major 1996 flood, the boat’s power was useful in another way. Porth

STOP BY. CONNECT. POWER UP. BOOTH #2305

Walther Electric delivers cables and power distribution solutions that keep marine operations running smoothly.

DRYDOCK@DETYENS.COM

(843) 991-2626 SHIP REPAIR | CONVERSIONS | DRYDOCKINGS

Follow Us @waltherelectric

www.workboat.com • DECEMBER 2026 • WorkBoat

69


NessCampbell used a 660-ton crawler crane to lift David Campbell from the barge before carrying it roughly 40 yards to its permanent cradle.

said the David Campbell could work through a river crowded with debris, broken-away houseboats, and other hazards with enough thrust to capture objects and move them toward shore. Age eventually began catching up with the vessel. Crews found metal components in the pumping system wearing thin. More important to its daily usefulness, the nature of marine response had changed. Rescue calls had become a larger part of the mission, and the David Campbell was slow for the distances crews needed to cover. Porth remembered responding to an emergency at the Interstate Bridge from a station several miles away. “We get in the Campbell and we go full throttle,” he said. “We ran for an hour and still weren’t there. And we got turned back. It just wasn’t fast getting anywhere.” The old boat had nonetheless earned a reputation among crews. Porth said firefighters who worked aboard the David Campbell late in its career considered it unusually dependable because so much of the vessel remained mechanical and repairable. Its twin propellers turned inboard, an arrangement crews told him contributed to its ability to maneuver sideways without modern thrusters. “The Portland firefighters did a thorough job of maintaining that vehicle each and every day of its 93 and a half years of service life,” Porth said.

COMING ASHORE Portland Fire & Rescue began talking with the Columbia River Maritime Museum about preserving the David 70

Campbell several years before the vessel finally made the trip downriver. At first, the timing did not work for the museum. Jones and curator Jeff Smith eventually went to see the boat themselves. “We just fell in love with it right away,” Jones said. “We’ve got to find a way to make this happen. This boat can’t go to the scrapyard.” The museum was planning a larger project around its new Mariners Hall exhibition building, and the fireboat found a place in those plans. The City of Portland transferred the vessel to the museum and provided $300,000 toward the effort. The final cost of preserving, moving, and installing the David Campbell came to about $2 million. Much of the restoration was completed at Diversified Marine in Portland, where the vessel was blasted and coated. Museum volunteers are handling remaining work aboard the boat. Getting the vessel onto land became a marine and heavy-lift job of its own. The museum had seven pilings driven 40' to bedrock and built a cradle capable of supporting the boat in a seismically active area. Before the move to Astoria, the David Campbell was towed from Diversified Marine to Advanced American Construction, also in Portland, where crews lifted it from the water and placed it aboard a barge. The first lift also settled a basic question that had complicated planning for the move. Estimates of the vessel’s weight had varied considerably, but the lift confirmed it at 122 tons. Crews were

Dennis Weis/Portland Fire & Rescue

FOCUS Fireboats also able to test the rigging before sending the boat downriver to Astoria. Once there, NessCampbell Crane + Rigging, Hillsboro, Ore., performed the final pick using the same rigging. A 660-ton crawler crane lifted the David Campbell from the barge, traveled roughly 40 yards, and set the vessel onto its permanent cradle. Using a barge for the final approach helped solve another problem. The David Campbell drew roughly 6½' to 7', leaving a relatively short high-tide window for a direct lift from the water. With the 244,000-lb. fireboat aboard, the barge drew only about 3', allowing it closer to shore and giving crews more time to complete the operation. “It was a technically challenging operation for them to figure out exactly how to do the pick in a way that would be safe,” Jones said. “They did a great job. But it took a lot of planning.” When the remaining exhibit work is complete, visitors will be able to walk the main deck, peer into working spaces, and enter the engine room under docent supervision. Retired firefighters have volunteered to help give tours, connecting visitors with people who understand what it meant to work aboard a fireboat on the Willamette River. For Porth, who has spent years collecting the history of Portland Fire & Rescue and the vessel that bears Campbell’s name, the preservation is also a record of the less visible work that kept the boat alive. He said firefighters typically spend more time during a shift maintaining their station and equipment than they do responding to fires and other emergencies. On the David Campbell, that routine continued from one crew to the next for more than nine decades. “Four or five generations of firefighters cared for that boat and saw it through, passed it to the next generation and made it what it is today,” Porth said. “That’s a really big deal when you do that work every day and you come in on your shift and the shift before you has taken care of things, and you know you’ve got to take care of your things and hand it off to the next shift.”

www.workboat.com • DECEMBER 2026 • WorkBoat


BUILT FOR THE SEA. READY FOR THE SHORE. Dell Pro Rugged Tablets + Havis IP66 Docking Solutions IP66-rated protecion against water and dust Salt fog cer tified for saltwater environments Bright, glove-capable touchscreen for onboard operators Secure, vehicle-mounted connectivity with Havis docking

Booths 344 & 346


IN BUSINESS Stasinos Marine

ALL ON THE WIRE How two brothers grew a 33-boat towing business without getting impersonal. By Ben Hayden, Senior Associate Editor

T

he engines were there. The wiring, the hoses, and the insulation were gone. In 2017, James and Jon Stasinos arrived at the James River Reserve Fleet in Virginia to inspect the first tugboat they had bought, sight unseen, for $10,000 on maxed-out credit cards. The retired 65' U.S. Merchant Marine Academy training tug Growler listed on a government auction site would be the foundation of their towing business. First, they had to get it running. “We walked around the boat staring at the walls for about two hours without

72

talking,” James recalled. They then drove to Harbor Freight for tools. By the time they arrived, they had made up their minds. “We bought this. We have to make it work,” Jon said. “There’s no getting out of this easy.” Nine years later, Stasinos Marine operates 33 vessels from the Great Lakes to the Gulf of Mexico, runs a ship repair yard in Fall River, Mass., employs nearly 200 mariners, and has just landed its first multiyear contract. The brothers still interview every new hire themselves.

ORIGIN STORY Long before they owned a tug, the brothers were finding work on the Plymouth, Mass., waterfront. “We actually started riding our bikes down here when we were 10 years old,” James said aboard the company’s most recent tug purchase, the Jennifer Ann, following a Coast Guard inspection. “They’d give us cash to scrub the boats.” At 14, they split a single deckhand’s day rate when he failed to show. By 19, both held 100-ton licenses and were running Boston ferries. They later

www.workboat.com • DECEMBER 2026 • WorkBoat

Ben Hayden

In less than a decade, James and Jon Stasinos have grown Stasinos Marine to 33 vessels and nearly 200 employees while continuing to interview every hire themselves.


Stasinos Marine captained ferries, crewboats, and workboats in New York Harbor and Boston, and worked for dredging outfits. In 2017, they started their own company while continuing to work full time for two towing operators.

Stasinos Marine

LONG DAYS Getting their first tug back up and running took nearly six months of weekends. Every Friday after work, the brothers drove from Boston to Virginia with friend Eric Russo, an engineer James knew from the Block Island Ferry. They’d arrive around 2 a.m., sleep for a few hours, and work until midnight. Sunday meant more work, then they’d drive back to Boston for their Monday shifts. “Every single weekend,” James said. Russo worked for free. Today, he is the company’s port engineer. Once the tug could make the trip north, it docked ships in Fall River, Mass. Then a New Hampshire power

Stasinos Marine’s newest tug, Jennifer Ann, moves Amrize’s cement barge Ambition northbound on the Hudson River.

plant needed a boat to give divers daily access to its intakes. That job lasted four months. The brothers ran the tug while Russo worked the deck. “It was fun. Honestly, just the best way you can start a company,” Jon said. The earnings from that job went

www.workboat.com • DECEMBER 2026 • WorkBoat

straight into a haul-out at Gloucester Marine Railways, which exposed deep pitting throughout the vessel’s hull. “That was the end of that boat,” Jon said. They sold the tug, and for the next six months, the company had no boat.

73


IN BUSINESS Stasinos Marine BETTING THE HOUSE To buy their next tug, the brothers refinanced their homes and bought the 2,400-hp Megan McAllister from McAllister Towing. “That’s where the company, I think, really became a company,” James said. The 77'x26' twin-screw, renamed Charles James, remains in the fleet. “It was a very sentimental boat for us. That was the boat that made it for us,” he said.

The goal was modest: keep the boat working 60 days, enough to cover their mortgage payments. “We had a really low bar set,” Jon said. If the business failed, they figured they could sell the tug and repay what they’d borrowed. The boat’s first job was secured before the brothers even picked it up. A customer asked if the vessel could be in New Haven, Conn., by nine that night. The brothers offered six the next

ADVANCED SENSING SOLUTIONS

FOR TODAY’S AUTONOMOUS VESSELS.

morning and had work lined up before taking delivery. The brothers remembered buying food at a Walmart in Bayonne, N.J., and ordering four mooring lines before running the tug north themselves. The next day they were offshore lightering a ship. Another job lasting 20 days in Quonset, R.I., followed over New Year’s, then a Boston Harbor dredging job expected to last a handful of days. “We were there a year and a month,” Jon said. “We crushed 60 days.” The brothers bought the Charles James in December 2019. Within months, the pandemic arrived, and their fleet began to grow. Over the next six months, they bought two more tugs from Moran Towing, plus the dry bulk barge Cargo Master. James credits part of the opportunity to Subchapter M, as owners looked to sell older tugs rather than put them through inspection. “A lot of what helped us build this company is Subchapter M,” James said. “It scared off a lot of people.” Finding work took persistence. The brothers called and emailed prospective customers, often getting nowhere. “It sounds easy when you tell the story,” Jon said. “It was tough in the beginning. Just nonstop cold calls and emails.” Gradually, calls became jobs and jobs generated word of mouth.

TOUGH WORK WeatherStation® ACOMMs

MARINE SENSING BUILT FOR WHAT’S NEXT

Visit Us

AIRMAR / GEMECO

BOOTH #854 74

Doppler Velocity Log

Altimeter

Much of that early work was dredging and marine construction, including shallow-water jobs that other operators wanted to avoid. “We kind of got our start by doing things other people weren’t comfortable doing,” James said. Dredging gave a young company months of steady employment, but it wore on boats and crews. “It’s still demanding work. It’s not glorious. It’s hard on the boat. It’s hard on the crew.” One purchase took them to Miami, where they bought a 50'x15'x7', 900hp pushboat, Osprey, that drew only www.workboat.com • DECEMBER 2026 • WorkBoat


3'6" of water. James, Jon, and James’s now-wife, Mary, then a Moran captain, took turns running it north around the clock to get to North Carolina for a job moving 250' crane barges. There, they worked the demolition of the old Bonner Bridge at Oregon Inlet, where a storm two years earlier had overturned and partially sunk the tug, Miss Bonnie. James noted that currents and sandbars on the Oregon Inlet make it “one of the nastiest spots on the East Coast to work.” “There were footmarks on the walls of that boat,” James said, recalling how the inlet’s strong currents and choppy seas tossed the Osprey around. “It was probably one of the funner things we’ve ever done.” Both brothers learned through their own experience and guidance from seasoned operators. “We entered an industry where the people who are big are grandfathers and great-grandfathers,” he said. “To

Ben Hayden

Stasinos Marine

Five Stasinos Marine tugboats undergo maintenance at the company’s shipyard in Fall River, Mass.

have friends who will answer the phone and say, ‘No, you’re doing that wrong, and this is why.’ That’s what makes a difference for us.”

Today, Stasinos boats work the East Coast and Gulf, from Houston to New York, plus Puerto Rico and the U.S. Virgin Islands.

BOOTH 1404 Co-Located with:

www.workboat.com • DECEMBER 2026 • WorkBoat

75


Stasinos Marine

IN BUSINESS Stasinos Marine

Crewmembers aboard a Stasinos Marine tug. The company employs nearly 200 mariners, and many captains started as deckhands and mates.

An assist boat operates from Cheboygan, Mich., and the company hired several mariners from a closed Chicago operator to add Great Lakes knowledge. Through Coastline Transfers, Stasinos also manages two crewboats and a supply boat, including the Les Eldridge, recognized by the International WorkBoat Show’s Significant Boat Awards for its rapid adaptation to offshore wind. Recent purchases include the 109'x38'x15', 4,800-hp tug Stasinos Girls, acquired from Kirby Corp. and refitted at the company’s Fall River shipyard, and the 95'x34' Jennifer Ann. The Jennifer Ann is currently in New York Harbor towing Amrize’s 18,000ton cement barge Ambition as part of a contract that offers something early purchases rarely did: a longer view. “We live in the spot market,” Jon said. It is the company’s first multiyear commitment.

Mobile Welding

Intelligence that adapts to fit-up and part variation in real time.

See the next era of manufacturing at booth 737

path-robotics.com 76

www.workboat.com • DECEMBER 2026 • WorkBoat


Stasinos Marine “We kind of got our start by doing things other people weren’t comfortable doing” — James Stasinos, Stasinos Marine

The company does its refit work inhouse, even when it costs more. “I’m not sure we save any money preparing the boats ourselves. At times it probably costs us more. But what we get out of it is we know our boats,” James said.

PEOPLE FORMULA As Stasinos Marine has grown, the brothers have kept hiring in their own hands. Every one of the nearly 200 employees has interviewed personally with James or Jon, and many captains started as deckhands and mates in the early years. Customers have the same direct access.

“There’s two of us that make every decision,” Jon said. “Every single customer that we work for has a relationship with the two of us. That’s a big part of who we’ll always be.” Both still answer calls at 2 a.m. For James, towing comes down to customer service. “It’s no different than ordering a coffee,” he said. “If we don’t do it with a smile, you’re probably not going to come back.” The brothers apply that customerfirst mindset to their crews, too. Comfort figures into every refit, and the benefits package reflects what the brothers wished they had as young

mariners. The company pays 100% of health benefits for individuals and families, matches 401(k) contributions, and covers travel. “I think it’s part of why we’re retaining good crew,” Jon said. “When I was 22 years old, I wish someone was doing that for me.” James sees the brothers’ responsibility in straightforward terms. “Treat the guys right, treat the customer right, remember you work for them,” he said. “Jon and I work for our guys, too.” Neither brother set out to build a fleet this size, and when asked how many boats would be ideal, James laughed. “People always ask me, what’s the right number? I say one. One would be sweet.” Then he turned serious. “We never planned on being this big. It’s a good bit of fortune, and it’s the people who built it with us.”

HARD-WORKING MARINE TECHNOLOGY YOU CAN TRUST

DryMax® Shaft Seals

DuraCooler® Keel Coolers

Johnson Cutless® DuraBlue® Bearings Composite Rudder Bushing

Visit us at Booth 2929 at the International Workboat Show.

www.workboat.com • DECEMBER 2026 • WorkBoat

77


IN BUSINESS North River Boats

Built to Diversify

North River Boats emerged from years in receivership with a business strategy shaped by survival. By Steve Mosco, Senior Associate Editor

“He said, ‘Look, guys, we’ve got a couple of government contracts here left. Nobody wants recreational boats. We already built too many. I don’t know how this is going to end,’” Hutchings said. “‘My commitment to you is I’ll be the last man standing. I’ll turn the lights out.’” The lights stayed on. North River now employs about 160 people, and the experience still shapes decisions about markets, ownership, and growth. That emphasis on adaptability was not entirely new. Decades before diversification became a survival strategy, North River was born

from a practical response to a specific problem on the water. The company’s story began with Mike Lorenzen building small boats from a barn near the North Umpqua River. “He started in his garage building little, flat-bottom aluminum boats to be able to run those sections of technical whitewater,” said Mike Blocher, North River’s director of sales. “That started off with little outboard prop boats, then they came along with the jets. That grew into bigger jets, then inboard jets, and grew into a business that he incorporated in 1974.”

North River’s Roseburg, Ore., operation supports highly customized builds across recreational, commercial, and government markets.

78

www.workboat.com • DECEMBER 2026 • WorkBoat

North River Boats

B

y 2009, North River Boats had briefly shut down and entered what became roughly three and a half years of receivership. At its lowest point during that period, the Roseburg, Ore., aluminum boatbuilder was down to 23 employees. Regular employees went without raises, management took pay cuts, and all benefits except vacation were stripped away, according to CEO Brent Hutchings. Hutchings recalled what Jay Khan, now North River’s general manager and production manager, told the remaining crew while the company’s future was uncertain.


North River Boats

North River Boats

North River’s production strategy emphasizes custom work rather than repeating the same boat configuration from build to build.

North River Boats CEO Brent Hutchings said diversification became a defining strategy after the company’s years in receivership.

Lorenzen eventually sold the company to Brian Brush, a former law enforcement officer from Medford, Ore. Blocher joined North River in 1999. “We grew quite a bit from 1999 through about 2007, 2008, up to about 1,200 boats a year,” Blocher said. “At that time, we were averaging about 200 jet boats a year and about 1,000 outboard boats. Then, in 2008, 2009, we dropped down to about 50.” After North River entered receivership, investment firm Oaktree Capital Management Inc. acquired the distressed assets while the factory was held separately in its own receivership. Hutchings and Oaktree invested capital to recapitalize the business. Hutchings later bought North River from Oaktree in two phases, completing the acquisition in April 2014.

“That was really significant because it was the first step away from recreational boats and it brought us our commercial and government division,” Hutchings said. “Without those government commercial orders during that protracted downturn, the company wouldn’t have made it. Nobody needed recreational boats when they didn’t know what their future was financially.” This became North River’s operating philosophy. “I’d say it was crucial to the bounce back,” he said. “The company wouldn’t have made it through the downturn without that diversification. It continues to inform our strategy now. If you ask me as CEO and majority owner to state the single most important word about this company, it is diversification.” Recreational boats remain the majority of North River’s revenue, with sales across the U.S., Canada, and international markets. Commercial and government work expands the customer base. “You have to build a company that’s robust to that recurring significant event,” Hutchings said. “Diversification is

DIVERSIFICATION

North River’s 2001 acquisition of Almar Boats brought commercial and government work into a company still heavily dependent on recreational boats.

A SEA OF SOLUTIONS We transform customer needs into integrated lifting and handling solutions worldwide. With our boats and davits portfolio and the new PFM crane range, we continue to support safe and efficient maritime operations.

PALFINGER.COM

www.workboat.com • DECEMBER 2026 • WorkBoat

79


IN BUSINESS North River Boats that solution. I write a quarterly letter to my key staff and board, and I’ve never written one that doesn’t involve the word diversification because it informs everything we do.”

CHANGING MARKET

North River Boats

EMPLOYEE OWNERS

A North River Boats employee welds a component onto a vessel at the Roseburg, Ore., shipyard.

welders to work immediately, along with additional outfitters and riggers. North River also uses workforce grants and employee-referral bonuses. “I think it goes back to the mutual respect and the culture,” Hutchings said. “They stay if they have a friend at work. They stay if they feel like they’re part of a team. I would say that culture is probably the single thing that best helps us retain people. But make no mistake, the two labor pools we draw from, Douglas County and Jackson County, are shallow labor pools with respect to skilled labor. We have the same problem everybody else does.”

North River Boats

North River established an employee stock ownership plan (ESOP) in 2016. Hutchings said the culture needed to support it was already in place, shaped in part by the years employees endured together during receivership. “What I learned is that the best ESOPs looked like an ESOP the day before you announced it,” Hutchings said. “There’s already a strong culture. There’s already mutual respect between management and hourly employees and other administrative employees. You’re already pulling in the same direction, trying to do the right thing.” Shares are allocated over time and vest over six years. “The good news is you’re getting a piece of the company at no cash cost to you,” Hutchings said. “If you stick with the company to retirement, it becomes quite meaningful. The average employee already has over $100,000 of vested owned stock, and we’re just getting started.” For most boatbuilders, finding skilled employees has been difficult. This is also true for North River. Hutchings said the company could put another 15

The Roseburg, Ore., facility supports North River’s mix of recreational, commercial, and government boat production.

80

Blocher said demand remains strong across North River’s main markets, with customers moving toward larger vessels and more sophisticated systems. “We’re seeing a little bit of an uptick in larger vessels,” Blocher said. “We used to really concentrate on that 30- to 35-foot range as kind of a sweet spot, and that’s growing into the 35- to 40foot range. Larger, more complex, more expensive boats with more technology to them. “We’re starting to see demand for other types of propulsion systems, other types of autonomy, other capabilities that are being requested,” Blocher said. “We do a lot of hydrographic survey stuff. We do a lot of pilot boat stuff. We do government patrol. We do fire, quite a few. We’re growing in the fireboat industry and first-responder industry.” Customization remains central to North River’s approach. Hutchings described four company pillars: ride, customizability, quality, and people. “Our perfect customer is the guy or the gal who’s been fishing for 30 years and they know exactly what they want and don’t see it in the market,” Hutchings said. “Come on in. We will make the modifications. It’s painful in manufacturing. It’s much harder than knocking out the same A, B, C model over and over again. “We’re the opposite of a widget factory that’s knocking out the same boat every time,” he said. “That’s not who we are.” North River’s growth still carries the memory of 23 employees and a crew prepared to work until somebody had to turn out the lights. Hutchings has been with North River for 14 years and said the company has not had a layoff during his tenure. For an employeeowned business, he sees stability as an obligation as well as a strategy. “I take that responsibility super personally and super seriously,” Hutchings said. “It reinforces the importance of diversification so that even if we get an even greater recession, we’ll live to fight another day.”

www.workboat.com • DECEMBER 2026 • WorkBoat


IN PURSUIT OF OUR PROTECTION ACROSS OUR OCEANS, RIVERS, AND GREAT LAKES, AGENTS IDENTIFY AND INTERCEPT OFFSHORE THREATS. Ready to chart your course toward national security? Show your tactical skills and intuition at sea as you brave the elements to protect the nation from harm. Operate military-grade vessels to protect America’s waterways through maritime patrols and high-speed pursuits.

GEAR UP AND GO SAFEGUARD OUR WATERWAYS.

JOIN THE TEAM CBP.GOV


IN BUSINESS DeAngelo Marine Exhaust

The Long Run DeAngelo Marine Exhaust pairs new technology with four decades of craftsmanship as it pursues larger shipbuilding programs. By Steve Mosco, Senior Associate Editor

GOING AFTER WORK Montes grew up around DeAngelo, spending summers learning to weld and machine parts and working in the service department removing and installing exhaust systems. By the time Montes moved into leadership, DeAngelo had decades of name recognition among builders, shipyards, engine companies, and naval architects, with customers often carrying the relationship from one employer to the next. “We were a reactive company,” Montes said. “When the phone rang, we’d pick it up. There was no outside sales. There was no business development. It was basically just, this company’s got a great reputation for doing a very niche thing, so there’s always going to be business for us.” Montes and Larry Hawes, a consultant who works with DeAngelo on business development, strategy, and planning, began meeting with naval architects, builders, engine companies, and shipyards earlier in the project cycle. On a production program, Montes said, that can mean contributing design work 82

DeAngelo Marine Exhaust

W

hen DeAngelo Marine Exhaust founder Vincent “Jim” DeAngelo Sr. returned to the company’s Fort Lauderdale, Fla., shop with his wife earlier this year, he got a look at what decades of marine fabrication had grown into. The business that DeAngelo started as a small-scale operation now has an engineering department, automated welding, 3D scanning, and more than 50 employees. Incorporated in 1986, the company is marking its 40th anniversary while pursuing larger commercial and government programs alongside its yacht and service work. “The company was started by Jim Sr., just welding stuff out of his garage, and built into what it is today,” CEO Justin Montes said. Robert Montes, Justin’s father, became sole owner in 2004 and professionalized the operation. Justin has since pushed further into automation and outside business development. Montes still keeps Jim DeAngelo’s old drafting arm and hand-drawn exhaust plans from before AutoCAD. Customers tell him stories about DeAngelo flying out overnight to repair an exhaust system and get a boat moving. For Montes, the challenge now is growing the company without losing the reputation those stories built.

Founder Vincent “Jim” DeAngelo Sr. is pictured with a large custom exhaust assembly, an example of the specialized fabrication work that helped establish the DeAngelo name.

for years before the first purchase order arrives. “When WorkBoat announces Eastern Shipbuilding wins a contract to build multiple vessels, you can’t just call Eastern at that time,” Montes said. “That’s at least two years too late. You’d have to be working with them years in advance.” The Coast Guard’s 154' Sentinel-class Fast Response Cutter showed Montes what that kind of long-term work could bring to the business. DeAngelo landed the contract to manufacture exhaust systems for the Bollinger-built cutters in 2009, after roughly three years working with the yard on design, quotation, and approvals. Montes said the Coast Guard’s original 2008 award to Bollinger included options for up to 34 vessels. DeAngelo has since delivered 67 shipsets and has 10 more on order for the next three years. The work continues after delivery. Montes said DeAngelo designed its exhaust systems as kits that can ship worldwide, speeding up repairs and replacements. Larger production programs also bring predictability: Hawes said scheduled work lets the company plan engineering time, staffing, purchasing, and cash flow while leaving room for short-notice service jobs. “If you can lay down these bigger contracts into your backlog, now you can plan,” Hawes said. “You can now run the business instead of the business running you.” www.workboat.com • DECEMBER 2026 • WorkBoat


30% BETTER FUEL ECONOMY. 707 FT/LBS OF TORQUE. EXTENDED SERVICE INTERVALS.

VISIT US AT THE INTERNATIONAL WORK BOAT SHOW BOOTH 3575.

LEARN MORE. coxmarineoutboards.com


IN BUSINESS DeAngelo Marine Exhaust

DeAngelo Marine Exhaust

Montes learned in 2022 that volume alone doesn’t guarantee a healthy business. He pushed sales hard, the company ran well over capacity, employees burned out, and hundreds of thousands of dollars went to excessive overtime. “We had the highest sales year in company history. But we didn’t make any money,” Montes said. The experience made him more selective about new work and more careful to match large projects to available engineering and production capacity. “Saying yes to everything that comes through the door clearly wasn’t going to be a sustainable business model for us,” Montes said.

GIVING THE WELDERS A ROBOT When his father began stepping away, Montes shifted his focus back to DeAngelo, bringing a background in process improvement and automation developed in part at Advanced Waterjet Solutions, the cutting business he started with his sister in 2009. “Daddy, where are the robots?” Montes said. “You got 30 welders out here. I don’t see any robots.” His father warned that putting a robot in front of a veteran welding crew might not go over well. Montes bought a collaborative welding robot, or cobot, anyway. The cobot handles repetitive straight and circular welds, freeing fabricators for the tight bends, unusual fits, and other work requiring judgment. DeAngelo also manufactures its own 14-gauge stainless steel elbows, allowing tighter radii and thinner walls than standard long-radius pipe elbows. Montes said its 10" elbow has a 9" radius and .08" wall, versus a 15" radius and .365" wall for a standard elbow, reducing weight and saving engine-room space. On larger 20"-25" sections used in Coast Guard work, DeAngelo rolls and welds multiple gore patterns to achieve tight radii, saving engine-room space but adding welding. Montes said a section that could take welders up to three days by hand can now be completed in hours with the cobot. Some midlevel welders initially worried about what the cobot meant for their jobs, Montes said. As veteran fabricators and younger apprentices began using it together, employees

A DeAngelo Marine Exhaust welder works by hand on a fabricated exhaust component, reflecting the shop-floor craftsmanship that built the company’s early reputation.

started bringing repetitive work to the machine themselves. DeAngelo now employs the most welders in its history, Montes said. The machine freed up skilled labor, increased production capacity, and helped create work to add people. “Before all the parts come to me, have the cobot perform all the mundane welds so that I can concentrate on fitment, welding the critical sections, and then QC it,” Montes said. The cobot has also become part of how DeAngelo trains the next generation of fabricators. DeAngelo’s low turnover has left it with decades of specialized shop knowledge. Montes said even an accomplished metalworker may need a year to learn marine exhaust fabrication, so the company is developing younger workers alongside its veterans. Entry-level welders can progress from welding to interpreting prefabrication drawings and operating the cobot, eventually combining those skills as lead fabricators capable of building intricate exhaust systems. DeAngelo has also taken its recruiting beyond the shop floor, working with trade schools, technical programs, Junior Achievement, and the Marine Industries Association of South Florida, where Montes sits on the board. The company hosts

FULL-SERVICE SHIPYARD RD OUR SERVICES Shipyard Construction

Your Anytime Maritime Solution

New Vessel Construction Maritime Services Shipyard Services

www.jtmarineinc.com w w w ttm m arriine c o m | 360-750-1300 3 6 0 7 5 0 3 0 0 ww ww w...jjjt jtmarineinc.com ma eiinc c...c co om 36 60 0---7 75 50 0---1113 30 00 84

www.workboat.com • DECEMBER 2026 • WorkBoat


DOWNLOAD THE

MOBILE APP

Use the mobile app to browse our exhibitor list, conference sessions, and network. Apple Store Download:

Google Play Download:

DEC 2 - 4, 2026 / MORIAL CONVENTION CENTER / NEW ORLEANS

Produced by:


IN BUSINESS DeAngelo Marine Exhaust

DeAngelo Marine Exhaust

GROWING WITH PURPOSE

A technician installs a polished exhaust section onboard, bringing the company’s shop-built system into the vessel’s engine room.

monthly student tours to show young people a skilled-trades path that doesn’t require a four-year degree. “If they show up, if they’re on time and they got a good attitude, we’ll take care of the rest,” Montes said. “We’ll teach you how to do everything. You can make a lot of money and take these skills with you wherever you go. But it is hard work, and you do have to get involved.”

Reliable Inspection ROV Systems

RL-500

ROV-1500

Commercial Vessel Design Experts

Our Core Purpose... is to Create.

naval architects marine engineers

(401) 253-4318 bristolharborgroup.com

Over 40 years specializing in Subsea robotics, lighting and Cameras solutions

At Outland, we are committed to delivering reliable, high-quality ROV and/or dive equipment to customers worldwide. Need a custom solution? Our team of engineers and sales professionals are ready to design the perfect fit for your needs

Automation at DeAngelo now extends beyond welding. The company uses 3D scanning to measure engine rooms, design systems, and check finished fabrication against digital models. Montes described a recent megayacht project involving a large diesel particulate filter system. Under the old process, a crew could spend a day removing the existing exhaust so an engineer could take hand measurements, then reinstall it while drawings were developed and remove it again when the replacement was ready. This time, DeAngelo flew a team to Ireland to scan the engine room in advance, and fabrication was underway before the vessel arrived. Montes said downtime that might have stretched to about three weeks could shrink to roughly a day. The digital model can also be used to check large systems running through decks and bulkheads before they leave the shop. The investment in technology and capacity comes as another opportunity takes shape in shipbuilding. With decades of Coast Guard and other government work behind it, DeAngelo sees the current push on shipbuilding as a chance to grow, though Montes does not assume the window will stay open indefinitely. “Now that this administration is throwing all kinds of money at shipbuilding, it’s like this is the time,” Montes said. “You know how hard it is to get momentum? Once you have it, you need to ride it.”

booth # 2651 naval architects marine engineers marine surveyors (281) 532-2080 shearer-group.com

Visit Outlandtech.com

Contact Outland: Sales@outlandtech.com 985-847-1104

86

www.workboat.com • DECEMBER 2026 • WorkBoat


2026 IWBS/UI Exhibitor Listings

Showtime T

he 46th edition of the International WorkBoat Show will take place Dec. 2-4 at the Morial Convention Center in New Orleans. The event will feature more than 1,100 exhibitors showcasing their products and services to tens of thousands of maritime professionals. The conference program, curated by the WorkBoat editorial team, is open to attendees and exhibitors, with both free and paid sessions available. Main Stage and Groundbreakers sessions in the exhibit hall are free to all attendees, while classroom sessions require an upgraded pass. Classroom tracks cover shipbuilding and repair; government and military; passenger vessels and ferries; and tugs, towboats, and barges. On Wednesday, Dec. 2, sessions will include the “Women in Maritime Summit: Technologies Reshaping Maritime Careers & Operations,” as well as “Defending the Jones Act: What’s at Stake for American Maritime.” WorkBoat’s 2026 Boat of the Year will be announced on opening day, at the Significant Boat Awards & Happy Hour, sponsored by Travelers. On Thursday, Dec. 3, the day will begin with WorkBoat’s Maritime Breakfast: “Taking Hold of the Great American 88

Doug Stewart

The 46th International WorkBoat Show. Shipbuilding Opportunity,” featuring keynote remarks from Maritime Administrator Stephen M. Carmel. A full slate of conference sessions will follow, including a fireside chat with the U.S. Coast Guard’s Rear Adm. David Barata, “Ferry Electrification at Scale: Lessons from Puget Sound,” “Keeping America’s Waterways Moving: Investment, Innovation and the Future of Dredging,” and many more. On Friday, Dec. 4, attendees can look forward to popular sessions led by representatives from the U.S. Navy and U.S. Coast Guard, including a spotlight on Military Sealift Command with its commander, Rear Adm. Benjamin Nicholson, and an update on Coast Guard boat acquisitions. For the fourth consecutive year, the WorkBoat team, in collaboration with the Association of Diving Contractors International and the ROV Committee of the Marine Technology Society, will host Underwater Intervention alongside the WorkBoat Show. The event will feature its own exhibit space and a multitrack technical conference program focused on underwater technology and innovation. For more information, visit workboatshow.com. www.workboat.com • DECEMBER 2026 • WorkBoat


Honda. Because Your Business Runs On Reliability. At Honda, we understand that commercial and government outboard applications demand professional-grade performance. For more than 60 years, Honda Marine outboards have delivered reliable, hardworking, fuel-efficient power for boats and crews that depend on our products day after day, job after job, year after year. Backed by Honda’s legendary quality, commercial and government warranties, element-defying Honda corrosion protection, and a nationwide network of servicing dealers, Honda outboards keep your business going strong. Any time, any task, anywhere. Learn more at marine.honda.com.

Visit us at International WorkBoat Show Booth# 3275 For Honda Marine warranty information, visit marine.honda.com/support/warranty. © 2026 American Honda Motor Co., Inc. Always wear a personal flotation device while boating and read your owner’s manual. All Honda outboards meet EPA and CARB emission levels.


Co located with

2026 IWBS/UI Exhibitor Listings Exhibitor Listings

*Exhibitor list is subject to change. For the most updated list visit www.workboatshow.com

1st Choice Restaurant Equipment &

Appleton Control Systems

952

Blue Water Desalination

Supply LLC

1002

Appleton Marine Inc.

1842

Blueye Robotics

2M Oilfield Group

2843

Aqueos Corp.

BMT

1611

30° NORTH

4064

Arbor Metals Inc.

3154

Boat Lift

2552

360 Coverage Pros Mariner

UI-4509

2963 UI-4316

Arc Boat Company

4009

Boats & Harbors

3967

1552

Archway Marine Lighting

742

Boerger LLC

4043

360X Staffing

949

Arges Marine

2312

Boksa Marine Design Inc.

1605

3R solutions

3523

Armada Systems Inc.

4Marine

555

Arrowhead Winch

AAA United States Inc. Abance Engineering ABB

Liability Insurance

Boll Filter Corp.

220

908

Bollinger Shipyards LLC

1929

3364

ASCOM / International Boatlift Exchange Inc.1511

Böning Ship Automation

3801

1455

Ashtead Technology

BorgWarner

4116

829

AST Reygar

3529

Bostrom Co Inc

1705

Abbott on Call

3472

Atekro

3752

BPS Ultra Sonic anti fouling system

1113

ABS & Affiliated Companies

1421

Atlas Incinerators

2033

Brackley Electric

2349

Accumulators Inc.

4357

Atlas NextWave

2637

Brad Foote Gear Works Inc.

365

AccuTrans

2753

Aurand Manufacturing & Equipment Co

3253

Brass Works Inc.

3146

Action Stainless

2762

autoLOTO

4466

Breakwater International

2562

Adria Winch

3764

Auto-Maskin LLC

3609

Bristol Harbor Group Inc.

2651

Advanced Control Systems LLC

4048

Autronica Fire and Security AS

1105

Britmar Marine Ltd.

1561

Advanced Copper Alloys

3738

Avantis Group

550

BRIX Marine

1918

Advanced Flow Technologies Americas

2137

AXEL

4449

Broco

Advanced Mechanical Enterprises

2236

AXYZ Routers and WARDJet Waterjets

3937

BroCoTec

AdvanTec Marine

3929

AYRES Composite Panels USA LLC

2538

Bronswerk Group

1610

AEGIR-Marine

719

B & G Industrial Machine

3943

Brownell Boat Stands

4100

AEP Sales LLC

841

Bachmann electronic GmbH

2637

Bruce S. Rosenblatt & Assoc. LLC

2448

AER Supply

1621

Backbone Coffee

3852

Brunswick Corp.

3481

Aevex Maritime

3954

BAE Systems

1229

Brunvoll AS

3219

AFC Aerospace & Defense

1604

Baker Marine Solutions

Ahead Sanitation Systems Inc.

1761

Bardex Corp.

Air Products Membrane Solutions

1709

Airgas, an Air Liquide company

358

AIT Coatings

3352

AJ's Power Source

4037

Aksisfire

1637

BAUER COMPRESSORS INC.

Alabama Shipyard LLC

229

Bay Ship & Yacht Co.

Alatas Americas

1154

All American Marine

2010

Allendorph Specialties Inc.

335

Bay-Tech Industries Inc.

Allied Marine Crane

2015

Becker Marine Systems GmbH

3219

C.G. & J. Heat Transfer

4362

Alu Design & Services

1637

Beckhoff Automation

253

C.R. Encapsulation Ltd.

UI-4409

Amalga Composites

UI-4436

Beier Integrated Systems

1829

Cadmatic

1410

Amalgamated Inc.

3560

Beluga Strategy

3943

Cal Poly Maritime Academy

3273

3261

Belzona

1256

Canal Marine & Industrial Inc.

4265

BENCROS s.r.o.

455

Capital Heat Exchanger Equipment Sales

119

2409

Carboline Global

1400 1451

AMECO American Equity Underwriters (The)

UI-4516

UI-4416

UI-4530

UI-4632

UI-4510 2463

Buck Kreihs Marine Repair LLC

159

3451

Buffalo Pumps

3372

BargeIQ

121

Bureau Veritas Marine Inc.

328

BargeOps

653

Burger Boat Company

2650

Barnacle Systems Inc.

3464

Busch Marine Inc.

652

Batesville Products Inc.

4005

Busung Marine Technologies Co. Ltd.

4149

UI-4443

Butler Heavy Structures

341

1057

Butterworth Inc.

1249

Bayonne Dry Dock & Repair Corp.

419

Byrne Rice & Turner Inc.

1923

Bayou Metal Supply & Manufacturing

3243

C Raymond Hunt Associates

444

C.C. Jensen Inc.

4105

UI-4420

American Metal Bearing Company

457

Berard Transportation Inc.

American VULKAN Corp.

3013

Berg Propulsion - Thompson Marine

3601

Cardinal Valley Industrial Supply

AMERISAFE

1262

Bergan Marine Systems

1629

Carga

3529

Amot

3955

BETA Fueling Systems

3452

Carlisle & Finch Company (The)

2142

Ampelmann Operations B.V.

3834

Beurteaux North America

1352

Carolina Power Systems,

Amphenol TPC Wire & Cable

1953

Big Top USA

2546

a BNS Power company

2206

AMPHERR LLC

4361

bioaqualife

2210

CARTELLO S.R.L.

4129

Ample Marine

1850

BioMax

329

CASTELLINI S.P.A. SOCIETA' BENEFIT

4129

AMPP

4045

BlastOne

1354

Castor Marine

4054

Analytic Systems

1806

Blokland Group

2637

Caterpillar Inc.

2801

Anchor Sandblasting and Coatings LLC

2139

Blount Boats Inc

2340

CatTongue Grips

3909

Anda-Olsen AS

3219

BLÜCHER, a WATTS Brand

2654

Caudwell Marine

4165

Anschuetz GmbH

2755

Blue Raven

1305

CD Services Group

3163

API SOCIETA' PER AZIONI

4129

Blue Skies Drones

Applegate Industrial Materials Inc.

2307

Blue Water Autonomy

90

UI-4243

CEAD Group

4261

2429

Centek Marine

1321

www.workboat.com • DECEMBER 2026 • WorkBoat


Center Lift Inc.

3900

Dead Calm Seas Marine Services

Centerline

2609

Deansteel Manufacturing Company Inc.

1157

EFINOR ALLAIS

Champion Friction Technologies Inc.

223

Deep South Marine Specialties

853

EIVA

Chance Maritime Technologies

UI-4342

Deep Trekker Inc.

UI-4401

UI-4529

EEG Marine

Elcometer Inc.

3735 352 UI-4229 2961

Chevron Lubricants

2029

DeFelsko Corp.

1560

Electronic Marine Systems Inc.

2343

Christie & Grey

2950

Defense Cybersecurity Group

356

Elettrotek Kabel North America Inc.

1553

CIC North America

3265

DEIF

1101

Elevating Boats LLC

2243

CiLab

4149

Dell Technologies

344

Ellicott Dredge Enterprises

554

Cimolai Technology

3037

Dellner Bubenzer | Dellner Hydratech

3629

Elliott Bay Design Group

2239

CIRCOR Naval Solutions LLC

3355

Delta Marine Technik

2856

Ellsworth Ridge Fabrication

3943

City Electric Supply

2563

Delta T Thermal Solutions

3162

Elomatic USA Inc.

1410

Civan Lasers Inc.

3555

Denke Laboratories d/b/a Hascall-Denke

2251

Eltorque AS

1435

2855

Denso Inc.

UI-4320

Emerald Nuclear Inc.

3943

UI-4329

DEPRO AS

UI-4505

Emerson

929

C-Job Naval Architects C-LARs LLC Clarus Networks

155

Derecktor Shipyards

2839

Eminox Ltd.

342

CloudIngest Inc.

354

Des-Case by Timken

3815

Energy Pipe & Supply

3147

CMP Coatings Inc.

3642

Deschamps Mats Systems Inc.

4053

Enerpac

448

CMP Global Ltd.

2352

DESMI Inc.

1156

engines inc.

743

CN-Seamless

3165

Detyens Shipyards Inc.

219

Envirofluid

4249

Coast Marine & Industrial Supply Inc.

1059

DEWESoft

3655

EquipmentShare

153

Coastal Marine Equipment Inc.

429

Dialight

3551

ERAS Group

942

Cobham Satcom

2043

Digital Twin Marine

3717

ERL Inc.

2328

Digital Yacht

3771

ERMA TECH GROUP

1007

Dinnteco America

805

Eutex International

364

Distribution International

1342

EVAC North America Inc.

2033

548

EvoLogics North America

UI-4636

UI-4408

F. Walther Electric Corp.

Coda Octopus Products Inc.

UI-4508

Colonna's Shipyard Inc. / Steel America Coltri Compressors

2246 UI-4300

Columbia Industrial Products (CIP Marine)

439

Distribution Specialists Inc.

ComAp

3757

DITEQ Corp.

Commonwealth Turbocharger Solutions

3809

Divers and Drivers Medical

Compass Water Solutions

1519

Company LLC

UI-4439

Faccin S.p.A.

3043

Conception FG

3365

Divers Supply Inc.

UI-4421

Fairbanks Morse Defense

2107

Conrad Shipyard LLC

2429

Diversified Marine Michigan

3774

Fairlead

2954

Consilium Safety US

937

Diversified Marine Services

853

FallTech

4154

Continental Western Corp.

3948

DLS LLC

3209

Farrell and Norton Naval Architects

1509

Controlled Water Systems

2456

DLS Marine

2350

Fastener Solutions Inc.

3470

Core Group Resources

1052

DMIC - Delaware Manufacturing

FAUN Trackway USA Inc.

3653

Corrosion & Water-Control Maritime BV

2637

Industries Corp.

929

Faymonville Group North America

663

Corrosion Technologies

3561

DMT Marine Equipment

1347

Fechometal USA LLC

3546

Cortec Corp.

244

DNH Speakers USA

3753

Federal Signal Corp.

2860

Cortland International

1443

DNV

628

Fincantieri Marine Group

1729

Corvus Energy

3343

DOCKSTAR LLC

3943

Fire Fighting Systems AS

1637

2329

DOLGO

442

Fire Protection Service Inc.

901

UI-4409

Dometic

705

Fire Rover

3712

Cospolich Inc. CRE

Fabick Technology Services

2305 UI-4400

Creative Systems Inc.

538

Don Hart's Radiator Service Center Inc.

Fireboy - Shoxs

3175

CRMR Technology

337

Hart Heat Transfer Products

3061

First Bank of the Lake

363

Crowley

1337

DONGYANG ENGINEERING CO.LTD.

4149

First Line Technology

Crown Battery

4067

Donovan Marine Inc.

2719

Fisk Marine Insurance Intl.

Crystal Instruments

262 UI-4501

464

DOOWON HIGHSTEEL CO. LTD.

1006

Flagship Marine

CS Unitec

UI-4312

DOT Maritime Administration

1457

Flaretite Inc.

557

CT Marine

2147

DOUBLE WALL LLC

4464

Fleetzero

4115

Cummins

3001

Dr. Shrink Inc.

715

Flexco

1357

Custom Marine Inc.

755

Draeger Inc.

332

Flow Marine Systems LLC

1365

Driveline Service of Portland

2213

Fluid Marine

463

Fluitec International

2353

Customs and Border Protection Air & Marine Operations Cutco Gifting Cygnus Instruments Ltd.

129

DSMS

UI-4209

3572

2560, 3808

DSR Wire Corp

3353

Flushmaster

362

UI-4429

Duguva UAB

3064

Flyability Inc.

UI-4429

DAEJOONG CO. LTD.

4149

Duramax Marine LLC

2929

Forge

DAHEUNG

4149

Dynamax Inc.

3910

Form-A-Tread Company

Daihatsu Infinearth (America) Inc.

1905

Dyson Corp

1211

Forum Energy Technologies

Dale's Welding & Fabricators

1201

e1 Marine LLC

3513

Foshan Jinbaishi Technology Co. Ltd.

3960

Damen

1129

East Park Radiator Inc.

1800

FPT Industrial

1909

Damen Marine Components

1129

Eastern Shipbuilding Group Inc.

3113

Freedman Seating Company

3160

Datrex Inc.

1304

EBI Cranes LLC

2243

FT Wind Sensors

3357

Davi Inc.

1643

Echandia Marine

3770

Fuel Ox

4454

David Clark Company Inc.

956

E-Crane International USA

1748

Fuel Right Global LLC

1660

DCL Mooring and Rigging

1501

ECS

3246

FUNDILUSA - Wingate Marine LLC

1411

www.workboat.com • DECEMBER 2026 • WorkBoat

3949 3053 UI-4517

91


Co located with

2026 IWBS/UI Exhibitor Listings Exhibitor Listings

*Exhibitor list is subject to change. For the most updated list visit www.workboatshow.com

Furuno USA

2229

Headhunter Inc.

3421

Industrial Service Solutions

2337

g360 llc

264

Heartman Co. Ltd.

3662

Infinity - EMA

4104

Garibaldi Glass Industries Inc.

3537

Hefring Marine

656

In-Mar Systems Inc.

Garmin USA

3429

HEIDENHAIN CORP.

1846

Innerspace Corp.

Gastops

3736

Helidex LLC

318

Intecro Robotics Inc.

4015

Gaubert Oil

347

Helm Operations

3529

Integris Composites Inc.

1849

GCS Industrial

4353

Hendry Marine

2139

Intellian Technologies

2943

GE Vernova, Power Conversion

621

Herbert Engineering Corp

1464

IntelliPower, a business of AMETEK Inc.

3855

GEA

1519

HERIANA CO. LTD.

4149

Intercon

1027

Geislinger Corp.

2136

Hexagon

3264

International Chemical Company & ZurnOil 3567

GELAIR / Yacht Spares LLC

2663

HGG Profiling Equipment

1643

International Paint LLC

GEMECO Marine Electronics Specialists

854

Highliner Maritime LLC

343

International Ship Repair &

General Work Products/ Palmer Safety

1954

Hiller Companies (The)

2310, 2315

Generon IGS

2657

Hilliard Enterprises Inc.

3711

International Slipcoat Corp.

3062

Geo Oceans

UI-4639

HJS USA Inc.

2661

International Special Risks

UI-4516

418

Intsel Steel Distributors

3154

Inventech Marine Solutions

3367

Marine Services Inc.

1637 UI-4317

629 2737

Ghostworks Marine

1151

HL Welding Inc.

Gianneschi Pumps and Blowers Srl

4129

HM Recompression Services

Gilbert Associates Inc.

1404

HOERBIGER Safety Solutions

449

INVISIO

454

Gilbert Gilkes & Gordon Ltd.

2508

Holloway

2544

ioCurrents

3856

Gladding-Hearn Shipbuilding

2207

Honda Marine

3275

IOW Group

1519

Glamox Aqua Signal Corp.

2518

Honeywell

2419

IPG Photonics

3843

Glenair Inc.

4109

Hoppe Marine

232

IPLMS

4143

Glendinning Products LLC

1100

Hose Master

1042

Iridium Communications

2043

Global Fire & Safety

2562

Hose-McCann Communications

3319

Irwin Car and Equipment

3361

GlobalTech Motor & Controls Inc.

1901

Houchens Insurance Group

3529

Isoflex Technologies

3608

Glosten

1649

Howell Foundry LLC

4057

ISSAC Engineering & Consulting Ltd.

4149

Goetze Valves NA Inc.

4453

Howmet Fastening Systems

1463

Italian Trade Agency

4129

Goldhofer

2449

Hoyer VMS Group

944

Iten Defense LLC

3646

Graco Inc.

2964

Hug Engineering

2756

ITL Solutions

349

Graebener Inc.

3371

hull shield

4047

ITW ROCOL

3761

Great Lakes Group

2609

Humphree USA Inc.

1205

Ixys

Great Lakes Maritime Academy

1111

Hutchinson Industries Inc.

752

J & A Enterprises

1336

Greaves Corp.

1801

HYCON A/S

J A Moody LLC

1946

Green Marine & Industrial

UI-4637

UI-4408

UI-4504

Hydrasat LLC

3709

J H Menge & Associates LLC

2219

2033

Hydrasearch Company LLC

1243

J&J Maritime Services LLC

3060

Guardian Alert Systems

145

Hydro Dynamics Solutions LLC

2543

JAG Marine Group

433

Guidance Marine

3905

Hydro Group Ltd.

Jamestown Metal Marine Sales Inc.

1823

Gulf Copper LLC

529

Hydro Tech Inc.

Gulf Crane Services

3063

Hydrospace Group Inc.

Gulf Engine & Equipment Inc.

3454

Hypertherm Inc.

Gulf Marine Contractors

2752

Hypervan

Gulf Marine Insurance Brokers LLC

143

Hyspan Precision Products

641

Jetstream of Houston

Gulf Marine Repair Corp.

2139

Hytorc

4456

JFD LTD.

GUMMI

911

iba America LLC

1309

JIULI ROPE CO. LTD.

135

Gunderson Marine and Iron

813

Ibercisa Deck Machinery

3708

JJ&COMPANIES INC.

4143

H.S. Marine Propulsion

2655

ICC Cable Corp.

1301

JMP Corp.

3055

Hägglunds

1300

Icom America

809

JMS Naval Architects

943

HalenHardy

4204

IFP Motion Solutions Inc.

2153

Joe's Septic/Environmental Contractors

4056

Haley Marine Gears Inc.

2423

ikonda GmbH

3523

John Deere Power Systems

3501

HamiltonJet

2819

Illinois Engineered Products

4061

Jotron

1709

Hammond Machine Works Inc.

2864

ILS Ship Design & Engineering

3874

Jotun Paints Inc.

923

Hammond Power Solutions

1801

Imagenex Technology Corp.

UI-4623

JRC Americas Inc.

1843

Harrington Marine

2013

Imenco Smart Solutions

UI-4617

JT Marine

Hatenboer-Water Americas

910

Imperial Machine & Tool Co.

319

JW Fishers Mfg Inc.

UI-4431

Hatteland Technology

2209

IMS group

2001

JWA Rentals LLC

UI-4405

Havis

346

Imtra Corp.

1115

Kadant Unaflex LLC

3772

Hawboldt Industries

819

Incat Crowther

2408

Kahlenberg Industries Inc.

2939

HDI Marine

4146

Industrial Packing & Seals Inc.

3237

KANGRIM Heavy Industries

4149

HDKits - Heavy Duty Kits

3836

Industrial Robotics

149

Kano Laboratories

3961

Equipment Co. Inc.

92

UI-4409 453 UI-4305 4055 UI-4545

JARP Industries

929

Jastram Engineering Ltd.

3142

Jered LLC

1548

Jets Vacuum AS

3219 4255 UI-4239

126

www.workboat.com • DECEMBER 2026 • WorkBoat


Karl Senner LLC

2915

M&D

3952

Military Sealift Command

Kelco Industries

3953

M&D Marine Services

3263

Miller Electric Mfg LLC

729

KEMEL USA

320

MacArtney Underwater Technology

Miller-Leaman Inc.

636

Kent Safety Products

2851

Machine Service Inc.

Kidde-Fenwal LLC

1200

Mackay Marine - Marine Electronics

Kimura Foundry America

242

& Satellite Solutions

2943

MMC International Corp.

1344

King Valve Co.

1048

MACRON Co.

4143

MM-SEAS

1765

UI-4201

Mactech Inc.

UI-4520

Kirby Morgan Dive Systems

UI-4417 2957

3362

MIRATECH

1546

Mitsubishi Marine Engine

2729

Mobile Pulley Works

3129

KISWEL LTD.

4149

Maine Maritime Academy

2660

MobileOps Inc.

2443

Klüber Lubrication

2237

MaK

2801

Modern Dive Solutions LLC

KNUD E. HANSEN USA

718

MAN Engines & Components Inc.

2501

Molex LLC

Kold-Ban International Ltd.

909

Mapei Marine

3545

Montipower Americas

1562

Marathon Spray Booths

265

Moose Boats

3963

4139, 4149

Mareleng

1036

Morelli Boatworks

355

4029

Maretron

1943

Motas Dredging Solutions

256

Kongsberg Maritime

1719

Marine Care

2637

Moteurs Baudouin

3415

Konrad Marine Inc.

2114

MARINE DESIGN AND OPERATIONS INC.

550

Moxie Media Inc.

3543

Korea Steel Co.Ltd.

1006

Marine Engine Controls Inc.

335

MPRC Products LLC

3610

Marine Group Boat Works LLC

1210

MPW Filter Worldwide

3542

3667

MTG

4139

Murray and Associates LLC

3038

KOMEA (KOREA MARINE EQUIPMENT ASSOCIATION) KONGSBERG

Korea Trade-Investment

UI-4616 1801

Promotion Agency (KOTRA)

4143

Marine Log

Kraaijeveld Winches

462

Marine Solutions Inc.

UI-4418

Kranendonk Production Systems BV

2361

Marine Systems Inc.

3101

Murray Ventilation Products LLC

1754

KTR Brake Systems GmbH

3619

Marine Technologies LLC

1529

MYCO Trailers

3473

KUDU RIGGING

2843

Marine Technology Society

4728

MYTEC CO.

4143

KVH Industries Inc.

801

Marine Travelift Inc.

2132

Mythos AI

953

Kwant Controls en Ship Motion Group

2637

MarineBid

4134

NABRICO Marine Products

1001

941

MarineTrans USA LLC

2962

NACOS Marine GmbH

3136

Marisco Ltd.

457

NAG Marine

1755

La Marche Manufacturing Co. Laborde Products

2729, 2829

LAD Services

3829

Maritime & Offshore NL

2637

Naiad Dynamics

1137

Lagersmit by Timken

3815

Maritime Blue

3943

Nance International HVACR

3614

Lake Assault Boats

4070

Maritime Institute / Professional Mariner

2212

NAPA

954

Lapeyre Stair Inc.

3370

Maritime Institute of Technology and

National Energy Equipment

1106

Lara International

4349

Graduate Studies (MITAGS)

553

Nautican Propulsion

228

Lard Oil Company

2353

Maritime Partners LLC

2609

Nauticomp Inc.

1132

Lasdrop Shaft Seals

619

Maritime Reporter and Engineering News

1000

Nautilus Cables

UI-4519

Lay, Pitman & Associates Inc.

3262

Maritime Robotics

3863

Navicom Dynamics

456

Leading Edge Manufacturing

657

Markey Machine

2219

NAVIOPTICS PVT LTD.

2050

LeBlanc & Associates LLC

2519

Marmon Defense, Marine Tech Wire &

Nelson Stud Welding

2453

Leidos Gibbs & Cox

919

Cable and KITCO Fiber Optics

3664

Nemo Power Tools

3957

Libra-Plast AS

1115

Marvel Industrial Coatings

3838

Neohance Inc.

4160

Lidan Marine

3329

MASCO - Miller Air Starter Company

3760

Neptune Flotation

1005

Liebherr USA

348

Massachusetts Maritime Academy

2461

Ness Sea Consulting

3943

Life Saving Equipment

4448

Masson Marine SAS

3743

Net Your Problem

3943

Liferaft Systems Australia

2309

Master Boat Builders Inc.

2511

NetPower

4035

Lignum Vitae North America LLC

451

Mazzella

2754

Netsphere Electronics

2050

Lind Marine

3963

McDermott Light & Signal

2110

NetZero Renewable Solutions

2147

Linde Gas & Equipment Inc.

1143

MCT Brattberg

2842

Newmar Power

2439 1414

Linden Photonics Inc.

UI-4219

MechPro

3901

Nichols Brothers Boat Builders

Liqui Moly

4004

Meco Inc.

3460

NightMaster US Searchlights

Lister Chain & Forge

1501

Melcal S.p.A.

3219

Thermal Cams Refits

Lithionics

2662

Meltric Corp.

2450

NOAA, Office of Marine and

Livorsi Marine Inc.

759

MER Equipment

3943

Aviation Operations

LM Workboats

3571

Mercury Marine

4101

Nor-Am Management LLC

loci

345

Mercury Wire Products Inc.

Logan Clutch Corp.

3509

Metal Shark

1701

Norfolk Bearings & Supply

237

Lonseal Flooring

3471

MetalCraft Marine/Stanley Boats

1716

NorSap

1115

Lopolight

812

Metalphoto of Cincinnati

4016

Nortek

UI-4621

Louisiana Association for the Blind

3461

Metals USA - Plates & Shapes

1505

North American Rescue

UI-4344

Louisiana Cat

2901

Metric Marine Inc.

3545

North Pacific Crane

Louisiana Economic Development

1811

MFE Offshore

4310

North River Boats

LS Cable & System

428

MG

2609

Northern Diver International

Lubriplate Lubricants

2004

MG Energy Systems B.V.

137

Northern Lights Inc.

LUDECA Inc.

3857

MGX Equipment

1652

Northlake Technical Services

458

Lufkin Gears

3309

Michigan Wheel

2037

Norwegian Subsea

1709

Lynden Logistics

1608

Miko Marine US LLC

NSC Staffing

122

www.workboat.com • DECEMBER 2026 • WorkBoat

UI-4533

UI-4217

NORBIT US LTD.

124 2143 900 UI-4500

3647 3280 UI-4442 2529

93


Co located with

2026 IWBS/UI Exhibitor Listings Exhibitor Listings

*Exhibitor list is subject to change. For the most updated list visit www.workboatshow.com

Ocean Equipment

UI-4503

POKO ENGINEERING

Ocean Technology Systems

UI-4411

Polatrak

OceanAlpha Group Ltd. Oceaneering International Inc.

4149 UI-4309

Revcord

2665

RHOTHETA International Inc.

2551

4021

Pole Star Maritime

4000

RIBCRAFT

3455

4060

Polysoude USA Inc.

3523

RICE PROPULSION - VICUSdt

2240

Oceanscan Inc.

UI-4404

Pompanette

957

Rig Haus Corp.

736

Oceanwide Repair Group

UI-4536

Porta Products Corp.

845

RigER Inc.

357

OEG Enviro-Pak

3734

POSEIDON ROBOTICS

4308

Rigidized Metals Corp.

1454

Oil Center Research LLC

2951

Power Dynamics Innovations LLC / Redox

3635

RINA

1448

Oil States

1313

Powerstart Ltd.

3255

Ring Power Cox Marine

3575

Olson Aluminum Castings

2652

PPG Protective & Marine Coatings

2512

Rivertrace Ltd.

2033

Omega Flex Inc.

3956

Precision Brand Products Inc.

4364

RIVIERA MARITIME MEDIA LTD.

907

Omega Thermo Products

3229

Premium Plate

1661

RKI Instruments Inc.

248

OneStep Power Solutions Inc.

336

Prime Mover Controls Inc.

2008

RM Propulsion BV / RM Propulsion

On-Site Health and Safety

4253

Primrose Oil Company Inc.

4164

Thrusters BV

2637

OpenTug

1003

Princetel Inc.

Robert Allan Ltd.

2410

Optimarin As

1709

ProCom Headsets

3849

Rolls-Royce Solutions America

2701

Orange County Thermal Industries

3805

Proesa Electronica

3671

Rose Point Navigation Systems

3050

Orbius

3247

ProfiSeal GmbH

3219

Rösler Oberflächentechnik GmbH

1643

Orca AI

245

Propspeed

1952

Ross Hx

4001

Orca3D LLC

1364

PROTECH Defense

3673

Rottler Manufacturing

3943

Oriental Precision & Engineering Co.Ltd.

4149

PSS Seal / Datum RMS

1235

Roxtec

1415

Orttech

2455

PT Tech Torsion Control Products

3815

ROYPOW (USA) Technology Co. Ltd.

4120

OSWALD Elektromotoren GmbH

4008

Pye-Barker Fire & Safety

3871

Rozema Boat Works Inc.

738

Outfitters International

1447

Quality Metal Works

1919

Rubber Design BV

1336

Outland Technology Inc.

UI-4237

Oxalis Solutions OXE Marine Inc. Oxylance

UI-4313

Quartermaster AI Inc.

165

Rugui Hot Rolled

243

3660

QUIKRETE

2960

Rustibus Worldwide

1136

438

QYSEA Technology

Rutter Inc.

1109

UI-4213

UI-4243

R&M Lumen Electrical Inc.

945

Ryerson

2747

S&SYS Co.Ltd.

1662

OZ Sepa Inc.

4149

R&P Technologies

Padgett-Swann Machinery Company Inc.

2111

R.E. Thomas Marine Hardware

3650

Sabine Surveyors Ltd.

PAE Maritime - PMS300

254

R.M. Young Company

2938

SAFE Boats International

863

R.W. Fernstrum & Company

3229

SafeSmart LLC

1854

PaleBlue

UI-4339

UI-4513

3661, 4149 2557

PALFINGER MARINE

2719

R2Sonic

SAIC

246

PANASIA Co.

4143

RAD Propulsion

3152

SAIM SpA

4129

Panel Components & Systems

1406

Radian Forge

2954

SAMIN E&S Co.Ltd.

4143

Panel Specialists Inc. / Fipro - Thermax

2750

Radio Holland

3720

SAMKUN CENTURY CO. LTD.

4149

Parker Hannifin - Racor

3902

Rampart Products

Parker Village Marine

2033

Passenger Vessel Association (PVA) Path Robotics

Sample Brothers Inc.

639

Rasmussen Equipment | Wire Rope & Rigging,

Samson Rope

2442

3570

a Marine Equipment Solutions Company

2861

Samyang Metal IND. CO. LTD.

1008

737

Rayco-Wylie Systems

4348

Saronic Technologies

3337

Pathfinder Power Solutions

4066

Raymarine

1943

Sauer Compressors USA

1343

Patterson Manufacturing

3329

Reach Systems Inc.

UI-4628

Savox Communications

3675

PDK

4149

Red Cat Holdings

3837

SCANIA

3701

Pearlson Shiplift Corp.

2711

Red Fox Environmental Services

2542

Schaefer Electronics Inc.

UI-4537

Pecora Corp.

3861

Red Stick Armature Works

353

Schaeffer Manufacturing Co.

4038

Pemamek Ltd.

1643

Red-D-Arc

259

Schoellhorn-Albrecht Machine Company

1542

PERKO Inc.

3047

Reel Power Marine & Energy

810

SCHOTTEL

2629

Philadelphia Gear, Power Systems

UI-4518

Regal Industrial Corp.

3939

Schuyler Companies

2443

3815

Regal Rexnord

3870

Schwarze-Robitec America Inc.

2765

Phoenix International Holdings Inc.

3446

Rehlko

2301

Scienco/FAST, a subsidiary of

Phoenix Lighting

1911

Reliable Industries

3029

BioMicrobics Inc.

3621

Photon Marine

1043

RelyOn

2457

Scurlock Electric

1801

Remitite Offshore Shipbuilding & Eng

3721

Sea Foam Sales Co.

3373

Renold Hi-Tec Couplings

2404

Sea Machines Robotics

3765

by Timken

Pilot Marine Products 1743, 1747, 1749, 1848, 1850 Pioneer Industries LLC

1255

Republic Diesel

1055

SEA.AI Inc.

3860

Pipe Cloud

238

RES Energy Solutions

2306

Seaco Industries LLC

3360

Platypus Marine Inc.

1346

Rescue Technology

2332

Seacoast, A GCG Company

1819

PLEUGER Industries GmbH

4467

Resolve Marine

2047

Seadronix

4149

PMAX FILTERS AUSTRALIA PTY LTD.

4465

Reuland Electric Motor Company

2553

Sea-Fire Marine

2813

94

www.workboat.com • DECEMBER 2026 • WorkBoat


Seakeeper

1601

Standing Tide Crew Management

249

The Timken Company

Seal for Life Industries

3563

STAR Center

2760

The Waterways Journal Inc. /

Seas Of Solutions

2813

Star Hydraulics and Pneumatics

654

Inland Marine Expo

1239

Seasats

3864

Starlight Maintenance Inc.

3761

The Whiskey Project Group USA LLC

3562

Seaside Marine International Drug Co.

StationAri Designs

147

The Wing Group

3437

Seaspan

2448

Steiner Shipyard

3408

theMG Co. Ltd.

4149

Seatrax Inc.

1204

STI Marine Firestop

4452

Thermal Structures Inc.

4162

Seatronx

805

Stuwe GmbH & Co.

3153

THG Automation

1261

Seaview

3943

Submerged Solutions and

Thoma-Sea Marine Constructors LLC

519

Seawolf Marine Engineering LLC

446

Consulting LLC: Liberty Subsea Sciences

Thoni Alutec Sp. z o.o.

643

Sennebogen LLC

218

and Liberty Subsea Medical Services

UI-4439

Thordon Bearings Inc.

1429

Separation Equipment Company Inc.

3161

SubNero

UI-4437

Thrustmaster of Texas Inc.

1019

1519

Subsalve USA

UI-4221

Tideman Marine

3780

Subsea Supplies Ltd.

UI-4317

Tiger Cranes

321

3260

Subsea Technologies Inc.

UI-4336

Tiger Lithium Power

2554

Sharrow Marine

845

subsea43

UI-4504

Tiger Offshore Rentals

3129

Shearer Group Inc. (The)

2651

Sumitomo Heavy Industries

1764

Tiger Performance Products Inc.

Shell Marine

3410

Summit Electric Supply, Marine Division

1049

Tilman Solutions

Sherwin-Williams

2537

Summit Marine Fire & Safety

2813

Timco Industries Inc.

2311

Shinkei Systems / Seremoni Fish

4352

Sunbelt Rentals Inc.

1663

TIMETEC Co. Ltd.

4139

Ship Architects Inc.

940

SunSource

4012

TM Marine Services

3780

Ship Interior Systems

1655

SUNY Maritime College

1361

TMC Transformers USA Inc.

1565

Ships Machinery International Inc.

3219

Supero Seiki Co Ltd.

157

Tnemec Company Inc.

3613

ShipServ

3636

Superx LLC

3434

Tocaro Blue

845

Shipwright LLC

3908

Supreme Integrated Technology Inc.

929

Torque Technologies Inc.

263

Shockwave Seats

3474

Sure-Foot Industries Corp.

3755

Total Control Systems

1957

3811

Total Dollar Marine Insurance/

UI-4229

Separator Spares & Equipment SH Group Shandong Rope Technology Co. Ltd.

SIDUS Solutions LLC

UI-4321

3815

UI-4521

UI-4412

Surface Systems Inc.

Foundation Risk Partners Corp.

4010

3911

Total Marine Solutions Inc.

3718

Survival Systems International

1847

Total Plastics

3649

Suspension System Technologies

3943

TotalTek Inc.

4136

Sigma Powertrain

3917

Survey Equipment Services Inc.

Siltec USA Inc.

1554

Survitec

Silver Ships Inc.

3465

Silverback Marine

3775

SIMPLEX AMERICAS - SAM

2561 UI-4343

Suzuki Marine USA LLC

3143

TOTE Services LLC

1460

Marine Propulsion Services

1543

Syncrolift

2146

TOUGH BOATS - indestructible workboats

4371

Sinex Solutions

1247

T.F. Hudgins

133

TowWorks LLC

701

SKF

3443

TAEHWA KALPA SEAL Co. Ltd.

4149

Transfluid LLC

3411

3137

Transhield Inc.

4166

Skill N Depth

UI-4209

TAI Engineers LLC

Smith Berger Marine Inc.

2219

Tampa Deep Sea Xplorers Inc.

SNAME

3773

TANKTECH

3816

Enterprises Inc.

Snow & Company Inc.

1564

Taylor Marine Construction Inc.

247

Travelers Insurance

1951

Solar Solve Marine

1637

TBS Safety Inc.

3554

Trelleborg Gutteling Americas Inc.

2643

3515

T-Drill Industries

238

TriCab USA

948

Team Norway Pavilion

1709

Tridentis LLC

1302

Solberg Crankcase Ventilation Systems Sonardyne

UI-4229

UI-4538

Transport Products and Service 2852

S-ONE M&O Co. Ltd.

4149

Techcrane International LLC

1327

Trimaco

3347

Sonetics

1749

Technical Marine & Industrial

2543

Trionics LLC

3566

Sound Propeller Services

2011

Technology For Energy Corp.

1363

Triple R America

133

Soundown Corp.

1336

Tees White Gill Thrusters

637

Triple Son Wholesale Timbers

1046

South Louisiana Community College

UI-4301

Teledyne FLIR Marine - Teledyne

Tri-Tec Manufacturing LLC

3943

1943

Tritek Power & Automation

4018

Teledyne Marine

1943

Trucordia Marine Insurance Solutions

255

Telnav USA LLC

1011

TRUMPF

3854

Termodinamica USA

1461

TUFFSEA

3574

Terradepth

4114

TWG Tulsa Winch - LANTEC and

452

Raymarine Commercial

Southern Fasteners & Supply LLC

1656

Southern IoT

4018

Southern Marketing Associates

3271

Southern Thrusters

2053

Southwest Research Institute

3643

Texas A&M University at Galveston &

Southwinds Marine & Industrial

4467

Texas A&M Maritime Academy

537

Twin Disc Inc.

SPCK CO. LTD.

4149

Texas Boom Company

2761

UBC Pile Drivers and Divers

Spears Manufacturing Company

1257

The Association of Diving

U-Coat Technologies Inc.

532

Spinlock

1360

Contractors International

4723

Ullman Dynamics USA LLC

756

Sponge-Jet Inc.

1037

The Hamburg Ship Model Basin (HSVA)

3756

Ultratecno

Spraying Systems Co.

4354

The Hansen Group

3054

Ulysses Ecosystem Engineering

Springfield Marine Co / Shark Seating

3670

The Historical Diving Society

Spurs Marine Manufacturing Inc.

1033

The Insurance Center

4366

Champlain Cable

SSI

2601

The Kirkpatrick Group

4036

UMC / Baier Marine

857

St Johns Ship Building

837

The Lincoln Electric Company

1835

UNI:ON

4149

3729

The Maritime Executive

4267

Unipar LLC

3711

The McHenry Management Group

3335

Unique Group

3921

Southern Crane & Hydraulics LLC

Standard Calibrations Inc. Standard Subsea

UI-4438

www.workboat.com • DECEMBER 2026 • WorkBoat

Pullmaster Brands

UI-4205

1704 3201 UI-4528

556 UI-4337

Umbilicals International and 3853

95


Co located with

2026 IWBS/UI Exhibitor Listings Exhibitor Listings

*Exhibitor list is subject to change. For the most updated list visit www.workboatshow.com

Up In Smoke Welding Apparel USA

359

Vector Companies

3171

VinePlant Inc.

4149

US Army Corps of Engineers

3565

Vector Controls Inc.

1163

Viper Wire Rope Lubricators Pty Ltd.

3761

USMMI

2609

Veno Wear

4142

VMI Dredges

3746

V&S Galvanizing

252

Vessel Marketing

3463

Voith US Inc.

1942

VAF Instruments

2637

Vessel Vanguard

3810

Voltari Electric

545

Vaisala

3966

VETUS Maxwell

3401

Volvo Penta

2401

Valkyrie Enterprises LLC

1353

Viasat

2943

Voyis

Valmet

1036

VideoRay

Vance Metal Fabricators Inc.

1264

ViewTech Borescopes

258

VSTEP

2953

Vard Marine Inc.

2119

Vigor Marine Group

443

W&O

1219

Viking Systems

1455

Wabtec Corp.

2129

Wager Company

2743

Wakulla Marine Inc.

2865

VDL Klima bv

2637, 3219

UI-4229

UI-4229

VSC Fire & Security

4161

Walker Marine Design Ltd.

257

Walz & Krenzer Inc.

1563

Wartsila North America Inc.

711

Washburn & Doughty Associates Inc.

1446

Washington Alloy Company Washington Chain & Supply Inc.

1760 1501, 2219

Washington State Department

Marine Finance Forum – New Orleans December 1, 2026 Four Seasons Hotel, New Orleans, USA

of Commerce

3943

Water Linked

UI-4531

WaveWorks Alliance

3962

WCT Marine & Construction

3665

We Work the Waterways

4144

WEB ENGINES LLC

3737

Weld Mount - H.B. Fuller Marine

811

Weldsale

904

Wenaas Workwear

1709

Wesco

2101

WESMAR - Western Marine Electronics

1853

West Gulf Marine Ltd.

2609

Western Dredging Association

3964

Westfalen AG & Co. KG

3523

Wheelhouse Industries LLC

4360

WIELAND FARMERS COPPER

1804

Willard Marine

4355

Wintron Electronics

1113

WireMasters

3664

WONKWANG VALVE Co.

4143

Wooster Hydrostatics Inc.

1102

World Wide Metric

1401

Wozair USA Ltd.

4052

WPT Power Corp.

2201

WRSystems, GeoNavigation

www.marinemoney.com

96

Technologies Divsion

163

Wynn Marine Ltd.

1637

Wynne Marine LLC

1617

Yachtify USA

3475

Yale Cordage Inc.

2054

YANMAR Marine

3401

Yates Cylinders

1253

ZF Marine

2021

Zin Boats | Zin Power

3267

Zodiac of North America Inc.

3375

Zolatone AIM A Division of Klinger Paint Company

436

ZOLLERN GmbH & Co. KG

4152

Zydro Marine

4065

www.workboat.com • DECEMBER 2026 • WorkBoat


PORT OF CALL

We Are HAS IMMEDIATE OPENINGS! Derrick Barge Deck Foreman Leadermen Rigger Derrick Crane Operator Deck Crane Operator Tower Operator Welding Foreman Welder (6 GR Certified) Clerk Chief Engineer Chief Electrician Mechanic Oiler Electrician Steward Night Cook Galley Hand Tug Boat Captain Able Body Seamen QMED/OILER

VANUATU FLAGGED TUG CREWS: Able seafarer deck–II/4 or II/5 Chief engineer—III/3 Able seafarer engine—III/4 or III/5 All deck officers must hold valid Vanuatu GMDSS– General Operator’s Certificate (GOC) (IV/2)

Minimum 2 years offshore experience onboard a derrick barge required. Applicants must have a valid TWIC card.

Growing

LICENSED MARINER POSITIONS ARE AVAILABLE Deck & Engine Personnel

APPLY TODAY www.gandhtowing.com/work/

We’re W We ’rre Hiring! Hirin ng!

Join Our u ur a ! am Team!

ELECTRICIAN N CAPTAINS AB'S & ENGINEERS

Unit Tow Captains Towline Captains Offshore Captains Mate/Pilots Tankerman Deckhands More Information

985-385-4649

Marine Mechanical Marine and/or Structural Designer Apply Now

Email resume to:

jobs@shoreoffshore.com

JOIN OUR TEAM

Join our amazing team!

www./hockema.com/team/careers/

www.centralboat.com

To place a port of call ad! wjalbert@divcom.com

Golden Alaska Seafoods has open positions on the M/V Golden Alaska Wheelhouse positions: Captain, Mate, Purser er Engine Room positions: Chief Engineer,

COMMERCIAL PRODUCT MANAGER

1st Assistant, 2nd Assistant, Oiler, Fishmeal Technician Galley positions: Chief Steward, Cook, Prep Cook, Galley Assistant, Housekeeper Deck positions: Bosun, Deck Boss, Deckhand, d,

Mobro has an opening for Experienced Marine Electrician With Extensive Knowledge Of Marine Electrical And Land Based Systems. Candidate Must Live In The Jacksonville FL. Area Also seeking Captains, Able Bodied Seaman & Engineers. Experience required for inland and offshore East Coast US, Gulf of America & Caribbean. Excellent benefits & competitive wages

Contact Mike Rodriguez (904) 305-2502 mrodriguez@mobromarine.com

Deckhand Trainee Factory positions: Baader Technician, Surimii Technician, Quality Control, Foreman, Factory ory r ry

This role is highly cross-functional partnering with sales, customers, and global suppliers and plays a key part in shaping the future of our product lines.

Send resume to: resume@imtra.com

www.workboat.com • DECEMBER 2026 • WorkBoat

Mechanic, Processor Benefits: Medical, Dental, Vision, 401(k) EOE and Drug Free Company

Please apply online at:

www.goldenalaska.com 97


PORT OF CALL Employment, Equipment & Services

SEEKING QUALIFIED & EXPERIENCED PERSONNEL to work on our subsea construction fleet.

AVAILABLE Master Chief Officer Sr.Chief Officer 2nd Officer Bosum Crane Operator Able Seafarer (Deck) Crane Operator Pipelay Operator Medic Admin Officer Chief Engineer 2nd Engineer 3rd Engineer 4th Engineer Able Seafarer (Engine) Instrument Technician T chnician Te Electrician

POSITIONS

Materials Coordinator Offshore Construction Manager Sr. Offshore Construction Supervisor Offshore Construction Supervisor Offshore Support Field Engineer Deck Supervisor Rigging Supervisor Lead Rigger Rigger Rigger / Welder Chief Pipelay Engineer Reel-Lay Technician Supervisor Reel-Lay Technician Electrical Reel-Lay Technician Hydraulic Reel-Layy Technician Mechanical

Send rresumes to:

Reel-Lay Technician T chnician PLC Te Crane Technician T chnician Te Deck Mechanic HSE Advisor Offshore Administrator ROV Superintendent ROV Sr. Supervisor ROV Supervisor ROV Sr. Pilot Technician T chnician Te ROV Pilot Technician T chnician Te Chef Manager Chief Cook Cook Lead Steward Steward

Send resumes to: : offshorevesselj offshorevesseljobs@technipfmc.com l obs@technipfmc.com lj offshorevesseljobs@technipfmc.com WE ARE HIRING

ALL POSITIONS ABOARD OUR FLEET!

CAPTAINS & MATES LIC. ENGINEERS QMED, AB & OS

JOIN OUR TEAM! Automation Technician Electrical Design Engineer Experienced Marine Electrical Technician

Apply Online n ne To day! TToday! All applicants must possess valid MMC, Medical Certificate and TWIC credential

Apply online:

For Offshore in U.S. Gulf of Mexico TWIC Required

(985)-851-0727

5450 West Maine St., Houma LA 70360

WM RESOURCES STAFFING L.L.C.

APPLY TODAY!

Email: Email: tammy.howell@tesselec.com tammy.howell@tesselec.com

www.dannmarinetowing.com/employment

NOW HIRING!

Cooks & Galleyhands

www.tesselec/com www.tessllc.us/careers/

Seeking Offshore Positions Experienced Utilities, Preps, Bakers, Cooks & Painters for Offshore. Must have T.W.I.C. Miniumum 2 years offshore experience. Must pass drug test. Email Resumes to:

wmresource206@yahoo.com Superintendents Foreman Leaderman Mechanics Crane Operators Barge Clerks

Dive Supt. Dive Supervisor Divers Tower Operators Riggers Welders

Cooks Galleyhands AB/Bosun Dive Tenders SAT Tech Life Support Tech

DO YOU KNOW A RETIRED MERCHANT MARINER WHO COULD USE SOME HELP?

OFFSHORE EXPERIENCE REQUIRED BENEFITS INCLUDES HEALTH, DENTAL, VISION, DISABILITY/LIFE AND 401K MUST BE ABLE TO PASS A PHYSICAL AND DRUG SCREEN

Email Resume: employment@morrisonenergy.com

Apply online at www.morrisonenergy.com EEO M/F/D/V

98

The Sailors’ Snug Harbor charity helps retired career mariners in financial need. Contact us: 646-465-8585

iinfo@thesailorssnugharbor.org www.thesailorssnugharbor.org

www.workboat.com • DECEMBER 2026 • WorkBoat


NOW HIRING

CAPTAINS, RIVER PILOTS, MATES & THIRD MATES

REQUIREMENTS Overnight vessel experience along Inland, Coastal, and Great Lakes regions of the U.S.

Near coastal endorsement BENEFITS Sail aboard America’s newest and fastest-growing fleet with new vessels launching quarterly

Now providing schedules up to 18 months in advance

World-class maritime simulator training Career growth and development, including our Captain’s License Development program

Apply Today 203.215.4716 aclcareers.com Questions? Email careers@americancruiselines.com


PORT OF CALL Employment, Equipment & Services

Seeking Experienced Offshore Personell Utility Hand/Cooks/Housekeeping wanted for offshore work. Rotating hitches of 12 hour days, 28 days on then 14 days off.

https://cardinal.bamboohr.com/jobs

Must have the following: RIG PASS/SAFE GULF HUET MMC BOSIET TWIC

NOW HIRING! As our fleet continues to grow, we are looking for experienced wire boat:

3 yrs offshore utility experience. Applicants will also be required to pass a USCG Merchant Mariner Physical and a USCG DOT Drug Test

WE’RE W E WE’RE W E’’R RE E

HIRING Reliable Fe Ferries. Real Opportunity.

Dann Ocean Towing

Cameron, Louisiana

CAPTAINS CAPTA T INS TA

- Captain - Mates

- Engineers - AB Deckhands

We Offer:  A company committed to safety  Competitive Day Rates  Equal Time Opportunities  Paid Travel

Apply online: www.dannoceantowing.com Email: hiring@dannoceantowing.com Phone: (813) 251-5100

To place a port of call ad! wjalbert@divcom.com

ENGINEERS DECKHANDS

NOW HIRING!!!

COMPETITIVE PAY GREAT BENEFITS SUPPORTIVE CREW DAILY COMMUTE REQ.

Need To Fill All positions aboard DP2�Construction Support Vessel

SUBMIT APPLICAT APPLICATIONS A IONS TODAY! AT TODAY A ! AY

https:labmarferry.com/careers/

• MASTER—STCW II/2 Master 3000 Tons and Unlimited DP Certificate • CHIEF MATE—STCW II/2 Chief Mate 3000 Tons and Unlimited DP Certificate • MATE—STCW/OICNW II/1 and Unlimited DP Certificate • CHIEF ENGINEER—STCW IIl/2 CE 3000KW/ 4000HP • ASSISTANT ENGINEER—STCW lll / 1 OlCEW • DECK FOREMAN —3+ Yrs experience in deck supervisory role • BOSUN—STCW II/4, II/5, VI/2, VI/6 AB Unlimited • ABLE SEAFARER DECK—STCW II/5, STCW II/4 AB Unlimited • ABLE SEAFARER ENGINE—STCW ll/5 , STCW II/4 Oiler/Motorman • CRANE OPERATOR—API Operator License � Knuckle Boom • Wiper � OS License • OS/RIGGER—Qualified Rigger API RP2D or Equivalent • COOK—Food Safety Certificate • GALLEY HAND —Food Safety Certificate • ELECTRICIAN—Minimum 5 Yrs Mechanical/ Electrical Experience on all Vessel Types (DP2 & Conventional) • CONSTRUCTION SUPERINTENDENT– 5 + Yrs Industry Experience– Current Offshore Certifications • ROV SUPERVISOR—5+Yrs Industry Experience with 360+ Days In Senior Pilot Tech Role and Current Certifications • ROV PILOT TECH—150�hours Piloting Experience/180+ Days Offshore as Pilot with Current Certifications

Must have DP�2 DSV experience, current mariners’ credentials, certifications & physical. Send resumes & copies of credentials to:

ssr2�jobs@hydrasubsea.com 100

www.workboat.com • DECEMBER 2026 • WorkBoat


PORT OF CALL Offshore Positions Wanted Experienced Utilities, Preps, Bakers, Cooks, Painters & Riggers for Offshore. Must have T.W.I.C. Miniumum 2 years offshore experience. Must pass drug test.

JPADD RESOURCES STAFFING Email Resumes to:

j.padd@yahoo.com

Join the Mission.

Become a Certified and Accredited Marine Surveyor

Build the future of ocean technology.

Fishing Vessel Qualified. Complete course and examination for all vessel types and uses. 1-800-245-4425 or navsurvey.com

View V iieew oo ppe Vi V ew w openings peenniinnggss View openings aa and n d apply a p p and nd a apply pplly lyy

terradepth.com/company/#careers

Over 50 Years of Experience SERVICES:

BOOTH #3263 RESEARCH VESSEL OPERATIONS MANAGER This position oversees and manages all activities related to the new 78-foot research vessel at the University of Texas at Austin, the R/V Katy, and the small boat fleet that supports education and research at UTMSI.

JOB DESCRIPTION AND TO O APPLY: APPLY: APPL https://www.workboat.com/resources/j https://www.workboat.com/resources/jobs/j/obsmarketplace/univ-of-tx-operations-manager marketplace/univ-off tx-operations-manager f-

Steelwork PainƟŶŐ Interiors WŝƉŝŶŐ AutomaƟŽŶ

sales@mdmarineservices.com

OFFSHORE WORKERS NEEDED!

WWW.MDMARINESERVICES.COM

Cooks, Utility Hands, Galleyhands, Riggers, Tank Cleaners, Firewatch & Pump Operator All applicants must have: TWIC card Water Survival T Huet & Safe Guard certification. Positions require travel and set schedules. Send resume to

tandnb16@gmail.com

www.workboat.com • DECEMBER 2026 • WorkBoat

101


PORT OF CALL Employment, Equipment & Services

MARINE MACHINING & MANUFACTURING

Your One-Stop Shop or Your Marine rive Needs

A17, A19, A22 and A22HS Propeller Shafting Bar Stock lengths up to 36’ C.N.C. Machined Propeller Shafting Precision Propeller Shaft straightening & repair

Custom Machined Shaft Couplings up to 30” diameter Michigan Wheel Propellers Propeller Repair

WORLD LEADER IN BOAT SHAFTING World's Largest Stocking Distributor of AQUAMET

33475 Giftos Dr., Clinton Township, MI 48035 n PH. 586-791-8800

Homer is the #1 Alaskan Port

www.marinemachining.com - www.aquamet.com Choose Homer for Your Boat Work

www.homermarinetrades.com

102

www.workboat.com • DECEMBER 2026 • WorkBoat


PORT OF CALL

HOSS WINCH CO.

NEW & REFURBISHED WINCHES FOR SALE

HOSS WINCH CO.

LET US KNOW YOUR CUSTOM WINCH REQUIREMENTS

MARKEY

HOSS

TDSD-32

AMCON

HD-60

PROMOTOR

385

SKAGIT

WITH POWER PACKS

HPW-600

AND MUCH MORE AT www.hosswinch.com! CHRIS GONSOULIN cgonsoul@gmail.com

SKAGIT

DMW-150s

850-255-5266

TOGGLE RELEASE Standard design for shackle release. Models from .65 to 600 ton SWL.

Standard Series

LM Series

Keel Coolers

LM Series for release of line or cable.

sales@seacatch.com

www.workboat.com • DECEMBER 2026 • WorkBoat

Trouble free marine engine cooling since 1927!

THE WALTER MACHINE CO, INC Tel: 201-656-5654 - Fax: 201-656-0318

www.waltergear.com

103


PORT OF CALL Employment, Equipment & Services 36-inch Diameter Modular Plastic Pontoons The Best Idea Since the Indian Canoe

Uses: Pontoon boats, house boats,

workboats—replace old steel or aluminum pontoons Heavy Duty: Molded from sturdy, medium density polyethylene (MDPF) and filled with polyurethane foam for increased stability Modular: Each bow, middle and stern modules are 10 ft. in length

Displacement at full submersion:

Bow module supports gross weight of 3,100 lbs. and middle/stern each supports 4,200 lbs.

1674 W. Spring Meadow Loop Lecanto, FL 34461 Phone: 419-675-0002 info@wilsonpontoons.com

www.plasticpontoon.com

SERVING THE MARINE INDUSTRY SINCE 1959 SERVICES: Naval Architecture Marine Engineering Design Outfitting Regulatory

904-221-7447

ADVERTISERS INDEX Airmar Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 74 All American Marine . . . . . . . . . . . . . . . . . . . . . . . . . 14 Aurora. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Beier Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Blount Boats Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Breaux's Bay Craft. . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Bristol Harbor Group Inc . . . . . . . . . . . . . . . . . . . . . 86 BRIX Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Burger Boat Company . . . . . . . . . . . . . . . . . . . . . . . 38 Castrol Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Chance Maritime Technologies . . . . . . . . . . . . . . . 43 Colonna's Shipyard Inc. . . . . . . . . . . . . . . . . . . . . . . 37 Conrad Shipyard, LLC. . . . . . . . . . . . . . . . . . . . . . . . 13 Cummins Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 David Clark Company Inc. . . . . . . . . . . . . . . . . . . . . 17 Detyens Shipyards Inc . . . . . . . . . . . . . . . . . . . . . . . 69 Driveline Service of Portland Inc. . . . . . . . . . . . . . 15 Duramax Marine LLC . . . . . . . . . . . . . . . . . . . . . . . . 77 Eminox Limited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Enerpac Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 engines, inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CV3 Fischer Crane & Machine International . . . . . . . . 42 Gilbert Associates Inc. . . . . . . . . . . . . . . . . . . . . . . . 75 Gulf Coast Air & Hydraulics Inc.. . . . . . . COVER TIP Gunderson Marine, LLC . . . . . . . . . . . . . . . . . . . . . . 51 Havis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 HDKits - IESC Diesel Corp. . . . . . . . . . . . . . . . . . . . 36 Honda Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Howmet Fastening Systems . . . . . . . . . . . . . . . . . . . 9 Imtra Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22+23 Incat Crowther . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 JT Marine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Karl Senner, LLC . . . . . . . . . . . . . . . . . . . . . . . . . . .CV4 KEMEL USA Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Oceantech . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Laborde Products Inc . . . . . . . . . . . . . . . . . . . . . . . . . 3 Louisiana Cat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 MAN Engines & Components Inc. . . . . . . . . . . . . . 31 Marcom Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Marine Money. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Marine Travelift Inc . . . . . . . . . . . . . . . . . . . . . . . . . . 63 McDermott Light & Signal. . . . . . . . . . . . . . . . . . . . 67 Moose Boats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 North River Boats . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Outland Technology Inc . . . . . . . . . . . . . . . . . . . . . . 86 Palfinger Marine GmbH . . . . . . . . . . . . . . . . . . . . . . 79 Path Robotics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Pennel USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Platypus Marine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Prime Mover Controls Inc . . . . . . . . . . . . . . . . . . . . 18 Pye-Barker Fire & Safety . . . . . . . . . . . . . . . . . . . . 53 Remitite America, Inc. . . . . . . . . . . . . . . . . . . . . . . . 19 Ring Power Corp . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Robert Allan Ltd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 R W Fernstrum & Company. . . . . . . . . . . . . . . . . . . . 5 SAFE Boats International. . . . . . . . . . . . . . . . . . . . . 29 Savox Communications . . . . . . . . . . . . . . . . . . . . . . 21 Schoellhorn-Albrecht Machine Company . . . . . . 28 Schwarze-Robitec America Inc. . . . . . . . . . . . . . . 37 Scienco/Fast Systems . . . . . . . . . . . . . . . . . . . . . . . 14 Seasats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Seatrax, Inc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Shockwave Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Snow & Company Inc. . . . . . . . . . . . . . . . . . . . . . . . 26 Southern Thrusters. . . . . . . . . . . . . . . . . . . . . . . . . . 28 Springfield Marine Co. . . . . . . . . . . . . . . . . . . . . . . . 18 Steiner Shipyard Inc . . . . . . . . . . . . . . . . . . . . . . . . . 54 Subsalve USA Corp . . . . . . . . . . . . . . . . . . . . . . . . . . 30 FLIR Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 The Whiskey Project Group USA, LLC . . . . . . . . . 44 Thompson Marine-CAT . . . . . . . . . . . . . . . . . . . . . . 87 Transport Products & Service Enterprises, Inc. .16 Twin Disc Incorporated . . . . . . . . . . . . . . . . . . . . .CV2 Vancouver Drydock Company Ltd . . . . . . . . . . . . . 64 Volvo Penta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 W & O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Walther Electric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Weldsale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Yank Marine Inc.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Yanmar Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Coast Guard & State Pilotage License Insurance License Defense & Wage Loss Group Coverage Available

Agent - MOPS Merchant Officers Protective Syndicate

R.J. Mellusi & Co.

(212) 962-1590 - FAX (212) 385-0920

29 Broadway, Suite 2400, New York, NY 10006

INFO@LAYPITMAN.COM

WWW.LAYPITMAN.COM

SMITH BROTHERS, Inc.

TUGS/BARGES FOR RENT

Barges sized from 8’ x 18’ to 45’ to 120’. Also “Shugart sectional barges. “Truckable Tugs” here.

www.smithbarge.com Galesville, MD 20765 - (410) 867-1818 Keith Aschenbach keitha@mcleancontracting.com

104

www.workboat.com • DECEMBER 2026 • WorkBoat


JOHN DEERE POWER SYSTEMS DISTRIBUTOR FOR THE MID-SOUTH REGION OF THE UNITED STATES AND LATIN AMERICAN REGION. From tugs and towboats to ferries, fishing vessels and workboats, engines, inc. provides dependable power backed by the expertise and support your operation demands. We’re here to help you choose the right power, keep it performing and keep your business moving—on the water and beyond.

ALSO VISIT OUR JDPS & DISTRIBUTORS COLLABORATIVE BOOTH

VISIT US AT OUR BOOTH

Dec. 2-4, 2026 New Orleans, LA

#743 #3501 ENGINES, INC.

GENUINE PARTS

ENGINESPOWER.COM

EXPERT SERVICE

870-268-3700

JOHN DEERE POWER SYSTEMS

INDUSTRY EXPERIENCE

LONG-TERM PARTNERSHIPS

FOLLOW US ON SOCIAL


BOOTH 2915 Co-Located with:

Karl Senner, LLC is proud to equip American Marine Corp. with REINTJES Gearboxes onboard its two new tugboats being built at New Pacific Industrial LLC.

Onboard each vessel Karl Senner, LLC is supplying two REINTJES WAF 3455 Reverse Reduction Gearboxes with integrated multi-disc shaft brakes,, and a three station Main Propulsion Control System.

VESSEL OWNER:

AMERICAN MARINE CORP.

NAVAL ARCHITECT:

GLO STEN

SHIP YARD:

NEW PACIFIC INDUSTRIAL LLC

+1 (504) 469-4000

KARLSENNER.COM

Rendering by Glosten


Turn static files into dynamic content formats.

Create a flipbook
WorkBoat December 2026 by WorkBoat - Issuu