SHORT COURSE GUIDE
2017
SHORT COURSE GUIDE
Contents
2017
AGRICULTURE, ENVIRONMENT AND HORTICULTURE
2
ENGINEERING AND WELDING
9
AgVet Chemical Licensing
2
Engineering
9
Farming and Farm Vehicle Skills
2
Fabrication and Welding
9
Gardening
3
GENERAL PREPARATION
11
ARCHITECTURE, TIMBER AND CABLING
3
Transition and Work Education
11
Building Design
3
HAIR AND FASHION
11
Hair Design
11
Computer-Aided Drawing
3
HEALTH AND COMMUNITY SERVICES
12
Cabinet and Furniture Making
4
First Aid
12
Carpentry and DIY
4
Telecommunications and Cabling
5
Health Care
12
Testing and Tagging
5
HOSPITALITY, TOURISM AND EVENTS
13
BUSINESS, RETAIL & TECHNOLOGY
6
Baking and Patisserie
13
Hospitality
13
Computer Software Skills
6
TRANSPORT, WAREHOUSING AND LOGISTICS
14
CIVIL CONSTRUCTION AND TRAFFIC CONTROL
7
Forklift Licensing
14
Civil Construction and Earthmoving
7
Heavy Vehicle Licensing
14
Crane Licensing
8
Transport
16
Traffic Management
9
Warehousing and Logistics
16
Work Health and Safety
16
1 Wodonga TAFE Short Course Guide 2017
AGRICULTURE, ENVIRONMENT AND HORTICULTURE AGVET CHEMICAL LICENSING AgVet Chemical Users Course (Level III) ASAGVETL301 | Units from AHC30110 Certificate III in Agriculture Learn the industry standards for chemical use, storage and handling. This course provides the required training for many quality assurance programs and is necessary to apply for the Victorian agricultural chemical users permit. Learn to use and apply chemicals in an industry environment. Dates: 14 & 21 Mar or 2 & 9 May Duration/Time: 2 sessions, 8.30am-5pm Cost: $360 AgVet Chemical User’s Course (Level III) Reaccreditation ASAGVETL3R01 | Units from AHC30110 Certificate III in Agriculture Re-accredit your current (within 5 year validity) AgVet Chemical Licence. Learn current legislative requirements and safe working practices needed to use pesticides and herbicides. There’s hands-on training in the preparation, application, transportation and storing of chemicals. Dates: 28 Mar Duration/Time: 1 session, 8.30am-5pm Cost: $240 FARMING AND FARM VEHICLE SKILLS Basic Bush GPS Skills ASBUSHGPS01 | Units from AHC31410 Certificate III in Conservation and Land Management Learn how to use a hand-held GPS unit fitted with topographical mapping and relevant computer software to download applications and further mapping packages. With this course, you’ll learn how to mark and locate features, and to navigate terrain. This knowledge is useful for land-care projects like planting, fencing, and habitat monitoring, or when you are bushwalking. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-5pm Operate and Maintain Chainsaws ASOPCHAIN01 | Units from AHC30710 Certificate III in Horticulture Gain the skills to operate and maintain a chainsaw safely. This training is useful if you work in the horticulture and agriculture industries or even if you’ve just bought your first chainsaw and are looking to alter your yard and trees at home. Further advanced courses are available. Dates: 1 & 2 May or 26 & 27 Jun Duration/Time: 2 sessions, 8.30am-4.30pm Cost: $320 Operate Side by Side Utility Vehicles A2SBSUV1 | Units from AHC20416 Certificate II in Horticulture A training requirement for all industries using side by side utility vehicles, you’ll be introduced to the legislative requirements and safe working practices. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-4.30pm Cost: $240 Operate Tractors ASOPTRACT01 | Units from AHC20110 Certificate II in Agriculture Prepare yourself to operate a tractor safely in the farming environment, adhering to legislation. This is a useful, practical and theoretical course for people new to the industry, as well as those who would like to stay informed about current standards and practices. Dates: Please enquire for dates Duration/Time: 2 sessions, 8.30am-4.30pm Cost: $320 Quad Bike Training ASQUADBIKE01 | Units from AHC20110 Certificate II in Agriculture Whether for work or play, it is important that you understand the best and safest way to ride and use quad bikes. In a working environment, it is very important you understand the legislative requirements surrounding quad bike usage. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-4.30pm Cost: $300
2 Wodonga TAFE Short Course Guide 2017
GARDENING Basic Propagation NA14GWBPT* Try your hand at growing a wide range of plants from techniques such as cuttings, layering, division, seed raising, and grafting. This is a fun and informative hands-on workshop ideal for the keen gardener, natural green-thumb or not! Available at two different dates so you can get a hand with either autumn or winter cuttings. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-4.30pm Collect Seeds ASCOLLSEED01 | Units from AHC31410 Certificate III in Conservation and Land Management Discover different methods of collecting seed, mapping locations, equipment use, seed extraction methods, seed storage, and plant identification. This short course is ideal if you are interested in the environment, sustainability, or conservation and land management. It will also be useful if you are aiming to work with local seed banks. You’ll gather seeds from the local surrounding Wodonga region for examination back on-campus. Dates: Please enquire for dates Kitchen Gardening NA10W2SKG* This course is open to all those wanting to develop the skills needed to develop a sustainable vegie patch. Learn about growing fruit, vegetables, and other useful plants to have in your garden. You gain an understanding of companion planting, composting, recycling, and pest management. Reap the benefits of your own fresh, home-grown produce. Dates: Please enquire for dates Duration/Time: 4 sessions, 9.30am-12.30pm Pruning Workshop NA14GWPW* Learn the principles of pruning demonstrated on a wide range of plants such as roses, fruit trees, and hedges. You will develop skills to use a wide range of pruning tools and equipment to gain confidence and skills. Dates: Please enquire for dates Duration/Time: 1 session, 9am-12pm ARCHITECTURE, TIMBER AND CABLING BUILDING DESIGN Conduct a Bushfire Attack Level (BAL) Assessment A6CBAL1 | Units from 22268VIC Advanced Diploma of Building Design (Architectural) Discover the skills to assess the Bushfire Attack Level (BAL) of a site by following steps to assess the bushfire risk in accordance with Method 1 and AS3959-2009. This course will complement a building design, home assessment or safety inspection role. Dates: Enrol any time – 100% online Duration/Time: 6 months Cost: $900 Apply Bushfire Attack Level (BAL) assessment to design and construction process A6ABAL1 | Units from 22268VIC Advanced Diploma of Building Design (Architectural) Learn how to apply the outcome of a BAL assessment to building design, material selection and construction methods so that buildings better withstand the effects of bushfire. Completion of ‘Conduct a bushfire attack level (BAL) assessment’ is a requirement for this course. Dates: Enrol any time – 100% online Duration/Time: 6 months Cost: $450 COMPUTER-AIDED DRAWING Essential 2D CAD® IA06E2D* Build your knowledge of computer-aided design (CAD) using Autodesk® AutoCAD® software. For those in the industry or hobbyists, you’ll engage in a mix of theoretical and practical classroom sessions. You will work towards producing twodimensional sketch plans and working drawings. Dates: 24 Apr-29 May or 19 Jun-7 Aug Duration/Time: 6 sessions, 5.30-8.30pm Cost: $365
3 Wodonga TAFE Short Course Guide 2017
Intermediate Auto CAD® IA06IAC* Following on from Essentials AutoCAD®, or if you’ve had some experience in using AutoCAD® before, you’ll learn further productivity tools and procedures of CAD using Autodesk® AutoCAD® software, including layout space, dynamic blocks, external references, attribute extraction design centre, and more. Dates: 14 Aug-18 Sep Duration/Time: 6 sessions, 5.30-8.30pm Cost: $365 REVIT Electronic Drawing A6REVIT1 | Units from 22268VIC Advanced Diploma of Building Design (Architectural) Learn to use the Autodesk’s® REVIT® program to create virtual three-dimensional models which can be used for visualisation, presentation, data extraction, and the creation of construction drawings. This course is ideal if you’re working in the industry of design, manufacturing, drafting, or engineering. Dates: 20 Apr-16 Nov Duration/Time: 7 months, 5.30-8.30pm Cost: $1500 CABINET AND FURNITURE MAKING Introduction to Cabinet Making NA14INTROC* This course will help you to develop basic cabinet making skills, by constructing set pieces chosen from a selection, or subject to the teachers assessment design and construct your own project. This course is ideal for people with little to no cabinet making experience. Dates: 14 Mar-27 Jun Duration/Time: 13 weeks, 6-9pm Cost: $510 Intermediate Cabinet Making NA14INTERC* Following on from the Introduction to Cabinet Making, further develop your skills by using more advanced methods for construction of pieces. You can either construct set pieces that you choose from a selection, bring in plans, or design and construct your own. It is recommended you have some experience in cabinet making or wood work beforehand. Dates: 16 Mar-29 Jun Duration/Time: 13 weeks, 6-9pm Cost: $510 Furniture Restoration NA14FURNR* Have a piece of furniture that you know would just look amazing if restored right? Learn to restore a piece of furniture. The piece needs to be reasonably simple for you to restore and needs to meet your level of restoration ability. An extra cost may be added for repairs to larger pieces or for replacement parts. Dates: 16 Mar-29 Jun Duration/Time: 13 weeks, 6-9pm Cost: $510 CARPENTRY AND DIY DIY Carpentry NA14DIYC* Discover the craft of carpentry and develop the skills, techniques and technical know-how to complete tasks and projects around the home. You’ll find this course ideal if you want to delve into carpentry but aren’t sure where to start. Dates: 14 Mar-27 Jun Duration/Time: 13 weeks, 6-9pm Cost: $510 Basic Static Machines A3BSMAC1 | Units from MSF31113 Certificate III in Cabinet Making Undertaken as full-day or shorter night classes, you can gain the basic understanding of operating, maintaining and problem solving involved with static woodworking machines. Dates: Please enquire for dates Duration/Time: 1 month (6 sessions) or 3 months (12 sessions) Cost: Funded $398 Full Fee $1382
4 Wodonga TAFE Short Course Guide 2017
TELECOMMUNICATIONS AND CABLING ACMA Restricted/Open Cabling Registration A3ACMA1 | Units from ICT30213 Certificate III in Telecommunications Data and telecommunications infrastructure is more in-demand than ever! Any cabling that connects or is intended to connect to the telecommunications network must be carried out by a registered cabler. This course is suitable for electricians, data cablers, or TV and communications personnel who want to enter into the business of telecommunications cabling. Dates: Please enquire for dates Duration/Time: 5 sessions, Thurs: 1-9pm, Fri: 8.30am-5pm, Sat 8.30am-3pm Cost: Funded $482 Full Fee $722 Optic Fibre Cabling Endorsement A3OPTIC1 | Units from ICT30213 Certificate III in Telecommunications Expand your current capabilities and areas of responsibility! This course is suitable for relevantly employed people who wish to enter into the business of optical fibre cabling. Successfully completing this course enables you, as a licensed cabler, to add optical fibre cabling endorsements to your Australian Communications and Media Authority (ACMA) Austel open registration. Dates: Please enquire for dates Duration/Time: 2 sessions, Fri: 8.30am-5pm, Sat 8.30am-3pm Cost: Funded $351 Full Fee $651 Structured Cabling (Categories 5E, 6 & 7) Endorsement A3SCABL1 | Units from ICT30213 Certificate III in Telecommunications You learn to install an integrated voice and data cabling system, conduct testing on the cabling system, and provide certification documentation for the cabling system. The content of the Category 5E component is based on the current standards in commercial premises including AS3080, AS3084 and AS3086. Equipment and terminators for Categories 6 & 7 are included. Dates: Please enquire for dates Duration/Time: 2 sessions, Fri: 8.30am-5pm, Sat 8.30am-3pm Cost: Funded $301 Full Fee $551 Coaxial Cabling Endorsement A3COAXC1 | Units from ICT30213 Certificate III in Telecommunications Successfully completing this course enables you, as a licensed cabler, to add the Coaxial Cable endorsement to your Australian Communications and Media Authority (ACMA) Open Registration. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-5pm Cost: $350 TESTING AND TAGGING Testing and Tagging of Electrical Appliances and Leads IA05TT* Gain training in the use of portable equipment for the testing and tagging of electrical appliances and leads. Designed for people who want to inspect, and test and tag appliances and leads up to 240 volts, it is an ideal skill and certification to have for small businesses and operators. Dates: 13 & 14 Feb, 8 & 9 Mar or 26 & 27 Jun Duration/Time: 2 sessions, 4-10pm Cost: $220
5 Wodonga TAFE Short Course Guide 2017
BUSINESS, RETAIL & TECHNOLOGY COMPUTER SOFTWARE SKILLS Intermediate Word 2013 NA08WORD* This course extends on the basics of Microsoft® Word® 2013 and helps students create more complex and varied documents. Existing skills and knowledge are enhanced by covering more complex aspects of Word®. This course is primarily designed for people with some experience who wish to improve their skills and productivity. Dates: 16 May, 18 Jul, 29 Aug or 14 Nov Duration/Time: 1 session, 1.30-4.30pm Cost: $99 Advanced Word 2013 NA14WORD* For more savvy Word® users, you’ll gain the skills to create complex documents by adding components such as customised lists, advanced tables, complex headers and footers, charts, and graphics. Discover features such as advanced mail merge, styles, table of contents, indexing, templates and form design. These features are great for home or business use. Dates: 7 Mar, 20 Jun, 5 Sep or 28 Nov Duration/Time: 1 session, 1.30-4.30pm Cost: $99 Intermediate Excel 2013 NA08EXCEL* Learn how to work more effectively with Excel® 2013 workbooks and worksheets. Students will undertake hands-on exercises in advanced formatting, absolute referencing, conditional formatting, charting, and filtering features to manage and analyse data. Dates: 4 Apr, 6 Jun, 22 Aug or 24 Oct Duration/Time: 1 session, 1.30-4.30pm Cost: $99 Advanced Excel 2013 NA14EXCEL* Use advanced functions and formulas to plan, design and create spreadsheets. Learn to use advanced spreadsheet features such as flash fill, advanced filtering, sub-totalling, advanced formulas, lookup and reference functions, data validation, templates, linking worksheets and workbooks, pivot tables, slicers and macros. If you are using Excel® but would like to learn more about what it can really do, then this course is for you. Dates: 14 Mar, 2 May, 25 Jul or 31 Oct Duration/Time: 1 session, 1.30-4.30pm Cost: $99 Advanced Publisher 2013 NA12PUBLISH* For relatively experienced Publisher® users, learn to use advanced features of Microsoft® Publisher® to enhance your professional documents. You’ll learn how to work with advanced content options like imported text and embedded objects. You’ll gain knowledge in the use of advanced text options, typography, advanced picture tasks, layering, grouping and other graphics tools. Dates: 11 Apr, 30 May or 15 Aug Duration/Time: 1 session, 1.30-4.30pm Cost: $99 Advanced Outlook 2013 NA08OUTLOOK* This course aims to increase your productivity by providing the skills and knowledge to use Microsoft® Outlook® 2013 more effectively. Enhance your communication skills and increase productivity at your home or the workplace. This short course covers all aspects of Outlook® 2013 and then looks at more advanced topics such as mail rules, collaborating with other users, quick steps, conversation mode and sharing calendars. It also delves into organising email messages, scheduling meetings, and creating and managing task requests. Dates: 9 May or 21 Nov Duration/Time: 1 session, 1.30-4.30pm Cost: $99
6 Wodonga TAFE Short Course Guide 2017
Advanced PowerPoint 2013 NA08POWERPT* Create modern, dynamic slideshows and presentations with Microsoft ® PowerPoint® 2013. Building on your basic knowledge of PowerPoint® or the Office® suite, you’ll gain valuable skills in how to print audience handouts, use SmartArt graphics, design themes, shape effects, improved WordArt, custom slide layouts, presenter view, shape merging, importing, and exporting. This course also covers incorporating and trimming videos and sound clips. Dates: 23 May, 1 August or 3 October Duration/Time: 1 session, 1.30-4.30pm Cost: $99 CIVIL CONSTRUCTION AND TRAFFIC CONTROL CIVIL CONSTRUCTION AND EARTHMOVING Enhance your knowledge and experience as an operator of earthmoving machinery in line with relevant state and national certificate requirements. The courses offered can involve full training programs in a theoretical and practical environment, or alternatively many are offered to experienced operators as ‘1on1 Assessment’. These skills and tickets are valuable if you are looking to enter the civil construction industry or expand your capabilities and responsibilities. Earthmoving (Front End Loader, Backhoe, Dozer, Excavator) A3EMOV1 | Units from FPI30211 Certificate III in Harvesting and Haulage Dates: 13-24 Feb or 27 Mar-7 Apr Duration/Time: 10 sessions, 8am-4.30pm Cost: Funded $836 Full Fee $1836 Backhoe - 1on1 Assessment A3LBX1 | Units from FPI30211 Certificate III in Harvesting and Haulage Dates: Please enquire for dates Duration: 4 hours Cost: $570 Dozer - 1on1 Assessment A3LZX1 | Units from FPI30211 Certificate III in Harvesting and Haulage Enhance your knowledge and experience as an operator of earthmoving machinery in line with relevant state and national certificate requirements. This course is ideal if you are looking to gain competence with earthmoving machinery and enter the civil construction industry. This is designed for people who already have prior training and experience operating the machinery. It is assessment-only, with no training or tuition provided. Dates: Please enquire for dates Duration: 3 hours Cost: $570 Excavator - 1on1 Assessment A3LEX1 | Units from FPI30211 Certificate III in Harvesting and Haulage Enhance your knowledge and experience as an operator of earthmoving machinery in line with relevant state and national certificate requirements. This course is ideal if you are looking to gain competence with earthmoving machinery and enter the civil construction industry. This is designed for people who already have prior training and experience operating the machinery. It is assessment-only, with no training or tuition provided. Dates: Please enquire for dates Duration: 3 hours Cost: $570 Front End Loader - 1on1 Assessment A3LLX1 | Units from FPI30211 Certificate III in Harvesting and Haulage Dates: Please enquire for dates Duration: 3 hours Cost: $570 Skid Steer - 1on1 Assessment A3LSX1 | Units from FPI30211 Certificate III in Harvesting and Haulage Dates: Please enquire for dates Duration: 3 hours Cost: $570
7 Wodonga TAFE Short Course Guide 2017
Elevating Work Platform A4WP2 | Units from TLI41910 Certificate IV in Mobile Crane Operations Dates: 13-15 Feb, 20-22 Mar, 18-20 April or 29-31 May Duration/Time: 3 sessions, 8am-4.30pm Cost: Funded $405 Full Fee $697 OHS Construction Induction Card (White Card) A3WHITE1 | Units from RII30913 Certificate III in Civil Construction Wanting to start work in the construction industry? This course is aimed at all prospective and new workers who are or will be required to carry out construction work. It is required that everyone on any construction site has this ticket. Dates: 23 Jan, 23 Feb, 23 Mar, 27 Apr or 22 May Duration/Time: 1 session, 8am-3.30pm Cost: $168 CRANE LICENSING Crane (C2) up to 20 tonnes A4C21 | Units from TLI41910 Certificate IV in Mobile Crane Operations Learn about the standards and regulations surrounding crane operations, along with skills in site and job planning, preoperational check, crane set-up, signalling, operation of the crane, and shut-down of the crane. Dates: Please enquire for dates Duration/Time: 5 sessions, 8am-4.30pm Crane (CN) non-slewing A4CN1 | Units from TLI41910 Certificate IV in Mobile Crane Operations Gain skills in site and job planning, pre-operational check, set-up, operation of the crane, signalling, and shut-down of the crane. Dates: Please enquire for dates Duration/Time: 5 sessions, 8am-4.30pm Dogging A4DG2 | Units from TLI41910 Certificate IV in Mobile Crane Operations Trained and assessed by qualified trainers from industry backgrounds, you will learn how to sling and secure loads ready for lifting. This course will also enable you to safely direct, land, and position loads using various communication systems. This course also covers regulations, safety requirements, and different crane requirements. Dates: 1-8 Feb, 29 Mar-5 Apr or 17-24 May Duration/Time: 6 sessions, 8am-4.30pm Cost: Funded $592 Full Fee $1372 Working at Heights A4WAH2 | Units from TLI41910 Certificate IV in Mobile Crane Operations Working at heights training is focused on fall prevention rather than fall arrest. It is designed to equip workers with the knowledge and skills to safely work in any height situation and comply with current legislation. All workers who conduct or supervise tasks whilst at height will find this course beneficial. Dates: 9 Feb, 10 Apr or 6 Jun Duration/Time: 1 session, 8am-4.30pm Cost: $326 Order Picker A4LO1 | Units from TLI41910 Certificate IV in Mobile Crane Operations If you know how to operate an order picker but want to gain your national High Risk Work order picker licence, this course is ideal for you. On successful completion, not only will you get your licence, but you will also learn new skills from our industryleading trainers. You must be 18 years of age to gain a HRW Licence. This course is only open to employers and corporate training. It can be conducted in your workplace, in the Albury-Wodonga region. Dates: Please enquire for dates
8 Wodonga TAFE Short Course Guide 2017
TRAFFIC MANAGEMENT Traffic Control A3TRAF1 | Units from RII30913 Certificate III in Civil Construction This course is mandatory for everyone wishing to undertake the tasks of a traffic controller on a public road and anyone required to read or interpret traffic management plans. You’ll discover how to control traffic safely through and around worksites and set up road signage at a road construction site. This course is available as a NSW-only, Victoria-only, or a combined Victoria and NSW course. Dates: 18-19 Jan, 7-8 Feb, 1-2 Mar, 28-29 Mar, 26-27 Apr or 16-17 May Duration/Time: 1-2 sessions, 8am-4.30pm Cost: $515 Vic & NSW, $495 NSW only, $446 Vic only Work Zone Traffic Control Guidance Plan - Developer Skill Set RIISS00045 | Units from RII30915 Certificate III in Civil Construction This course is designed to enhance your knowledge of designing and inspecting traffic control plans (TCPs). This course will be suited to you if you are a works supervisor, surveillance officer, road safety auditor, or a project manager. Dates: 1-2 Feb, 15-16 Mar, 3-4 May or 7-8 Jun Duration/Time: 2 sessions, 8am-4pm Cost: $640 Vic & NSW, $625 NSW only, $598 Vic only ENGINEERING AND WELDING ENGINEERING Perform Basic Machining NA14PBMAC* Get the training to be able to undertake basic machining under supervision. Skills development involves setting up and machining components in lathes, milling machines, cut off saws, pedestal grinders and drilling machines. A focus skill in the course is the marking out of projects - effectively the preparation prior to machining - as this is an absolute necessity to get right in the process. Dates: 26 Apr-28 Jun Duration/Time: 2 months, 6-10pm Cost: $560 FABRICATION AND WELDING Creative Blacksmith and Wrought Iron NA08CBWI* Find out and acquire the skills involved in including hand forging, metal forming, and metal cutting. Enjoy the satisfaction of designing and fabricating a project for inside or outside your home and be able to apply it to all future metal projects. It’s a very handy skill to have that could save you some serious dollars in the long run. Dates: Please enquire for dates Duration/Time: 6 weeks, 8.30am-1.30pm Cost: $727 Welding Practical Skills NA15WELDPS* Our Welding Practical Skills course provides the opportunity to learn welding, without the rigours of going through a welding certification or qualification. You’ll get significant hands-on opportunity to practice and develop your welding skills. Specifically, you’ll learn the three processes of; manual metal arc welding, gas metal arc welding, and gas tungsten arc welding. Dates: 20 Mar-5 Jun Duration/Time: 9 sessions, 6-10pm Cost: $430 Introduction to Welding NA08IW* Designed to give you basic welding skills, this course will introduce you to manual metal arc welding and gas metal arc (MIG) welding, enabling you to complete simple welding tasks and small projects. Dates: 6 & 13 May Duration/Time: 2 sessions, 8.30am-1.30pm Cost: $303
Welding course costs may be considerably less, depending on your current welding certifications
9 Wodonga TAFE Short Course Guide 2017
Basic Welding ASWELDBAS01 | Units from MEM40105 Certificate IV in Engineering This course is for you if you have little or no experience in welding, to gain the skills for that small job around the house or farm, or if you would like to obtain a start in the welding trade. It allows you the flexibility to gain both practical experience and theoretical knowledge in one or more of the areas of gas metal arc welding, manual metal arc welding, gas tungsten arc welding and oxyacetylene welding. If desired, intermediate and advanced courses can follow upon competent completion of this course. Dates: 21 Feb-27 Jun or 22 Feb-21 Jun Duration/Time: 4 months, 6-10pm Cost: Funded $680 Full Fee $1320 Intermediate Welding ASIWELDFCA01, ASIWELDGMA01, ASIWELDGTA01, ASMANMAWEL01 | Units from MEM40105 Certificate IV in Engineering Take your welding skills further! This course follows on from ‘Basic welding’, giving you the choice of welding disciplines in manual metal arc welding, gas metal arc welding, gas tungsten arc welding, or flux core arc welding. The units in this course are requirements for entry into the advanced welding short course. Dates: 20 Mar-30 Oct Duration/Time: 7 months, 6-10pm Cost: Funded $1200 Full Fee $1880 Advanced Specialised Welding A4SWELD1 | Units from MEM40105 Certificate IV in Engineering Looking to gain or enhance your welding skills quickly? We offer thorough training on a fast-track basis that allows you to reach certification level within 6 months. You’ll start on the basics, and work your way through foundation skills and techniques, moving onto intermediate, and eventually learning advanced methods. Successful applicants can then apply for our highest-level of welding course, Certified Welding (AS1796). Dates: 22 Mar-25 Oct Duration/Time: 6 months, 6-10pm Cost: Funded $1215 Full Fee $1740 Advanced Welding ASADWELFLU01, ASADWELGMA01, ASADWELGTA01, ASADWELMMA01 | Units from MEM40105 Certificate IV in Engineering Having completed the welding streams of basic and intermediate welding, this course will provide you with the opportunity to further hone your welding skills and become an advanced welder. It acts as great preparation to go for your certification from the Welding Technology Institute of Australia (WTIA) later on. Dates: 16 Mar-27 Jul Duration/Time: 4 months, 6-10pm Cost: Funded $675 Full Fee $875 Certified Welding ASCERTAR8F01, ASCERTAR8G01, ASCERTARC701, ASCERTPIP601, ASCERTPIPE01, ASCERTPLAT01 | Units from MEM40105 Certificate IV in Engineering Delivered to suitably qualified applicants, this course provides training to sit the Welding Technology Institute of Australia’s (WTIA) welding certification AS1796 for flux core arc (8F) welding. You’ll learn the most advanced methods and skills in welding. Dates: 16 Mar-27 Jul Duration/Time: 4 months, 6-10pm Cost: Funded $675 Full Fee $875 Intensive Certified Welding ASCERTAR8F01, ASCERTAR8G01, ASCERTARC701, ASCERTPIP601, ASCERTPIPE01, ASCERTPLAT01 | Units from MEM40105 Certificate IV in Engineering This Certified Welding course is delivered at an intensive pace, over the span of five full-time days of theoretical and practical sessions. Delivered to suitably qualified applicants, this course provides training to sit the Welding Technology Institute of Australia’s (WTIA) welding certification AS1796. Dates: 6-10 Mar Duration/Time: 1 week, 8.30am-5pm Cost: $1375
10 Wodonga TAFE Short Course Guide 2017
GENERAL PREPARATION COURSES FOR PEOPLE WITH A DISABILITY OR LEARNING DIFFICULTIES TRANSITION AND WORK EDUCATION Vocational Tasters A0VOCT | Units from 22302VIC Certificate I in Work Education This short course offers people with an intellectual disability a chance to experience a variety of different vocational tasters. Students will be engaged in practical hands-on activities and will work together to achieve team projects throughout the year. Dates: 10 Feb-17 Nov Duration/Time: 9 months, 10am-2.30pm Cost: $800 Concession $160 Certificate II in Skills for Work and Vocational Pathways FSK20113 Designed for individuals who require further foundation skills development to prepare for workforce entry or vocational training pathways. Students will develop a range of skills including workplace literacy and numeracy, digital literacy, problem solving and workplace communication as well as a range of industry specific skills. Dates: 6 Feb & 17 Apr Duration/Time: 8 weeks Cost: $330 Concession $66 HAIR AND FASHION HAIR DESIGN Colour & Lighten – Foundations Skills NA16CLIGHT* As a qualified stylist or apprentice hairdresser, become further equipped to select and apply products with confidence. These fundamental principles prepare you to colour and lighten hair in a hairdressing salon. You must be employed as an apprentice or hold a Certificate III in Hairdressing. Dates: 13 Feb & 6 Mar Duration/Time: 4 sessions, 9am-5pm Cost: $360 (includes mannequin) Foiling – Design and Perform Full and Partial Highlighting Techniques NA16FOIL* Two full-day workshops prepare you to apply foiling techniques, sectioning and placement patterns. As a qualified stylist or apprentice in hairdressing, you will learn how to give your clients the results they seek. Dates: 20 & 27 Mar Duration/Time: 2 sessions, 9am-5pm Cost: $255 (includes mannequin)
11 Wodonga TAFE Short Course Guide 2017
HEALTH AND COMMUNITY SERVICES FIRST AID Provide Cardiopulmonary Resuscitation A3PCPR1 | Units from HLT33115 Certificate III in Health Services Assistance Learn how to treat someone experiencing cardiac arrest (when the heart stops pumping). This life-saving course provides the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with Australian Resuscitation Council (ARC) guidelines. It is for anyone who wants to be fully prepared to provide CPR at home, in the community or workplace if required. This course is also available as a Refresher course for those who currently hold a CPR certification but want to maintain their confidence and skills in the methodology. Please note: CPR training is included in the Provide First Aid training course and does not need to be completed separately. Dates: Day class - 3 Feb, 18 Feb, 10 Mar, 6 May or 30 Jun. Evening class - 31 May or 7 Jun Duration/Time: Day - 1 session, 9am-12pm. Evening – 1 session, 6-9pm Cost: $60 Provide First Aid and Cardiopulmonary Resuscitation A3FAID1 | Units from HLT33115 Certificate III in Health Services Assistance This equivalent Level 2 Senior First Aid course trains people who want to calmly know what to do in the event of an injury or emergency; to confidently take the proper actions and precautions to ensure a victim has the best chance of a full recovery. Learn the knowledge and skills you need to carry out first aid for life-threatening injuries and illnesses in the home and workplace, including CPR training. Students need to complete pre-course learning activities online prior to attending the training classes. This course is available as a longer day class (1 session) or shorter night classes (2 sessions). This course is also available as a refresher for existing qualification holders, where no pre-course online activity is required but you are required to present your original first aid certificate on day of training. Your first aid certificate must be current, with the expiry date within six weeks of the training date. Dates: Day class (New and Refresher) - 3 Feb, 18 Feb, 10 Mar, 6 May or 30 Jun. Evening class (New and Refresher) - 31 May & 7 Jun Duration/Time: Day - 1 session, 9am-4.30pm. Evening - 2 sessions, 6pm-9pm Cost: $180 Provide an Emergency First Aid Response in an Education and Care Setting A3AIDEC1 | Units from HLT33115 Certificate III in Health Services Assistance Gain the skills and knowledge required to provide a first aid response to infants, children and adults. The unit applies to educators and support staff working within an education and care setting who are required to respond to a first aid emergency, including asthmatic and anaphylactic emergencies. Dates: Please enquire for dates Duration/Time: 1 session, 8.30am-5pm Cost: $240 Mental Health First Aid NA05MHFA* This short course is designed for community members, teachers, health care workers, parents, allied health practitioners, and others interested in understanding and responding to people experiencing mental health issues. Dates: Day class - 6 & 7 Feb or 7 & 14 Jun. Evening class - 2, 9, 16 & 23 Mar Duration/Time: Day - 2 sessions, 9am-5pm. Evening - 4 sessions, 5.30-8.30pm Cost: $350 HEALTHCARE Medical Terminology ASMEDTERM01 | Units from HLT43015 Certificate IV in Allied Health Assistance Gain the skills and knowledge required to understand and respond to instructions containing medical terminology, to carry out routine tasks and communicate with a range of internal/external clients in a medical environment, and to use appropriate advanced medical terminology. Dates: Enrol any time – 100% online Duration/Time: 6 weeks Cost: $300
12 Wodonga TAFE Short Course Guide 2017
HOSPITALITY, TOURISM AND EVENTS BAKING AND PATISSERIE Geoffrey Michael Masterclass NA15MASTER* Come and learn how to create stunning treats and desserts! With workshops delivered by local patissier extraordinaire Geoffrey Michael, you’ll learn the art of making fantastic looking (and tasting) sweets! There are two workshops running this semester, Macarons and Crouquembouche, come along to both or pick your favourite! Dates: 23 Sep & 14 Oct Duration/Time: 1 session per workshop, 9am-4.30pm HOSPITALITY Barista Basics NA08BB* Learn how to operate and clean an espresso machine, set and adjust the grind, and texture milk. Explore the coffee menu and make a cappuccino, latte, and flat white to industry standards. All things you need to know to make great coffee at home or work in the industry. Dates: Please enquire for dates Duration/Time: 1 session, 6-10pm Barista - Big Day Out NA08CA* Barista Big Day Out! This workshop combines the barista basics & milk texturing workshops but adds on the skills of coffee art. It provides a great overview of the espresso coffee world. Learn how to operate and clean an espresso machine, set and adjust the grind, explore the coffee menu, and make a cappuccino, latte, and flat white to industry standards. With the basics established, you will learn how to produce silky milk. You will focus on the techniques and skills of milk texturing. Develop your coffee art skills using etching and free pouring techniques. Dates: Please enquire for dates Duration/Time: 1 session, 9.30am-4pm Barista - Texturing Milk NA14MILK* No more froth and bubbles – silky milk! Focus on the techniques and skills of milk texturing. For those who have completed a coffee course and want to take their coffee skills to the next level. Develop your coffee art skills using etching and free pouring techniques. Limited to 8 to ensure one steam wand per person and maximising your time on the coffee machine. Participants must wear covered shoes. Dates: Please enquire for dates Food Safety Supervisor A3FOODS1 | Units from SIT31013 Certificate III in Catering Operations You will learn to identify and prevent food safety hazards, implement food safety skills, and safe food handling procedures. The course consists of a workshop conducted on-campus and a workplace assessment conducted in an appropriate environment at your workplace. You must be able to supply evidence of attendance at a food hygiene course within the last five years. Dates: Please enquire for dates Duration/Time: 1 session, 9.30am-4pm Safe Food Handling A3SFH1 | Units from SIT31013 Certificate III in Catering Operations Comprising three nationally accredited units, this course if for you if you need skills and knowledge to handle food safely. Learn the basics of personal hygiene, safe food storage and handling, cross contamination hazards, and effective cleaning and sanitisation. This course is a requirement for anyone working with food in a hospitality business. Dates: Please enquire for dates Duration/Time: 1 session, 9.30am-4pm Responsible Service of Alcohol – NSW IA08RSANSW* The RSA (NSW) certificate is relevant to all liquor licensees and bar staff, and those involved in the servicing of alcohol in New South Wales. This program gives students the skills and knowledge necessary to contribute to a safe, enjoyable environment in licensed premises. Dates: Please enquire for dates Duration/Time: 1 session, 6 hours
13 Wodonga TAFE Short Course Guide 2017
Responsible Service of Alcohol – Victoria IA08RSAVIC* The Responsible Service of Alcohol (RSA) is required for all liquor licensees and bar staff, and those involved in the serving, selling and supply of alcohol in Victoria. This program gives students the skills and knowledge necessary to contribute to a safe, enjoyable environment in licensed premises. Dates: Please enquire for dates Duration/Time: 1 session, 4 hours TRANSPORT, WAREHOUSING AND LOGISTICS FORKLIFT LICENSING Forklift Licence Training A3LF1 | Units from TLI32416 Certificate III in Logistics If you want to gain a start in the supply or warehousing industry, a forklift operations licence is a great asset. Successful completion of this course will see you gain the national high risk work (HRW) licence required to operate forklifts in a safe and efficient manner. You will also enhance your knowledge and experience in line with relevant legislation. 3 day course Dates: 23-25 Jan, 26-18 Apr or 26-28 Jun Duration/Time: 3 sessions, 8am-4.30pm Cost: Funded $383 Full Fee $545.50 4 day course Dates: 16-19 Jan, 6-9 Feb, 20 Feb-23 Feb, 6-9 Mar, 20-23 Mar, 3-6 Apr, 10-13 Apr, 22-25 May, 5-8 Jun or 13-16 Jun Duration/Time: 4 sessions, 8am-4.30pm Cost: Funded $415.50 Full Fee $578 5 night course Dates: 27 Feb-3 Mar, 3-7 Apr or 19-23 Jun Duration/Time: 5 sessions, 5pm-8.30pm Cost: Funded $405.50 Full Fee $585.50 Forklift Refresher Training A3LFREF1 | Units from TLI32416 Certificate III in Logistics Do you have a forklift licence but would like to brush up on your skills? Are you attending an interview and want your forklift skills appraised? Are you an employer looking to upskill your forklift operators? Let our industry-experienced trainers get you up-to-date with all the latest safe-operating techniques, provide awareness to current legislation, and benchmark you against nationally accredited training. Dates: 24 Feb or 23 Jun Duration/Time: 1 session, 8am-2pm Cost: Funded $110.60 Full Fee $250.60 HEAVY VEHICLE LICENSING Light Rigid A3LR1 | Units from TLI31216 Certificate III in Driving Operations This course is specifically designed for those people wanting to get a Light Rigid (LR) heavy vehicle driver’s licence. Holding a LR licence allows you to drive a rigid vehicle, including bus and truck, greater than 4.5 tonnes GVM but equal to or less than 8 tonnes GVM. Plenty of driver training time combined with theoretical and practical learning activities ensures this nationally recognised training is your best chance of successfully obtaining a light rigid licence. Dates: Please enquire for dates Duration/Time: 1 session Cost: $900 Medium Rigid A3MR1 | Units from TLI31216 Certificate III in Driving Operations This course is specifically designed for those people wanting to get a Medium Rigid (MR) driver’s licence. Holding an MR licence allows you to drive any two axle rigid vehicle, including bus and truck, greater than 4.5 tonnes GVM or a vehicle that seats more than 12 adults including the driver. Dates: 10 Jan, 25 Jan, 9 Feb, 23 Feb, 6 Mar, 22 Mar, 6 Apr, 24 Apr, 4 May, 15 May, 1 Jun, 13 Jun or 29 Jun Duration/Time: 1 session, 8am-4.30pm Cost: $1200
14 Wodonga TAFE Short Course Guide 2017
Heavy Rigid A3HR1 | Units from TLI31216 Certificate III in Driving Operations This course is specifically designed for those people wanting to get a Heavy Rigid (HR) driver’s licence. Holding a HR licence allows you to drive any rigid vehicle, including bus and truck, greater than 4.5 tonnes GVM. Plenty of driver training time combined with theoretical and practical learning activities ensures this nationally recognised training is your best chance of successfully obtaining a heavy rigid licence. Our Heavy Rigid (HR) course is conducted on a synchromesh or a nonsynchromesh gear box. Dates: Synchro: 23-25 Jan, 6-8 Feb, 20-22 Feb, 6-8 Mar, 20-22 Mar, 3-5 Apr, 19-21 Apr, 1-3 May, 15-17 May, 29-31 May, 14-16 Jun, 26-28 Jun Non Synchro: 16-18 Jan, 1-3 Feb, 15-17 Feb, 1-3 Mar, 15-17 Mar, 10-12 Apr, 26-28 Apr, 10-12 May, 24-26 May, 7-9 Jun, 19-21 Jun Duration/Time: 3 sessions, 8am-4.30pm Cost: $1350 Heavy Combination A3HC1 | Units from TLI31216 Certificate III in Driving Operations This course is specifically designed for those people wanting to get a Victorian or New South Wales Heavy Combination driver’s licence, non-synchromesh or synchromesh gear box. Holding a HC licence allows you to drive a dual axle prime mover with a dual axle semi-trailer exceeding 9 tonne, or rigid vehicle plus trailer greater than 9 tonnes gross vehicle mass (GVM). If you decide to get your licence with a non-synchromesh gear box option, you can drive either a non-synchro, synchro or auto gear box. Plenty of driver training time combined with theoretical and practical learning activities ensures this nationally recognised training is your best chance of successfully obtaining a heavy combination licence. Dates: 11-13 Jan, 23-25 Jan, 13-15 Feb, 1-3 Mar, 15-17 Mar, 27-29 Mar, 10-12 Apr, 26-28 Apr, 8-10 May, 24-26 May, 7-9 Jun, 21-23 Jun Duration/Time: 3 sessions, 8am-4.30pm Cost: $1500 Multi Combination A4MC2 | Units from TLI42111 Certificate IV in Driving Operations This course is specifically designed for those people wanting a Victorian or New South Wales multi combination driver’s licence. Holding a MC licence allows you to drive a dual axle prime mover with a dual axle semi-trailer exceeding 9 tonne, or rigid vehicle plus trailer greater than 9 tonnes gross vehicle mass (GVM). If you decide to get your licence with a nonsynchromesh gear box option, you can drive either a non-synchro, synchro or auto gear box. Plenty of driver training time combined with theoretical and practical learning activities ensures this nationally recognised training is your best chance of successfully obtaining a heavy combination licence. Dates: 30-31 Jan, 27-28 Feb, 23-24 Mar, 1-2 May, 15-16 Jun Duration/Time: 2 sessions, 8am-5.30pm Cost: $1670 Transportation of Dangerous Goods by Road A3DANG1 | Units from TLI31216 Certificate III in Driving Operations For heavy vehicle drivers wishing to hold a Transport of Dangerous Goods Licence, DECA trainers will equip drivers with the necessary knowledge, using the Australian Code for the Transport of Dangerous Goods (7th Edition). Dates: 6-7 Feb, 16-17 Mar, 10-11 Apr, 18-19 May or 5-6 Jun Duration/Time: 2 sessions, 8am-4.30pm Cost: $550 Certified Pilot Vehicle Driver A3PILOT1 | Units from TLI31216 Certificate III in Driving Operations Ever seen vehicles at the front and back of a truck that’s carrying a massive load? Those vehicles are ‘pilot vehicles’ and this is the course to be able to do it! This pilot vehicle operator course is a requirement for those who wish to either apply for, or renew a pilot escort licence through VicRoads. You will develop the skills and knowledge required by pilot vehicle operators to control traffic in the vicinity of an oversized vehicle. Dates: 16 Feb, 13 Apr or 23 Jun Duration/Time: 1 session, 8am-4.30pm Cost: $320 Rollover Prevention Program NA14STAB* Every year there is a significant amount of rollovers on Australian roads. These rollovers can result in injury or loss of life, as well as damage to vehicles, property and goods. While no single solution exists to prevent rollovers, the proper training in low-risk driving techniques and an understanding of new vehicle technology can help reduce the number of crashes. Loads that have a high risk of causing rollover include timber and livestock, which have a higher centre of gravity, or moving loads like bulk liquids/gases and concrete agitators. This program uses both theory and practical training in a specialised tanker combination to give professional drivers a greater understanding of vehicle dynamics and what measures they can put in place to minimise the risk of vehicle rollover. Dates: Please enquire for dates Duration/Time: 1 session, 8am-4pm
15 Wodonga TAFE Short Course Guide 2017
TRANSPORT Safe Towing NA15TOW1 Aimed at familiarising people with the correct method of towing, reversing and general handling of caravans, trailers etc. Duration/Time: 1 session, 9am-1pm Cost: $249.70 WAREHOUSING AND LOGISTICS Manual Handling and Injury Prevention A3MANHAN1 | Units from TLI32416 Certificate III in Logistics This course provides you with the skills and knowledge you need to shift loads using manual-handling methods, including how to assess the risks associated with relocating the load, how to plan the relocation process, and how to carry out the relocation in accordance with the plan. This certification is looked upon favourably by employers, as it shows you can safely move materials lowering risk to both yourself and goods damages. Dates: 17 May Duration/Time: 1 session, 8am-2.30pm Cost: Funded $127.60 Full Fee $267.60 Handling Hazardous Substances and Dangerous Goods A3HAZSUB1 | Units from TLI32416 Certificate III in Logistics This course provides you with the skills and knowledge you need to handle and store dangerous goods and hazardous substances, including how to identify requirements for working with dangerous goods and hazardous substances, confirming site incident procedures, selecting handling techniques, personal protective equipment, and separation requirements. Dates: 3 Mar or 12 May Duration/Time: 1 session, 8am-2.30pm Cost: Funded $192 Full Fee $272 WORK HEALTH AND SAFETY HSR Initial OHS Training Course NA14HSRI* This WorkSafe approved training course will help an HSR to understand and exercise their powers effectively. This training equips HSRs with the confidence, skills and knowledge to represent their co-workers and to help make their workplace safer. Although HSRs are the primary audience, managers, supervisors, health and safety committee members and anyone with an interest in health and safety may also benefit from attending this course. Dates: 6-27 Feb & 6 Mar or 24 Apr & 1-22 May or 26 May & 2-23 Jun Duration/Time: 5 sessions, 9am-5pm Cost: $900 HSR Refresher OHS Training Course NA14HSRRC* This WorkSafe approved Refresher training course will assist HSRs’ and Deputy HSRs’ understanding of how they can effectively use their powers when participating in the identification, prevention and control of the risks associated with workrelated violence. Dates: 20 Mar or 29 May Duration/Time: 1 session, 9am-5pm Cost: $360
16 Wodonga TAFE Short Course Guide 2017
17 Wodonga TAFE Short Course Guide 2017