Worldwide Independent Power – July 2021

JULY 2021 PROMOTING

ISSUE 227 ON-SITE POWER & COGENERATION

www.wipmagazines.com

www.powermediagroup.co.uk

POWERKITMSERIES Baudouin PowerKit is THE SOLUTION OF CHOICE for data critical backup power with market leading reliability, superior power quality and excellent total cost of ownership Comprehensive product line to meet a wide range of data center requirements

Robust and reliable for secure power provision

Dual starter options for increased redundancy

High transient and block load capabilities

Market leading warranty: 2 years, unlimited working hours

Data Center Power Solutions 590 - 2800 kVA

Durable. Robust. Built To Last.

Discover more at

Baudouin.com/PowerKit-diesel

EDITOR’S NOTES

JULY 2021 JULY 2021

www.wipmagazines.com

ISSUE 227

PROMOTING

ON-SITE POWER & COGENERATION

www.powermediagroup.co.uk

IT’S FINALLY HERE: A SIGNIFICANT NEW DEVELOPMENT IN ‘CLEAN POWER’ ELECTRICITY GENERATION IS NOW AVAILABLE

ISSUE #227 Richard Teasdale

Neb Saric

Aidan Turnbull

Alison Williams

Sarah Hallows sarah@wipmagazines.com

Bob Liu Shanghai, China bob.liu@ronco.com.cn

Jelena Milojevic

Mario Dobresko

renewables, and is polluting, noisy and harmful to the environment when using diesel generators. On-grid buildings in countries like Germany, the UK, South Korea, Japan and others generate high energy bills. Helbio’s Combined Heat & Power (CHP) system cuts the energy bill by 30% in these markets, solving the problem of expensive centralised energy.

Its technology is an alternative solution to conventional power systems designed for dual operation, either as an Auxiliary Power Unit (APU) delivering up to 5 kW electric power or as a Combined Heat and Power System delivering up to 7kW thermal energy with almost no atmospheric pollutants.

Said to be compact and silent

“

more than 35%. Compared to a diesel generator, it has much lower maintenance needs and emits 170 times less NOx and hydrocarbons, 27 times-less CO and no SOx, while consuming 54% less fuel. In addition, the system is multi-fuel fed, i.e. it can operate with either natural gas, propane/LPG or biogas. and construction of a hydrogen generation unit (fuel processor) and the integration with the

Power Media International Group, Sussex,

40m³/h hydrogen system.

RH12 1SL, UK need addressed is providing a reliable source of electricity independent of the presence or quality of electrical grid. www.powermediagroup.co.uk © Worldwide Independent Power

in order to achieve a cost reduction through economies of scale. In the prove the product’s reliability through a life cycle analysis.

Managing Editor www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

3

FEATURES

HYBRID PORTABLE GENERATOR SETS US$700mn in 2020, and is anticipated to expand at a CAGR of around 6.5% over the next 10 years, according to a revised report published by an

15

manufacturing industry back on track, demand is expected to bounce back over the coming months, a

MAKING SURE ALL IS WELL a power generation site in London to perform a were a few issues discovered during the inspection which could have been disastrous if left unchecked.

18| GAS ENGINES NEW 20MW BALANCING POWER STATION Flexible power plant developer and operator Conrad Energy is helping balance the UK electricity network supplied by Edina, a leading solutions provider for distributed power generation.

Following a highly competitive tendering process, Edina was awarded the contract to design, supply, install, test, and commission the 20MWe plant.

PUMPS & VARIABLE SPEED DRIVES ARE KEY

must be transmitted and distributed with minimal by variable speed drives play a vital role, as Frank

4

www.wipmagazines.com www.powermediagroup.co.uk

were supplied with four ELCOS gnereators powered then transported to the private hospital in Jeddah,

application and designed to cope with the harsh, desert environment.

20

,has played a vital role in maintaining the network in network transients (lightning surges, industrial loads, etc.), the system features an isolation transformer, a and a 16A and a 6A magnetothermal switch for two sections of the system which are also equipped with a fan heater to limit thermal problems.

how his company has reviewed European grid changes and analysed their impact on the requirements for power generating units like diesel generators which run in parallel with the grid. Local

www.wipmagazines.com www.powermediagroup.co.uk

5

FEATURES

JULY 2021

3

8

03 Helbio has designed and manufactured new H2-based gensets

03-16

NEWS REPORTS Comment and International News

15

15 We look at the impact of hybrid portable gensets on the world energy market.

24

26

ASSOCIATION NEWS

26 AMPS NEWS

What’s new from the world’s manufacturers.

24

Listings of key companies in the industry.

30 OEMs manufacturing engines today.

6

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

T/LL400 Liquid Level Sensor

CUSTOMERS FED UP WITH WASHING THEIR HANDS? WHY NOT FIT AN ELECTRONIC DIPSTICK?

fozmula.com a Rochester Gauges Company

NEWS

JULY 2021

INNIO JENBACHER & CLARKE ENERGY POWERING A NEW PASTA FACTORY IN DOUALA, CAMEROON

IN BRIEF

-

completed first phase was installation and commissioning of the containerised module, install an exhaust gas heat exchanger to recover the waste heat from hot exhaust gases process steamer for purification.

3.9MW CHP FOR THE AUSTRALIA’S LARGEST BEEF PROCESSOR -

es plant waste products by converting them to clean and substantial cost savings for the company whilst also reducing the site’s impact on the environment.

Energy to further grow its market share with 100% success rate over the last three years. intervene for any maintenance requirements, is reported to have significantly reduced the factory’s downtime. together with our customers to unlock the gas to power potentials in the energy-hungry commissioned engine aligns with Clarke Energy’s goal to remain a global leader in providing end to end energy solutions from feasibility studies to implementation backed by a strong after sales local support staff”. and we are happy to have reach this milestone in Cameroon as we are keen to expand our business in the Central Africa sub region.”

FRERK AGGREGATEBAU GMBH SUPPLIES AN EMERGENCY POWER SUPPLY FOR A DATA CENTRE IN GERMANY

been part of Rolls-Royce’s mtu-branded product portfolio for some years.

Preferences in the power generation market are trending towards

2,500 KVA ADDITIONAL GENERATOR FOR THE PHARMACEUTICAL INDUSTRY IN FRANCE -

to compensate for the natural volatility of solar and wind power by generating what is referred to as load-balancing power and also for

@ 1m with a 30m free standing also a double-walled fuel tank mounted under the container with a capacity of 35,000 litres, plus an overflow tank, fuel cooling and filtration installed in the container itself,

8

WORLDWIDE INDEPENDENT POWER

chro element achieved between six gensets and mains has

-

various interfaces, for example Ethernet, supported functions completely digital PLC. It provides complete management of start-up management, Faults monitoring and alarm and also , Power plant unit management. www.wipmagazines.com www.powermediagroup.co.uk

Discove r the new models

The all-round talent.

State-of-the-art components providing more power: the compact design, a focus on a wide range of applications and high efficiency values make sure of that. Controlled by the smart and secure TPEM (Total Plant & Energy Management), the new TCG 3020 series offers highest profitability and reliability. www.mwm.net/gas-engine-TCG-3020

NEWS

JULY 2021

IN BRIEF

EXHAUST GAS HEAT EXCHANGER FOR OPTIMUM HEAT UTILISATION PROVIDED FOR BIOGAS PLANT

designed the exhaust gas heat exchangers to enable operations with between one and four engines.

9MW ESP FOR A LEADING POULTRY BUSINESS PROVIDER

*Concrete drying *Wood chip drying * Fermenter heating * Substrate cleaning. world. Its expertise lies in exhaust gas and gas treatment technology. A qualified specialists in this field it can provide specific individual components or compact system solutions.

Since it was established

backup power to facilities such as the Automatic Feeding System, the Exhaust Cone Fan System, and the Hatchery Operations serving four

370 KVA GENSET SUPPLIED FOR A WATER TREATMENT PLANT IN FRANCE

has been synonymous with outstanding quality and reliability.

THE STAGE IS SET FOR THE NEW BRUNO GENERATOR - ‘THE STUDIOGEN’ -

Mounted on a solid welded steel base frame with anti-vibration mountings, the unit can be supplied in a sound-reducing and weather protected enclosure suitable for outdoor use. economical Generating Set diesel engine built on the dependable designed for easy, fast and economical installation. It has been rigorously field- tested to ensure high- est standard of durability and long life.

‘the ideal piece of equipment for the movie industry, where the slightest fluctuations in power frequency could affect lighting ‘.

product features designed into it. Self-regulation is achieved through

silent StudioGen generators

unit guarantees a constant supply from the generator. A rotating

designed to meet the particular needs of film

is manufactured according to, and complies with, the most common

Gen generators is consisting at moment of four models

also available with engines compliant. is highly customised and specially designed to be operator-friendly.

It includes many camlocks, a voltage selector switch, parallel operation

10

WORLDWIDE INDEPENDENT POWER

package, specific outlets for movie lights, courtesy outlets, trailers (on request) and much more to ensure great reliability and best performance.

All the units are soundproofed in ultra-silent galvanised steel canopies and equipped with an electric radiator with electric

ment system and its different management and funcionathe manufacturing of these units with a very compact example, is fitted in a canopy and it is characterised by a very low noise level of ~60

www.wipmagazines.com www.powermediagroup.co.uk

POWERING YOUR WORLD

adeltd.com

NEWS

JULY 2021

IN BRIEF DEUTZ COMPANY DEVELOPS NEW FACILITIES Deutz subsidiary Torqeedo, which makes electric drive solutions has laid the foundation stone for its new production facility the Airtech Campus (ATC) at OberpMunich, where it has had its head Michael Wellenzohn, member of the Deutz AG Board of Management said:“Consolidating the three current production sites in the new building will give us the space we need for further growth and enable us to further optimise our processes. It will also facilitate the collaboration between DEUTZ and Torqeedo on electric drives.”

SIEMENS IN MIDDLE EAST HYDROGEN COLLABORATION Siemens Energy says it is fully committed to the development of the entire hydrogen value chain and is is a pioneer in Green Hydrogen tech using proton exchange membrane (PEM) technology to convert electricity from renewables into ‘green’ hydrogen and oxygen. There is no waste or CO2 emissions.

Siemens has partneried with state utility DEWA to develop a green hydrogen pilot project that has just been commissioned.

In Saudi Arabia, NEOM is developing a gigantic hydrogen facility. There is a able technologies in Egypt, including green hydrogen. Morocco is already a world leader in renewable energy production and will leverage its experience to venture into hydrogen as well. The region received a further boost to its environmental credentials when Mubadala and Siemens Energy recently signed an agreement to work towards using renewable energy to produce green hydrogen and synthetic fuels, providing clean and transportable energy to fuel new hydrogen-based ecosystems. The aim is to advance technology jointly AND drive down green hydrogen and synthetic fuel production costs.

12

WORLDWIDE INDEPENDENT POWER

DON’T MISS POWEREX LIVE, LONDON, OCTOBER 6TH - THE PREMIER EVENT IN THE CRITICAL/STANDBY POWER AND ENERGY SECTORS IN THE UK & EUROPE TODAY Venue: The Park Plaza Hotel - Westminster - London: October 6th, 2021 Don’t miss this unique opportunity to interact with the world’s energy experts in several key fields: Gensets, CHP, District Heating, Data Centres and Energy Consultancy.

On October 6th, 2021, at the prestigious Park Plaza Hotel , Westminster, London, power professionals have the chance to get involved in • Two conferences under 1 roof in 1 day • A chance to hear to 20+ high quality power speakers • Visit 40+ Leading companies and Associations from the Critical Power sector exhibiting at the venue: FG Wilson, Kohler SDMO, Cummins, Clarke Energy, Edina, Crestchic, Durr Universal, HMS Industrial Networks, Industrial Power Systems, IPU Group, Leroy SomerNIDEC, Mecc Alte, Pramac-Generac UK, Punch Flybrid, Scania, Volvo - and many more.

• Key networking and industry event • Covid-secure venue • A major ‘AMPS Awards of Excellence’ (black tie) event is being held in the evening.

Dave Andrews, chairman of the Claverton Energy ‘Think Tank’, and a past conference organiser, commented: “PowerEx Live 2021 aims to offer the perfect networking opportunities for professionals across the spectrum of industry - generators, combined heat & power, data centre UPS and those concerned with renewable energy, emissions control and powerplant management. space in a world- class venue, this event becomes a priority for all those in the power and energy markets. In a post-COVID world you could not find a better way to catch up on the latest news and views from key players in the energy sector. What is more this show is entirely FREE to attend and register.”

Speaking for the PowerEx team, WIP Editor Aidan Turnbull commented:: “While fossil fuels have played a crucial role in shaping the modern world as we know it, change is coming.

Today, fossil fuels still supply roughly 80% to 85% of the world’s energy but the i nternational movement for Zero Carbon is changing things..

“Some of our speakers will comment on how governments around the world have been ramping up efforts to cut back on their fossil fuel dependence and support the transition to renewables. Some private companies – including even established oil and other fossil fuel producers – have also pledged to reduce their own CO2 emissions. This is why a show like PowerEx 2021 is so important in enabling everyone to keep up-to-speed on chages in legilsation and in the technology too.”

Visit the website: www.powerexlive.co.uk and simply register for easy access-all-areas on the day.

www.wipmagazines.com www.powermediagroup.co.uk

NEWS

JULY 2021

IN BRIEF THREE 3,168 KVA & ONE 1,600 KVA GENSET FOR THE WAITSIA GAS PROJECT -

processing plant with a 15-year life-cycle which will convey gas via the

A NEW PATENT-PENDING SAE J2044 COMPATIBLE FITTING ENGINEERED TO ALLEVIATE THERMAL ISSUES WITH UREA

Connectors Group, has developed a new patent-pending fitting designed for SCR dosing brought about by thermal extremes and provide a simple, reliable connection technology.

Gas Pipeline.

Penske Australia will supply three components that can absorb the additional volume by expanding. Hose assemblies and plus two EnergyPack battery energy

those used in typical low-pressure applications.” psi with continuous operating temperatures ranging from -40°F (-40°C) to 257°F (125°C).

J2044 endform becoming the de facto industry standard for after-treatment components industry to take advantage of readily-available J2044 quick connect fittings.”

Parker’s J2044 stainless steel body incorporates dual O-ring glands and eliminates the need for an additional retainer and a low-profile stainless steel spring clip is used to lock the fitting to the male endform. components by 50% and utilisation consistent with Parker’s Simple by concludes.

PT AKSA POWER INDONESIA IN 1.3MW DIESEL GENSET CONTRACT

Generators are produced in manufacturing facilities in 20.000 m² of indoor space), of indoor space) and Louisiana (U.S.A., 10.000 m² of indoor space) - and also a trade centre lands 2000 m² of indoor space) www.wipmagazines.com www.powermediagroup.co.uk

which has become a leader and pioneer within the sector. AKSA Power Generation aims to rank among the top three global manufacturers by 2025.

AKSA Power Generation opened one of the largest genset factories in the world in May 2012. AKSA further secured its place among the biggest genset companies in global market with its 120,000m² (indoor space) factory.

In China an AKSA factory is producing 24,000 diesel gensets annually. In addition, it has 16 test rooms which are equipped with the latest total test capacity.

WORLDWIDE INDEPENDENT POWER

13

NEWS

JULY 2021

IN BRIEF GENERAC LAUNCHES ‘ALL-IN-ONE’ TOWER

GREEN DATA CENTRES: THE KEY TO DRIVING SUSTAINABLE STRATEGIES: JACK BEDELL-PEARCE OF 4D DATA CENTRES -

industry should keep energy consumption at sustainable levels by using green tech in data centres. After all, we’re growing ever more dependent on the kind of technology rental companies a tower that allows end users to choose their preferred from an integrated/rechargeable system alternating battery working with diesel replug-in option with external power for simultaneous operation & battery charge.

and machine learning, all of which require data centres to operate. address the energy usage of data centres, but this process will need to be accelerated if consumption is to be kept to a minimum, especially when considering that data lockdown.

Immersion cooling represents a practical measure for addressing challenges sees computer components or even full servers being immersed in a dielectric liquid that enables higher heat transfer

site that uses immersion cooling technology.

equipment. and water, via an internal heat exchanger that extracts heat from the fluid and redistributes it into chill water, which is subsequently pumped away and cooled towers, a similar process is used in the automotive industry.

Another way data centres can be more sustainable is by harnessing renewable energy sources. With electricity being the primary source for running daily operations, a single data centre’s environmental impact will be largely determined by where it gets its electricity from. resources and location, there is scope for data centres to implement a set-up that relies more on environmentally energy sources, such as wind, solar or even tidal.

THREE 2,000 KVA ENERAQUE GENSETS BOUGHT FOR A KEY AUSTRALIAN DISTRIBUTION CENTRE From 10kva to 3000kva, Eneraque diesel generators are fully customised and can be built with any genuine in three 40’ steel containers have been installed onsite at the Woolworths Heathwood

14

WORLDWIDE INDEPENDENT POWER

the units was seamless on a very busy site, and was a

engines, Perkins generator engines, Cummins generator engines, Kuboto generator engines and more.

Eneraque has a reputation for delivering high quality, custom-built solutions with

Eneraque specialises in custom-built high quality diesel generators and turnkey power generation solutions to suit client requirements.

services. ENERAQUE custom-built generators cover a full range of customisation and can run on several power sources,.”

www.wipmagazines.com www.powermediagroup.co.uk

MARKET REPORT

JULY 2021

ACCORDING TO FACT.MR, THE GLOBAL PORTABLE GENERATORS MARKET WAS VALUED AT US$ 700 MILLION IN 2020, AND IS ANTICIPATED TO EXPAND AT A CAGR OF AROUND 6.5% OVER THE NEXT TEN YEARS.

“HIGH R&D SPENDING COUPLED WITH TECHNOLOGICAL ADVANCEMENTS IN PORTABLE GENERATORS IS EXPECTED TO AID MARKET GROWTH IN HYBRID PORTABLE POWER GENERATORS OVER THE COMING YEARS.” - A RECENT FACT.MR REPORT generators, attributed to changing consumer preference along with stringent environmental policies laid down by government bodies. market is anticipated to add a significant value by 2031.

demand is expected to bounce back over the coming months. advancements in portable generators is expected to aid market growth over the coming years,” says a Fact.MR analyst.

Market players have been spending on research & development to come up with new, innovative products such

For instance, diesel generators are banned across various cities of Europe citing high levels of emissions.

In order to tackle the emission problem without compromising on electricity supply, market players have come up with hybrid generators which can significantly reduce emissions.

segment is expected to capture

generators have garnered increased attention in recent years. Moreover, high spending

in Africa expected to rise at a high single-digit CAGR through 2031.

Hybrid generators combine fuel used by traditional generators with an external renewable energy source to

the way for innovative hybrid

demand for portable generators suffered in 2020, which saw a

are charged by a renewable power source, such as solar power, wind power or hydropower.

Some common types use a charged battery and feature

segment over the next ten years.

On the basis of power output, portable generators with power outputs ranging from 1.0-3.0 Kw hold substantial part of total revenue share of the market.

growth of the portable generators industry in the medium- to the long-term forecast period.

dominate global market revenue

dual fuel technology of the device ensures that it can operate an option in case one of the fuel is scarce.

Fact.MR, presents an unbiased analysis of the global portable generators market, presenting historical demand data (2016-2020) and forecast statistics for the period of 2021-2031. based on the power output (less than 1.0 kW, 1.0 to 3.0 kW, 3.0 to 5.0 kW, and more than 5.0 kW) end use (commercial, residential, industrial, agricultural, and others), application (standby backup power and continuous power), across six Europe, Japan, APEJ, and MEA).

For more information, refer to the full market research report [ ] or contact Consultant Shubham Patidar on shubham@factmr.com www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

15

MAINTENANCE

B

artech Marine Engineering attended a power generation site in London recently to perform

According to the company there were a few issues discovered during the inspection which could have been disastrous if left unchecked. that the pre-combustion chamber pockets were showing signs of gas passing. with this aspect onsite, and instead the heads needed While pressure testing the exhaust, engineers also

party - arrived onsite, and upon initial inspection, it was discovered that the threads around the cooler had been damaged and not repaired properly, so it was impossible to mount the intercooler. repairs, and once in the workshop, enginnering inspected the cooler and ensured all damaged threads were Heli coiled. Where threads had previously been poorly Heli coiled at angles, they were drilled out to a

16

WORLDWIDE INDEPENDENT POWER

JULY 2021

before being re-drilled to the correct

with coolant the bleed/drain valves leaked, so engineers sourced and Whilst in the workshop, the engineering team inspected the cylinder heads and found that the bottom machined face which seals on the pre-combustion chambers were worn. When the pre-combustion chambers were removed, there was evidence of gas passing, along with reports from the customer of rising coolant pressure. Each head was dismantled, the lower seat re-cut and then lapped to create a perfect seal. Following this, each head was reassembled and pressure tested to

down on new studs using hydraulic exhaust damper was then inspected as it was reported that it was not closing properly and was leaking.

When the cover was removed it was found the seal was in poor condition so when closed, it could not seal - a could have lead to engine overheating, gases escaping into the engine room and further issues.

Once returned to the site, each cylinder head was mounted with new

www.wipmagazines.com www.powermediagroup.co.uk

MAINTENANCE

JULY 2021

investigate reports of a Holset turbocharger leaking lubrication oil into the turbine housing at a power plant, causing the operator’s coolant engine to consume the dismantling, cleaning and inspection of the turbocharger. reliability of Holset products rest in the attention to Critical parts such as the bore and shaft straightness are measured with tolerances as small as one micron (a strand of hair is 75 microns and a red blood cell is replacing a Holset turbocharger for OE cannot be easily be replicated. turbocharger was given an initial visual inspection, before dismantling began. With the core assembly removed evidence of small quantities of lubrication oil was found entering the turbine housing, this could only have originated from the core assembly. leakage at this stage, as all seals and assemblies were still tight.

-

housing. New piston rings were mounted onto the turbine shaft and installed, along with the turbine heat shield, into position in the bearing housing. and thrust bearing were installed into the compressor side of the turbo. piston rings and inserted into the insert, this was pushed into position

compressor wheel from the turbine shaft, extraction of

secure it in place.

spacers and thrust bearing.

No signs of leaks or evidence of damage to any component parts were observed.

It was evident to the engineering team that lubrication oil was passing the piston sealing rings on the turbine side of the turbo and allowing lubrication oil into the

installed and torqued to the man-

accurately calculate as only small residue amounts were found, but larger quantities could have drained from the core assembly when removed or transported to It was subsequently recommended that the turbine shaft should be balanced, and the turbo rebuilt with a new overhaul kit and replace any defective seals or rings. Additionally the turbo rig was put on a governor

to be taken and the turbocharger returned to the customer.

the balancing marks were carefully aligned. manufacturer’s tolerances the Axial Clearance and Radial Movement had to be measured. housing was mounted into the turbine housing and torqued down. A

delivery port and a visual inspection conducted to endure no oil was conducted for two minutes and no leaks were evident. with the original orientation marks, and the securing bolts torqued down. the ingress of dirt and the overhauled unit packaged for return to the customer.

Again, the lesson of this second Case Stuidy is that regular maintenance and checks on your critical engines not only ensure their to catch issues before they become costly, both in terms of money and downtime.

If you are unsure of the correct maintenance intervals for your engine or know you a service is due soon, get in touch we’d be happy to help.

[Axial Clearance = 0.003” and Radial Movement = 0.017”]. within the manufacturer’s tolerances, allowing the testing of the piston oil seals to commence. and the bearing housing attached to

balancing. Upon its return, the turbocharger was rebuilt using a new overhaul kit, consisting of replacement bearings, piston rings, O-rings, circlips, lock nut and thrust bearing.

passed through the lubrication oil

bushes were lubricated and inserted into the bearing housing. New piston rings were mounted onto the turbine shaft and installed, along with the turbine heat shield, into position in the bearing housing. for balancing. Upon its return, the turbocharger was rebuilt using a new overhaul kit, consisting of replacement bearings, piston rings, O-rings, circlips, lock nut and thrust bearing. bushes were lubricated and inserted into the bearing www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

17

GAS GENSETS

F

JULY 2021

lexible power plant developer and operator Conrad Energy is helping balance the UK electricity network with the energisation of its

a leading solutions provider for distributed power generation.

Following a highly competitive tendering process, Edina was awarded the contract to design, supply, generation plant as part of Conrad Energy’s growing portfolio of energy balancing and renewable power

Edina containerised all 10 MWM engines at its in-house engineering facility for ease of installation and ongoing maintenance access. attenuated and ground-level radiators were installed

With the closure of large, centralised in renewable energy generation from intermittent and unpredictable sources, plants of this type are vital in meeting growing energy demand. relieve increasing stress in the system and is considered a viable and sustainable solution to support the growth in clean energy technologies onto the grid. from 1 - 2MWe and are perfectly suited to the high demands of a broad application spectrum. Worldwide, MWM have in operation totalling almost 3GW of electrical installed capacity.

ments and provided sound engineering advice which was instrumental in helping us identify and create an

types including natural gas, biogas, sewage gas and can accommodate a blended hydrogen mix.

Smaller dead spaces in combustion chamber, which ensure more complete combustion, as well as reduced fuel consumption and CO and HC emissions enable gas savings of up to 15 percent

developed,” comments Steve Conry, Construction

the plant.

get, reports the company.

-

Edina’s MWM engines will provide fastresponding dispatchable power to support grid stability by balancing supply and demand variations within the electricity network.

Unlike base-load power plants which run operate approx. 2,000 hours annually as part of its UK Capacity Market obligation to supply backup power to the network during periods of system stress when weather conditions prevent renewable power generation.

When the climate prevents the sun from shining

utilising the returned combustible return and the improved separation of the gas phase and liquid phase enable longer maintenance intervals for the turbocharger thanks to the clean intake air leading to lower operation costs.

ity together with low lifecycle costs and

landowners, and developers can secure lucrative balancing contracts by supporting the electricity network during periods of system stress. generation market, Edina strongly advise that a site’s suitability is considered at the early stages of any include points of connection (electrical and gas), easements, civil works, noise impact assessment, dispersion study, site access, and more.

Edina is one of the UK’s largest installers of gas engines within the peaking installation took place in 2014 Wales, and since then, the market opportunity has grown exponentially with Edina providing over 450MW electrical installed capacity spanning sector.

If you are interested in learning more about the peaking sector or looking to develop a site capable of utilising MWM gas engines to maximise the trading avenues, we have a wealth of knowledge and support to guide you through the process to help mitigate risk and unexpected costs and deliver a support solution to meet your strategic requirements.

For more information or to discuss contact us at

-

help keep the lights on by producing enough electricity to power almost 11,000 local homes as calculated by the latest OFGEM publication.

18

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

DISTRICT HEATING

JULY 2021

D

istrict heating systems play an important

mitted and distributed with minimal cost and energy

explains. system of insulated pipes that take heat from a central source and deliver it to several domestic or non-domestic buildings. a dedicated supply to the heat network, such as a combined heat and power (CHP) plant. Or it could be heat that is recovered from industrial sites, such as large data centres, or energy from metal processing or chemical plants.

Heat networks provide an opportunity to exploit

reduces energy consumption in heat generation, transmission, and distribution processes.

energy use and to identify areas of improvement for the entire system, while also improving operational resilience.

As a practical example of what is Autonomous Prefecture Heat Himalayas.

recovered heat sources that otherwise cannot be used.

pollution caused by wood-burning stoves that were the primary source of heat for its 50,000 residents.

50 kilometres and, at their largest, can encompass an

steam to water heat exchanger in the boiler room to the end-user installation.

will service a single campus or a village.

Regardless of the energy source, district heating

equipment needed to provide heat to

individual heating. It can unlock multiple opportunities for renewable thermal energy and residual heat from industrial processes, sewage, waste incineration. It also enables Power-to-X technology by converting surplus electricity to heat, which can be stored and used later.

solutions interconnect and monitor the new heating plants for maximum

heat-only boilers and stoves to boilers based on electricity. of life substantially by reducing coal-

communicate with the central control and monitor the system to deliver heat heating systems has provided About 17,000 tonnes of coal is no longer burnt in Shangri-La every year, which is the equivalent of 105,000 tonnes in annual carbon-dioxide emissions, and means dust emissions are reduced by 460 tonnes.

Cities around the world have a great deal to gain by Investing in the deployment and development of district heating. In particular, using smart digital solutions to connect multiple heat sources and facilitate control and planning according to forecast availability will make it possible to start leveraging the available energy faster.

have enabled the move from individual

important role in providing precise pump control for the needs of the building while ensuring a comfortable environment for the occupants.

60% compared with solutions that rely on the

www.wipmagazines.com www.powermediagroup.co.uk

WORLDWIDE INDEPENDENT POWER

19

GENSETS

JULY 2021

W

hen a a private hospital in Jeddah, Saudi Arabia needed backup power gensets it turned to ELCOS Power Generators.

ELCOS has been operating in domestic

is well-known as an independent group which designs and produces power generation systems for the international market. insulation class of the alternators were a key platform to meet stringent Saudi requirements.

In more than 50 years of activity ELCOS has developed, all designed and built a wide range of solutions in close collaboration with customers. and simplicity of Elcos products, together with the speed and Italy but i nternationally, reports the company, of automatic and manual panels for generating sets, mains/generator switching panels, control units, battery chargers, water and oil heaters for diesel engines.

instruments, monitoring and alarms

connections and remote control.

Also produced by the company is the A simple protective unit for diesel engine. warning light for the various faults that can be linked. Its container, completely sealed in resin and makes it suitable for installation in most envrionments. the ELCOS anual panels designed for installation in power generators,

alternator..

experience in its sector, all products have been developed to best meet requirements in all applications.

board. It comes equipped with digital instruments, signals and warnings on

assembled in Italy and transported to the private hospital in Jeddah

is an Auto Mains Failure control unit designed for the panel of a emergency genset. It features digital

More information?

award of supply.

ELCOS researches and develops products that use innovative technologies in order to optimise its customised product. able to meet the power requirements of the private hospital. known, reliable and appreciated brand in Saudi Arabia.”

ELCOS S.r.l. currently designs and produces manual and automatic switchboards, control units, remote monitoring systems, battery chargers, water heaters, oil sump heaters and other components for use on standard) and other applications of industrial diesel motors such as motor welders and specialist motor compressors..

20

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

UPS

JULY 2021

W

hat prompted an independent Wi-Fi applications? Here, the answer is

Instruments Ltd. who were able to appreciate the necessity for a reliable wireless network in remote and rural areas of Italy.

saw an opportunity to provide a service.

cellphone.

application is one of the Adel Systems cabinet, to take the load in the event of the mains failing, must be conbackup power source in the event of the AC failing. the batteries be under constant itors them every 2 hours when the AC is present, by running through a series of load tests and charging tests to battery health.

500 and the new wireless network was the the only hope for the local population to be connected to the increasingly globalised world.

transients (lightning surges, industrial loads, etc.), the system mounts an isolation transformer, a system of surge arresters, a self-starting

the province of Pavia were covered by the system.

Over the years the system has won awards and partnerships within Italy and across Europe.

magnetothermal switch for two parts of the system which is also equipped with a fan heater to limit thermal problems.

networks in these areas are entrusted to smaller companies which are address region and locality Agenda.

service availability, transparent management via web portal on one side and low cost to the consumer on the other, to allow access to the broadband connection

with isolation transformers. In the case of connection cable lengths greater than 15m, it is preferred to use

of Adel System is strategic, increasing the duration of the 2 batteries, in this case from 100 Ah, thanks to the multiple types of recharging available adaptability algorithms and battery testing function are essential for accurate diagnosis. impedance of the battery, the element in short circuit and will disconnect from the battery to prevent deep discharged.

the battery for the power source and the service to the consumer continues uninterrupted. following points on why they chose •We supply the power to the load and manage the battery with a single device- simple installation •With a single device the system has power backup supervised to optimse the service life of the batteries and to be warned in advance if they it is possible to make a remote diagnosis via Modbus of all the system analysis parameters by monitoring the site remotely. with very limited costs.

-

chargers, Powers and remote Instruments Limited please visit or call 01206 575755 email sales@ tvri.co.uk If you want to know more about

-

which allow the system to be more reliable over time.

base stations are supported by an uninterruptible power supplies as rural AC supply is not as stable as in the wireless network up for a few hours. www.wipmagazines.com www.powermediagroup.co.uk

range.

WORLDWIDE INDEPENDENT POWER

21

GENERATORS

T

he energy generation sector in Europe is changing with the emergence of renewable

Product Manager, Kohler.

In the past small numbers of large-scale gas, coal, or nuclear power stations worked together in a centralised network. However, the current trend is towards a distributed model with large numbers of smaller, renewable power generators. outstrip centralised generation by a factor of 5-to-1 by 2024 .

Regulators are wrestling with the impact these changes will have on the performance of the grid.

Renewable power generation is more variable than number of suppliers also adds to the complexity of the grid. As a result of these challenges, grid codes are being developed to control the connection of power-generating modules to the grid.

While Europe-wide grid codes are still under discussion, some countries like Germany and UK have already implemented local regulations. Kohler has reviewed these trends and analysed their impact on the requirements for power generating units like diesel generators that will run in parallel with the grid.

JULY 2021

generator to respond to changes in voltage, also known as fault ride-through. Generators meeting the code requirements will supply reactive power to the grid in the case of a disturbance, therefore keeping the network voltage at an acceptable and performance must match the grid’s requirements to maximise grid stability and robustness in the case of disturbances.

While the implementation of the NCRFG is still in progress, some individual nation-states have already enacted their own local rules, which take into account the broader code.

For example, Germany has adopted power generators connecting to the grid. built and connected in compliance with both the local and broader European codes. Kohler has developed an approach to help navigate this designs.

codes of the present and the broader European codes of the future, Kohler has embarked on a forward-looking approach to establish a range of product range gives customers capability to meet the grid requirements and their ongoing compliance.

name to indicate their compliance generators ensures that customers can obtain grid connection approval Power generation in Europe is moving towards a distributed model due to the increase in renewable to continue and grow in momentum.

As such, the grid is becoming more susceptible to power disturbances and requires a new approach to stabilisation.

European Union Network Code on Requirements for Generators (NCRFG) . power generating modules and increase the security countries have adopted local codes in advance of the European regulations.

Historically, generators running in parallel with the grid were disconnecting from it in case of grid disturbance and continuing to operate in islanded mode. but the new grid code now imposes them to maintain a connection and support the network to recover its nominal parameters.

In fact, the contribution of power generating modules generator. It is important to note that local codes may power thresholds for each category. breakdown for power generators. and frequency, reactive power and voltage, as well as connection and reconnection conditions. In addition, the concept of dynamic grid support enables the

22

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

Noise control experts

Keeping your world clean, quiet, and safe. Dürr Universal is a global leader in the design and manufacture of inlet and exhaust systems for gas turbines and reciprocating engines in the OEM and retrofit markets. www.durr-universal.com Dürr Limited United Kingdom

Phone +44 1455 8944 88 Email solutions@universalaet.com

ASSOCIATIONS

DECARBONISATION SUPPLY CHAIN DEVELOPMENT IN LONDON - CALL FOR EVIDENCE

*Identifying and quantifying the existing decarbonisation supply chain in London. *Identifying training providers and courses for individuals, as well as support programmes for the supply chain. *Mapping and engaging with key stakeholders. * Identifying focus areas for upskilling and retraining. chain capabilities and capacity requirements in line with regional growth scenarios.

In partnership with the GLA, the ACE Research team has developed surveys Our focus is to find out what courses are on offer that link to decarbonisation and at what level of qualification, and moreover, organisations’ ambitions to deliver more qualifications in this area. * Supply chain actors Our focus is to find out what registered organisations within London’s supply chain are doing, what are the barriers to upskilling in decarbonisation activities? and what is the business ambition to deliver retrofit across the Greater London Authority?

JULY 2021

ACE LAUNCHES CONSULTANCY 4.0 TO SHOWCASE THE BEST OF THE SECTOR

Across four roles and 12 services, Consultancy 4.0 demonstrates how consultants have adapted to deliver in a changing world, why they should choice” for both public and private clients, and how to collaborate to get the most out of any close working relationship.

Outlining how clients’ understanding of consultancies may be out of date, the engaging web-presence at www.acenet.co.uk/ consultancy-40 features a number of innovative case studies from ACE members showcasing their expertise, and builds on previously released research, webinars and articles from the Future of Consultancy workstream.

Commenting on the launch, ACE’s our sector’s response to the fourth industrial revolution. perceptions of our industry with many clients simply unaware of what the consultancy sector now offers with many new services built on data, expert insight and analysis.”

Please note that these surveys are only open to those organisations with an education facility or office/operations base in London.

We would welcome industry members who want to share details of these surveys across networks and social

24

WORLDWIDE INDEPENDENT POWER

best that our industry has to offer, the website demonstrates how our members are already delivering products and services across the entire life-cycle of assets and working with clients in surprising ways.”

73RD ANNUAL IPOWERE LUNCHEON & TECHNOLOGY SEMINAR THURSDAY 28TH APRIL, 2022

[Above: Key Speaker Dr Cathy McClay]

Luncheon is to be held at the Leonardo Royal commence at 10.00am with a technology seminar, followed by a 3-course luncheon and guest speakers in the afternoon. multi-stream programme covering a range of be something which is relevant to everyone’s business. established as a key event in the calendar of the power and prime mover industries and is an occasion not to be missed. to catch up on the latest technology developments and to hear and engage with internationally-renowned speakers, plus the chance to network with other members, clients, colleagues and friends, old and new.

Strategy at Sembcorp Energy

admission to seminar and luncheon Please be assured that any tickets booked for 2020 will be carried over to this new event.

www.wipmagazines.com www.powermediagroup.co.uk

TOTAL CONTROL FROM EVERY PERSPECTIVE Anyone who knows gensets, knows Mecc Alte. But did you know that – as well as world-class alternators – we can also provide the controllers you need? Whichever way you look at it, Mecc Alte gives you the choice of kit you require, backed up by all the support and unbiased advice you only get from the world’s leading independent alternator specialists. Take 360° control. Talk to Mecc Alte.

The world’s largest independent producer of alternators 1 – 5,000kVA

FOR FURTHER INFORMATION VISIT WWW.MECCALTE.COM

AMPS

JULY 2021

B

stage on which some of golf’s most exhilarating dramas have played out.

Its meticulous design involves tight fairways, perilous bunkers, lakes and fast undulating greens have challenged some of golf’s greatest players over the years.

As you’d expect, it’s a challenging golf course, but a must-play for anyone who’s serious about the sport.

More recent changes have seen the 6th hole become one of the most demanding, rated highly by modern-day great Lee Westwood. was the venue for the AMPS Golf day.

& Firepro

to everyone who attended, played, and sponsored holes the comments received on the day and afterwards it everyone - a truly successful day. Here’s to many more.

Industrial Power Systems PFS Fueltec Wernick Power Solutions

Fueltec - 44 points Power Solutions - 36 points (won on countback) - 36 points

Power Solutions

AMPS would like to thank all the companies and individuals who Cabel, Crestchic, ComAp, Eminox, FIA (Fire Industry Association) Firepro, HMS Industrial Networks, Industrial Power Systems, IPU Group, Genovate Power Solutions, JEC Electrical, Mecc Alte, MEMS Power Generation,

abandoned golden retrievers and other breeds, many coming from Sam and Hollie were rescued a in a real state, unwanted and both re-homed together and are living the Happy Paws dream, so their loving family wanted to give back to the charity to allow more dogs get the life they deserve. of AMPS from the charity.

We are already looking at next year’s 2022 event - this may possibly be a shotgun 72-people event plus guests in the evening to be held in the North West region. sit down meal with event speakers, industry discussion, comedian with networking into the evening afterwards.

As always, we are working to make possible and hope to have some further prices and more details with you over the next few months.

Consulting, WEG and Wernick Power Solutions.

AMPS were very pleased to raise £725 for charity, a very generous donation of £500 which was raised of Industrial Power Systems Ltd. who is pictured (left) handing over a cheque to the chosen charity, ‘Happy

26

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

AMPS AWARDS OF

EXCELLENCE WEDNESDAY 6 OCTOBER 2021

Park Plaza Hotel, Westminster Bridge, London AWARDS: • Business growth and strategy • Developing Diversity & Talent • Energy and Sustainability award • Health and Safety award • AMPS Member Company of the Year • Exporter of the Year • Innovation and Technology Award • Environmental Product of the Year • Apprentice of the Year • Project of the Year • Engineer of the Year Tickets £175pp or £1,650 per table of 10 (+VAT)* Sponsorship Packages available.

Contact Richard.teasdale@amps.org.uk to book and for further information www.amps.org.uk

PRODUCTS & SERVICES

JULY 2021

DVC 550 SOLVES RELIABILITY PROBLEMS AND ADDS FLEXIBLE CONTROL

-

NEW EFRAME GEN-SET ENCLOSURES Atlas Copco is a well-known multinational manufacturer of industrial tools and equipment headquartered in Sweden. It manufactures and sells a broad range of products, from stationary Rental division, virtually everything that the company sells can also be rented, including its unique offering of generator solutions for demanding applications such as the oil and gas industry and offshore wind turbine commissioning. reduces fuel consumption and CO2 emissions up to 40% on varia

the complete design, production, and testing occurs right at of the entire manufacturing and testing process to ensure the highest quality while significantly decreasing lead times, which is very important for data center customers that operate under tight timelines.”

integrated Power Management System that switches the two power packs according to the load requirements. and maintenance costs, better generator load profiles, and easier regulations.

In order to work efficiently, however, twin-power units must be able

industrial generators rated 2000 kW and larger, and is a field-proven voltage regulator was chosen because it meets all of our application requirements. an all-aluminum skin and frame construction and a fade/ enclosures meet or exceed 135-mph wind load ratings, the company said. Additionally, the entire power system is a totally integrated package, with all components single-sourced from the Kohler factory including engineering, manufacturing and testing.

complete unit has to withstand the elements as well as quick and operational handling down to the smallest parts. Reliability is crucial, and a malfunctioning switch could have severe

alternator and controller settings.”

flexibility, reliability, user-friendliness, and communication options of

power to handle transformer magnetisation peaks.

-

magnetisation peak of the transformer was too high, so once every five times one of the generators would shut down due to

NIDEC LEROY- SOMER LAUNCHES ITS NEW LSAH 42.3 ALTERNATOR

solved. It’s been a couple of months now, and no problems so far”,

public buildings central heating.

Paralleling with the public network for the resale of elec42.3 offers premium performance, especially in situations of intensive use.

28

WORLDWIDE INDEPENDENT POWER

www.wipmagazines.com www.powermediagroup.co.uk

CLASSIFIED

DIRECTORY OF EQUIPMENT & SERVICES

Innovative technologies for gas treatment and exhaust systems Make it a system with APROVIS.com James Bexon

ITALIAN MANUFACTURER OF GENERATING SETS FROM 3kVA TO 2250kVA

sales@energy-gruppi.it | www.energy-gruppi.it

LAUNCH OF Heating & cooling thermal management technologies

IN JULY 2021

www.hotstart.com

PROMOTING CRITICAL/ BACKUP POWER, ENERGY STORAGE & COGENERATION

Alternators Made in Italy

Exclusive suppliers of DEIF and Huegli Tech Control and Protection Equipment to the Power Generation Industry Tel: +44 (0)1942 932100 Email: sales@indps.co.uk Web: www.indps.co.uk

Viale del Lavoro, 30 - 37040 Arcole (VR) Italy T. +39 045 7639201 - F.+39 045 7639202 info@linzelectric.com - www.linzelectric.com

ENERGY WHERE NEEDED with INNOVATIVE SOLUTIONS COGENERATION

THERMAL

CYCLE PLUS

GEN SET

SHORT BREAK

STATIC GAS

POWER PLANT

STORAGE

SOLAR CYCLE

OIL & GAS

MARGEN s.p.a.

Via Dino Ferrari, 50 - 41053 Maranello (MO) - Italy +39 0536 94.36.15 info@margen.it www.margen.it

Service and product provider, specialising in the power genera on industry. Sole UK & Ireland distributor for CRE Technology.

Exper se in land & marine applica ons including: G59/3 Relay Tes ng Single/Mul Running Systems Paralleling Systems to the U lity AVR Replacements Contact: Mr Alistair Hickey Tel: +44 (0) 161 818 8720 Email: sales@totalgeneratorsolu ons.com www.totalgeneratorsolu ons.com

Advertise in this section for 1 year in all 27 publications for as little as £65p/m.

Leaders in complete power solutions Hire, Sales, Service & Maintenance, Contingency Planning, including 24/7 Emergency Response

www.precisioncontrols.co.uk

This includes digital & print copies.

Goes out to 28,000+ high quality postal & digital subscribers.

Contact

power@wipmagazines.com

WOODL ANDSPOWER.COM UK : 0845 600 3335 | INTL : +44 138 644 2622

NOTES

ENGINE MANUFACTURERS GUIDE

R Schmitt Enertec GmbH

INNIO Jenbacher gas engines

Headquarters: A-6200 Jenbach (Austria) T +43 5244 600-0 F +43 5244 600-527 jenbacher.info@ge.com www.gejenbacher.com Manufacturer of gas driven generator sets and cogeneration systems in a power range from 0.25 to 3 MW. Model JMS 208 GS JMS 208 GS JMS 312 GS JMS 312 GS JMS 316 GS JMS 316 GS JMS 320 GS JMS 320 GS JMS 412 GS JMS 416 GS JMS 420 GS JMS 612 GS JMS 616 GS JMS 620 GS

Fuel

rpm

g g g g g g g g g g g g g g

1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,500 1,500 1,500 1,500 1,500

Pel

Pth

330 335 625 633 834 848 1,063 1,060 844 1,131 1,415 1,820 2,433 3,041

358 406 731 808 988 1,079 1,190 1,313 892 1,194 1,492 1,792 2,399 3,020

m3N. Dry exhaust gas; based on 5% O2. For engines with 1,200 rpm please contact GE Energy’s Jenbacher product team.

TAD1242GE TAD1640GE TAD1641GE TAD1642GE

352 393 433 485

409 462 509 570

Perkins Engines Company Limited

Peterborough PE1 5FQ Contact name:- Simon Gray Tel: +44 (0) 1733 583000 Email: gray_simon_j@perkins.com Perkins is one of the world’s leading suppliers

56743 Mendig, Germany T +49 2652 9351810 F +49 2652 9351822 info@rschmitt-enertec.com www.rschmitt-enertec.com Manufacturer of gas driven engines,generator sets and cogeneration systems in the range from 100 - 500 kW. RSE Engines for natural gas and biogas Model

fuel

Freq.

M06-G/B T0D41 g 50 M06-G/B TID41 g 50 M06-G/B T2D41 g 50 M08-G/B TID41 g 50 M08-G/B T2D41 g 50 M12-G/B TID41 g 50 M12-G/B T2D41 g 50 M06-G/B T0D41 g 60 M06-G/B TID41 g 60 M06-G/B T2D41 g 60 M08-G/B TID41 g 60 M08-G/B T2D41 g 60 M12-G/B TID41 g 60 M12-G/B T2D41 g 60 RSE engines for LPG M06-PT0D41 g 50 M06-PTID41 g 50 M06-PT2D41 g 50 M08-PTID41 g 50 M08-PT2D41 g 50 M12-PTID41 g 50 M12-PT2D41 g 50 M06-PT0D41 g 60 M06-PTID41 g 60 M06-PT2D41 g 60 M08-PTID41 g 60 M08-PT2D41 g 60 M12-PTID41 g 60 M12-PT2D41 g 60 RSE engines for Woodgas M06-HT2D41 g 50 M08-HT2D41 g 50 M12-HT2D41 g 50 M06-HT2D41 g 60 M08-HT2D41 g 60 M12-HT2D41 g 60

Electric output 140 kW 200 kW 250 kW 260 kW 333 kW 400 kW 500 kW 150 kW 210 kW 250 kW 280 kW 333 kW 420 kW 500 kW 115 kW 173 kW 205 kW 233 kW 260 kW 350 kW 450 kW 130 kW 173 kW 205 kW 233 kW 260 kW 350kW 450 kW 122 kW 166 kW 250 kW 140 kW 180 kW 275 kW

in dieselor 1000 kWE prime in gas.

Volvo Penta

405 08 Gothenburg, Sweden Tel +46 31 235460

SCANIA ENGINES

SE-151 87 Sodertalje Sweden Tel +468553 81000 Fax +468553 898 12 E-mail engines@scania.com Web www.scania.com UK Contact – Mark Swindell Scania GB Ltd Tel +44 1908 329386 E-mail mark.swindell@scania.com Diesel & Gas engines for power generation Prime power 250kVA to 700kVA Stand by power 250kVA to 770kVA Engine range prime power 50hz & 60hz at (70% mean load factor) Scania produce diesel and gas powered engines for various Industrial and Marine applications, tionally low fuel consumption.

All models are available to meet current emissions requirements, Scania engines are now available to meet both Tier 4F and EU Stage V. Alternative fuels Many of our engines can also operate on Bio-diesel conforming to EN14214 and HVO conforming to EN159540

Model Spec RPM kWm kVA TAD530GE Diesel 15002) 75 85 100 TAD531GE Diesel 15002) 88 2) TAD532GE Diesel 1500 113 130 1) 2) TAD550GE Diesel 1500 76 86 1) 2) 1500 89 101 TAD551GE Diesel 2) TAD730GE Diesel 1500 113 130 2) TAD731GE Diesel 1500 132 152 TAD732GE Diesel 15002) 162 186 2) TAD733GE Diesel 1500 175 201 2) 213 245 TAD734GE Diesel 1500 1) 2) TAD750GE Diesel 1500 114 131 TAD751GE1) Diesel 15002) 13 152 TAD752GE1) Diesel 15002) 158 182 TAD753GE1) Diesel 15002) 173 199 15002) 217 250 TAD754GE1) Diesel TAD940GE Diesel 15002) 241 277 TAD941GE Diesel 15002) 280 326 TAD1341GE Diesel 15002) 271 315 TAD1342GE Diesel 15002) 303 352 TAD1343GE Diesel 15002) 325 378 TAD1344GE Diesel 15002) 354 412 TAD1345GE Diesel 15002) 388 451 1) TAD1351GE Diesel 15002) 279 324 1) TAD1352GE Diesel 15002) 314 365 15002) 328 381 TAD1354GE1) Diesel TAD1355GE1) Diesel 15002) 355 413 TAD1640GE Diesel 15002) 392 461 TAD1641GE Diesel 15002) 430 505 TAD1642GE Diesel 15002) 503 591 TWD1643GE Diesel 15002) 536 630 TAD1650GE1) Diesel 15002) 393 462 TAD1651GE1) Diesel 15002) 430 505 Engines are also available for1800rpm/60Hz

LOADBANKS for GENERATORS

THE TRUSTED NAME FOR LOAD TESTING

LOADBANK PACKAGES ■ ■ ■ ■

20kW to 7000kW Resistive Only Loadbanks Resistive / Reactive Loadbanks DC Loadbanks

SALES | SERVICE | RENTAL

Call today: +44(0) 1283 531 645

www.crestchicloadbanks.com

TRUSTED KNOWLEDGE. TAILORED SOLUTIONS. If you have concerns about fuel quality, speak to an experienced IPU fuel expert about our industry-leading fuel and environmental managed services. compliance through OFTEC surveys to subsequent remedial recommendations, installation of polishing systems and scheduled maintenance routines. And, as a leading OEM in fuel systems, we are in a unique position to design and manufacture the solution most tailored to your needs.

With decades of experience in the global Oil and Gas sector, operating in some of the world’s most demanding ATEX environments, we fully understand the hazards and challenges you may face – which is why you can rely on our pro-active and undiluted support at all times.

Crucial Expertise for Critical Applications.

OFTEC INSPECTIONS

REMEDIAL WORK

FUEL FILTRATION AND CONDITIONING

More details at www.ipu.co.uk IPU Group, Cygnus Way, West Bromwich, West Midlands, B70 0XB. Telephone +44 (0)121 511 0400

MEMBER