Independent Power Asia March-April 2020

MARCH-APRIL 2020 PROMOTING

ISSUE 80

ON-SITE POWER & CO-GENERATION

www.wipmagazines.com www.gmp.uk.com

TCG

2032

www.mwm.net

POWERWEEK AFRICA

14 _ 18 SEPTEMBER 2020 JOHANNESBURG, SOUTH AFRICA

31%

49%

65%

20+

72%

Countries African Attendees Represented

Median C-Level Buy Side Executives Management Audience

www.power-week.com/africa

POWERWEEK ASIA

9 _ 13 N OVEMBER 2020 S

51%

32%

I

N

86%

G

C-Level Buy Side Median Executives Management Audience

A

P

74%

O

R

E

30+

Countries Asian Attendees Represented

www.power-week.com/asia v

Book 3 persons and 4th attends FREE *T&C Apply

EDITOR’S NOTES

MARCH-APRIL 2020

MARCH-APRIL 2020 PROMOTING

ISSUE 80 ON-SITE POWER & CO-GENERATION

www.gmp.uk.com

TCG

2032

DESPITE COVID-19 PANDEMIC PROSPECTS FOR ASIA’S POWER GENERATION SECTOR LOOK GOOD

www.mwm.net

CES20001_Anzeigen_MWM_TCG 2032 V12_210x297mm_3r3l3u_EN_2_0_RZ_sm.indd 1

07.04.20 11:47

ISSUE 80 Publishing & Events Director Richard Teasdale rteasdale@gmp.uk.com Publisher/Sales DIrector Neb Saric nsaric@gmp.uk.com Managing Editor Aidan Turnbull powereditorial@gmp.uk.com Marketing & Sales Executive Oscar Pancic oscar@gmp.uk.com Accounts Division Alison Williams accounts@gmp.uk.com Accounts Assistant Denise Lanzara denise@gmp.uk.com Far East Sales Bob Liu Shanghai, China bob.liu@ronco.com.cn US Sales & Subscriptions Jelena Milojevic power@gmp.uk.com Austrian & German Agent Mario Dobresko power@gmp.uk.com Global Media Publishing Ltd, The Courtyard, 30 Worthing Road, Horsham, West Sussex, RH12 1SL, UK Tel: +44 (0) 1403 220750 www.gmp.uk.com © Independent Power Asia (ISSN 1468 7100) www.gmp.uk.com

More than half of the planet lives in Asia. Six of the 10 largest nations in the world are in the Asia Pacific, and the region is playing an increasingly important role in the global economy, international security, and the world’s collective efforts to advance human development. It’s also true that Southeast Asia’s growth in electricity demand is among the fastest in the world In the region renewable energy only meets around 15% of demand. Overall higher temperatures are leading to an increased use of air-conditioning and peak demand for cooling systems could ENERGY DEMAND IN strain power systems The energy market in Southeast CHINA IS EXPECTED TO Asia has been growing rapidly.

Overall demand has increased by BEGIN NEXT MONTH BUT 80% since 2000, with millions of A FULL RETURN WILL new customers gaining access to electricity.

HAPPEN IN SEPTEMBER.” This is putting pressure on energy systems, and with much of the demand met by a doubling of fossil fuel use, CO2 emissions have also risen. At the same time the number of deaths linked to outdoor and household air pollution in Southeast Asia is expected to jump to more than 650,000 a year by 2040, up from around 450,000 in 2018, according to the International Energy Association (IEA).

“Southeast Asia is set to have a major impact over the next two decades, adding the equivalent of Japan’s entire energy system to global demand.

This rapid growth underscores the importance of Southeast Asian countries’ energy policies for their citizens, but also for the world,” says IEA Executive Director Fatih Birol.

Hopefully, once the nations of the world emerge from Coronavirus Lockdown the future will look brighter? Global carbon emissions from the fossil fuel industry could fall by a record 2.5bn tonnes this year, a reduction of 5%, as the coronavirus pandemic triggers the biggest drop in demand for fossil fuels on record.

Energy demand in China, the world’s biggest importer of oil, is expected to begin recovering next month, four months after the outbreak in the Wuhan province. However it will not make a full return to normal levels until September at the earliest, suggest analysts.

“

AIDAN TURNBULL Managing Editor

INDEPENDENT POWER ASIA

3

CONTENTS

MARCH-APRIL 2020

18 LYON GROUP TO PROVIDE STORAGE BATTERY BESS SYSTEMS FOR ASIA

12

14

05-10 LEADER AND NEWS FROM ASIA Comments and Regional News

12-13 MWM GAS GENSET DELIVERS WIN-WIN AT CCHP IN SHANGHAI, CHINA Nipro Shangha iis now relying on heat and power from a MWM TCG 2020 V16k natural gas generator set with an 1500kWel output.

14

CLARKE ENERGY INSTALLS JENBACHER GENSET India’s Embio Limited is using a Jenbacher 420 genset running in parallel to grid. Using biogas as a fuel it generates 1.5MWe electricity with low pressure steam from the engine exhaust flue gases.

16 STAMFORD® S7L1D-J42 ALTERNATORS FOR CHINA Q-Power required four alternators, each providing power at 1200kW, with an ambient temperature ranging from -15°C to 50°C. Four STAMFORD® S7L1D-J42 alternators were ordered by Q-Power (ChangZhou) Co., Ltd for a key oil & gas project located in western China. Additional requirements which were considered for this application included the harsh operation environment, non-linear & non-regular loads low 0.7-0.8 power factor, plus a Prime Power requirement to cope with 6,000-8,000 operating hours per annum.

The Lyon Group has signed an agreement with China’s second largest company, China Huadian Corporation, to co-develop and invest in power generation with integrated battery energy storage systems (BESS) in China, Australia and other Asian markets.

The agreement brings together an alliance to co-develop stable renewable energy including Japan’s JERA Co. Inc, with whom Lyon and China Huadian each signed separate agreements in 2018. Lyon’s agreements with China Huadian and JERA position Lyon at the heart of a major battery storage system project.

20

NEW ENGINES FROM VOLVO PENTA Volvo Penta is launching a new addition to its genset product portfolio, the D8 Stage II and Stage IIIA/Tier 3 engine. The 8-litre power generation engine offers industry-leading power density and a compact size, combined with low fuel consumption and noise levels. Volvo Penta’s new D8 Stage II and IIIA/Tier 3 engine further strengthens the company’s robust range of genset engines.

20 Like and follow us on Facebook @globalmediapublishing Follow us on Twitter @GMP_WIP Follow our activity on LinkedIn Global Media Publishing Ltd Visit Independent Power Asia on the web: www.gmp.uk.com Subscribe online at: www.gmp.uk.com/subscribe/ Subcription to 27 power publications: 1 Year - £120 UK, £180 ROW | 2 Years - £192 UK, £280 ROW. Payment in full or credit/debit card information is required to process your order.

Subscription request must include subscriber name and email.

For new subscriptions or renewal, call +44 (0) 1403 220750. Single copy price: £23.50 (including postage and packaging).

In addition to your subscription you will also recieve a FREE GIFT worth £100 (Worldwide Gen-Set & Cogeneration Directory), plus our Year Planner which includes all relevant global power industry events.

For customer service and address changes, call +44 (0) 1403 220750 or email power@gmp.uk.com Content Licensing: For all content licensing, permissions, reprints / e-prints, please contact powereditorial@gmp.uk.com Copyright: © 2019 Global Media Publishing Ltd. All rights reserved.

4

INDEPENDENT POWER ASIA

www.gmp.uk.com

NEWS

MARCH-APRIL 2020

IN BRIEF VPOWER GROUP TO CO-DEVELOP 900MW POWER PROJECTS IN MYANMAR CONSTRUCTION RESUMES ON 800KVA TRANSMISSION LINE PREVIOUSLY HALTED BY VIRUS LOCKDOWN State Grid Corporation of China (SGCC) has resumed construction work on the 800kV, 800MW ultra-high voltage (UHV) direct current (DC) power transmission project located between Yulin, Shaanxi province and Wuhan, Hubei province.

The building project had been completely suspended in the Hubei province, scene of China’s emerging coronavirus pandemic. The new line is expected to begin operations in 2021.

The US$2.6 nbillion project will include nearly 3,000 km of UHVDC power lines, with a total transmission capacity of 14GW. This will allow SGCC to deliver 40 TWh/year of electricity from Shaanxi, a city whose coal reserves are estimated at 270 Gt (12% of the national reserves) to Hubei, where electricity demand is rising rapidly.

SGCC has also signed contracts with ABB to supply advanced HVDC converter transformers and equipment for three 800 kV UHVDC transmission lines. Each line has the capacity to transport up to 8,000MW of electricity: the 1,700-km-long Yazhong-Nanchang project between the Sichuan province and the Jiangxi province, which is part of China’s West-East Electricity Transmission initiative; the 1,100-km-long Shaanbei-Wuhan line; and the 1,500 km-long Qinghai-Henan project.

The distributed power generation (DPG) station operator VPower Group International Holdings has set up a joint venture (JV) company with China National Technical Import & Export Corporation (CNTIC). The companies will each hold a 50% stake in the JV for the development of three power projects in Myanmar with an aggregate contract capacity of 900MW. CNTIC has been working with VPower since 2010 as its engineering, procurement and construction (EPC) contractor.

DIESEL GENSET POWERS WUHAN HOSPITAL Pramac has supplied a standby diesel GSW705V generator to Wuhan, China, to provide standby power for a Coronavirus hospital.

The hospital had been under construction when it was retasked to provide care for Corona virus patients. It was then equipped with beds and respirators for intensive care treatment.

The hospital covers an area of around 10,500 square metres. It features 135 wards which can provide 387 sickbeds.

Pramac’s genset was able to provide backup standby powerfor a host of specialist equipment, including monitors, ventilators, air conditioning, heating & lighting.

Pramac GSW705V generator has a reputation for toplevel efficiency and reliability, reports the company.

The 2019–20 outbreak remains an ongoing pandemic of coronavirus disease (COVID-19) caused by severe acute respiratory syndrome-

www.gmp.uk.com

coronavirus 2 (SARS‑CoV‑2).

The outbreak was identified in Wuhan, China, in December 2019, As of 22 April 2020, more than 2.56 million cases of COVID-19 have been reported in 185 countries and territories, resulting in more than 177,000 deaths.

The situation in China has eased and the country has so far recorded 4,632 deaths.

ACCURATE EMISSIONS TESTING FOR DIESEL ENGINES

Emissions gas testing is essential for diesel engines. You are unable to permit your genset without accurate emissions data.

Gas testing is the first step in designing your bespoke emissions abatement system.

•

Fast response

•

Comprehensive report

•

Results accepted by Environment Agency

NO.1 IN

EMISSIONS SOLUTIONS IPU.CO.UK/TESTING

INDEPENDENT POWER ASIA

5

NEWS

MARCH-APRIL 2020

IN BRIEF SOLAR & BIOWASTE ARE KEY FOR THAILAND Thailand’s share of non-hydro renewables could grow to 22% in 2029 from 12.6% in 2019.

Thailand’s renewables sector is expected to take a huge leap forward, with non-hydro renewables capacity projected to expand to 22% of the total power generation mix (15.5GW) by 2029 from the estimated 12.6% in 2019, according to calculations by Fitch Solutions.

The upsurge of renewables comes at the heels of coal-fired power growth’s stagnation due to popular opposition, which will provide ample opportunities for renewables as the Thailand government seeks to deliver increased power sector investment to meet electricity demand in the country. The solar and biowaste sectors are projected to significantly boost the installation of renewables.

RENEWABLE ENERGY FOR SUPPLY OF 122MW BIFACIAL MODULES China’s leading solar technology company LONGi announced that it had recently signed a contract with Atlas Renewable Energy to supply 122MW of Hi-MO4 bifacial modules for one of its projects in Chile.

LONGi has pioneered bifacial module technology in PV, promoting applications in solar plants on barren grass, sand, cement, snow and flat roofs. Depending on surface reflectivity, bifacial modules can deliver power generation gain of 7-25% over equivalent monofacial panels.

Patrick Valentin, Head of Strategic Sourcing at Atlas Renewable Energy, said: “We are pleased to select LONGi as one of our project partners. Implementing LONGi’s state-of-the-art technology in bifacials reflects Atlas Renewable Energy’s strong commitment to technology.”

NEW 2.2GW GAS POWER PLANT DEVELOPMENT APPROVED BY VIETNAM DIESELCHECK PORTABLE DIESEL ANALYSER

Critical power needs reliable fuel.

Now more than ever, it’s essential to check the condition of your stored fuel. The DieselCheck provides almost instant and reliable results.

6

•

Accurate

•

Fast

•

Simple

•

Rugged

•

Portable

INDEPENDENT POWER ASIA

NO.1 IN

FUEL CONDITIONING IPU.CO.UK/FUELTEST

The Government of Vietnam has granted approval to global power company AES for the development of a new 2.2GW combined cycle gas turbine (CCGT) power plant.

The new Son My 2 plant will be developed in the southcentral province of Binh Thuan, Vietnam.

AES president and CEO Andrés Gluski said: “AES is committed to the country’s economic growth and energy transition through the development of gas and renewable infrastructure.

“We appreciate that the Vietnam Government has selected us to advance this critical project for the country.”

Financial close for the plant is expected to be achieved in 2021. The facility is slated to commence commercial operations in 2024.

“Once operational, the electricity generated by the power plant will be purchased by the Government of Vietnam under a 20-year contract.

The new CCGT plant is expected to complement the

company’s investment plans in the gas infrastructure in Vietnam, including its previously announced 450TBtu Son My LNG terminal that was approved by the government in August.

Both the plant and gas terminal infrastructure are expected to play a crucial role in shaping Vietnam’s energy future by expanding the energy mix with imported LNG while meeting the increasing demand of the country’s sustainable and affordable electricity.

Approval for the CCGT plant and the LNG terminal will enable AES to move forward for obtaining necessary permits and associated project.

www.gmp.uk.com

Your Success is our Mission Linz Electric is an Italian company specialized in the production of synchronous alternators up to 1500kVA. Linz Electric’s Mission is to create the most efficient solution to lead customers to success through Made in Italy quality products, flexibility in process and quick and complete service.

Linz Electric’s Alternators: Energy for your Success.

www.linzelectric.com

NEWS

MARCH-APRIL 2020

IN BRIEF

ELECTRICITÉ DU CAMBODGE’S 2.4GW CROSS-BORDER DEALS WITH LAOS

TOKYO-BASED SUMITOMO BUYS LARGE STAKE IN ENERGY STORAGE CO. HIGHVIEW POWER Long-duration grid storage company Highview Power has raised a major equity investment to support its journey to market. The global industrial conglomerate Sumitomo Heavy Industries has invested $46 million in Highview, becoming the largest minority shareholder in the company.

The money will support Highview’s quest to commercialise large-scale energy storage plants, a crucial component for a power system with large amounts of renewable generation.

“For Sumitomo Heavy Industries, this is not a venture capital investment - this is a strategic bet,” Highview President and CEO Javier Cavada told Greentech Media. “This is a huge corporation that sees this [technology] as a cornerstone of its future.”

Highview currently operates two pilot plants which showcase its cryogenic thermal storage design, which uses well-known equipment from other industries to minimize technology risk.

With several years of field-testing under its belt, the company began developing full-scale plants in the UK and US last year. In the long term, Highview aims to supply its technology to other power plant developers, but for early projects, the company chose to develop in-house.

Cambodia’s main electricity supplier Electricité du Cambodge (EDC) has agreed two cross-border deals with two Lao developers to secure 2,400MW of power for 30 years. The deals will allow the units of the Lao IPPs Xekong Thermal Power Plant Company Limited and TSBP Sekong Power and Mineral Company Limited to come online between 2024 to 2027.

MAJOR INSTALLATION OF 4000 SERIES IN SRI LANKA BY PERKINS RELIABLE POWER NEEDS

DEPENDABLE FUEL

With more of us working from home, critical backup power is essential to support the National Grid. Stored fuel needs to be clean to be reliable.

IPU’s fast response & expertise spans all aspects of fuel conditioning: •

8

Fuel testing

•

Fuel cleaning service

•

Polishing systems

•

OFTEC inspections

INDEPENDENT POWER ASIA

NO.1 IN

FUEL CONDITIONING IPU.CO.UK/PRESERVE

Perkins engines are at the heart of 50 generator sets supplied to the Ceylon Electricity Board (CEB) by Sterling and Wilson.

The generator sets with their 4000 Series engines have been installed to provide prime power to Sri Lanka’s national grid.

The CEB is the largest electricity company in Sri Lanka, with activities covering all parts of the electricity supply chain.

It recently bolstered its network with the installation of 50 Perkin powered generator sets.

The Sterling & Wilsonsupplied generator sets currently supply up to 50 MW of prime power.

They are installed at three sites, two with 20 generator sets each and the third with 10.

Huw Jones, service and support manager of Perkins distributor Mayphil, said: “The site represents one of the largest installations of 4000 Series engines I have seen in recent years.”

The generator sets, he said, run parallel to the mainly hydro

and coal-powered grid and provide CEB with flexibility in maintaining a constant supply of electricity to its customers.

Normal fluctuations in demand determine how many are running, and for how long, he added.

Performance and reliability are key features of Perkins® 4000 Series engines. The engine supplied to CEB is a Perkins® 4012-46TAG0A. Mayphil, as the distributor for Sri Lanka – one of 10 territories where it represents Perkins – provides warranty support and preventive maintenance for CEB. It has already trained technicians specifically for 4000 Series engines and is planning further train-thetrainer courses at its newly opened facility in Colombo which houses modern, wellequipped workshops and offices.

“We think of ourselves as an extension of Perkins,” said Huw. “We’ve been a Perkins distributor since 2011 but we’ve worked with Perkins for more than 40 years in some form or other”

www.gmp.uk.com

MWM gensets.

Efficient, low-maintenance and highly available.

MWM’s product portfolio is comprised of gas engines and gensets in the output range from 400 to 10,300 kWel. That allows to set up power plants with an output of 100,000 kWel and more. The units are designed for maximum electrical and thermal efficiency, low operating and service costs, and high reliability and availability.

Thus, they reach efficiency levels of more than 90 percent. www.mwm.net

NEWS

MARCH-APRIL 2020

IN BRIEF MALAYSIA LOOKS AT MINI-HYDRO OPTIONS The concept of mini-hydro is rising to have the next best potential after solar in Malaysia, according to RAM Ratings.

“Given the country’s hilly topography and ample rainfall, mini-hydro plants have the next best potential to help Malaysia achieve its renewable energy target,” says a recent report.

Mini-hydro plants generate 71MW of Malaysia’s renewable energy capacity, and are placed next to solar (282MW) and biomass (783MW).

Sixteen weeks ago the Sustainable Energy Development Authority (SEDA) awarded 15 bidders with a total installed capacity of 176.79MW, at an average bid tariff of 6.1 cents (25.89 sen) per kWh, under its e-bidding programme for mini-hydro projects.

The move has apparently been welcomed by new investors.

TURBINE PRODUCTION IN CHINA COULD RETURN TO NORMAL, SAYS SURVEY BY NATIONAL AND GLOBAL WIND SECTOR GROUPS In a recent In a joint statement, the Global Wind Energy Council (GWEC) and the Chinese Wind Energy Association (CWEA) have confirmed that they believe supply chain disruptions and installation delays caused by quarantines and travel restrictions will be “moderate and focused in certain geographic regions”.

Answers about how much capacity might be affected were not proposed, but the industry groups believes he slowdown will “not be as significant” as Wood Mackenzie’s prediction that installations could be halved if the epidemic continues into the middle of 2020.

GWEC expects China to remain the world’s largest wind power market in 2020 having previously forecast 28GW of onshore capacity and about 4GW offshore to be added this year. GWEC and CWEA argued the impact of COVID-19 on wind power installations in 2020 will depend on how soon it can be contained — which the World Health Organisation suggested is “impossible” to predict. China’s onshore wind feed-in tariff is set to expire on 31st December 2020 - with projects approved beyond this date unable to claim support. The country’s five largest utilities have reportedly requested an extension to the deadline, the industry bodies said.

ELECTRICITY FROM OCEAN CURRENTS: TURBINE SYSTEM TRIALS UNDERWAY FUTURE-PROOF DIESEL ENGINES

FROM EMISSIONS LEGISLATION

Legislation such as the MCPD is cracking down on emissions from diesel gensets.

IPU’s AtmoShield emissions range leads the way in NOx and Particulate Matter reduction with:

10

•

Selective Catalytic Reduction

•

Diesel Particulate Filters

•

Diesel Oxidation Catalysts

•

Emissions Gas Testing

•

GTL Fuel

INDEPENDENT POWER ASIA

NO.1 IN

EMISSIONS SOLUTIONS IPU.CO.UK/EMISSIONS

In Japan, IHI technology is seen as more efficient than wind or solar power - the Japanese engineering company IHI is conducting an extended pilot test on a turbine system which catches ocean currents and turn them into electricity.

This is the first large-scale attempt to harness such ocean energy.

In a consortium with other outside organizations, IHI commenced R&D into this “ocean current generation” concept nine years ago.

It has been officially commissioned by New Energy and Industrial Technology Development Organization (NEDO).

The strong “Kuroshio” (“Black current”) ocean current runs close to Japan’s coastline, and the related technology is considered to be applicable in regions favourable for power transmission, namely the sea area around Yakushima, Kagoshima Prefecture: off Kochi Prefecture: off Kii Peninsula and the Ogasawara Islands, The company has developed

a single twin-turbine 2 MW generator set, with a turbine diameter of about 40m, and a 1,000kW subsea floating system. The initial target is to undertake a demonstration test with a scale model in the actual sea area within three years.

IHI’s Ocean thermal energy conversion: power generation works by exploiting the temperature difference (about 20°C or more) between the surface temperature (about 25°C) and bottom temperature (about 5°C) at a depth of 600 to 1,000 m.

Stable power generation is ensured year-round in low latitudes, such as to assume part of the base load.

“This is the critical advantage of this technology, which other renewable energies cannot provide,” says the company.

Low-boiling medium (ammonium, etc.) is vaporised using the temperature of the warm surface and driving the turbine for generation. Vapour discharged from the turbine is condensed in the low temperatures of the seabed.

www.gmp.uk.com

POWERING YOUR WORLD

DIESEL & GAS GENERATORS, ACOUSTIC & BESPOKE MODULAR HOUSINGS BRITISH ENGINEERING AT ITS BEST

1

DIESEL GENERATORS

Perkins

Perkins

Perkins

Perkins

00’s more Generato rs at adeltd.com

Perkins

Perkins

275 kVA Standby

463 kVA Standby

1266 kVA Standby

1399 kVA Standby

1519 kVA Standby

1620 kVA Standby

£22,800

£35,224

£137,924

£155,088

£173,676

£179,717

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

275 kVA Standby

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

330 kVA Standby

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

900 kVA Standby

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

1110 kVA Standby

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

1400 kVA Standby

UK Built Perkins Engine Fuel Tank Included!

Auto Start, 3 Phase

Cummins

1675 kVA Standby

Water Heater & Battery Charger Circuit Breaker, Base Fuel Tank, Auto Start, 3 Phase

Water Heater & Battery Charger Circuit Breaker, Base Fuel Tank, Auto Start, 3 Phase

Water Heater & Battery Charger

Water Heater & Battery Charger

Water Heater & Battery Charger

Water Heater & Battery Charger

Auto Start, 3 Phase

Auto Start, 3 Phase

Auto Start, 3 Phase

Auto Start, 3 Phase

£23,350

£24,001

£65,000

£97,810

£117,499

£123,500

*All prices exclude VAT, Ex-Works

adeltd.com/ipa | +44 (0) 1977 657 996

GENERATORS

MARCH-APRIL 2020

GAS GENSET DELIVERS WIN-WIN AT CCHP IN SHANGHAI, CHINA Nipro Shanghai is now relying on heat and power from a distributed energy power plant which provides stable and secure energy to the producer of medical equipment. The plant is operated by a local energy service provider that had invested a total of 8 million yuan. It covers an area of 500 m2 and is located in the Jiading district of Shanghai, the Chinese business metropolis.

A

s For installation, the project adopted a modular construction design: the equipment is integrated in containers, pipelines and other systems which are all factory processed and directly assembled on site.

Thus, significantly reducing the whole construction period to only three months, which is way lower than the traditional construction of distributed energy power stations.

In the process of production, the customer needs to use a large amount of energy, namely electricity, steam and hot water.

However, in the past the fired boiler, that had been used, was old and half damaged and thus the needs of thermal energy production were not satisfied. What is more, its emissions also exceeded the standard levels.

After collecting and analyzing energy consumption data of the customer, Shanghai Aerospace Energy Co., Ltd. (SAE), one of the official MWM distributors for China, provided a suitable combined cooling, heat & power (CCHP) solution for the customer.

It consists of a MWM TCG 2020 V16k natural gas generator set with an 1500kWel output, one flue gas waste heat boiler with a 1.3t/h (steam pressure of 0.8MPa) steam output and a water tank with a 84t water storage capacity.

The power plant provides part of the power, all the hot water and steam energy to the production plant, solving energy shortage, reducing customer energy cost and comprehensively solving customer’s energy demand to steam, electricity and hot water. The capacity of the distributed energy station can fully cover the energy demand of the customer, so that the distributed energy station can operate stable in a long-term.

It not only solves the

requirements of customer’s energy cascade utilisation, but also follows the energy conservation and emission reduction development purpose of the customer, so as to achieve the goal of win-win for the customer.

The MWM gas engines of the TCG 2020 series, produced in Mannheim/Germany, are perfectly geared to the challenges of a dynamic market environment. The models in the output range of 1,000 – 2,000 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low lifecycle costs and high profitability.

“

THE TCG 2020K WAS ESPECIALLY ADAPTED TO NON-ISO CONDITIONS SUCH AS HIGH ALTITUDES OR HIGH INTAKE AIR TEMPERATURES IN THE FIELD OF NATURAL GAS. MEANWHILE, MORE THAN 2000 POWER GENERATORS WITH APPROXIMATELY 2,800,000 KWEL HAVE ALREADY BEEN INSTALLED AROUND THE GLOBE.

12

INDEPENDENT POWER ASIA

www.gmp.uk.com

MARCH-APRIL 2020

GENERATORS

The TCG 2020K was especially adapted to non-ISO conditions such as high altitudes or high intake air temperatures in the field of natural gas. Meanwhile more than 2000 power generators with approximately 2,800,000 kWel have already been installed around the globe.

The MWM gas engines of the TCG 2020 series are said to be perfectly geared to the challenges of a dynamic market environment.

Gas engine TCG 2020 / TCG 2020 K1, V12, V12 (1.0), V16, V20 – for the highest ratings in ecology and economy The engines offer: - An output range from 1,000 to 2,000 kWel - Best electrical and thermal efficiency in its output class - Runs on all gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, etc.

- Low operating costs The TCG 2020 is mainly used for CHP plants in Europe and for biogas worldwide. Ax an engine the TCG 2020 V12 (1.0) is specifically optimised for the 1 MWel capacity range, with even lower operating and maintenance costs TCG 2020K was especially adapted to non-ISO conditions such as high altitudes or high intake air temperatures in the field of natural gas, reports the company.

Other points about the engine include: •Improvements of the intake duct and spark plug provide higher efficiency compared to predecessor model •Miller valve control times increase genset efficiency •It is suitable for all natural gas and biogas applications in countries with 50 Hz networks.

•Longer maintenance intervals for all natural gas applications extend useful life by two years •Optimised electrical efficiency of 43 percent (under ISO conditions) for natural gas applications •Optimised lubricant management •Lower internal consumption through higher mixture cooler temperatures for natural gas applications TCG 2020 – High Profitability Thanks to High Efficiency • Improvements of the intake duct and spark plug provide higher efficiency compared to predecessor model • Miller valve control times increase genset efficiency Higher Efficiency and Lower Pollutant Emissions • Smaller dead spaces in combustion chamber ensure more complete combustion • Reduced fuel consumption and CO and HC emissions • This enables gas savings of up to 15 percent a year and increases the profitability of the plant Higher Efficiency and Long Maintenance Intervals • Effective crankcase ventilation increases efficiency by utilizing the returned combustible blow-by gas • Optimised blow-by return and improved separation of the gas phase and liquid phase enable longer maintenance intervals for the turbocharger thanks to the clean intake air.

MWM is one of the world’s leading brands in the market segment of highly efficient, eco-friendly cogeneration plants for decentralized energy generation with combined heat and power (CHP). Operating under the name Caterpillar Energy Solutions, the Mannheim/Germany-based company founded 1871 by Carl Benz looks back on its MWM brand with almost 150 years of experience in the development and optimisation of gas engines and power generators for natural gas, biogas and other special gases. www.mwm.net

www.gmp.uk.com

INDEPENDENT POWER ASIA

13

TRIGENERATION

MARCH-APRIL 2020

BIOGAS-FUELLED TRIGENERATION PLANT INSTALLED AT PHARMACEUTICAL FACILITY

E

mbio Limited of Mahad, India, is a leading manufacturer of bulk drugs using molasses as a main raw material.

Fermentation is the core process used to convert molasses into drugs intermediate.

This process generates significant amount of waste, which undergoes anaerobic digestion process, converting high strength wastewater into biogas.

The digester, based on fixed film process, provides higher treatment efficiency.

Initially, the generated biogas of approx. 15,000 m3/day was being used to generate steam of approx. 85-90 tonnes per day, being used in process.

In 2016, Embio Limited, Mahad, decided to evaluate use of biogas for trigeneration (combined cooling, heat & power) applications using reciprocating gas engine technology.

Clarke Energy, the authorised distributor and service provider for INNIO’s Jenbacher and Waukesha gas engines in India, having significant experience,

14

INDEPENDENT POWER ASIA

“

THE INSTALLATION HAS ENABLED US TO REDUCE OUR DEPENDENCE ON THE GRID AND OUR USE OF HIGH-POLLUTING FOSSIL FUELS. GAS GENERATED THROUGH BIO-DIGESTION IS RENEWABLE AND EMBIO LIMITED IN ITS OWN SMALL WAY IS HELPING INDIA REDUCE GREENHOUSE EMISSIONS.” expertise and project management skills, secured the contract to design, supply, install, erect and commission 1.5MWe biogas-based power plant.

Operating since October 2017, the Jenbacher genset running in parallel to grid has significantly improved the conversion ratio.

This facilitates the optimum utilisation of biogas generating 1.5MWe electricity with 869kg/hr of low pressure steam from the engine exhaust flue gases via a waste heat recovery boiler.

Also chilled water is produced equivalent to 180 tonnes of refrigeration, using a hot water-fired Li-Br vapour

P absorption machine. Both, steam and chilled water are being utilised in the process.

The low fuel and oil consumption, enhanced control systems, and higher efficiency advantages offered were cited by Embio Limited as the key reasons for choosing to install a Jenbacher 420 engine, along with Clarke Energy’s after-sales-service capabilities.

Jenbacher 420 engines offer superior efficiency with an innovative engine concept, reports the company, Type 4 engines save on fuel without sacrificing flexibility or reliability.

The Type 4 is available in 50 and 60 Hz and features fuel and solution flexibility - making it an excellent choice for more than 10 different applications.

Offering reliability, dependability and high degree of availability more than 2,000 Type 4 engines have been delivered globally..

Clarke Energy’s offices in India provide 24×7 operation & maintenance services and Embio Limited signed a multi-year agreement for spare parts. The agreement enables them to boost productivity and maximise uptime, lowering their cost of ownership and preserving the value of Jenbacher gas engines.

“The installation has enabled us to reduce our dependence on the grid and our use of high-polluting fossil fuels. Gas generated through bio-digestion is renewable and Embio Limited in its own small way is helping India reduce greenhouse emissions, ” reports Mr. R.K Prabhu – Executive Director & CFO – Embio Limited.

Clarke Energy is an award-winning multi-national specialist in the engineering, installation and maintenance of engine-based power plants.

The company’s offerings includes both gas and diesel-fuelled technology. Clarke Energy was acquired by the Kohler Company in February 2017. Clarke Energy can either supply an individual generator, or deliver an EPC turn-key multiengine power plant backed up by long-term service support.

Clarke Energy is a specialist in high efficiency utilisation of fuels and is an innovator in the field of combined heat and power (CHP) or cogeneration technology. www.clarke-energy.com

www.gmp.uk.com

Noise control experts Keeping your world clean, quiet, and safe. Dürr Universal is a global leader in the design and manufacture of inlet and exhaust systems for gas turbines and reciprocating engines in the OEM and retrofit markets. www.durr-universal.com

Dürr Limited United Kingdom

Your Partner for Industrial Service Solutions The UK’s leading authorised service and parts centre Repairs and rewinds to all makes of large alternators and rotating equipment up to 40 tons Field Generator health checks and in-situ bearing upgrades Repair and supply of low and high voltage motors & drives Baumuller OEM product workshop & field support

24 HOUR SUPPORTLINE  +44 (0)161 432 7824  mail@baumuller.co.uk  www.baumueller-services.co.uk

Phone +44 1455 8944 88 Email solutions@universalaet.com

ALTERNATORS

MARCH-APRIL 2020

PRIME POWER FOR CHINA’S OIL & GAS INDUSTRY

Q

-Power based in ChangZhou, China has been serving the oil and gas industry since 1996 and STAMFORD® I AvK® has been providing the company with genuine alternators for decades.

Q-Power required four alternators, each providing power at 1200kW, with an ambient temperature ranging from -15°C to 50°C. This power would be used to help provide an energy supply for the manufacturing and industry development for the region and contribute to a level of energy safety.

Four STAMFORD® S7L1D-J42 alternators were ordered by Q-Power (ChangZhou) Co., Ltd for a key oil & gas project in western China.

Additional requirements to be considered for this application included the harsh operation environment, non-linear/non-regular loads low 0.7-0.8 power factor, plus the power requirement was Prime Power continuous for 6,000-8,000 operating hours per annum.

“Q-POWER REQUIRED FOUR ALTERNATORS, EACH PROVIDING POWER AT 1200KW, WITH AN

STAMFORD® I AvK® was able to fulfill these requirements with a dedicated product sizing process, exceptional upfit options and corresponding manufacturing process, such as strict insulation process.

Furthermore, the excellent product design allowed a user-friendly genset onsite assembly with its spacious interface.

With the genset alignment needing to be very precise, the double bearing feature on the STAMFORD® S7 was offered, which also enabled good serviceability and ensured that dust is decreased in the environment.

These were all requirements stipulated by the customer.

A company spokesman commented: “Q-Power chose STAMFORD® I AvK® not only because of the specification of the STAMFORD® S7 and the aesthetic appearance/design of the product, but also because the company had

trust in the manufacturing process of STAMFORD® products. Q-Power felt that the overall process of STAMFORD® I AvK® business interaction was very proactive and professional from pre-sales, through application consultancy, delivery and beyond in aftersales and service.”

Established in 1904, Cummins Generator Technologies manufactures alternators under the renowned NEWAGE®, STAMFORD® and AvK® brands setting the industry standard, with a range extending from 7.5 to 11,200kVA, suitable for all generator set configurations.

Although its products are used in a wide variety of applications, the common factor is that Cummins Generator Technologies work to a single standard for all their products and services no matter where the alternator requirement is in the world. www.stamford-avk.com

AMBIENT TEMPERATURE RANGING FROM -15°C TO 50°C.”

16

INDEPENDENT POWER ASIA

www.gmp.uk.com

easYgen easYgenTMTMSeries Series Genset GensetControl Controland and Optimization OptimizationSolutions Solutions

TM TM Saves cost cost over over plC-handled logical operations by the theofintegrated logicsManager Saves plC-handled logical operations byuse theofuse the integrated logicsManager Reduces efforteffort for variants in different applications.

One device fits many applications Reduces for variants in different applications.

One device fits many applications Increases availability and efficiency of parallel generators by high precision synchronization Increases availability and efficiency of parallel generators by high precision synchronization Ensures highhigh robustness against external disturbances by galvanic isolation Ensures robustness against external disturbances by galvanic isolation Enables youryour genset to speak your your local local language Enables genset to speak language

BENEFITS ANdANd BENEFITS ApplICATIONS ApplICATIONS

If youIf are for a for versatile, affordable, dependable genset control solution to simplify your your design and provide youlooking are looking a versatile, affordable, dependable genset control solution to simplify design and provide smoother commissioning, look look no further than than the Woodward easYgen series.series. smoother commissioning, no further the Woodward easYgen

YOUR BENEFITS YOUR BENEFITS TM TM SavesSaves cost cost over over plC-handled logical operations by the theofintegrated logicsManager plC-handled logical operations byuse theofuse the integrated logicsManager Reduces efforteffort for variants in different applications.

One device fits many applications Reduces for variants in different applications.

One device fits many applications Increases availability and efficiency of parallel generators by high precision synchronization Increases availability and efficiency of parallel generators by high precision synchronization Ensures highhigh robustness against external disturbances by galvanic isolation Ensures robustness against external disturbances by galvanic isolation Enables your genset to speak your local language Enables your genset to speak your local language

GENSET CONTROL AND PROTECTION – ANYWHERE

wer Generation ower Generation

If youIfare for a for versatile, affordable, dependable genset control solution to simplify your your design and provide youlooking are looking a versatile, affordable, dependable genset control solution to simplify design and provide smoother commissioning, look no than than the Woodward easYgen series.series. smoother commissioning, lookfurther no further the Woodward easYgen

vating forfor a Better Future novating a Better Future

COGENERATION

Cogeneration Applications Cogeneration Applications

ONE PARTNER FOR ALL POWER MANAGEMENT SOLUTIONS Emergency Standby Applications Emergency Standby Applications

Cogeneration Applications Cogeneration Applications

PEAK SHAVING

Peak Peak Shaving Applications Shaving Applications

Emergency Standby Applications Emergency Standby Applications EMERGENCY STANDBY

PeakPeak Shaving Applications Shaving Applications

Marine Applications Marine Applications MARINE

AUTHORIZED WOODWARD DEALER • • • • • •

Generator control and protection Breaker control and protection Remote access and remote monitoring Pre-assembled control panels Switchgear retrofits Testing, installation and commissioning

Marine Applications Marine Applications

Unit 1 | High Carr Business Park | Newcastle-under-Lyme Staffordshire ST5 7XE | United Kingdom Tel: +44 (0) 1782 569 190 | Email: info.uk@turner-ecs.com Sales & Service across UK, Benelux, Germany, Italy and the Middle East

w w w.t u r n e r- e c s . c o m

STORAGE BATTERIES

MARCH-APRIL 2020

BESS STORAGE FACILITIES FOR AUSTRALIA AS WELL AS CHINA & OTHER NATIONS IN ASIA

“

LYON’S AGREEMENTS WITH CHINA HUADIAN AND JERA POSITION LYON AT THE HEART OF OVERCOMING THE LIMITATIONS OF SOLAR AND WIND ENERGY SO THEY CAN BECOME PRIMARY POWER SOURCES.”

T

he Lyon Group has signed an agreement with China’s second largest power generation company, China Huadian Corporation, to co-develop and invest in power generation with integrated battery energy storage systems (BESS) in China, Australia and other Asian markets.

The agreement brings together an alliance to co-develop stable renewable energy including Japan’s JERA Co. Inc, with whom Lyon and China Huadian each signed separate agreements in 2018.

Lyon’s agreements with China Huadian and JERA position Lyon at the heart of overcoming the limitations of solar and wind energy so they can become primary power sources for the world.

The new agreement documents Lyon and China Huadian’s current focus is on: 1.specific BESS retrofit opportunities in China and two other Asian countries, based on detailed plantspecific assessments; and 2.China Huadian’s intention to co-develop, purchase, finance and construct Lyon’s advanced integrated solar battery power stations in Australia, as lead EPC contractor via subsidiary China Huadian Engineering Co. Ltd, one of the world’s leading renewable EPC companies.

The new agreement also covers: 3.integration of long-duration BESS into new and existing China Huadian projects in China and in other Asian

18

INDEPENDENT POWER ASIA

nations, to overcome the unstable power output of renewables, avoid curtailment, increase efficiency of exiting plant and ensure future renewable projects integrate BESS; and 4.development and acquisition of new and existing renewable power generation, as well as supplementation of existing thermal generation.

Lyon is assisting two of the world largest utilities to address impediments to the roll out of renewable generation. China Huadian and JERA’s generation portfolios are bigger than 150GW and 74GW respectively.

Lyon Chair David Green said the world’s biggest utilities are ‘awake to the imperative of making solar and wind energy work – for power systems, for investors and for national economies’.

He points out: “Major global utilities like China Huadian and JERA, and the others who have approached Lyon for assistance, are very focussed on addressing the very real limitations of traditional renewables.

“They understand that just continuing to invest in inflexible traditional solar and wind with uncontrolled, energy that is destabilising and often wasted is not commercially sustainable.’

As China ramps up its huge wind and solar construction plans, reduces subsidies, and moves toward a more competitive market, the value of avoided curtailment will be

measurable in billions of dollars.

“China Huadian has big plans for solar and wind development but the significant curtailment and grid disturbance they have experienced to date shows that the volume of renewables they want to build will deliver greater benefit, both technically and commercially, with integrated storage,” says David Green.

Lyon’s project design philosophy is that all new electricity generation must meet the power system requirements of a modern, stable electricity grid and be capable of providing commercial returns.

“Major global utilities like China Huadian are approaching Lyon to work with and invest alongside us because our project design philosophy leads to flexible, dispatchable power stations that supply valuable clean energy, enhance grid stability, and address connection/curtailment risks,” Green points out.

“Traditional standalone solar and wind projects deliver destabilising energy and waste too much of their output. They impose large expenditure on grid stabilisation, network augmentation and ’firming’.

They are less flexible than the thermal generation they are supplanting.”

He concludes: “Lyon’s integration of long-duration battery storage with power generation creates flexible, stable power stations that deliver predictable, dispatchable clean power. This reduces investment risk.”

Lyon integrates BESS and renewable generation addresses many of the key opportunities and risks created by substantial and rapid change across the world’s electricity markets in the following ways: •Low and even negative pricing during peak solar and wind production (in markets without competition, this translates as a pattern of new supply variously exceeding and falling short of demand); •Greater demand for ancillary services at the same time as lower supply of them, reflecting the nature of predominant generation substitution (wind and solar replacing coal); •Growing curtailment of new generation, due to factors including but not limited to thermal constraints and local voltage and frequency destabilisation, driven by construction of clusters of solar and wind in zones remote from matching grid capacity or load. www.lyonasia.com.au

www.gmp.uk.com

LOADBANKS for GENERATORS

THE TRUSTED NAME FOR LOAD TESTING

LOADBANK PACKAGES ■ ■ ■ ■

20kW to 7000kW Resistive Only Loadbanks Resistive / Reactive Loadbanks DC Loadbanks

SALES | SERVICE | RENTAL

Call today: +44(0) 1283 531 645

Crestchic Limited, Second Avenue, Centrum 100, Burton upon Trent, Staffordshire DE14 2WF, UK T: +44 (0)1283 531645 F: +44 (0)1283 510103 E: sales@crestchic.co.uk

www.crestchicloadbanks.com Sales & Rental Offices in : UK, North America, Singapore, Germany, Brazil, Netherlands, France, China and UAE

GENSET ENGINES

MARCH-APRIL 2020

GENSET RANGE EXPANDS WITH D8 STAGE II AND STAGE IIIA/TIER 3 ENGINE

“

THE 8-LITRE POWER GENERATION ENGINE OFFERS USERS IN ASIA INDUSTRY-LEADING POWER DENSITY AND A COMPACT SIZE, COMBINED WITH LOW FUEL CONSUMPTION AND NOISE LEVELS.”

V

olvo Penta has launched a new addition to its genset product portfolio, the D8 Stage II and Stage IIIA/Tier 3

engine.

The 8-litre power generation engine offers industry-leading power density and a compact size, combined with low fuel consumption and noise levels.

Volvo Penta’s new D8 Stage II and IIIA/Tier 3 engine further strengthens the company’s robust range of genset engines.

The D8 base engine has been used globally for a wide variety of applications across the Volvo Group.

Now, Volvo Penta engineers have perfected the design and optimized the D8 for the power generation segment.

“The proven D8 design is based on mature technology concepts that have

20

INDEPENDENT POWER ASIA

undergone hundreds of thousands of testing hours and real-world use,” says Kristian Vekas, product manager for genset engines at Volvo Penta.

“With the D8, our customers will benefit from 100% proven, reliable components. We have ensured our solution will function with the required performance and reliability levels in all the applications, climates and environments our customers operate in.”

Both the D8 Stage II and IIIA/Tier 3 engines feature state of the art, hightech injection and charging systems with low internal losses, contributing to excellent combustion and low fuel consumption.

They have been built on the dependable in-line six design and have been developed to produce smooth and vibration-free operation with low

noise levels.

“The new, modern D8 engine has been built with a high power to weight ratio, giving it industry-leading power density and an extremely compact design for its power class,” says Kristian. “It has been designed for quick, easy and economical installation as well as ease of operation and maintenance.”

D8 in focus The powerful and economical D8 will mainly be used as a reliable source of back-up power, as well as cost-effective primary power generation in areas where energy is scarce. It can be used for both mobile and stationary power generation applications, depending on local emission regulations.

The Stage II compliant D8 engine (TAD841843GE) is a dual speed premium engine. Switchable between 1,500 rpm (50 Hz) and 1,800 rpm (60 Hz), it delivers up to 275 kWm at prime power and is also available in three power nodes: 256, 301 and 326kVA at 1,500 rpm (50 Hz) at prime power.

Similarly, the EU Stage IIIA/Tier 3 Certificate compliant D8 (TAD851-853GE) genset engine is also a premium dual speed engine, switchable between 1,500 rpm (50 Hz) and 1,800 rpm (60 Hz), it delivers up to 274 kWm at prime power. www.volvopenta.com

www.gmp.uk.com

CLASSIFIED

DIRECTORY OF EQUIPMENT & SERVICES

EXHAUST TECHNOLOGY: Exhaust Gas Heat Exchangers Heat Recovery Steam Generators Catalytic converters and SCR (DeNox)-Systems Silencers

Authorised Service & Parts Centre All Makes of High Voltage Rewinds UK & International Field Support James Bexon

+44 (0)161 432 7824

APROVIS Energy Systems GmbH Tel.: +49 (0) 9826 / 6583 - 0

mail@baumuller.co.uk

www.aprovis.com

www.baumueller-services.co.uk

INDUSTRY LEADING CONTROL SYSTEMS

Colchester Engineering Systems Unit 5 Chancers Farm,Farm, Fossetts Lane, Fordham, Unit 5 Chancers Fossetts Lane, Colchester, Essex, CO6 3NY, England Fordham, Colchester, Essex, CO6 3NY, Tel: fax 01206 240788 telEngland 01206 240788 01206 240099 email: colengsys@aol.com email:alan@colengsys.com www.colchesterengineering.com www.colchesterengineering.com

SPECIALISTS IN – Load Share – Digital AVR’s – Auto Start – AMF – Hybrid – Mains Protection – Remote Comms

Specialists in Noise Control and Ventilation Systems for all types of applications

POWER WHEN YOU NEED IT

GF Genovate provide total power solutions for the UK & Ireland Energy markets.

Diesel & Gas Generating Units.

STOR/CM AND PEAKING CHP SCR SERVICE & WARRANTY 24/7/365

Tel: +44 (0) 1723 890099 sales@deepseaelectronics.com support@deepseaelectronics.com

www.genovatepowersolutions.com desk@genovatepowersolutions.com

SUPPORT & SOLUTIONS for all engine heating challenges

HOTSTART meets the engine heating needs for the diverse range of engines and customers of a global market. Let us be your engine heating partner.

www.hotstart.com

Exclusive suppliers of DEIF and Huegli Tech Control and Protection Equipment to the Power Generation Industry Tel: +44 (0)1942 932100 Email: sales@indps.co.uk Web: www.indps.co.uk

www.deepseaelectronics.com

IPU design and manufacture products and bespoke systems for critical diesel and gas engine applications:

Alternators Made in Italy

ENGINE STARTING FUEL CONDITIONING ENGINE CONTROLS EMISSIONS SOLUTIONS PROTECTION RELAYS COMPONENTS

Viale del Lavoro, 30 - 37040 Arcole (VR) Italy T. +39 045 7639201 - F.+39 045 7639202 info@linzelectric.com - www.linzelectric.com

W: WWW.IPU.CO.UK E: IPU@IPU.CO.UK T: +44 (0) 121 511 0400

classified unit 42x36mm.indd 1 20/04/2016 17:35:24

ENERGY WHERE NEEDED with INNOVATIVE SOLUTIONS COGENERATION

Diesel and Natural Gas Fueled Generators www.pramac.com

•

Service and product provider, specialising in the power generation industry. Sole UK & Ireland distributor for CRE Technology.

Expertise in land & marine applications including: G59/3 Relay Testing Single/Multi Running Systems Paralleling Systems to the Utility AVR Replacements

Engine Pre-heater Systems • Diesel Fuel Heaters • Hydraulic Oil Heaters • Storage Tank Heaters • Customer Specials etc WWW.preheat.co.uk Tel: 020 (8) 848 1912 Sales@preheat.co.uk

www.precisioncontrols.co.uk

Contact: Mr Alistair Hickey Tel: +44 (0) 161 818 8720 Email: sales@totalgeneratorsolutions.com www.totalgeneratorsolutions.com

THERMAL

CYCLE PLUS

GEN SET POWER PLANT

SHORT BREAK

STATIC GAS

STORAGE

SOLAR CYCLE

OIL & GAS

MARGEN s.p.a.

Via Dino Ferrari, 50 - 41053 Maranello (MO) - Italy +39 0536 94.36.15 info@margen.it www.margen.it

TO ADVERTISE IN THE CLASSIFIED SECTION PLEASE CONTACT THE POWER DIVISION SALES TEAM ON +44 (0)1403 220 750 E: power@gmp.uk.com

CLASSIFIED

ENGINE MANUFACTURERS GUIDE

R Schmitt Enertec GmbH

INNIO Jenbacher gas engines

Headquarters: A-6200 Jenbach (Austria) T +43 5244 600-0 F +43 5244 600-527 jenbacher.info@ge.com www.gejenbacher.com Manufacturer of gas driven generator sets and cogeneration systems in a power range from 0.25 to 3 MW. Model JMS 208 GS JMS 208 GS JMS 312 GS JMS 312 GS JMS 316 GS JMS 316 GS JMS 320 GS JMS 320 GS JMS 412 GS JMS 416 GS JMS 420 GS JMS 612 GS JMS 616 GS JMS 620 GS

Fuel

rpm

g g g g g g g g g g g g g g

1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,800 1,500 1,500 1,500 1,500 1,500 1,500

Pel

Pth

330 335 625 633 834 848 1,063 1,060 844 1,131 1,415 1,820 2,433 3,041

358 406 731 808 988 1,079 1,190 1,313 892 1,194 1,492 1,792 2,399 3,020

Ratings natural gas standard, NOx ≤ 500 mg/ m3N. Dry exhaust gas; based on 5% O2. For engines with 1,200 rpm please contact GE Energy’s Jenbacher product team.

AMPS SECTION ComAp T:+ 0420 246 012 111 E: info@comap-control.com ComAp are a leading manufacturer and supplier of generating set and drive controllers, providing innovative and easy-to-use solutions that are trusted by customers within the world’s toughest and most demanding applications. So whether you need a controller for a single generating set or a complete system for an embedded power station, it makes sense to choose ComAp.

TAD1242GE TAD1640GE TAD1641GE TAD1642GE

352 393 433 485

409 462 509 570

Perkins Engines Company Limited

Peterborough PE1 5FQ Contact name:- Simon Gray Tel: +44 (0) 1733 583000 Email: gray_simon_j@perkins.com Perkins is one of the world’s leading suppliers of off-highway diesel and gas engines, offering dependable cost-effective power up to 2500 kVA in dieselor 1000 kWE prime in gas.

T: +44 0 121 511 0440 E: uk@hotstart.com HOTSTART is a world leader in the design and manufacture of heating systems that improve engine and equipment reliability. For more than 75 years, our customers have come to depend on our preheaters to keep their engines ready to start.

T: +44 (0)1527 513800 E: info-uk@weg.net WEG Design and manufacture Synchronous alternators, offering Low, Medium and High voltage units with multiple poles and Power ratings from 10KVA to 50MVA. Our Alternators are being used globally in a wide range of applications from standard Industrial, to complex oil and gas to multi megawatt Hydro and gas turbine power plants.

fuel

Freq.

M06-G/B T0D41 g 50 M06-G/B TID41 g 50 M06-G/B T2D41 g 50 M08-G/B TID41 g 50 M08-G/B T2D41 g 50 M12-G/B TID41 g 50 M12-G/B T2D41 g 50 M06-G/B T0D41 g 60 M06-G/B TID41 g 60 M06-G/B T2D41 g 60 M08-G/B TID41 g 60 M08-G/B T2D41 g 60 M12-G/B TID41 g 60 M12-G/B T2D41 g 60 RSE engines for LPG M06-PT0D41 g 50 M06-PTID41 g 50 M06-PT2D41 g 50 M08-PTID41 g 50 M08-PT2D41 g 50 M12-PTID41 g 50 M12-PT2D41 g 50 M06-PT0D41 g 60 M06-PTID41 g 60 M06-PT2D41 g 60 M08-PTID41 g 60 M08-PT2D41 g 60 M12-PTID41 g 60 M12-PT2D41 g 60 RSE engines for Woodgas M06-HT2D41 g 50 M08-HT2D41 g 50 M12-HT2D41 g 50 M06-HT2D41 g 60 M08-HT2D41 g 60 M12-HT2D41 g 60

Electric output 140 kW 200 kW 250 kW 260 kW 333 kW 400 kW 500 kW 150 kW 210 kW 250 kW 280 kW 333 kW 420 kW 500 kW 115 kW 173 kW 205 kW 233 kW 260 kW 350 kW 450 kW 130 kW 173 kW 205 kW 233 kW 260 kW 350kW 450 kW 122 kW 166 kW 250 kW 140 kW 180 kW 275 kW

405 08 Gothenburg, Sweden Tel +46 31 235460 SE-151 87 Sodertalje Sweden Tel +468553 81000 Fax +468553 898 12 E-mail engines@scania.com Web www.scania.com UK Contact – Mark Swindell Scania GB Ltd Tel +44 1908 329386 E-mail mark.swindell@scania.com Diesel & Gas engines for power generation Prime power 250kVA to 700kVA Stand by power 250kVA to 770kVA Engine range prime power 50hz & 60hz at (70% mean load factor)

WEG UK Ltd

Model

Volvo Penta

SCANIA ENGINES HOTSTART

56743 Mendig, Germany T +49 2652 9351810 F +49 2652 9351822 info@rschmitt-enertec.com www.rschmitt-enertec.com Manufacturer of gas driven engines,generator sets and cogeneration systems in the range from 100 - 500 kW. RSE Engines for natural gas and biogas

Scania produce diesel and gas powered engines for various Industrial and Marine applications, superior quality and reliability, offering exceptionally low fuel consumption.

All models are available to meet current emissions requirements, Scania engines are now available to meet both Tier 4F and EU Stage V. Alternative fuels Many of our engines can also operate on Bio-diesel conforming to EN14214 and HVO conforming to EN159540

Model Spec RPM kWm kVA TAD530GE Diesel 15002) 75 85 TAD531GE Diesel 15002) 88 100 TAD532GE Diesel 15002) 113 130 1) TAD550GE Diesel 15002) 76 86 TAD551GE1) Diesel 15002) 89 101 2) TAD730GE Diesel 1500 113 130 2) TAD731GE Diesel 1500 132 152 TAD732GE Diesel 15002) 162 186 TAD733GE Diesel 15002) 175 201 TAD734GE Diesel 15002) 213 245 TAD750GE1) Diesel 15002) 114 131 TAD751GE1) Diesel 15002) 13 152 TAD752GE1) Diesel 15002) 158 182 1) 2) TAD753GE Diesel 1500 173 199 TAD754GE1) Diesel 15002) 217 250 TAD940GE Diesel 15002) 241 277 TAD941GE Diesel 15002) 280 326 TAD1341GE Diesel 15002) 271 315 TAD1342GE Diesel 15002) 303 352 TAD1343GE Diesel 15002) 325 378 TAD1344GE Diesel 15002) 354 412 TAD1345GE Diesel 15002) 388 451 1) TAD1351GE Diesel 15002) 279 324 1) TAD1352GE Diesel 15002) 314 365 1) TAD1354GE Diesel 15002) 328 381 1) TAD1355GE Diesel 15002) 355 413 TAD1640GE Diesel 15002) 392 461 TAD1641GE Diesel 15002) 430 505 TAD1642GE Diesel 15002) 503 591 TWD1643GE Diesel 15002) 536 630 TAD1650GE1) Diesel 15002) 393 462 TAD1651GE1) Diesel 15002) 430 505 Engines are also available for1800rpm/60Hz