Luby Equipment Specifications & Rental Rates

03/01/2013

19

2

About Luby Equipment Luby Equipment traces its beginnings to 1977 when Bob Luby seized the opportunity to become an owner of Machine Maintenance and Equipment Company. He had begun his career in heavy equipment sales and had experience in everything from cranes to excavators. Initially, the company focused on maintaining and repairing heavy industrial equipment and has grown to include three divisions that sell and service equipment—the “construction equipment division”, the “oilfield division” and the “power generation division”.

Construction Equipment The construction division has expanded through acquisitions and branch additions. The first acquisition was Bistate Machinery, the Fiat Allis dealer, in 1989. Three years later, Luby purchased Case Power & Equipment in St. Louis and Cape Girardeau, MO, and branch openings in Illinois followed in Quincy, Springfield, and Caseyville. Today, there are five locations in the construction equipment division.

Oilfields The beginnings of the oilfield division emerged when the company became a dealer for Ingersoll-Rand water well drills, down hole hammers and bits, and high-pressure compressors. Initially, we focused on servicing the water well industry, but with the explosive growth in the oil and gas industry, Luby naturally increased our involvement with oil and gas drilling activities. There are now three locations that supply equipment, parts and service, including renting compressor packages with operators, hammer and bit sales and rental, other equipment rental including wheel loaders, excavators, long reach fork lifts, man lifts, and other equipment in Arkansas, Oklahoma, and West Virginia.

Power Generation Division The power generation division was launched in 2005 when Luby Equipment Services was approached by a major manufacturer of power generator products to represent their products in our markets. This division's growth was aided by several ice storms and has become a major division and an integral part of our company. The common thread throughout our company is our emphasis on service and the need for 24/7 emergency response. Luby today sells and supports our Power Generation products throughout Missouri and Illinois with our six full service locations just like we do with other equipment lines. Luby is one of the largest providers of scheduled maintenance contracts in the two state area. We offer our maintenance services to all generator owners and cover all brands of generators.

Construction Equipment Case . . . . . . . . . . . . . . . . . . . . . . .3-5, 9 Attachments . . . . . . . . . . . . . . . . . . .6 Takeuchi/Astec/Toro . . . . . . . . . . . .7 Doosan/Other . . . . . . . . . . . . . . . . . .8 Wacker . . . . . . . . . . . . . . . . . . . . . . . .9 Dynapac . . . . . . . . . . . . . . . . . . . .10-12 Construction Attachments . . . . . . .8 Indeco FCC Premier Sweepster

Equipment is our product, Service is our business

Our Family Business Bob's sons, Tim and Steve, grew up in the family business, spending summers helping out in the parts department. Today, both still have their feet firmly planted in Luby Equipment. Tim and Steve are part of senior management in the sales department. Like most successful family businesses, Luby Equipment has a loyal group of employees who have been with the company for many years. They all strive to satisfy customers 100% of the time. The motto they all embrace is, "Equipment is our product. Service is our business."

Our Services Maintaining a policy of zero downtime, Luby Equipment provides same day parts delivery and on-site service, 24 hours a day, 7 days a week.

Technicians undergo extensive training and are certified for any equipment they service. They routinely troubleshoot a situation to identify problems and quickly offer solutions to enhance your equipment’s performance.

Our Customers Luby Equipment’s core customer base began with smaller, mom and pop companies. Many of these companies have grown, as Luby has, and customers now range in size from small start ups to very large companies, many of which are second and third generation family businesses. Customers represent a wide range of businesses, construction companies, plumbing contractors, environmental remediation companies, road builders, excavating contractors, utility contractors, landscapers, government agencies, quarries and aggregate processors, oil and gas companies, rental companies, farmers, recyclers and waste handlers, railroad and municipality crews, and all sorts of industries with warehouses and routine maintenances needs.

Our Equipment When the opportunity arose, Luby Equipment expanded our equipment lines in ways that help customers with their businesses. The brands of equipment we carry include: construction equipment from Case’s full line, Takeuchi compact track loaders and mini excavators, Doosan wheel loaders and excavators, Dynapac rollers and pavers, Astec trenching equipment and Pro-Tec & GME trench protection equipment, Oshkosh trucks with brooms or blowers, Terex forklifts and man lifts, stand-by generators, trailers, Atlas Copco oil field equipment, and a wide variety of ground engaging tools and attachments.

Trenching Equipment Astec/Toro . . . . . . . . . . . . . . . . . . . . .7 Pro-Tec/GME . . . . . . . . . . . . . . . .14-15 Trailers . . . . . . . . . . . . . . . . . . . . . . . . .13 Towmaster Eager Beaver Butler Belshe Road Maintence Equipment Dynapac . . . . . . . . . . . . . . . . . . . .10-11

Miscellaneous Equipment Leica Machine Control Systems . .16 Oshkosh Airport Snow Removal . .16 Generators—Standby On-Site . . . .16 Oilfield Equipment Complete Oilfield Air Packages . .17 Downhole Hammers & Bits . . . . . .17 Genie Man Lifts . . . . . . . . . . . . . . . .17 Terex Fork Lifts . . . . . . . . . . . . . . . .17 Terms & Conditions . . . . . . . . . . . . .18 Credit Application . . . . . . . . . . . . . . .19

3

Construction Equipment Excavators — Tracked CX250C

Model

Net HP

Max Op Weight

17468 CX75 54 HP CX80 54 HP 18585 CX135C 100 HP 32000 CX130B 95 HP 29500 CX160C 120 HP 37700 CX210C 157 HP 47400 CX210C N 157 HP 47200 CX210C LR *(50’) 157 HP 50660 CX225 153 HP 53223 CX250C 177 HP 55400 CX300C 207 HP 65900 CX350C 266 HP 80000 CX470B 362 HP 103800 CX700B 463 HP 153400 CX800 532 HP 178575 CX250 LR *(60’) 177HP 62100 Leica Laser Power Digger 2D System

Max Dig Depth 13’ 7” 15’ 1” 19’ 5” 19’ 10” 21’ 4” 21’ 10” 21’ 9” 39’ 5” 22’ 0” 22’ 8” 23’ 3” 24’ 1” 27’ 4” 32’ 4” 35’ 0” 47’ 9”

Day

Week

4 Weeks

$400 400 550 550 580 650 650 1000 700 725 880 1020 1350

$1200 1200 1670 1670 1750 1970 1970 4000 2100 2200 2650 3050 4000

$3600 3600 5000 5000 5200 5900 5900 11500 6200 6600 7900 9100 12000

Call for Rates 1350 N/A

4000 500

12000 1500

LR = Long Reach Available with hydraulic couplers or thumbs add 10%

Double Rate for Breaker—See Page 6 for Sizes

Articulated Trucks

Excavators — Compact CX50B

335B

Model

Net Horsepower

Operating Weight

Max Dig Depth

Day

Week

4 Weeks

Model

Net Horsepower

Heaped Capacity

Payload

Day

Week

4 Weeks

CX17B CX27B* CX31B* CX36B* CX55B*

15.15 HP 21.30 HP 28.40 HP 28.40 HP 39.30 HP

3638 5556 6679 7958 12295

5’ 5” 9’ 2” 10’ 2” 11’ 0” 12’ 10”

$200 200 200 250 290

$600 600 600 750 800

$1800 1800 1800 2200 2400

330B

334 HP

23.0 yd3

31.0 Ton

$1200

$3850

$11500

335B

380 HP

26.2 yd3

34.7 Ton

N/A

4170

12500

340B

426 HP

28.8 yd3

39.7 Ton

N/A

5000

15000

*Enclosed Cab Heat/AC add 10% Available with hydraulic couplers or thumbs add 10% Double Rate for Breaker

4

Construction Equipment Crawler Dozers

Wheel Loaders

1150K

1121F

Model

Net Max Operating Max Heaped Model HP Weight Bucket Cap *521F 118 HP 23069 2.60 yd3 *621E 146 HP 27406 3.00 yd3 *721F 179 HP 31510 3.25 yd3 821F 211 HP 43778 4.25 yd3 921F 242 HP 43778 4.75 yd3 1021F 296 HP 53500 5.50 yd3 1121F 320 HP 60800 6.25 yd3 1221F 365 HP 67020 7.60 yd3 *Fork Attachment

Net Horsepower

Blade Width

Operating Weight

650L LT 74 HP 84” WT 74 HP 84” LGP 74 HP 84” 750L LT 84 HP 104” WT 84 HP 104” LGP 84 HP 124” *850L XLT 96 HP 104” WT 96 HP 104” LGP 96 HP 124” *1150K LT 118 HP 111” WT 118 HP 111” LGP 118 HP 122” *1650L XLT 144 HP 126” WT 144 HP 126” LGP 144 HP 157” *1850K XLT 184 HP 134” WT 184 HP 134” LGP 199 HP 160” Leica Laser Power Grade 2D System Leica Laser Power Grade 3D w/GPS

16250 16800 17550 18900 19700 20200 19600 20200 20700 27858 28667 29365 35203 36691 37578 44269 46649 49450

*Available with Ripper

Day

Week

4 Weeks

$390

$1160

$3500

470

1400

4200

Day $400 450 625 N/A N/A N/A N/A N/A 50

Week $1200 1350 1850 2000 3200 3700 4500 4850 150

4 Weeks $3600 4000 5500 6000 9600 11000 13500 14500 450

550

1650

4950

Quick Couplers Avail. Add 10% Forks Available 10% Scale Available Add 20%

590

1770

5300

Wheel Loaders — Compact

750

2270

6800

950

2800

8500

N/A N/A

600 N/A

1800 6000

121E

Add 10% for LPG

Model

Rough Terrain Forklifts

Net Max Operating Max Heaped Horsepower Weight Bucket Cap

21E 50 HP 121E 60 HP 221E 69 HP 321E 77 HP Fork Attachment

588H

10459 11268 12268 12997

0.92 yd 1.05 yd3 1.18 yd3 1.31 yd3 3

Day

Week

4 Weeks

$250 277 300 350 50

$700 800 850 1100 150

$2100 2400 2500 3300 450

Week

4 Weeks

Quick Couplers Avail. Add 10%

Motor Graders 865B

Model Model

Type

Weight

Cap.

Reach

Day

586G 586H 588G 588H

Straight Straight Straight Straight

12200 13600 13500 15600

6000 6000 8000 8000

14’ 15’ 22’ 15’

$215 215 245 245

Week

4 Wks

$650 $1950 650 1950 735 2200 735 2200

Horsepower

Operating Weight

845B 160 HP 32199 865B 205 HP 34242 885B 219 HP 37942 Leica Laser Power Grade 2D System Leica Laser Power Grade 3D w/GPS *Available with Ripper

Day

Call for Rates N/A N/A

600 N/A

Add 10% for LPG

1800 6000

5

Construction Equipment Skid Steers

Loader Backhoes

SR200

590SN

Model

Net HP

SR130 SR150 SR175* SV185* SR200* SR220* SR250* SV250* SV300*

43 HP 49 HP 57 HP 57 HP 70 HP 76 HP 84 HP 76 HP 84 HP

Rtd Operating Load Weight 1300 1500 1750 1850 2000 2200 2500 2500 3000

5000 5000 6200 6900 7400 7700 6500 8000 8300

Pin Height

Day

134” 134” 122” 120” 123” 125” 125” 130” 130”

$185 195 200 205 215 240 250 250 325

$550 650 675 700 645 700 750 750 975

$1650 1800 1900 1950 1990 2100 2250 2250 2925

$30

$105

$270

*Enclosed Cab with Heat/Air

Week 4 Weeks

SV-Vertical Lift/SR-Radial Lift

Net HP

580N/M

79 HP

18’ 3”

14564

$290

$870

$2600

580 Super N/SM

92 HP

18’ 6”

16239

320

940

2800

w/HP1100 Breaker

640

2080

5600

w/IMC75 Tamper or Auger & Bit

480

1440

4320

580 Super N WT/SM

See Page 6 for Attachments

Day

Week

4 Weeks

92 HP

18’ 6”

19985

350

1040

3100

108 HP

20’ 0”

20458

380

1140

3400

w/HP1500 Breaker or Auger & Bit

760

2300

6900

w/Hyd Thumb

480

1440

4320

590 Super N

Machines equipped w/ Smooth or Tooth Bucket

Max Dig Oper Depth Weight

Model

Compact Track Loader

All Units Equipped with Cab Heater/Air, X-Hoe, 4-WD, Side Control, Aux Hyd. for Backhoe Bucket

TR270

Loader/Tool Carrier 570M XT

Model

Net HP

TR270* TR320* TV380*

70 HP 84 HP 84 HP

Rtd Operating Load Weight 2700 3200 3800

6200 9600 10200

Pin Height

Day

123” 127” 132”

$300 390 410

$ 880 1175 1230

$2700 3500 3700

$30

$105

$270

*Enclosed Cab with Heat/Air

Week 4 Weeks

TV-Vertical Lift/TR-Radial Lift Machines equipped w/ Smooth or Tooth Bucket Add 10% for Extra Bucket

Model 570M XT*

Net Horsepower

Max Lift Capacity

79 HP

6537

*Enclosed Cab with Heat/Air See Page 6 for Attachments

Max Operating Weight Day 10376

Week

4 Weeks

$315

$950

$2800

$30

$105

$270

6

Construction Equipment Attachments Demolition Attachments Model HP200 HP350 *HP500 *HP750 **HP1000 **HP1100 **HP1250 **HP1500 ***HP1800 ***HP2000 ****HP3000 ****HP4000 ****HP5000 ****HP5500 *****HP7500 *****HP8000 HP12001 HP13001 HP1600

Carr Wt Min

Carr Wt Max

Flow Supply

1550 3100 3750 6650 7750 8850 11050 14400 22100 26500 33000 35500 42000 46500 51000 60000 70000 75000 100000

6600 11000 14300 17600 23100 26450 30850 35200 44000 48500 55000 61500 70500 83500 92000 110000 125000 125000 260000

4-11 g/m 7-12 g/m 8-16 g/m 14-22 g/m 14-24 g/m 16-27 g/m 19-28 g/m 19-29 g/m 22-34 g/m 23-35 g/m 30-40 g/m 34-43 g/m 39-48 g/m 43-53 g/m 48-61 g/m 51-71 g/m 66-81 g/m 77-94 g/m 86-111 g/m

Day

Week

4 Weeks

$180 190 200 200 350 390 390 500 580 755 800 835 1025 1025

$540 550 600 600 1000 1170 1170 1500 1750 2265 2400 2500 3065 3065

$1620 1650 1800 1800 3100 3500 3500 4500 5200 6800 7100 7900 9200 9200

Call for Rates

Lowest Cost to Maintain

Over 20 Years of Field Proven Reliability

Sealed Accumulator

Top Shock Absorber

Lateral Side Shock Absorbers Auto-Variable Speed & Power Automatic Power Greasing System Fully-Enclosed Shock Housing Only Two Piston Seals FullyReplaceable Lower Bushings Quiet Breakers for Noise Sensitive Applications

HP5500 Popular Slimline Design

Field-Replaceable Lower Bushing Insert

*Skid Steer-Track Loader-Compact Exc **Backhoe-Midi Exc ***130-160 lbs Exc Class ****160-225 lbs Exc Class *****330-470 Lbs Exc Class

Additional Attachments Description Auger Drives w/Bit Auger Bits

4 Weeks

Week

Day

$900 450

$300 150

$100 50

Range — 6” to 36”

Description

Day

Week

4 Weeks

Buckets Cold Planer 24” with Super High Flow Unit Cold Planer 40” with Super High Flow Unit Trencher 6”- 8” Mower 72” Snow Pushers 8’ Snow Blades Forks Grapples 72” Rakes (Rock) Tillers Tree Spades Cyclone SW3500 Drop Hammer

$50 375 425 160 75 125 150 50 90 175 180 225 200

$150 1300 1600 480 225 375 450 150 265 530 540 675 600

$450 3300 3900 1440 675 1125 1350 450 800 1600 1620 2035 1800

Description Collector Broom Angle Broom 84”

4 Weeks

Week

Day

$2000 2000

$665 665

$225 225

7

Construction Equipment Mini Excavators TB228

Model

Net Horsepower

Operating Maximum Weight Dig Depth

TB108 9.60 HP TB016 13.5 HP TB228* 23.5 HP TB235 * 28.8 HP TB250* 38.0 HP TB285* 60.8 HP TB1140 Cab 23.5 HP Zero Tail Swing TB138FR* 28.8 HP TB153FR* 38.7 HP TB180FR Cab 60.8 HP

Day

Week

4 Weeks

2033 3524 6100 7650 10950 17230 31878

5’ 6” 7’10” 9’ 5” 11’ 2” 12’ 5” 15’ 2” 18’ 0”

$200 200 200 250 250 350 550

$600 600 600 750 750 1200 1700

$1800 1800 1800 2200 2200 3600 5100

8316 12450 18370

11’ 3” 12’ 10” 14’ 11”

250 290 350

750 800 1200

2200 2400 3600

$105

$270

*Enclosed Cab with Heat/Air

$30

Compact Track Loaders TL10

Model

Net Horsepower

TL220* TL230* TL240/TL10* TL250/TL12*

Operating Weight

Bucket BO Force

Day

6315 8275 10115 11630

4821 6728 7403 8692

$275 290 390 495

53.5 HP 70.0 HP 86.0 HP 98.0 HP

*Enclosed Cab with Heat/Air

TL240

$30

Week 4 Weeks $800 870 1175 1450

$2400 2600 3500 4200

$105

$270

All Vertical/Radial Lift Machines equipped w/ Smooth or Tooth Bucket

Trenching Equipment Directional Drill

Trencher

Minimax

Maxi-Sneaker

Model

Model

Gross HP

Max Thrust/ Operating Pullback Weight

DD65 Minimax

26 HP

DD1416

65 HP

14000

8500

DD2024

83 HP

20000

10500

6000

2600

Day

Week 4 Weeks Call for Rates

RT60 Walk Behind RT130 Walk Behind RT160 Walk Behind Maxi-Sneaker RT360 RT460 RT560 RT660 II RT960 RT1160

Gross HP 13 HP 13 HP 24 HP 37 HP 32 HP 37 HP 51 HP 75 HP 99 HP 115 HP

Max Dig Operating Depth Weight 36” 36” 48” 36” 60” 60” 72” 72” 84” 84”

720 903 1530 2346 3906 5660 7000 10304 12700 14439

Day

Week 4 Weeks

Call for Rates

8

Construction Equipment Doosan Wheel Loaders

Doosan Excavators

DL500

DX140LC

Model

Net HP

Op Wgt

Dig Dpt

Day

Week 4 Weeks

DX140LCR 95 HP 31923 DX180LC 118 HP 38934 DX225LC 148 HP 48722 DX225LCLR (50’) 148 HP 51147 DX255LC 166 HP 55556 DX300LC 197 HP 66580 DX350LC 271 HP 77603 DX420LC 292 HP 92369 DX480LC 329 HP 108644 DX520LC 329 HP 111774 Leica Laser Power Grade 2D System Leica Laser Power Grade 3D w/GPS

19’ 8” 20’ 1” 21’ 9” 38’ 3” 22’ 4” 24’ 0” 24’ 9” 25’ 4” 25’ 7” 22’ 3”

$ 550 580 700 1000 750 880 1010 1115 1350 1560 N/A N/A

$1660 $ 5000 1750 5200 2100 6200 3500 10000 2170 6500 2650 7900 3030 9100 3335 10000 4000 12000 4665 14000 500 1500 N/A 6000

Quick Couplers Available Add 10% Double Rate for Hammers—See Page 6 for Class

Model

Net Horsepower

106 HP *DL160 *DL200 143 HP *DL250 162 HP DL300 220 HP DL400 280 HP DL450 287 HP DL500 335 HP *Fork Attachment

Operating Weight

Bucket Capacity

19246 24912 30865 38493 50133 56165 66017

2.0 yd 2.6 yd3 3.3 yd3 4.2 yd3 5.1 yd3 6.3 yd3 6.8 yd3

Day $330 400 450 670 1070 1110 1350 100

3

Week 4 Weeks $1000 $3000 1200 3600 1340 4000 2000 6000 3200 9600 3350 10600 4000 12000 300 900

Quick Couplers Available Add 10% *Fork Attachment Unit Available Add 10% Scale Available Add 20%

Doosan Wheeled Excavator DX210W

CAT Crawler Loader 953C

Model

Net HP

Op Wgt

Dig Dpt

Day

DX140W 132 30314 DX190W 156 39242 DX210W 161 45856 Leica Laser Power Grade 2D System Leica Laser Power Grade 3D w/GPS

15’ 0” 19’ 7” 19’ 9”

$600 680 750 N/A N/A

Week 4 Weeks $1800 2000 2170 500 N/A

Swinger Attachment Available Add 10% Double Rate for Hammers—See Page 6 for Class

$5300 6000 6500 1500 6000

Model 953C/D 963C/D

Net Horsepower

Operating Weight

Bucket Capacity

Day

121 HP 158 HP

32360 43096

2.5 yd 3.0 yd3

$ 850 1000

3

Week 4 Weeks $2500 3000

All Units with Cab Equipped with Heat/AC

$7500 9000

9

Construction Equipment Compaction Equipment (Rollers & Compactors) SV212

DV207

Single Drum—Sheepfoot/Smooth Roller

Double Drum (Vibratory)

Rated Operating Horsepower Weight

Model SV208

99 HP

Centrifugal Force

SV210

99 HP

Centrifugal Force

SV212

148 HP

Centrifugal Force

SV216

198 HP

Centrifugal Force

15741 32600 19445 36000 25386 63000 31479 73000

Size

Day

66”

$500

Week 4 Weeks $1500 $4500

66”

500

1500

4500

84”

580

1735

5200

84”

580

1735

5200

Available with Dozer Blade — Add 10%

Pneumatic Roller

Rated Operating Model Horsepower Weight

Max Weight

Size

PT240

53000

78”

20525

Rated

Operating Horsepower

DV201

31 HP

Centrifugal Force

DV202 Centrifugal Force DV204 Centrifugal Force DV207 Centrifugal Force DV210 Centrifugal Force DV213 Centrifugal Force

31 HP 48 HP 80 HP 99 HP 130 HP

Weight

Size

Day

Week 4 Weeks

5510 6300 5950 7700 7720 8900 16226 14700 22928 24700 28928 30300

43”

$200

$600

$1800

47”

280

825

2500

51”

280

825

2500

57”

315

935

2800

66”

535

1600

4800

83”

580

1735

5200

Week 4 Weeks

Trench Roller

PT240

99 HP

Model

Day

Week 4 Weeks POR

Model

H.P.

Weight

Capacity.

Size

Day

RT82SC

16

3020

2400

32.0”

$225

Remote-Controlled

$675

$2200

10

11

Road Compaction Equipment Rollers

Plate Compactors

Duplex Rollers Single Drum Vibratory Rollers Dynapac's range of small and medium-size vibratory rollers are used to compact all types of soil with the exception of rockfill. The rollers are suitable for most types of road construction, airfields, dam construction, harbour projects and industrial constructions. Heavy-size vibratory rollers are used for a very wide range of applications. The thickness and grade of the drum's steel are adapted for compacting rockfill, although vibratory rollers are also known for their excellent performance on other types of fill. A special version with a padfoot drum (PD) is available for compacting cohesive soils.

CA134D

Model

Max Weight

Horsepower

Drum Width

CA134D

11000 - 59305

84 - 220 HP

54” - 84”

Model

Rated Power

Drum Width

LP6500 LP750

6.80 kW 8.90 kW

26” 30”

LP750

LP6500

Pavers Tracked Pavers

F1000T

The tracked pavers in the Dynapac range sets impressive standards, since these pavers are convincing at all kind of paving widths by their ease of adapting, simple use and servicability. Long track drives and wide pads guarantee maximum traction and low maintenance due to their sealed and lifetime lubrication. The rugged track types of these pavers compensate for uneven ground level and precise electronic steering ensures excellent laying results.

Double Drum Vibratory Rollers Dynapac's double drum asphalt roller range features everything from the most compact equipment for repair jobs to large machines for the biggest sites.

Vibration dampened platforms, swivel seats for better visibility, logically sorted controls and Roll Over Protective Structures (ROPS) all contribute to the maneuverability, operator ergonomics and safety.

Model

Max Weight

Horsepower

Drum Width

CC1000

3472 - 36994

23.5 - 215 HP

31” - 84”

CC1300

CC1000

Model

HP

Working Width

F1000T

230 HP

26’

The combi-versions are equipped with four rubber tyres at the rear instead of a drum. The rubber wheels are driven in pairs by separate propulsion motors, thus minimizing the risk of damaging newly laid asphalt compound when making sharp turns. The rubber wheels ensure a denser and smoother surface on the asphalt, a feature that is sometimes required.

Model

Max Weight

Horsepower

Drum Width

CC1300

5071 - 22046

31 - 110 HP

42” - 77”

Max Weight

Horsepower

Drum Width

CS142

28660

99 HP

83”

Frequency LG500

Forward Soil Plates 6 Models

116-229

12.6”-19.7”

75 Hz-95 Hz

Fwd Asphalt Plates 3 Models

210-256

16.5”-19.7”

95 Hz

Fwd and Rev Plates 7 Models 353-1801

17.7”-26.0”

53-80 Hz

Rammers LT500 Net Mass

Plate Width

Force

137 - 183

9.1 - 11.0”

10.0 - 21.4 kN

Our wheeled pavers are well known for their reliability over many years of operation with a wide range of applications. In combination with their flexibility these machines are the ideal choice for paving urban roads. In response to the needs of end users and the construction industry a wide range of optional equipment is available which further enhances their versatility.

Model CM-2500

F1000W

HP

Working Width

230 HP

26’

Compactasphalt®

Model CS142

CM2500 CM3000

Paving Width

Rated Output

24.6’ 43.5’

116 kW 163 kW

The Compactasphalt® method, which sets a completely new standard in roadbuilding is a combination of a compact asphalt paver with big 45 tons hopper insert and a module carrying the wearing course mix. It simultaneously lays both upper asphalt layers (wearing and binder course) in a single pass, with both layers being laid hot on hot. This results in better interlocking of the courses, a saving on the thickness of the wearing course, and a reduction of the paving time.The possible thin wearing course thickness enables the economical use of high-value mineral nutrients regarding to polishing-resistance, elucidation and edge strength.

Planers Compact Planers

PL350TD

Powerful, highly maneuverable, hydraulically powered planers designed for cutting widths of 350 to 1000 mm at a cutting depth range between 100 and 300 mm. All of these cold planers are offered with three or four wheel drive unit and with anti spin control system. Equipped with a quick release rear loading system the compact planers have been developed for road maintenance jobs and other milling applications in asphalt or concrete.

Model Compact 2 Models

Wkg W Cutting D 20”

6.3”-7.9”

HP 110-130 HP

MF300C

Pneumatic Rollers CP142

Max Plate W

F1000W

Steel Drum Rollers

Model

Max W

Wheeled Pavers

Combi Rollers

The CS142 is a modern, articulated static threedrum roller with the same static linear load and drum diameter on all drums. The roller covers the asphalt mat with its full width. The CS142 is used primarily to compact asphalt when the course has a typical thickness of up to 50 mm, depending on the stiffness of the asphalt compound and the prevailing weather conditions. The machine is suitable for medium-size and large-size applications. It is ideal for use in areas where the ground should not be vibrated, such as in areas close to old buildings and on bridges.

Model

Dynapac has a complete range of pneumatic tired rollers. All have standard features offering high performance, simplicity and versatility.

The CP142 has an exclusive Modular Ballast System comprising sealed ballast containers to allow exact visual control of wheel loads. The roller is used to compact asphalt for sealing purposes. It is also used to compact base, sub-base and stabilized soil. CP224 and CP274 are used mainly in conjunction with other asphalt rollers for surface sealing. Due to their heavy weight, they are also used for soil compaction.

Model

Max Weight

CP142

13228 - 2800

Horsepower Drum Width 99 - 110 HP

69” - 91”

The tracked MF300C is a transport and conveying system which is used as a non contact connecting element between road finishing machines and transport vehicles for carrying mixed goods. This completely equipped machine has mainly been developed for use in the Compactasphalt™ system and is also suitable to feed big pavers working at max. paving width.

The automatically controlled conveyor can be lifted to a height of up to 16’ and the standard hopper size of 26’ 3 can be enlarged to 45t by use of a hopper insert. For an optimized view to the paver and the truck the operator’s station can be lifted by appr. 3’ and the seats on both sides can be moved outwards.

MF300C

Screeds

Many years of practical experience in the construction industry together with continuing development provide the basis for the advanced technology and high stability of Dynapac screeds. The end result is an impressively high paving performance, including the achievement of excellent compaction values. The rugged construction of the Dynapac screeds ensures a high degree of stability essential for paving widths of up to 52’ with a fixed screed and up to 29’ with the telescopic one.

PL20000LS

High Capacity Planers Dynapac drew on its experience from the early days of modern cold planer construction to meet the latest requirements for the new Dynapac large planers. These machines are capable of removing asphalt and concrete across a profiling width of 2010/2100 mm at a maximum cutting depth of 320 mm. Hydrostatically driven by four steered track drives, practical standard equipment and a range of options combined to make your planer one of the most capable in the latest generation of cold planers.

Model

Wkg W Cut D

HP

High Cap 3 Models

79”-83” 12.6” 600 HP

12

Construction Equipment Single Drum Rollers

Tandem Drum Rollers

CA150D

CC384HF

Smooth Drum (Vibratory) Make

Drum Size

Roller Weight

Day

CA134D Centrifugal Force

54”

CA150D Centrifugal Force CA152D Centrifugal Force CA250D Centrifugal Force CA600D Centrifugal Force

66”

9150 12900 15990 25620 16200 25620 23815 55190 41015 71210

66” 84” 84”

Week 4 Weeks

Asphalt Roller (Vibratory)

$300

$900

$2700

Make

500

1500

4500

500

1500

4500

555

1665

5000

600

1800

5400

Available with Dozer Blade — Add 10%

Single Drum Compactors CC262PD

CC900G Centrifugal Force CC11000 Centrifugal Force CC1200 Centrifugal Force CC1300 Centrifugal Force *CC2232 Centrifugal Force *CC384HF Centrifugal Force CC524HF Centrifugal Force CC624HF Centrifugal Force CC722 Centrifugal Force

Drum Size

Roller Weight

35”

3485

Day

Week 4 Weeks

$200

$600

$1800

225

665

2000

280

835

2500

315

935

2800

390

1165

3500

535

1600

4800

535

1600

4800

580

1735

5200

580

1735

5200

Week 4 Weeks

7650 39”

3715 7650

47”

5735 16340

51”

8600

57”

18520

16540 40120 66”

23150

77”

26570

62100 62100 84”

28110 62100

84”

36990 69750

*Offset Models Available

Trench Compactor Padded Foot with Strike Off Blade (Vibratory) Make CA134PD Centrifugal Force CA150PD Centrifugal Force CA262PD Centrifugal Force CA362PD Centrifugal Force

Drum Size

Roller Weight

54”

10650 13860 16980 32070 26680 67850 30915 67850

66” 84” 84”

LP8504

Day

Week 4 Weeks

$380

$1135

$3400

500

1500

4500

580

1735

5200

580

1735

5200

Available with Dozer Blade — Add 10%

Model

HP

Weight

Capacity

Size

Day

LP8504

16.8 HP

3,020

2,400

33”

$225

$675

$2200

13

Trailers Trailers Lowboys

Tagalongs

35 GSL

B9DOW

Easy Loaders

20 XPT

B9DOW

20 XPT

• Small yet durable trailers • Perfect for transporting skid steer loaders, small roller or small backhoes • Capacities 12,000 - 40,000 lb • 9 - 20 ton air or electric brakes • 10” - 12” load angles

• Ramps facilitate loading and unloading equipment • Capacities 20,000 - 50,000 lb • 10 - 25 ton air or electric brakes • 8” loading angle

35 GSL

25 XPT

50 GSL

50 GSL BR

55 GSL

• The gooseneck trailers are convenient for loading and unloading • 25 - 50 ton fixed or detachable goosenecks • Capacities 70000 - 120000 lb • Dual or tri-axle air ride suspension

Drop Deck Trailers — 1 - 9 Ton Drop Deck Trailers

Deck Over Trailers

1 - 9 Ton

5 - 25 Ton

Titanium Trailers 35 - 60 Ton

Trailers

Trailers WB12-2EP

Single Axle Single Wheel Single Axle Cable Support / Single Axle Dual Wheel / Tandem Axle Single Wheel Model

GVWR

Cap

Width

Deck w/Tilt

TS-610-D

5500

4000

66”

120”

Drop Legs / Goose Necks / Ramped Model

GVWR

Cap

Width

Deck w/Ramps

WB12-2EP

16000

12000

102”

14’

14

Trenching Equipment Trenching & Shoring Products Steel Boxes & Shoring Model

Weight

Day

Week

4 Wks

C-60 Soil 29’ Pipe Clear 48” Foam C-60 Soil 24’ Pipe Clear 48” Foam

$198 184

$396 368

$1188 1105

5519 4060 7003 4770 8475

C-60 Soil 32’ Pipe Clear 64” Foam C-60 Soil 24’ Stacking Box, Foam C-60 Soil 25’ Pipe Clear 64” Foam C-60 Soil 20’ Stacking Box, Foam C-60 Soil 18’ Pipe Clear 64” Foam

$189 140 230 168 283

$379 279 460 336 567

$1136 838 1380 1008 1700

5344 9550 6873 12182 48

C-60 Soil 24’ Stacking Box, Foam C-60 Soil 26’ Pipe Clear 64” Foam C-60 Soil 16’ Stacking Box, Foam C-60 Soil 19’ Pipe Clr Frt 64” Foam Stack Pins for Trench Boxes (4) 4 Point Lifting Sling - 5/8 in. x 16’

$187 305 264 350 5 3

$373 611 527 719 11

$1120 1832 1581 2157 32

$33 37 41 44 48 55 63 79 93 128

$65 73 81 88 96 111 126 158 187 255

$130 146 162 176 193 221 252 315 373 510

4L Series 4L812 4L814

4714 5213

4M Series 4M812 4M416 4M816 4M420 4M820 6M Series 6M420 6M820 6M424 6M824 STK-PINS Sling

8” Spreader Pipe 8DS24 8DS30 8DS36 8DS42 8DS48 8DS60 8DS72 8DS96 8DS120 8DS180 Square Manhole Boxes SMH48 MH8 MH10 Round Manhole Boxes RMH-8.5 X 8 Bedding Boxes BH-7 BH-9

Description

387 474 561 647 734 908 1081 1428 1776 2784

24” Spreader Pipe (Set of 4) 30” Spreader Pipe (Set of 4) 36” Spreader Pipe (Set of 4) 42” Spreader Pipe (Set of 4) 48” Spreader Pipe (Set of 4) 60” Spreader Pipe (Set of 4) 72” Spreader Pipe (Set of 4) 96” Spreader Pipe (Set of 4) 120” Spreader Pipe (Set of 4) 180” Spreader Pipe (Set of 4)

2348 4104 4787

4’ x 8’ Manhole Stacker 8’ x 8’ x 8’ Manhole Box 8’ x 10’ x 10’ Manhole Box

$100 181 193

$199 363 385

$598 1088 1156

2319

8.5’ x 8’ Round Manhole/cutouts

$287

$574

$1723

5350 6383

7 Cu. Yd. 60”W x 16’L x 44”H 9 Cu. Yd. 72”W x 16’L x 44”H

$178 196

$356 392

$1067 1177

Day

Week

4 Wks

$121 125 139

$241 251 278

$723 753 835

$27 29 31 34 2 4

$53 58 62 68 5 8

$160 173 185 203 15 23

$219 272 2

$438 544 5

$1313 1631 15

$9 10 12 16 24

$17 21 23 31 49

$52 52 70 93 147

$35 44 58

$70 88 115

$210 264 345

Aluminum Boxes & Shoring Model

Weight

Description

2AEX Boxes 2AEX-68 906 6’ x 8’ Box with Knife Edge & Lifting Eyes 2AEX-86 943 8’ x 6’ Box with Knife Edge & Lifting Eyes 2AEX-88 1177 8’ x 8’ Box with Knife Edge & Lifting Eyes Accessories For 2AEX Boxes 2AEX-2640 216 (4) 2AEX Endload Struts 3.5” X 7.5” 2AEX-3859 312 (4) 2AEX Endload Struts 3.5” X 7.5” 2AEX-4468 368 (4) 2AEX Endload Struts 3.5” X 7.5” 2AEX-5692 456 (4) 2AEX Endload Struts 3.5” X 7.5” 2AEX-SP 40 Stacking Pins (set of 4) 6' ALM-SLG 6’ Nylon 4 Point sling 4AEX Boxes 4AEX-810 2195 8’ x10’ x 4” Wall Aluminum Box 4AEX-814 2937 8’ x14’ x 4” Wall Aluminum Box 4AEX-SP 20 Stacking Pins (set of 4) 5 in. Spreader Pipe for 4AEX Boxes 5DS17 170 17” Spreader Pipe (Set of 4) 5DS27 185 27” Spreader Pipe (Set of 4) 5DS36 269 36” Spreader Pipe (Set of 4) 5DS60 436 60” Spreader Pipe (Set of 4) 5DS96 685 96” Spreader Pipe (Set of 4) 5" Adjustable Spreader Pipe For 4AEX Boxes 4AEX-2437 774 24” - 37” Spreader Pipe (Set of 4) 4AEX-3661 1122 36” - 61” Spreader Pipe (Set of 4) 4AEX-5497 1756 54” - 97” Spreader Pipe (Set of 4) Hydraulic Trench Shields HS-8x8-5692 1457 Hydraulic Shield w/ 8’ x 8’ sidewalls ES-6-3859 356 Vertical End Shore ES-8-3859 368 Vertical End Shore HSEP-8-4468 240 8’ End Panel Assembly HSEP-8-5692 307 8’ End Panel Assembly HS-3859 380 (4) - Hydraulic Struts for HS Box PL 1000 56 Pump-Plastic Hand w/ 12’ Hose SF-G-3A 120 Winter Grade Shore Fluid 6-1 gal. bottles

$228 83 90 32 40 54 20

$456 $1369 165 495 180 540 64 192 81 242 107 321 39 118 $353.00/Case (6) 1 gal. Containers

15

Trenching Equipment Trenching & Shoring Products Aluminum Boxes & Shoring Model

Weight

Hydraulic Vertical Shores HVS-1.5-2236 22 HVS-1.5-3455 27 HVS-1.5-5288 35 HVS-3.5-2236 49 HVS-3.5-3455 59 HVS-3.5-5288 76 HVS-5-5288 86 HVS-7-2236 69 HVS-7-3455 79 HVS-7-5288 96 FIN-FORM 90 Hydraulic Vertical Shore Extensions 2EXT-5288-24 14 2EXT-5288-42 19 2EXT-5288-56 21 Lite Shield (Build-A-Box) 24LSP-6 24LSP-8 114 24LSP-10 24LSS-1 12 24LSS-2 16 PC-2 8 SMHC 76

Description

Day

Week

4 Wks

Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Vertical Shore Finform Sheeting 8’ x 4’ x 3/4” Plywood

$12 14 17 17 20 24 24 20 23 26 10

$24 28 34 35 40 48 48 40 45 53 10

$48 55 68 105 119 145 145 121 136 136 29

24” Extension for 5288 cylinders 42” Extension for 5288 cylinders 56” Extension for 5288 cylinders

$11 13 16

$11 13 16

$22 26 31

24” x 96” x 2” Panel

$26

$52

$105

7 7 6 15

11 11 6 15

22 22 12 29

24” - 32” Adjustable Strut 32” - 48” Adjustable Strut 16” Connector (connects 2 panels) Steel Manhole Connectors (4)

Misc Trenching & Shoring Products Model Weight Description Hi-Clearance Arch Arch 8’ ID 4270 Hi-Clearance Arch Arch 10’ ID 4540 Hi-Clearance Arch Arch 11’ ID 4700 Hi-Clearance Arch Arch 12’ ID 5360 Hi-Clearance Arch Arch 13’ ID 5660 Hi-Clearance Arch Arch 14’ ID 5770 Hi-Clearance Arch Arch 15’ ID 5880 Hi-Clearance Arch Arch 16’ ID 6090 Hi-Clearance Arch Arch 17’ ID 6200 Hi-Clearance Arch Arch 18’ ID 6910 Hi-Clearance Arch Arch 19’ ID 7160 Hi-Clearance Arch Arch 20’ ID 7320 Hi-Clearance Arch Street Plates SP-48 1310 4.0’W x 8’L x 1”H SP-510 2050 5.0’W x 10’L x 1”H SP-810 3920 8.0’W x 10’L x 1”H SP-816 5220 8.0’W x 16’L x 1”H SP-820 6530 8.0’W x 20’L x 1”H Lift/Lock 5 Overlap Sheeting OLS-144 (12’) 540 Overlap Sheeting OLS-168 (14’) 630 Overlap Sheeting OLS-192 (16’) 720 Overlap Sheeting OLS-216 (18’) 810 Overlap Sheeting OLS-240 (20’) 900 Overlap Sheeting Stone Savers SS-3 3100 36” x 48” x 103” SS-5 4100 48” x 63” x 116” SS-7 4800 48” x 63” x 143” SS-9 5300 48” x 63” x 164” SS-12 5400 48” x 63” x 183” SS-15 7200 48” x 75” x 222” Transport Sled TS-20 5100 8’W x 20’L Rumble Grids RG-812 2400 8’W x 12’L RG-R12 1000 4’W x 12’L RG-720 3460 7’W x 20’L RG-R20 1670 4’W x 20’L Dura-Base Each 1125 10’ Tool Kit and Locks included *Discounts available for large or long jobs.

Alturna Mats AM-48 86 4’W x 8’L AM-38 65 3’W x 8’L AM-28 43 2’W x 8’L Versa Bridge 6 x 20 8000 6’W x 20’L 6 x 30 12500 6’W x 30’L 6 x 40 16000 6’W x 40’L 6 x 50 24500 6’W x 50’L Versa Bridge — Guardrails GR-20 800 GR-30 1000 GR-40 1400 GR-50 1700

Day

Week

4 Wks

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

$540 570 610 680 720 730 745 770 790 800 820 830

$1620 1695 183 2040 2150 2190 2240 2320 2370 2400 2460 2490

N/A N/A N/A N/A N/A N/A

$40 55 100 150 200 15

$115 165 280 420 560 45

$30 35 40 45 50

$50 55 60 65 70

$130 140 150 160 170

$130 150 160 190 220 240

$210 240 270 320 370 400

$ 630 720 810 950 1100 1210

$150

$220

$660

$ 80 20 120 35

$100 35 145 55

$300 100 430 160

$35

$75

$235

$15 15 15

$25 20 15

$70 60 50

N/A N/A N/A N/A

$ 426 613 817 1037

$1277 1840 2450 3111

N/A N/A N/A N/A

$ 46 65 85 104

$137 195 254 313

16

Miscellaneous Equipment Machine Control Systems Excavators

Dozers

Real time slope, depth & reach information to any reference Depthmaster PowerDigger Lite PowerDigger 2D Pow erDigge r 3D EziDig

Improve efficiency and flexibility, reduce material costs PowerBlade 1D PowerGrade 2D PowerGrade 3D

Graders

Pave asphalt, cement-bound material or stone quickly, easily and accurately PaveSmart 3D

Automatic slope and elevation control PowerDigger 2D PowerDigger 3D

104”Model Rugby 100LR Beam Laser Rugby 320SG Grade Laser Piper 200 for Sewer Laser

Pavers

Distance 3000’ 2500’ 650’

Day $80 50 80

Week $200 150 250

4 Weeks $600 450 750

Airport Snow Removal Trucks Series

Models

Engine Power

H Series

3

354 HP

HT Series

1

335 HP

P Series

6

380 HP

MPT Series

1

385 HP

Generators — Standby On-Site Commerical & Residential 48 kW QuietSource 600 kW

20 kW

25 kW

Power Generation Services Luby Equipment provides scheduled maintenance for power generation systems, including industrial, commerical, and residental generator sets, as well as automatic transfer switches, controls, fuel tanks, enclosures and remote monitoring software. Our expert technicians provide on-site regularly scheduled maintenance to ensure your power system is always operational. With Luby Equipment Services’ scheduled maintenance options, you can be sure your generator keeps your operations running.

17

Oilfield Services Complete Oilfield Air Packages

Man Lifts S-60

• Latest Atlas Copco Compressor: 1000 CFM @ 365 PSi • Boosters 4000 CFM to 1400 PSI • Experienced Supervision • Spill Proof Containment • Fuel Efficient

Man Lifts Rig Up/Down Rig Maintenance Rig Repair

Fork Lifts—Straight Mast & Long Reach GTH842C

XRVS965

Down Hole Hammers & Bits Long Reach Forklift Rig Up/Down Casing Handling Other Material Handling

Bits from 3” to 42”

Model

Hammer Bits

PDC Bits

Roller Cone Bits

586G 586H 588G 588H GTH636C GTH842C GTH1056

Type

Weight

Cap.

Reach

Day

Straight Straight Straight Straight Long/Tele Long/Tele Long/Tele

12200 13600 13500 15600 21000 22000 26000

6000 6000 8000 8000 6000 8000 10000

14’ 15’ 22’ 15’ 36’ 42’ 44’

$215 215 245 245 290 325 350

Also Available at Construction Branches

Bit Retrieval Systems

Week

4 Wks

$650 $1950 650 1950 735 2200 735 2200 830 2500 975 2950 1050 3200

18

Rental Terms and Conditions Credit Approval

Physical Damage — Rental equipment must be insured for full value

A Credit Application must be submitted and approved for any open account rentals. New accounts or cash only accounts, a deposit will be required and a credit card received and charged with prior approval in the amount of the twice expected rental.

and theft. Lessee must carry product liability coverage for all risk and

Freight Charges

LUBY Equipment Services Damage Waiver — LUBY Equipment Services

LUBY Equipment Services will allow the pick up and return to the closest LUBY branch. Loading, unloading, dismantling or assembling will be an additional charge. LUBY Equipment Services offers delivery and pick up to your job.

chosen, an additional cost will apply. This will eliminate your need to

Time Basis and Rates A one-day rental is based on eight (8) hours maximum use within a 24-hour period. A one week rental will allow 40-hours use in seven (7) days and a 4-week rental will allow 160 hours of use in a 28-day period. Additional hours and late returns will be charged at an overtime rate of 1/6 of the daily rate. If operating on double shift, rates will reflect 1.5 times the applicable rates. Triple shift operation will reflect 2 times the applicable rate. Weekend rentals are available from 3:00 p.m. Friday until 9:00 a.m. Monday morning with an 8hour maximum operating usage. Additional hours and late returns will be charged at an overtime rate of 1/6 of the daily rate. Holiday rentals are available from 3:00 p.m. the day prior to the holiday until 8:00 a.m. the following business day after the holiday. Eight (8) hours will be the maximum operating time available. Additional hours and late returns will be charged at a normal time rate of 1/6 of the daily rate.

Rental Period The rental period begins when equipment leaves the lessor’s yard and ends when the equipment is returned to the lessor’s yard. On out-of-town shipments, rentals start the day of the Bill of Lading of shipments and stop at the date of the returned Bill of Lading.

Damage Waiver Liability — Coverage must be assured for all risks and liability, from loss or all damages, for injuries or death to persons or destination of property arising out of the use, possession or transportation of rental equipment

against all risks or physical damage and loss, including vandalism liability. The lessee’s Certificate of Insurance must be provided prior to the delivery of equipment. LUBY Equipment Services must be named as additional insured in all Certificates of Insurance.

can provide physical damage waiver insurance coverage. If this is supply a Certificate of Insurance. The premium will be as noted on the rental contract.

This coverage allows a deductible equal to the monthly rental rate, which is the responsibility of the lessee, as part of the LUBY Equipment Services Damage Waiver Policy.

Rental Contract/Delivery Ticket A rental contract must be signed and executed on every rental transaction, with all pertinent data furnished prior to the release of the rental equipment. Lessee may be required to sign a UCC financing statement, which protects LUBY equipment Services’ security in the rented equipment.

Fuel, Repairs and Maintenance LUBY Equipment Services’ rental equipment will be delivered to the lessee in good operating condition and should be retuned to lessor in the same condition as delivered, less normal wear. Any condition that the lessee finds to be unsatisfactory must be indicated before the rental period begins. Lessee is responsible for the normal maintenance and lubrication, such as oil changes and filters during the rental period. The equipment will be delivered full of fuel. Fuel used will be charged. All repairs required due to abuse or negligence will be charged to the lessee upon return of damaged rental equipment.

All charges for abnormal clean-up will also be charged to the lessee.

If the rental unit is converted into a sale, all non-warrantable repairs and maintenance made during the rental period will be added to the conversion price.

19