William Hartawan - Portfolio

HProjects, Research, Experience; every content is all here...

PORTFOLIO.

Architecture, Urbanism.

William Hartawan.

KAMPUNG RAYA.

TYPOLOGY:

Residential - Public Housing. (Urbanism)

LOCATION:

Seminyak - Denpasar (Bali), Indonesia.

PROGRAM & COURSE:

RMIT University - Master of Architecture.

Architectural Major Project (Thesis).

CONTRIBUTION:

Concept & Schematic Design, Graphics & Illustrations, Visualizations.

“Kampung Raya” (or the Celebrated Village in Indonesian) seeks to develop an alternate high density urban typology for the city of Denpasar (Bali) in Indonesia, seeking to explore how can an incremental architectural intervention, specifically Public Housing can operate as an “infrastructure” within the city.

The project accommodates nearly 900 residents and residential units at a densely-tight site and it is built adjacent to the public amenity spaces in between the units and uses accessories as a typological component, specifically porosity and protection to adapt to its climatic conditions whilst keeping its indigenous spatial quality from the ‘Warung’ typology.

Denpasar (Bali), Indonesia.

Store’

Jimbaran, Bali.

(Local Indonesian Restaurant)’ In Nusa Dua, Bali.

Laundry and clothing.

Balinese Pavilion used for extra seating space.

Balinese arch indicating the name of the ‘gang’ (alleyway).

Car parking at footpath due to a narrow road.

Kos (Low-income Public Housing).

Storage Building.

Merajan (a Hindu praying shrine).

‘Kos’(Public Housing).

12% of 569 m2

Merajan (Hindu Shrine).

7% of 569 m2

of 569 m2 Balinese Pavilion (Extra Space).

12% of 569 m2

Seperate-owned Office.

Front Signange.

Convinience store. Parallel Parking.

Open Balcony.

2 - star hotel.

Stair Access to Hotel + Office.

Road.

Stone Cladding. Footpath. Hallway

Convinience Store.

24% of 266 m2

2-Star Hotel.

45% of 266 m2 Storage.

3% of 266 m2

REMIX ITERATION 1 REMIX ITERATION 2

Axonometric.

Small alleyway to shops and res. Units

The North Plaza.

TYPOLOGY:

Commercial - Retail Centre & Market.

LOCATION:

Tarneit - Melbourne, Victoria.

PROGRAM & COURSE:

RMIT University - Master of Architecture.

Year 2 - Architectural Design Studio 9.

CONTRIBUTION:

Concept & Schematic Design, Graphics & Illustrations, Visualizations.

Tarneit’s HustleHub aims to address the perceived disconnections in Tarneit by creating a social network among local businesses. The project site, located near Tarneit Senior College, becomes a space that encourages community engagement where students are invited to buy necessities, enjoy coffee, and study at the plaza. The design incorporates a strategy to connect business owners’ houses below the HustleHub, facilitating easier access to the storage room downstairs. The project includes retail and entertainment shops, temporary stalls, and a plaza for relaxation and study, fostering a sense of community and connectivity in Tarneit.

1) the backyard is transformed into shared spaces, establishing a trajectory relationship with the senior college and the shared backyard.

2) the building block are conceived by following the facing trajectory of the senior college and the north point axis. the massing is atop the suburban houses in order to allow daylight into the backyard.

3) the shift of the north section allows the plaza to give access into courtyard.

tarneit senior college

backyard

point axis

to tarneit senior college

3) the north section is lifted, allowing an extrusion of a space that can act as a central plaza which includes a cafe and meet up point.

BEGOINA ROAD

Exploded Axonometric.

Interior of Indoor Retail Market.

Office - Co-Working Space.

LOCATION:

Perth, Western Australia.

JOB & ROLE:

CO-Architecture - Perth, Western Australia.

Graduate of Architecture.

CLIENT: Undisclosed.

CONTRIBUTION:

Group Work & Collaboration.

Site Analysis, Concept & Schematic Design, Design Development, Rendering & Visualization, Technical Assistance (Revit).

Archive 808 aims to design a office co-working space, through a restoration of aformer heritage site, with brickwork materials and altering existing interior spaces. It is located in Perth, Western Australia.

The project went through site analysis as well as the preperation of schematic design concepts to town planning drawings.

Initial Design Sketch Proposal.

West External Elevation.

ENTRANCE DOOR TO SHOWROOM WITH SHROUD PROJECTION ON RIGHT SIDE (WITH CLEAR GLASS PANELS) ACCESSIBITLY RAMP TO BE ADDED

ANY VARIATION IN FLOOR LEVELS ALONG THE SIDE LANE SHOULD BE CONSIDERED TO ENSURE THAT THE TRELLIS HEIGHT IS ADJUSTED SO THAT ITS TOP ALIGNS WITH THE TOP OF THE GATE

PROTRUDING SECTION OF THE 2mm THICK 50X50mm GALVANIZED STEEL BOX TUBE

2mm THICK 50x50mm GALVANIZED STEEL BOX TUBE (WITH LED LIGHT SLOT ON THE UNDERSDIE)

2mm THICK 50x50mm GALVANIZED STEEL SHS TRELIS FRAME

2mm THICK 50x50mm GALVANIZED STEEL ANGLE FOR TRELLIS SUB-FRAME

ELEVATION LEVEL TO ALIGHN WITH THE LANEWAY WINDOW'S LINTEL LEVEL

3.2 mm THICK STAINLESS STEEL 316 GRADE TENSIONED WIRE FOR TRELLIS MOUNTED AT 150mm CTC DISTANCE HORIZONTALLY AND 150mm CTC DISTANCE VERTICALLY

CASTOR WITH 160mm LOADING HEIGHT AND 200KG LOAD CAPACITY. TWO WITH ADN TWO WITHOUT BRAKES

PROPSED CONCRETE SEATING BENCH ON CASTORS

PROPSED METAL-FRAMED C SHAPED BENCH AS SPECIFIED

Education - University Building.

LOCATION:

Carlton - Melbourne, Victoria.

PROGRAM & COURSE:

RMIT University - Bachelor of Architectural Design

Year 3 - Architectural Technology 4

CONTRIBUTION:

Group Work Collaboration: With Miho Hashimoto.

Teamwork & Coordination, Design Documentation.

This project is located on Carlton, adjacent to the Melbourne CBD, within close proximity to the RMIT University Precinct which consisted of university buildings within the city. RMIT became the client for this project and wishes to build a performing arts school for students studying dance and performance courses.

The project focused on the documentation of the project, where facade details and architectural plans, section and elevations were produced.

AUDITORIUM

FALL 1°

SPYHONIC DRAINAGE SYSTEM AS SPECIFIED CONCRETE TILING FINISH AS SPECIFIED

SECTION WITH SOFT BRUSH FINISH 4 mm TO ATTACH IN CONCRETE UPSTAND

STEEL ANGLED BRACKETS, FIXED WITH POP RIVETS

AGRAFFE, 5MM ALUMINIUM, FIXED ONTO FACADE PANEL

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

TILTED SUSPENDED CEILING

RED WOOD AUDITORIUM ACOUSTIC PANEL ATTACHED TO CONCRETE PANEL

BACKING ROD WITH SEALENT

CONCRETE UPSTAND

DYNABOLT 40 mm FIXED ON CONCRETE UPSTAND

GALVANISED STEELANGELED BAR 60 mm FIXED TO CONCRETE UPSTAND

ALUMINIUM POP RIVETS AT DIAMETER 4.8 mm

THREADED TIE

BARSCREWED INTO CASTINFERRULES PRIOR TOCASTING THE FLOOR

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

DYNABOLT, ANCHORING WALL CONSOLE ONTO THE CONRETE WALL

METAL WALL CONSOLE, FIXING VERTICAL PROFILE AND CONCRETE WALL TOGETHER

AGRAFFE, 5MM ALUMINIUM, FIXED ONTO FACADE PANEL

CONCRETE TILING FINISH AS SPECIFIED

SPYHONIC DRAINAGE SYSTEM AS SPECIFIED

PACKER TO ATTACH AND FIX WITH BOX SECTION

ZINC PARAPET CAPPING TO MATCH WITH PACKER

STAINLESS STEEL BOX SECTION WITH SOFT BRUSH FINISH 4 mm TO ATTACH IN CONCRETE UPSTAND

BACKING ROD WITH SEALENT

CONCRETE UPSTAND

DYNABOLT 40 mm FIXED ON CONCRETE UPSTAND

GALVANISED STEELANGELED BAR 60 mm FIXED TO CONCRETE UPSTAND

ALUMINIUM POP RIVETS AT DIAMETER 4.8 mm

THREADED TIE

STEEL ANGLED BRACKETS, FIXED WITH POP RIVETS

AGRAFFE, 5MM ALUMINIUM, FIXED ONTO FACADE PANEL

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

TILTED SUSPENDED CEILING

RED WOOD AUDITORIUM ACOUSTIC PANEL ATTACHED TO CONCRETE PANEL

BARSCREWED INTO CASTINFERRULES PRIOR TOCASTING THE FLOOR

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

DYNABOLT, ANCHORING WALL CONSOLE ONTO THE CONRETE WALL

METAL WALL CONSOLE, FIXING VERTICAL PROFILE AND CONCRETE WALL TOGETHER

AGRAFFE, 5MM ALUMINIUM, FIXED ONTO FACADE PANEL

RevDescriptionDate

RED MARBLE TILE FINISH TO MATCH WITH MORTAR BED

MORTAR

SCREED

ALUMINIUM CURTAIN WALL TO MATCH CONCRETE SLAB

ALUMINIUM WINDOW SILL TO SIT ABOVE PACKER

TUNDRA GREY CONCRETE TILE FLOORING AS SPECIFIED & SCHEDULED

EXISITING FOOTPATH

U BAR AS PER STRUCTURAL ENGINEER

GALVANIZED STEEL ANGLED BAR 60 mm TO WELD IN CONCRETE WALL

CAST IN-PLATE WELDED TO ANGLED BAR

REINFORCED MESH IN SLAB

PROJECTING STEEL BARS FROM SLAB

SQUARE COLOUMN

GLASS REINFORCED CONCRETEFACADE PANEL, 13MM , FIXED WITH AGRAFFE

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

T SHAPE ANGLE STAINLESS STEEL VERTICAL MEMBRANE, FIXED ONTO THE WALL CONSOLE

METAL WALL CONSOLE, FIXING VERTICAL PROFILE AND CONCRETE WALL TOGETHER

DYNABOLT, ANCHORING WALL CONSOLE ONTO THE CONRETE WALL

WALL

AGRAFFE, 5MM ALUMINIUM, FIXED ONTO FACADE PANEL

6TH

STAINLESS STEEL, BOX SECTION WITH SOFT BRUSH FINISH, FIXED WITH STEEL BRACKETS

STEEL ANGLED BRACKETS, FIXED WITH POP RIVETS

THREADED TIE BAR SCREWED INTO CAST-IN FERRULES PRIOR TO CASTING THE FLOOR

STAINLESS STEEL, BOX SECTION WITH SOFT BRUSH FINISH, FIXED WITH STEEL BRACKETS

STAINLESS STEEL, BOX SECTION WITH SOFT BRUSH FINISH 4MM, FIXED WITH STEEL BRACKETS

GALVANISED STEEL ANGLED BAR 60MM, FIXED ON CONCRETE WALL

RIVETS

REBATES ON CONCRETE WALL SILICONE

GAP BETWEEN REBATE AND BOX SECTION

REBATES ON CONCRETE WALL SILICONE SEALANT, SEALING GAP BETWEEN REBATE AND BOX SECTION

DYNABOLT, 40MM FIXED ON CONCRETE WALL

GLASS REINFORCED CONCRETEFACADE PANEL,

WITH

SUSPENSION RAILS, 5MM ALUMINIUM, FIXED ONTO WALL CONSOLE

William Hartawan

Phone: +61 411194994

email: williamhartawan@yahoo.com

Profile: linkedin.com/in/williamhartawan

For More Content:

issuu.com/williamhartawan9583/docs/william_hartawan_-_portfolio

Turn static files into dynamic content formats.

Create a flipbook