Hard Solid (extended ear-tip) Removal Tool To remove the receiver from a Hard Solid Shell, it is recommended to use the provided removal tool (item code 6 036 0002 000) to reduce the risk of damage to the receiver wire. Step 1: Attach the removal tool to the end of the receiver until it snaps on (Figure 1) Step 2: Pull the receiver straight out from the shell (Figure 2)
Figure 1
Note: The Hard Solid Shell provides an extended sound bore for better gain optimization and dual wax protection. NanoCareTM wax guards are placed at the end of the receiver and at the end of the shell.
DIB28/0218
Figure 2
WWW.WIDEXPRO.COM