Construction Documents

PRODUCED BY AN AUTODESK STUDENT VERSION

URBAN OASIS SPA - ISSUED FOR CONSTRUCTION

PROJECT INDEX:

DRAWING INDEX: ARCHITECTURAL

CODE INFORMATION:

OWNER AIV HOLDINGS 1367 WEST BROADWAY, VANCOUVER, BC V6H 4A7 CONTACT: SHELLEE O'LEARY PHONE: 604-717-8080 EMAIL: SOLEARY@LASALLECOLLEGEVANCOUVER.COM FAX: 604-717-8082

A-000 COVER PAGE

THIS PROJECT IS DESIGNED UNDER THE 2018 VANCOUVER BUILDING BYLAW

ELECTRICAL ENGINEER: COBALT ENGINEERING 00 GRANVILLE STEET, VANCOUVER, BC, V6C 1S4 CONTACT: KAI CHEN PHONE: 604-687-1800 EMAIL: KCHEN@COBALTENGINEERING.COM FAX: 604-731-6582 STRUCTURAL ENGINEER: CWMM CONSULTING ENGINEERS LTD. 7 AVE W, VANCOUVER, BC V6H 1C1 CONTACT: PATRICK LAM PHONE: 604-731-6584 EMAIL: PLAM@CWMM.COM FAX: 604-731-6582 CONTRACTOR: REOTECH CONSTRUCTION LTD. 1550 HARTLEY AVE, COQUITLAM, BC, V3K 7A1 CONTACT: AL DIETRICH PHONE: 604-540-2323 EMAIL: ADIETRICH@REOTECH.COM FAX: 604-540-2311

A-200 CONSTRUCTION PLAN A-300 REFLECTED CEILING PLAN

AREA OF TENANT IMPROVEMENT: 1036.052 m2 (11,151.98 SQ FT)

A-400 ELEVATIONS A-401 ELEVATIONS A-402 ELEVATIONS

AVAILABLE WC PROVIDED BY BASE BUILDING: 3 FOR MALE 3 FOR FEMALE

TOTAL TRAVEL DISTANCE: 148 FT

EXITS REQUIRED: 2

MAXIMUM ALLOWABLE TRAVEL DISTANCE: 300 FT

EXITS PROVIDED: 3

THIS IS A SPRINKLER BUILDING OF NON-COMBUSTIBLE CONSTRUCTION

DOORS PROVIDING ACCESS HAVE CLEAR LEVEL AREAS TO COMPLY WITH VBL 3.3.1.12 (10)

REQUIRED WC DUE TO OCCUPANT LOAD: 3 FEMALE (1 ACCESSIBLE) 3 MALE (1 ACCESSIBLE)

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CONSULTANT

A-500 SECTIONS A-501 SECTIONS A-600 DETAILS A-700 FINISHES

PERMIT STAMP

A-800 FURNITURE PLAN A-900 SCHEDULES SEAL

LEGAL DESCRIPTION: PID:008533296 FOLIO NO: 120606970000 LOT: B BLOCK: 8 DISTRICT LOT: 185 PLAN: VAP13618

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

COVER SHEET DRAWING ISSUED FOR

INDICATES AREA OF CONSTRUCTION

RENFREW STREET

MECHANICAL ENGINEER: FLOW CONSULTING GROUP INC. 1444 ALBERNI STREET, VANCOUVER, BC V6G 2Z4 CONTACT: TONY LEUNG PHONE: 604-609-0500 EMAIL: TLEUNG@FLOWGROUP.CA FAX: 604-609-0588

A-100 DEMOLITION PLAN

OCCUPANCY: OCCUPANCY D BUSINESS AND PERSONAL SERVICES

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

0'-1/16" = 1'-0" DRAWING NO.

A-000

HEBB AVENUE

PRODUCED BY AN AUTODESK STUDENT VERSION

INTERIOR DESIGN CONSULTANT: LASALLE COLLEGE 2665 RENFREW STREET, VANCOUVER, BC V5M 0A7 CONTACT: WHITNEY LE NGUYEN PHONE: 604-816-6164 EMAIL: WNGUYENN@LIVE.CA FAX: 604-816-6162

A-001 SPECIFICATIONS

OCCUPANT LOAD: 30.5FT PER PERSON OFFICE AREA: 960.25 SQ FT 112 PERSONS OCCUPANCY

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

DEMOLITION GENERAL NOTES: 1.

2.

3.

4.

5.

6.

7.

8.

9.

PRODUCED BY AN AUTODESK STUDENT VERSION

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

10.

11.

ALL WORK MUST COMPLY WITH THE BC BUILDING CODE AND THE CITY OF VANCOUVER. ALL WORK IN BUILDING MUST COMPLY WITH THE BUILDING OWNER'S REGULATIONS. CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL OF ALL DEMOLISHED ITEMS AND DEBRIS FROM SITE UNLESS OTHERWISE NOTED. COORDINATE EXTERIOR DEBRIS BIN LOCATIONS WITH OWNER. ALL CONSTRUCTION DEBRIS MUST BE DISPOSED OF IN ACCORDANCE WITH THE CONSTRUCTION WASTE MANAGEMENT SECTION IN THE DRAWING SPECIFICATIONS. THE OWNER RESERVED THE RIGHT TO RETAIN SALVAGED ITEMS REMOVED FROM FLOOR WITH OWNER BEFORE REMOVAL. PATCH AND MAKE GOOD ANY EXISTING ITEMS AFFECTED BY DEMOLITION. CONTRACTOR TO TAKE PRECAUTIONS TO PROTECT EXISTING AREA UNAFFECTED BY CONSTRUCTION. CONTRACTOR RESPONSIBLE FOR ANY DAMAGE TO UNAFFECTED AREAS. COORDINATE DEMOLITION WITH MECHANICAL, ELECTRICAL, AND STRUCTURAL DRAWINGS. CONTRACTOR TO ENSURE ALL ELECTRICAL AND PLUMBING IS CAPPED OFF AND LEFT IN A SAFE CONDITION. SHUT OFF VALVES REQUIRED FOR ALL PLUMBING AND HVAC SERVICES. CONTRACTOR TO RETAIN ANY EXISTING HEALTH AND SAFETY SIGNAGE AND REINSTALL TO SUIT NEW LAYOUT. EXISTING MAIN ENTRY DOOR TO REMAIN. CONTRACTOR TO COORDINATE DEMOLITION WITH THE CONSTRUCTION PLAN. CONTACT DESIGNER IMMEDIATELY IF VARIES.

PERMIT STAMP

DEMOLITION KEYNOTES: CONTRACTOR TO DEMOLISH PORTION OF PARTITION OF EXISTING WALL. PATCH AND REPAIR TO RECEIVE NEW FINISH.

SEAL

CONTRACTOR TO CAREFULLY REMOVE EXISTING MILLWORK. CONTACT OWNER FOR STORAGE LOCATION.

6,7( /(*(1'

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME.

6<0%2/

'(6&5,37,21

x

EXISTING PARTITIONS TO REMAIN

x

ITEMS TO BE DEMOLISHED

THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DEMOLITION PLAN DRAWING ISSUED FOR

PERMIT

DEMOLITION PLAN 1 A-100 1/8"=1'0"

PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-100

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

GENERAL NOTES: 1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

PRODUCED BY AN AUTODESK STUDENT VERSION

15.

16.

17.

CONTRACTOR SHALL COMPLY WITH THE RULES AND REGULATIONS FOR THE CONSTRUCTION WITHIN THE BUILDING AS SET BY THE OWNER. CONTRACTOR TO CO-ORDINATE WORK WITH BUILDING MANAGER. ANY WORK WHICH MAY DISRUPT OTHER OCCUPANTS’ ACTIVITY SHALL BE DONE AFTER NORMAL BUSINESS HOURS CONTRACTOR TO ENSURE CONTAMINANTS ARE NOT SPREAD TO ADJACENT AREAS. CONTRACTOR SHALL PROTECT EXISTING FINISHES FROM DAMAGE DURING CONSTRUCTION. REPAIR AND MAKE GOOD ALL SURFACES AFFECTED BY DEMOLITION/CONSTRUCTION. DESIGN CONSULTANT’S DRAWINGS SHALL BE READ IN CONJUNCTION WITH STRUCTURAL, MECHANICAL, AND ELECTRICAL CONSULTANT’S DRAWINGS. CONTRACTOR TO X-RAY SLAB PRIOR TO ANY CUTTING OR DRILLING CONTRACTOR TO CONFIRM ALL DIMENSIONS ON SITE PRIOR TO CONSTRUCTION. DISCREPANCIES IN DRAWINGS SHALL BE REPORTED TO THE DESIGNER IMMEDIATELY, PRIOR TO CONSTRUCTION. NO CONTRACT REVISIONS OR EXTRAS WILL BE ALLOWED FOR FAILURE TO VERIFY SITE CONDITIONS AND DIMENSIONS. CONTRACTOR SHALL CONFIRM SIZES OF OWNER’S EQUIPMENT & APPLIANCES PRIOR TO CONSTRUCTION. DESIGNER/OWNER TO APPROVE PARTITION LAYOUT PRIOR TO BOARDING. CONSTRUCTION FOR ALL PARTITION TYPES MUST MAINTAIN ACOUSTICAL INTEGRITY AND FIRE RATING OF WALL. ALL WALLS ABUTTING EXTERIOR GLAZING TO BE CENTERED ON THE MULLION, UNLESS OTHERWISE NOTES IN PLAN. ENSURE A SOUND AND LIGHT TIGHT CONNECTION. CONTRACTOR TO INSTALL NECESSARY BLOCKING IN WALL AT LOCATION OF NEW MILLWORK, FURNISHINGS, FIXTURES, AND EQUIPMENT PRIOR TO GWB BEING INSTALLED. INSTALL LEVEL AND PLUMB. RIGIDLY ANCHORED TO STRUCTURE. TELEPHONE AND DATA ARE TO BE INSTALLED BY CLIENT. CONTRACTOR TO SUPPLY AND INSTALL ALL REQUIRED CONDUIT AND BOXES (AS PER ELECTRICAL DRAWINGS).

CONTRACTOR SHALL COORDINATE FINAL INSPECTION DATE WITH DESIGNER, WHO WILL DECLARE SUBSTANTIAL COMPLETION, PRIOR TO MOVE IN. ALL MATERIAL AND WORKMANSHIP MUST BE WARRANTED FOR TWO YEARS FROM THE DATE OF SUBSTANTIAL COMPLETION. TYP X DRYWALL IN ALL WET LOCATIONS (I.E. SHOWERS) WALL AND CEILING. SUPPLY AND INSTALL NEW GLAZING FILM. PRODUCT: TBD MANUFACTURER: TBD CODE: TBD SIZE: TBD INSTALLATION: 161 " TO DOTS @ O.C. MOUNTED @ 5'-0" AFF 4" WALL AND DOOR

SUPPLY AND INSTALL NEW WHITEBOARD I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: 3'-0" AFF TO BOTTOM OF WHITEBOARD SUPPLY AND INSTALL GRAB BARS TO ACCESSIBLE WASHROOMS AS REQUIRED BY CODE. I. MANUFACTURER: TBD II. PRODUCT: TBD III. CODE: TBD IV. SIZE: TBD SUPPLY AND INSTALL TOILET DISPENSER AS SPECIFIED. I. MANUFACTURER: TBD II. PRODUCT: TBD III. CODE: TBD IV. SIZE: TBD SUPPLY AND INSTALL PAPER TOWEL DISPENSER. I. MANUFACTURER: TBD II. PRODUCT: TBD III. CODE: TBD IV. INSTALLATION: TO BE MOUNTED AT __'-__" AFF. CONTRACTOR TO ENSURE ADEQUATE BLOCKING IN WALL. SUPPLY AND INSTALL SOAP DISPENSER. I. MANUFACTURER: TBD II. PRODUCT: TBD III. CODE: TBD IV. INSTALLATION: TO BE MOUNTED AT __'-__" AFF. CONTRACTOR TO ENSURE ADEQUATE BLOCKING IN WALL. SUPPLY AND INSTALL COAT HOOK. H12.

RECESSED FLOOR MONUMENT.

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

14.

CONSTRUCTION KEYNOTES:

PERMIT STAMP

SEAL

WALL SCHEDULE SYMBOL

DESCRIPTION 1 1 2" GWB BOTH SIDES OF 32" STEEL STUDS @

16" OC. C/W ACOUSTIC BATT INSULATION TO U/S OF SLAB ABOVE.

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO,

CONSTRUCTION PLAN 1 A-200 1/8"=1'0"

1 1 2" GWB BOTH SIDES OF 32" STEEL STUDS @

16" OC C/W ACOUSTIC BATT INSULATION TO U/S OF FINISHED CEILING.

SITE LEGEND SYMBOL

DESCRIPTION INDICATES EXISTING WALL

INDICATES NEW WALL INDICATES NEW MILLWORK. REFER TO ELEVATIONS & MILLWORK SECTIONS INDICATES NEW DOOR. REFER TO DOOR AND HARDWARE SCHEDULE. ROOM NAME ROOM NUMBER ELEVATION SYMBOL

INDICATES WALL TYPE

1 1 2" GWB BOTH SIDES OF 32" STEEL STUDS @

16" OC. C/W R6 FIBRE GLASS NOISE STOP BLANKET TO ALL STUD VOIDS, TO U/S OF FINISHED CEILING. PROVIDE ACOUSTIC SEALANT WHERE WALL MEETS FINISHED CEILING AND PROVIDE 2" FOIL BACKED RIGID FIBREGLASS SOUND BOARD ABOVE FINISHED CEILING TO U/S OF SLAB ABOVE.

GWB BOTH SIDES OF 321" STEEL STUDS @ 16" OC. C/W ACOUSTIC BATT INSULATION TO U/S OF SLAB ABOVE (OR FINISHED CEILING). ***THICKNESS TO MATCH EXISTING. PLUMBING WALL. 1 2" GWB BOH SIDES OF 8" STEEL STUDS @ 16" OC. C/W ACOUSTIC BATT INSULATION TO U/S OF FINISHED CEILING. PROVIDE GASKET & CAULKING WHERE WAL MEETS FINISHED CEILING. PLUMBING WALL. 1 5 2" GWB BOTH SIDES OF 58" STEEL STUDS @ 16" OC. C/W ACOUSTIC BATT INSULATION TO U/S OF FINISHED CEILING. PROFVE GASKET & CAULING WHERE WALL MEETS FINISHED CEILING.

THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

CONSTRUCTION PLAN DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-200

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

GENERAL NOTES:

CONSTRUCTION KEYNOTES: NEW CEILING TO MATCH EXISTING CEILING NEW CEILING MOUNTED PROJECTOR RO BE SUPPLIED AND INSTALLED BY CLIENT. CONTRACTOR TO SUPPLY AND INSTALL POWER AND DATA REQUIREMENTS AS PER ELECTRICAL CONSULTANT'S DRAWINGS. CONTRACTOR TO PROVIDE ADEQUATE STRUCTURAL SUPPORT IN CEILING PLENUM FOR EQUIPMENT.

1.

2.

3.

4.

RECESSED SCREEN IN DRYWALL BULKHEAD (MEETING ROOM) 5.

/(*(1' SYMBOL

DESCRIPTION

6.

INDICATES CEILING HEIGHT

PRODUCED BY AN AUTODESK STUDENT VERSION

INDICATES NEW GWB CEILING/BULKHEAD. HEIGHT AS SHOWN

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

INDICATES NEW 2'-0" x 4'-0" CEILING TILE WITH T-BAR CEILING GRID. I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD INDICATES NEW 2'-0" x 2'-0" ACOUSTIC CEILING TILE WITH T-BAR CEILING GRID I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

ALL CEILING SHALL BE 9’-0” ABOVE FINISHED FLOOR UNLESS OTHERWISE NOTED. ALL GWB IS P1 UNLESS OTHERWISE NOTED. THIS DRAWING INDICATES EXISTING CEILING, NEW CEILING CONSTRUCTION AND FINISHES. FOR COMPLETE LIGHTING REQUIREMENTS, REFER TO ELECTRICAL DRAWINGS. COORDINATION IS REQUIRED BETWEEN ARCHITECTURAL AND ELECTRICAL DRAWINGS – REPORT ANY DISCREPANCIES TO DESIGNER IMMEDIATELY. REFER TO ELECTRICAL AND MECHANICAL CONSULTANTS DRAWINGS FOR TECHNICAL INFORMATION INCLUDING CIRCUITRY, POWER REQUIREMENTS, DIFFUSER LOCATIONS AND SWITCHING, ETC. THE CONTRACTOR SHALL REFER TO ELECTRICAL AND MECHANICAL CONSULTANTS DRAWINGS AND SPECIFICATIONS FOR ALL NIGHT LIGHTS, EMERGENCY LIGHTING, EXIT SIGNS, AND FIRE PROTECTION EQUIPMENT AS REQUIRED BY THE LOCAL BUILDING CODE. CONTRACTOR IS RESPONSIBLE FOR INSTALLING ALL LIFE SAFETY MECHANICAL AND SPRINKLERS, FIRE EXTINGUISHERS IN ACCORDANCE WITH CODE REQUIREMENTS FOR QUANTITY AND PLACEMENT, TO SUIT THE NEW LIGHTING LAYOUT. THE CONTRACTOR SHALL REFER TO ELECTRICAL AND MECHANICAL CONSULTANTS DRAWINGS FOR DESIGN OF THESE SYSTEMS. THE LOCATIONS OF FIXTURES, REGISTERS, SWITCHES, ETC. SHALL BE AS SHOWN IN THE CONSULTANTS DRAWINGS. VERIFY ANY DISCREPANCY OF SWITCH LOCATIONS WITH DESIGNER. BASE BUILDING MECHANICAL TO BE ADJUSTED TO SUIT NEW PARTITION LAYOUT AND EQUIPMENT/OCCUPANT LOAD (REFER TO MECHANICAL CONSULTANTS DRAWINGS).

THE CONTRACTOR IS RESPONSIBLE FOR BALANCING THE AIR FOLLOWING MOVE-IN AND SUBMITTING A REPORT TO THE CLIENT. REINFORCE CEILING GRIDS AND LIGHT FIXTURES FOR SEISMIC RESTRAINT, AS REQUIRED BY CODE. T-BAR SYSTEMS FOR LAY-IN TILE CEILINGS ARE TO HAVE PROPER CONNECTIONS AT INTERSECTIONS BETWEEN MAIN AND CROSS TEES IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. SECONDARY TEES ARE NOT TO BE LAID LOOSE. CONTACT DESIGNER FOR APPROVAL ON LOCATIONS OF ALL LIGHT FIXTURES, DIFFUSERS, AND SPEAKERS PRIOR TO INSTALLATION. THE CONTRACTOR SHALL VERIFY ALL FIELD CONDITIONS AND LOCATIONS OF ALL PLUMBING, DUCTS, STRUCTURAL ELEMENTS AND ANY OTHER APPLICABLE ITEMS.ARRANGE AND MODIFY NONVISIBLE ITEMS TO ENSURE ADEQUATE CLEARANCES FOR CEILING AND LIGHTING LAYOUT AS SHOWN. IF ANY OBSTRUCTIONS INTERFERE WITH LIGHTING LAYOUT NOTIFY DESIGNER IMMEDIATELY PRIOR TO COMMENCING WITH INSTALLATION. CAREFULLY REMOVE ANY EXISTING LIGHT FIXTURE REQUIRED TO ALLOW ACCESS INTO MECHANICAL DUCT UNITS, OR TO ALLOW INSTALLATION OF PAGINS SPEAKERS (SPEAKERS INSTALLED BY TENANT’S TELEPHONE CONTRACTOR).

WITHIN (2) TWO WEEKS OF COMPLETION OF PROJECT, MECHANICAL AND ELECTRICAL CONTRACTORS SHALL PROVIDE ‘AS BUILT’ DRAWINGS TO THE CLIENT. PROVIDE FLUSH MOUNTED SPRINKLERS FOR ALL GWB CEILINGS UNLESS OTHERWISE NOTED. CONTRACTOR TO PROVIDE DRYWALL ACCESS PANELS AS REQUIRED. COORDINATE SIZE AND LOCATION OF ALL ACCESS PANELS WITH DESIGNER PRIOR TO INSTALLATION. THE CONTRACTOR SHALL ALLOW FOR CUTTING AND REPAIRING CEILING TILES FOR ANY MECHANICAL WORK. CONTRACTOR TO PATCH AND MAKE GOOD EXISTING CEILING TILE AND T-BAR AS REQUIRED. CEILING TO BE ALIGNED THROUGHOUT. ALL SWITCHES AND FACEPLATES TO BE DECORA STYLE, WHITE. ALL SWITCHES AND DIMMERS ARE TO BE LOCATED AT 39” AFF TO CENTERLINE OF SWITCH PLATE UNLESS OTHERWISE SPECIFIED.

PERMIT STAMP

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

REFLECTED CEILING PLAN

REFLECTED CEILING PLAN 1 A-300 1/8"=1'0"

DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-300

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

GENERAL NOTES: 1.

2.

3.

4.

5.

01 A-500

RECEPTION DESK NORTH ELEVATION A A-200 1/4"=1'0"

6.

7.

8.

02 A-500

RECEPTION DESK EAST ELEVATION B A-200 1/4"=1'0"

ALL MILLWORK TO BE OVERLAY CONSTRUCTION. ALL DOORS TO BE PLASTIC LAMINATE ALL FACES. INTERIOR CABINETS AND SHELVES TO BE MELAMINE. SCRIBE ALL COUNTERS TO WALL. ALL WOOD GRAIN LAMINATE AND WOOD VENEER TO BE INSTALLED VERTICALLY UNLESS OTHERWISE NOTED. ALL CABINET HINGES TO BE H16.

ALL DRAWER SLIDES TO BE H20.

ALL CABINET/DRAWER PULLS TO BE H19 - TOUCH LATCH HARDWARE.

RECEPTION DESK SOUTH ELEVATION C A-200 1/4"=1'0"

03 A-500

04 A-500

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CREDENZA NORTH ELEVATION D A-200 1/4"=1'0"

02 A-500

MANICURE COUNTER EAST ELEVATION E A-200 1/4"=1'0"

MANICURE COUNTER SOUTH ELEVATION F A-200 1/4"=1'0"

MANICURE COUNTER EAST ELEVATION G A-200 1/4"=1'0"

PRODUCED BY AN AUTODESK STUDENT VERSION

PERMIT STAMP

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

DISPLAY CABINET WEST ELEVATION H A-200 1/4"=1'0"

BANQUET EAST ELEVATION I A-200 1/4"=1'0"

BANQUET EAST ELEVATION J A-200 1/4"=1'0"

WOMEN'S WASHROOM SOUTH ELEVATION AT ENTRY K A-200 1/4"=1'0"

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

ELEVATIONS DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440 WOMEN'S WASHROOM EAST ELEVATION L A-200 1/4"=1'0"

M WOMEN'S WASHROOM EAST ELEVATION A-200 1/4"=1'0"

WOMEN'S WASHROOM EAST ELEVATION N A-200 1/4"=1'0"

O WOMEN'S WASHROOM SOUTH ELEVATION AT SINK A-200 1/4"=1'0"

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-400

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

05 A-500

04 A-600

04 A-500

06 A-500

TYPICAL ACCESSIBLE WASHROOM P A-200 1/4"=1'0"

Q TYPICAL ACCESSIBLE WASHROOM A-200 1/4"=1'0"

R1/ R2 WOMEN'S SHOWER WEST/SOUTH ELEVATION A-200 1/4"=1'0"

RECEPTION ROOM 115 SOUTH ELEVATION S A-200 1/4"=1'0"

05 A-500

05 A-500

04 A-500

04 A-500

05 A-500

04 A-500

07 A-500

07 A-500

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

06 A-500

06 A-500

OPEN WORKSTATION AREA 115 EAST ELEVATION T A-200 1/4"=1'0"

CORRIDOR 121 SOUTH ELEVATION U A-200 1/4"=1'0"

06 A-500

OPEN WORKSATION AREA 115 AT MEETING ROOM 119 EAST ELEVATION V A-200 1/4"=1'0"

08 A-500

09 A-500

11 A-500

PERMIT STAMP

SEAL

09 A-500

13 A-500

PRODUCED BY AN AUTODESK STUDENT VERSION

13 A-500

07 A-500 12 A-500

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. 10 A-500 10 A-500

OPEN OFFICE AREA AT MEETING ROOM 122 EAST ELEVATION X A-200 1/4"=1'0"

THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

CORRIDOR 121 NORTH ELEVATION Y A-200 1/4"=1'0"

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

ELEVATIONS DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

STAFF ROOM 128 SOUTH ELEVATION Z A-200 1/4"=1'0"

AS SPECIFIED

DRAWING NO.

A-401

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

01 SECTION AT RECEPTION DESK A-400 3/4"=1'0"

02 SECTION AT CREDENZA A-400 3/4"=1'0"

03 SECTION AT COUNTER A-400 3/4"=1'0"

04 SECTION AT COUNTER W/ 4 DRAWERS A-400 3/4"=1'0"

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

PERMIT STAMP

SEAL

05 SECTION AT DISPLAY CABINET A-400 3/4"=1'0"

06 SECTION AT RAISED BANQUETTE A-400 3/4"=1'0"

07A SECTION AT WASHROOM COUNTER A-400 3/4"=1'0"

07B SECTION AT UPPER CABINET A-400 3/4"=1'0"

08 SECTION AT BASE CABINET W/ PLAM COUNTER A-400 3/4"=1'0"

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

SECTIONS 10 SECTION AT QUARTZ COUNTER A-400 3/4"=1'0"

11 SECTION AT BASE CABINET W/ QUARTZ COUNTER AT SINK A-400 3/4"=1'0"

12 SECTION AT BASE CABINET W/ QUARTZ COUNTER W/ 4 DRAWERS A-400 3/4"=1'0"

DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-500

PRODUCED BY AN AUTODESK STUDENT VERSION

09 SECTION AT BASE CABINET W/ QUARTZ COUNTER A-400 3/4"=1'0"

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

01 DETAIL- TYP WALL TO MULLION CONNECTION A-200 3" = 1'-0"

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

PERMIT STAMP

SEAL

03 DETAIL- BULKHEAD AT PEDICURE STATION A-200 3" = 1'-0"

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DETAILS PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-600

PRODUCED BY AN AUTODESK STUDENT VERSION

02 DETAIL- BULKHEAD IN RECEPTION A-200 3" = 1'-0"

04 DETAIL- FRAMELESS GLAZING TO WALL/COLUMN CONNECTION A-200 3" = 1'-0"

DRAWING ISSUED FOR

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

PRODUCED BY AN AUTODESK STUDENT VERSION

PERMIT STAMP

05 DETAIL- FRAMELESS GLAZING AT CEILING A-200 3" = 1'-0"

07 DETAIL- FRAMELESS GLAZING AT GWB BULKHEAD TO T-BAR CEILING CONNECTION A-200 3" = 1'-0"

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DETAILS DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

06 DETAIL- FRAMELESS GLAZING AT FLOOR A-200 3" = 1'-0"

08 DETAIL- GWB CEILING TO GWB BULKHEAD A-200 3" = 1'-0" PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

DRAWING NO.

A-601

REVISION

R1

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

09 DETAIL- GWB CEILING TO T-BAR CEILING A-200 3" = 1'-0"

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

PERMIT STAMP

SEAL

13 DETAIL- FRAMED GLAZING AT UPPER WALL CONNECTION A-200 3" = 1'-0"

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO,

10 DETAIL- GLASS TO GLASS CONNECTION TO CORNER A-200 3" = 1'-0"

THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DETAILS DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440 11 DETAIL- FRAMED GLASS TO GLASS CONNECTION A-200 3" = 1'-0"

12 DETAIL- FRAMED GLAZING TO FLOOR CONNECTION A-200 3" = 1'-0"

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-602

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

PRODUCED BY AN AUTODESK STUDENT VERSION

PERMIT STAMP

14 DETAIL- DOOR HEADER AT T-BAR TO T-BAR CEILING A-200 3" = 1'-0" SEAL

15 DETAIL- FRAMED GLAZING TO UPPER WALL AT T-BAR TO T-BAR CEILING CONNECTION A-200 3" = 1'-0" DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DETAILS DRAWING ISSUED FOR

PERMIT PROJECT NO.

16 DETAIL- WALL TO WOOD DOOR JAMB A-200 3" = 1'-0"

17 DETAIL- WOOD JAMB TO FRAMED GLAZING A-200 3" = 1'-0"

18 DETAIL- FRAMED GLAZING TO WALL A-200 3" = 1'-0"

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-603

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

FINISHES GENERAL NOTES:

6.

7.

8.

9.

10.

11.

6&+('8/(

FLOORING

ITEM

CARPET

CARPET TILE

CARPET TILE

CARPET TILE

CARPET TILE

PORCELAIN TILE

01 FINISHES PLAN A-800 1/8"=1'0"

PORCELAIN TILE PORCELAIN TILE

DESCRIPTION

C1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

C1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

C2

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

C3

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

C4

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

C5

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T2

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T3

VINYL COMPOSITION F2 TILE

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

RUBBER BASE B1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

CUT TILE

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T1

WALL TILE

T4

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

PAINT

P1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. COLOUR: TBD

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CARPET TILE

PREFERRED DESIGNATION

FLOORING

5.

BASE

2.

3.

4.

REFER TO REFLECTED CEILING PLAN FOR PAINT FINISHES FOR BULKHEADS AND DRYWALL CEILINGS. ALL FLOORING TRANSITIONS ARE TO OCCUR AT THE CENTERLINE OF THE DOOR. ALL FLOORING TRANSITIONS ARE TO HAVE A SCHLUTER STRIP. ENSURE ALL FLOOR TRANSITIONS ARE LEVEL, FEATHER BACK SUBSTRATE TO ENSURE SMOOTH TRANSITION. WHEN INSTALLING FLOOR TILE, ENSURE THAT PERIMETER PIECES ARE NOT LESS THAN 50% OF THE LENGTH OR WIDTH. WHEN INSTALLING CARPET TILE, ENSURE THAT PERIMETER PIECES ARE NOT LESS THAN 50% OF THE LENGTH OR WIDTH. ALL WALLS TO BE PAINTED P1 UNLESS OTHERWISE NOTED. ALL GWB CEILING TO BE PAINTED P1 UNLESS OTHERWISE NOTED. ALL FLOORING TO BE F1 UNLESS OTHERWISE NOTED. ALL BASE TO BE B1 UNLESS OTHERWISE NOTED. LOWER CABINETS ARE TO BE INSTALLED PRIOR TO FLOORING.

PERMIT STAMP

PAINT WALL FINISH

1.

WALL COVERING

WALL TILE

WALL TILE

P2

I. MANUFACTURER: TBD II. PRODUCT: TBD III. COLOUR: TBD

WC1

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T4

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

T5

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME.

I. MANUFACTURER: TBD II. PRODUCT: TBD III. SIZE: TBD IV. COLOUR: TBD V. INSTALLATION: TBD

THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA

/(*(1' SYMBOL

DESCRIPTION INDICATES ANY FINISH

PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

INDICATES EXTENT OF A FINISH INDICATES DIRECTION OF A FINISH

FINISHES PLAN DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-700

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

FURNITURE GENERAL NOTES: 1.

2.

FURNITURE SHOWN FOR COORDINATION PURPOSES ONLY. ALL FILING/FULL HEIGHT FURNITURE MUST BE SEISMICALLY BRACED.

)

)

)

)

)

)

)

) )

)

)

)

)

)

)

)

)

)

)

)

)

)

)

)

);;

)

)

)851,785( &2'(

)

)

)

'(6&5,37,21

)

)

)

)

6<0%2/

)

)

)

)

)

) )

/(*(1'

)

)

)

) )

)

)

)

)

)

)

)

)

)

)

)

)

)

)

)

)

SO REVIEW

CONSULTANT

PRODUCED BY AN AUTODESK STUDENT VERSION

) )

)

PERMIT STAMP

)

)

(4

)

)

)

)

)

)

)

(4

)

(4

)

)

) )

)

) )

)

)

)

) )

)

)

)

) (4

)

)

)

)

)

)

)

SEAL

) ) ) )

) )

)

)

)

)

DISCLAIMER

01 FURNITURE PLAN A-800 1/8"=1'0"

THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

FURNITURE PLAN DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-800

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

)

)

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

'225 6&+('8/(

FRAME

HARDWARE

OPEN ID

ROOM NAME

TYPE

W X H X THICKNESS

MTL

FINISH

GLASS

TYPE

MTL

FINISH

FIRE RATING

HINGE

LATCH/ LOCKSET

DOOR GASKET

STOP

CLOSER

COAT HOOK

D100

RECEPTION

-

-

-

-

-

-

-

-

-

-

-

H9

-

H10

-

D103

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D104

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D105

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D106

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D108

CORRIDOR 108

1

36" X 96" X 134"

S

P1

-

2

P5

P1

1 HR

H1

H7

-

H13

H10

-

--

D109

STORAGE & UTILITY ROOM

1

36" X 96" X 134"

WD

P1

-

1

WD

P1

-

H1

H4

-

H13

H10

-

--

D110

WOMEN'S WASHROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H8

-

-

H10

-

--

D110A

WOMEN'S WATER CLOSET

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

D110B

WOMEN'S WATER CLOSET

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

D110C

WOMEN'S WATER CLOSET

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

D110D

WOMEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D110E

WOMEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D110F

WOMEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D111

MEN'S WASHROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H8

-

-

H10

-

--

D111A

MEN'S WATER CLOSET

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

-

NOTES

EXISTING DOOR

D111B

MEN'S WATER CLOSET

1

36" X 84" X 134"

D111C

MEN'S WATER CLOSET

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

H15

--

D111D

MEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D111E

MEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D111F

MEN'S SHOWER

1

36" X 84" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H6

-

-

-

-

--

D112

GUEST LOUNGE

2

2 (36" X 96" X 124")

WD

CLR

Y

1

WD

CLR

-

H1

H8

-

H13

H10

-

STOP ON FLOOR AT WALL

D114

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D115

TREATMENT ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

H1

H6

-

H13

-

H15

--

D116 D117 D120A

OFFICE RECEPTION MEETING ROOM 117 MEETING ROOM 120

4 3

2 (36" X 96" X 12MM) 2 (36" X 96" X 12MM)

G G

-

Y Y

-

-

-

-

-

-

H3 H2

H8 H8

-

-

H11 -

-

GLAZING FILM, REFER TO A-200

-

GLAZING FILM, REFER TO A-200 GLAZING FILM, REFER TO A-200

3

36" X 96" X 134"

WD

CLR

Y

1

WD

CLR

-

H1

H4

-

H13

-

-

--

G

-

Y

-

-

-

-

H2

H8

-

-

-

-

D120B

MEETING ROOM 120

2

36" X 96" X 134"

D121

COPY ROOM

2

36" X 96" X 134"

WD

CLR

Y

1

WD

CLR

-

H1

H4

-

H13

-

-

--

D122

CORRIDOR 122

1

36" X 96 X 134"

S

P1

-

2

PS

P1

1 HR

H1

H7

-

H13

H11

-

ON CARD ACCESS

D123

MEETING ROOM 123

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H4

-

H13

-

H15

--

D124

PRIVATE OFFICE

1

36" X 96" X 134"

WD

CLR

1

WD

CLR

-

H1

H4

-

H13

H15

--

D125

PRIVATE OFFICE

1

36" X 96" X 134"

WD

CLR

1

WD

CLR

-

H1

H4

-

H13

H15

--

D126

PRIVATE OFFICE

1

36" X 96" X 134"

WD

CLR

1

WD

CLR

-

H1

H4

-

H13

H15

--

D127

PRIVATE OFFICE

1

36" X 96" X 134"

WD

CLR

1

WD

CLR

-

H1

H4

-

H13

H15

--

D128

PRIVATE OFFICE

1

36" X 96" X 134"

WD

CLR

1

WD

CLR

-

H1

H4

-

H13

H15

--

D129

STAFF ROOM

1

36" X 96" X 134"

WD

CLR

-

1

WD

CLR

-

H1

H4

-

H13

H11

-

--

D130A

FILE ROOM

1

36" X 96" X 134"

WD

P1

-

1

WD

P1

-

H1

H5

-

H13

-

-

--

1

36" X 96" X 134"

WD

P1

-

1

WD

P1

-

H1

H5

-

H13

-

-

--

FILE ROOM

-

SO REVIEW

CONSULTANT

PERMIT STAMP

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DOORS AND HARDWARES DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-900

PRODUCED BY AN AUTODESK STUDENT VERSION

D130B

-

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

DOOR

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION

7<3(

7<3(

7<3(

7<3(

7<3(

01 DOOR & FRAME TYPES A-200 1/4"=1'0"

R1 20-01-24 PERMIT WN REV YY-MM-DD DWG ISSUED DRAWN

SO REVIEW

PRODUCED BY AN AUTODESK STUDENT VERSION

PRODUCED BY AN AUTODESK STUDENT VERSION

CONSULTANT

PERMIT STAMP

SEAL

DISCLAIMER THIS DRAWING, AS AN INSTRUMENT OF SERVICE IS THE PROPERTY OF LASALLE DESIGN STUDIO, THE COPYRIGHT IN THE SAME BEING RESERVED TO THEM. NO REPRODUCTION IS ALLOWED WITHOUT THE PERMISSION OF LASALLE DESIGN STUDIO AND WHEN MADE MUST BEAR ITS NAME. THIS DRAWING IS NOT TO BE SCALED. THE CONTRACTOR IS TO VERIFY DIMENSIONS AND DATA NOTED HEREIN WITH THE CONDITIONS ON SITE AND IS RESPONSIBLE FOR REPORTING ANY DISCREPANCY TO LASALLE DESIGN STUDIO FOR ADJUSTMENT.

PROJECT

URBAN OASIS SPA PROJECT ADDRESS

1015 BURRARD STREET VANCOUVER, BC V6Z 1Y5 DRAWING TITLE

DOORS AND HARDWARES DRAWING ISSUED FOR

PERMIT PROJECT NO.

ID440

PLOT DATE

03/20/2020 SCALE

AS SPECIFIED

DRAWING NO.

A-901

REVISION

R1

PRODUCED BY AN AUTODESK STUDENT VERSION