HOW SHOULD THE ROMAN BLINDS BE FIT?
ModernWindowCoveringsAndHowTo MaintainThem
FittingRomanBlindsisdependedon whethertheyarebeinghangedonan interiororexteriormount. Thegeneralprocessissimpleand similar.
First,thefixingsshouldbemeasured andmarked.Next,usingscrews,the bracketsaretobeinstalled.
Afterthat,theblindshavetobefitted easilyintothebracketsand “snapped”intoplace.
WestcoastBlindsWAistheidealstore inPerthtobuyRomanBlinds.After purchasing,thesetipswillhelpin hangingRomanBlinds.
Here are the steps and tips.
Decide Where Should The Roman Blinds Be Hanged
First,decidetheplacement–whether insideoroutsidethewindowrecess. (Placinginsideismoreelegant,but sufficientspaceshouldbeavailable fortopfittings. Buttheoutsideplacementcreatesan illusionoflargerwindows.)
Readtheinstructionstohangthe RomanBlinds–therearespecial stepsforthesewindowtreatments. So,havetheactivitytoolswithinyour reach.
1.
Remember a few important points before hanging the Roman Blinds.
Read the manufacturers' instructions about the blinds' special headings.
The Roman Blinds with Velcro-type headings cover 1 - 2 inches of the blinds at the top. Measure the fastening from the blinds' top which will be covered to a few millimetres rightabovethewindowsill.
2. On either or both sides of the Roman Blinds, leave a few millimetres of space for ventilationpurposes.Else,thewindowscould haveunwantedcondensation.
3. To stop light from filling the room, they place the Roman Blinds outside the recess; for a night nursery or in a dark room. Make sure,thewindowframecanbeartheRoman Blinds'weight.
4. If you have a deep window frame or window sill, then place the blinds inside the recess.
Step 2 – How To Hang With An Interior Mount?
Check the Window Frame
The interior of the window frame should be level and determine it usingalevel.Ifuneven,thenattach asmallshimontheceiling.
Check the Roman Blinds Against the Window Frame
After unpackaging the Roman Blinds, keep them bunched up. Holdthemtillwheretheyshouldbe hanged on inside the window frame.
Mark the Roman Blinds
Using a carpenter's pencil on the windowframe,markthelocationof the Roman Blinds. Mark the brackets on the shades. Keep 3 inches of space from each side of the shade. Then set the Roman Blindsaside.
Get the Brackets Installed
Use the screws and install the brackets. Line up the brackets with the window frame’s edge, and match the screws within the holes of the brackets before screwing themtotheirplace.
Have the Roman Blinds Installed
Click the brackets in their place, and slide the top forward of the blinds for snapping the brackets. After that secure the Roman Blinds to the window frame. Adjust the shades to test the fit – pull on the cord or drawstring. Use a child safety lock-away wand for reducing accident risks when the Roman Blinds are installed in the children'sorsickpeople'srooms.
Definitely check the installed Roman Blinds are operating well and looking good.
How To Hang With An Exterior Mount?
Thebasicinstallationstepsasinthe interior mount are the same for the exteriormount.
The Roman Blinds should be sufficiently large for covering the window entirely with only 4 – 8 inchesofspaceonallfoursides.
The fitting should be just right with the wall above the window and windowsills,thatistheradiator.
