WTIA Weld Connect May 2016

WELD CONNECT WELDING TECHNOLOGY INSTITUTE OF AUSTRALIA

MAY 2016

Welding Technology Institute of Australia

WTIA Newsletter May 2016

| Page 1

CONTENTS 03 04 05 06 07 08 10 12 14 15

WTIA CEO Update Victoria Division News New South Wales Division News South Australia Division News Western Australia Division News Queensland Division News National Certification Register National Manufacturing Week Upcoming Events IIW Assembly & Conference

WTIA CONTACTS WTIA NATIONAL OFFICE Building 3, Level 3, Suite 5 20 Bridge Street Pymble, NSW 2073 (PO Box 197 Macquarie Park BC, NSW 1670) T: +61 (0)2 8748 0100 E: info@wtia.com.au CHIEF EXECUTIVE OFFICER Geoff Crittenden T: +61 (0)2 8748 0100 E: g.crittenden@wtia.com.au

CHIEF TECHNOLOGY OFFICER Bruce Ham T: +61 (0)418 391 534 E: b.ham@wtia.com.au

MEMBERSHIP MANAGER Donna South T: +61 (0)2 8748 0130 E: d.south@wtia.com.au

QUALIFICATION & CERTIFICATION MANAGER Annette Dickerson T: +61 (0)2 8748 0170 E: a.dickerson@wtia.com.au

ADVERTISING Bill Aitken T: +61 (0)2 8748 0123 E: b.aitken@wtia.com.au

TRAINING MANAGER Paul James T: +61 (0)2 8748 0150 E: p.james@wtia.com.au

EDITORIAL Sally Wood T: +61 (0)434 442 687 E: sally@wordly.com.au WTIA Newsletter May 2016

| Page 2

WTIA CEO UPDATE With the Government recently announcing the construction of submarines, future frigates and offshore navy patrol boats from 2018, the Australian shipbuilding industry has been in the spotlight. Over the last month, the WTIA has been working with some of the shipbuilding industry’s largest players.

The May meeting of the Defence Shipbuilding SMART Industry Group brought together some of the key industry players, including ASC, Bisalloy, Civmec, DSTG, DMTC, and ATTAR. The purpose of the meeting was to look at some of the issues related to delivering on the Commonwealth’s extremely ambitious ship building program, including: • Defence workforce planning and welding training, particularly the ability of the Australian shipbuilding industry to deliver a sufficient number of qualified and certified welders to deliver projects.

• Broader industry capability to deliver future shipbuilding projects, specifically how to facilitate technology transfer to benefit the wider industrial sector.

• Research and development capabilities, which will be required to meet future needs and technological advancements.

and highlight any gaps that may need to be addressed.

WELDING EQUIPMENT COMPLIANCE SCHEME Along with Peter Kuebler Following the Defence from BOC, I also met with Shipbuilding SMART Industry Brian Richardson this month, Group meeting, I met with the the Director of Electrical Commonwealth’s Shipbuilding Equipment Safety and Taskforce. I presented the Licensing for Queensland. We findings of the SMART Group, discussed issues related to and outlined our plans for industrial welding equipment delivering the various defence that fails to meet appropriate industry projects. After outlining Australian and International their top-line strategy, the standards.

Taskforce requested that the WTIA is more involved in future We agreed to work in strategic planning. partnership to develop a I also met with the senior welding supervisor and senior project engineers from ASC’s Surface Ship Building team.

After discussing workforce planning, training, and technology transfer, I visited their shipyard to gain firsthand understanding of the issues ASC is facing in the construction of the air warfare destroyer.

compliance scheme, which will be managed by the WTIA. This scheme will ensure that all industrial welding equipment complies with all relevant standards and codes.

Geoff Crittenden WTIA CEO

Air Warfare Destroyer at ASC.

In addition, we looked at opportunities to compile a welding capability statement that will encompass welder qualification and certification, industry capability, research and development capability, WTIA WTIANewsletter NewsletterMay May2016 2016 | | Page Page3 3

VICTORIA DIVISION NEWS

R

obert Wiseman recently presented a lecture to members of the Victoria Division on the effects of Boron in steels, and why Boron is added to some structural steels.

In his presentation, Robert explained the role of boron in steel and welding consumables, what to look for in the chemical analysis in the mill or batch certificate, and how to adjust the welding procedure.

This topic is particularly relevant given that over the last year, it has become increasingly clear that low and medium strength structural steels containing undisclosed amounts of boron are being imported into Australia.

An alloying element used to increase the hardenability and strength of steels, the presence of boron necessitates that appropriate use of preheat and heat input controls, and welding consumable selection.

Disclosure of boron levels in steel is important—fabricators need to know what to look for, how to assess whether the steel is fit for purpose, and how to adjust welding procedures.

WELDING COMPETITION The Victoria Division recently hosted a welder competition, with 12 welders participating.

The competitors were expected to weld test plates in pipe, plate and a non ferrous GTA weld, all within three, hours to nominated welding procedures.

Paul McVicar (National Sales Manager, Kemppi Australia) presents first prize to Trevor Noble.

The standard of welding was extremely high, as graded by prominent industry inspectors, Kevin Wooden, Stewart Martin and Warren Spooner.

Our congratulations to Trevor Noble, who took out first place, Daniel Burcombe, who came second, and third placed Jessie Smolemaars.

The Victorian Committee would like to thank the sponsors of the Welding Competition, including Kemppi Australia, Dandy Gas, IWS, Uneek Bending and Chisholm Institute of TAFE. Without the support of our sponsors, the event would not have been possible.

Robert Vernon presents second place to Daniel Burcombe.

Robert Vernon presents third place to Jessie Smolemaars.

VIC CONTACT Robert Vernon Coordinator 0487 400 002 robvernon@bigpond.com

L to R: Welding competition competitors; Jess Garland, Andrew Kallitsis, Daniel Barry, Frank Harvey, Blake McDonald, John Harrison, Trevor Noble, Alan Pump, Jessie Smolenaars, Christopher Round, Ray Douma, and Daniel Burcombe.

WTIA Newsletter May 2016

| Page 4

NSW DIVISION NEWS The WTIA is aiming to develop a stronger skills base for the Australian steel industry through a partnership with TAFE NSW. The two organisations have signed a memorandum of understanding (MoU), with WTIA CEO Geoff Crittenden working to implement similar agreements with other TAFEs across the nation.

WTIA will work with TAFE NSW to get a consistent standard of welding training, certified to ISO 9606, and pre-TAFE training to help school leavers understand vocational training.

WTIA will launch a National Welder Qualification Register this year, which will name all welders who have achieved accreditation to ISO 9606-1:2012, which specifies qualification testing requirements.

The international standard provides technical rules for a systematic qualification test for welders so their qualifications can be uniformly accepted.

Mr Crittenden said welders currently had qualifications ratified on a per-project basis which was costly and inefficient.

In association with TAFE NSW, WTIA will spearhead reinstating

the trade of welder to the TAFE syllabus, instead of alternative light or heavy fabrication worker categories, and training will be conducted in line with ISO 9606.

“The new register will set the benchmark and the MoU with TAFE NSW will see uniformity across the nation in welder qualifications,” Mr Crittenden said.

Lucy Arundell, TAFE NSW Illawarra’s Institute Director, and Mr Crittenden signed the MoU on 2 May. “The partnership comes at an important time for the country’s steel industry, as WTIA continues to advocate for introducing legislation ensuring all imported fabricated steel complies with Australian Welding Standards,” Mr Crittenden said.

“A strong, vibrant steel industry

Geoff Crittenden (WTIA CEO) and Lucy Arundell (TAFE NSW Illawarra’s Institute Director) sign a MoU.

is critical to the future of Australian industry. Arrium’s 7,000 direct employees are just the tip of the iceberg; there are more than 14,000 Australians employed in related jobs.”

He said the MoU would ensure training was more industry focused in future.

Ms Arundell said: “WTIA will externally validate our processes and assessments to ensure TAFE NSW’s training is aligned with the needs of industry and upholds the highest possible safety standards. Together, TAFE NSW and WTIA will strive to secure the future of the Australian welding industry by producing highly skilled, qualified welding professionals.”

NSW CONTACT Bill Aitken State Coordinator NSW b.aitken@wtia.com.au or 0477 010 290 L to R: S+L Steel’s Madeleine Glendenning Du Toit,Facilities.

Geoff Crittenden, Lucy Arundell, Daniel Severino, and Pete Buttenshaw.

WTIA Newsletter May 2016

| Page 5

SA DIVISION NEWS The South Australia Division recently facilitated a highly interesting and informative technical presentation by Bisalloy Steels, on the topic of ‘Exploring the Applications of Quenched and Tempered Steels’.

Bisalloy Steels is Australia’s only manufacturer of highstrength and abrasion-resistant quenched and tempered steel plate, under the brand name of BISPLATE®.

Located on a 23,600m2 site in Unanderra, south of Sydney, Bisalloy Steels manufactures these products through a highly efficient, continuous flow process. Distribution is through a network of distributors across Australia, directly to end users, through its businesses in Indonesia, Thailand, the People’s Republic of China and through agents in at least a dozen countries worldwide.

Presenting on behalf of Bisalloy Steels was Roben Alternetti and Justin Suwart.

Together, Roben and Justin provided an insight into how BISPLATE® can be applied to industries such as mining, structural, engineering and defence.

The increased strength of BISPLATE® structural grades means engineers and architects can design and write specifications for structures.

BISPLATE® makes it possible to build taller towers, span larger rooms, and specify smaller columns, all while actually reducing the amount of steel needed. Reductions in

L to R: Justin Suwart (Bisalloy), Michael Harvey Paolo(Cigweld), Corronca,Geoff WTIACrittenden Technology (WTIA), and Roben Alternetti (Bisalloy).

Manager, based in South Australia.

Justin Suwart (Bisalloy) presents at the recent WTIA SA Branch meeting.

frame weight leads to savings on foundations, fabrication and construction costs.

well-attended, and the presentations were highly interesting and informative.

The benefits of BISPLATE® reach far beyond the construction site. Equipment such as dump truck bodies, storage bins, hoppers and chutes can be manufactured with an overall lighter weight whilst still maintaining the same strength.

We would like to thank the event sponsors, Bisalloy Steel, Cigweld and Coregas— without the generosity of these companies, it would be very difficult to run these events.

The event was extremely

SA CONTACT Paul Bettison Chairman

Bettisoneng@optusnet.com.au WTIA Newsletter May 2016

| Page 6

WA DIVISION NEWS

T

he WTIA was delighted to be involved in a recent Industry Evening at South Metropolitan TAFE, designed to improve TAFE-industry cooperation and collaboration.

South Metropolitan TAFE (formerly Polytechnic West TAFE) held an Industry Evening in late April at its Thornlie Campus. Louise Petrick, as the WTIA Western Australia Technology Manager, was invited to provide an introductory presentation about the WTIA.

Louise’s presentation highlighted many of the important projects on which the WTIA is currently working, and generated some lively discussions around AS/NZS 1554.1:2014.

The National Welder Database garnered a considerable amount of interest, particularly

in relation to welder qualifications with respect to ISO 9606-1, AS 2980 and AS/NZS 1554.1.

Discussions were also quite lively in relation to prequalified and non-prequalified material, boron content and the responsibility of the manufacturer with respect to the materials certificate, as amended by Standards Australia after the publication of the 2014 version of AS/NZS 1554.1.

by the TAFE. A wide range of skills were on display, everything from hobby gas welding, to structural and pipe arc welding.

Of particular interest was a group project where each student was responsible for a part of the fabrication. They had to work together to ensure that each individual part met the specification and tolerance requirements so that the final assembly passed.

Peter Andrews, the Head The influence of a boron of Programs at South content of 0.008% or higher Metropolitan TAFE, was on the materials properties, very happy with the Industry and the requirements for Evening. He said that while a procedure qualifications were large restructure is happing briefly discussed. An additional within the Western Australia presentation was requested with TAFE system at the moment, more detail by the audience. more events like these would be held in future to expand The evening also showcased TAFE-industry cooperation and projects that have been involvement. completed by students attending South Metropolitan TAFE. These projects enabled WA CONTACT industry representatives to Clay Williams review and comment on WTIA WA Division Chairman the direction and content of clay@weld-rite.com.au training currently provided

Thornlie Campus at South Metropolitan TAFE. Image courtesy of South Metropolitan TAFE.

WTIA Newsletter May 2016

| Page 7

QLD DIVISION NEWS The May meeting of the Queensland Division featured an informative presentation on Adaptive Robotic Welding and Cutting.

Peter Kuebler of BOC spoke about world leading Australian innovation in the field of robotic applications, including welding and plasma cutting applications.

With rapid advancements in this area over the last few years and Australian innovations, robot-based automation is tackling large and complex structures with minimal tooling and programming. This enables fabricators and manufacturers to weld and cut small runs of components more efficiently and keep jobs in Australia.

Peter provided in-depth insights into the adaptive robotics technology that is currently available. His presentation was extremely well received, being very informative and engaging.

A professional welding engineer and metallurgist, Peter has over 35 years experience in the construction, fabrication and welding products industries.

QLD CONTACT Warren Raisin Chairman warren@aitkenwelding.com

Queensland Division members at the recent WTIA branch meeting.

L to R: Greg Gavriniotis, Warren Raisin, Wayne Thompson, and Peter Kuebler.

He is a qualified International Welding Engineer and has a degree in metallurgy from RMIT. Peter has held management, technical and consulting positions with a wide range of companies, and is currently employed by BOC as Key Customer Technical Solutions Engineer.

In this role, he is responsible for co-ordinating technical support for BOC’s largest customers as well as marketing of welding automation equipment.

BOC is a member of The Linde Group which supplies

compressed and bulk gases, chemicals and equipment around the globe.

The company develops safe, sustainable and innovative solutions for customers in many specialty sectors, heavy industry and medical environments. BOC is a WTIA Premium Corporate Member.

We’d like to take this opportunity to thank our event sponsor, Aitken Welding.

Without sponsors, branch events like these would simply not be possible.

WTIA Newsletter May 2016

| Page 8

WTIA Newsletter May 2016

| Page 9

CERTIFICATION REGISTER The WTIA has commenced work on the establishment of a National Welder Certification Register. The Register will initially allow welders, who enrol with the WTIA and qualify to AS/NZS 2980 (Qualification of welders for fusion welding of steels), to register their qualifications, providing recognition throughout Australia and New Zealand. Recognition will not be limited to the welder’s current employer.

The Register will be beneficial to self employed welders, welders employed by body hire companies providing breakdown and maintenance services, and welders working on government infrastructure projects.

Fabrication and construction companies, project managers, inspection agencies and government agencies will also be able to query the register to verify the status and extent of a welder’s qualifications, simplifying project management requirements and validating qualifications and experience prior to employment.

The opportunity will also be provided to suitably qualified welding supervisors, inspectors, trainers and welding engineers to qualify and register as approved examiners.

BASIS OF THE REGISTER The Register is being designed to meet the requirements of ISO 9606-1:2012 Qualification testing of welders — Fusion welding — Part 1: Steels.

Compliance with ISO 9606-1 provides for the realisation of multiple benefits by welders and enquirers alike including: • A common method of welder qualification whilst utilising acceptance criteria associated with specific contract requirements.

• Evaluation of welders following a qualified weld procedure. The WPS may be either a standard procedure provided by the WTIA or any specific WPS nominated by the welder’s employer.

• Functionality similar to, and consistent with, AS/NZS 2980 providing familiarity to users.

AS/NZS 2980 Qualification of welders for fusion welding of steels when published in 2007, was drafted taking cognisance of the then ISO 9606-1 and its proposed revisions at the time of publication. It is also consistent with weld acceptance criteria utilised within AS/NZS 1554.1 (category SP) and AWS D1.1.

The WTIA has submitted an application to Standards Australia to adopt ISO 9606-1 as an AS/NZS standard whilst incorporating local appendices which will facilitate its adoption and provide for welders wishing to retain qualifications to AS/NZS 2980.

PROCESS Welders will initially register with the WTIA. A WTIA appointed examiner will then organise the practical assessment at a mutually

WTIA WTIANewsletter NewsletterMay May2016 2016 | | Page Page1010

CERTIFICATION REGISTER

agreeable time and place, such as a training facility or fabricators workshop.

The examiner will then visually assess the welded test pieces prior to either destructive testing or submission to a suitable NATA registered laboratory for non destructive examination, as appropriate.

An optional theoretical component consistent with both AS 1796 requirements and the International Institute of Welding’s IWP will also be available. Once a welder has qualified, a certificate will be made available which will require a confirmation endorsement every six months, consistent with requirements for AS/NZS 2980.

After two years, two welds produced by the welder in the preceding six months are evaluated by the examiner to revalidate the welder’s qualification for a further two years. This process is referred to as prolongation within AS/NZS 2980. Revalidation may utilise production welds in lieu of additional testing.

EXPRESSIONS OF INTEREST Expressions of interest are now sought from personnel and organisations for the following roles: Examiner, Examining Centre, and Testing Centre.

REQUIREMENTS 1. Examiners Examiners with the following qualifications and experience are encouraged to apply: a. IIW certified IWS, IWT or IWE; b. WTIA certified structural steel (AS 2214) or pressure equipment (AS 1796-10) welding supervisors; c. WTIA certified inspectors at the standard or comprehensive level.

Personnel with alternative qualifications will be considered by application.

Examiners will need to be familiar with both AS/NZS 2980 and ISO 9606-1; and will be required to conduct visual examinations. Approved examiners may be able to conduct limited destructive tests.

Approved examiners should

have access to calibrated external metering suitable to confirm welding conditions specified on the WPS. 2. Welding and Examination Centres Private training centres and TAFEs with facilities suitable for training and practical weld assessments are encouraged to apply. Approved centres should have access to calibrated external metering suitable to confirm welding conditions specified on the WPS. Weld testing will also be available within fabricators workshops upon request.

3. Testing Centres Laboratories with NATA endorsement to conduct ultrasonic, radiographic, and destructive tests such as macro tests, bend tests and fracture (nick break and fillet break) tests are encouraged to apply.

TIMING It is currently anticipated that the database will be available during the middle of 2016. In the interim, expressions of interest should be emailed to the WTIA at info@wtia.com.au.

WTIA Newsletter May 2016

| Page 11

NATIONAL MANUFACTURING WEEK National Manufacturing Week (NMW) ended on a solid footing last Friday.

NMW’s standout Welding Technology Product Zone included Kemppi, Fein, Innovative Welding, Ensitech, Klingspor, Metal Science Technologies, Weldbrush and more showcasing developments in welding technology.

This year’s NMW (held from May 11 to 13 in Sydney) ended on a solid footing, with more than 200 exhibiting companies, 50 speakers and over 5,000 visits by attendees creating a buzz at the combined NMWSafety First Conference and Expo event. Feedback to organisers Reed Exhibitions is that participants have gained new insights, information and all-important inspiration for growth.

The Welding Technology Product Zone was a standout at NMW: showcasing innovations from welding’s leading names, including Kemppi, Fein, Innovative Welding, Ensitech, Klingspor, Metal Science Technologies, Weldbrush and more who were

inviting industry to see the latest developments in welding technology.

Ensitech, the inventor and manufacturer of the TIG Brush system presented - for the first time - a unique fluid delivery system that puts an end to ‘dipping’ processes for stainless steel weld cleaning and passivation. Ensitech’s Esther Sokoya said, “This new system is clean, efficient and effective: and judging by the feedback we received at NMW, it’s a very welcome development.”

Also exhibiting in NMW’s Welding Technology zone was Fein & Tyrolit, providing rolling demonstrations of the company’s advances in metal

polishing equipment and techniques.

Kemppi also took a major presence at the event, demonstrating its latest technologies and solutions.

Kemppi’s Regional Sales Manager, David Coleman said, “We were on our feet all day from day one: showing customers our entire range, especially our Pulse FastMig and our new automation products. Kemppi brought a wide range of products to NMW, from basic machines to the latest solutions, to show industry the latest technology in action.”

WTIA Newsletter May 2016

| Page 12

NATIONAL MANUFACTURING WEEK NMW Exhibition Director, Robby Clark commented that NMW, as the only event that brings different sectors of industry together under one roof, has once again helped create real opportunities for participants.

“There is a great deal of strength in Australia’s manufacturing sector. The feedback from exhibitors is that visitors are looking keenly at opportunities to transform and expand their capabilities: an observation that is supported by strong attendance at our NMW Seminar Theatre events, which gave businesses opportunities to collect new information and ideas for growth.”

“There was a real buzz across NMW 2016, which I

am sure will translate into real opportunities in the weeks and months ahead,” Clark said.

Reed Exhibitions has announced that NMW 2017 will take place in Melbourne from 9 to 12 May 2017. NMW 2017 will be co-located with Austech and the Safety First Conference & Expo, as well as AUSCLEAN Pulire, the leading event for Australasia’s cleaning industry. The combination of all three events, running together, will draw together the broadest cross-section of industry.

Many of industry’s leading players have already booked exhibition space at NMW 2017. For more information about participating, contact stephen.cuff@reedexhibitions. com.au or visit www. nationalmanufacturingweek. com.au.

WTIA Newsletter May 2016

| Page 13

UPCOMING EVENTS

W

hether you need to brush up on skills acquired years ago, or want to try your hand at something new, there’s sure to be an event for you. For further details on any of the events or examinations listed below, contact events@wtia.com.au or +61 (0)2 8748 0100.

MAY 2016 Oil & Gas Essentials Course Adelaide, 25 and 26 May This course provides a basic understanding of the Australian oil & gas industry. Designed to give participants (including current or potential suppliers to the petroleum industry) a thorough understanding of how the sector works, the two day course covers a range of geological, commercial and technical information in nontechnical language.

Taught within the industry’s global environment, the South Australian and national context is also covered. Participants will experience an introduction to field based operations in the new Onshore Petroleum Centre of Excellence (OPCE) simulated training environment and come away with an

excellent general knowledge of a complex industry.

The total cost is $995 plus GST per person for the two day course. SACOME members will be reimbursed $250 total per person.

For further details, or to register, visit the TAFE SA website.

JULY 2016 69th IIW Annual Assembly and International Conference 2016 Melbourne, 10 to 15 July With the theme of ‘From Concept to Decommissioning: the Total Lifecycle of Welded Parts’, the 2016 IIW Assembly and Conference will be the premier welding event for the year, including expert speakers, technical visits, and a full social program. For more information, visit: www.iiw2016 com

WTIA & IIW EXAM DATES IIW International Welding Inspector Basic (IWI B), leading to WTIA Certified Welding Inspector (CWI): • 26 August 2016 IIW International Welding Inspector Standard (IWI S), leading to WTIA Certified Senior Welding Inspector (CSWI): • 2 June 2016 • 3 November 2016 IIW International Welding Specialist (IWS) and WTIA Welding Supervisor AS 1796 & AS 2214 Theory papers: • 25 May 2016 • 9 November 2016 Welding Supervisor – AS 1796 Certificate 10 and/or & AS 2214 Codes: • 25 May 2016 • 9 November 2016 WTIA Certified Quality Control Welding Coordinator (CQCWC): examinations arranged according to training schedule.

For information on training, email training@wtia.com.au.

For information on exams, visit www.wtiacertification.com.au

WTIA Newsletter May 2016

| Page 14

IIW ASSEMBLY & CONFERENCE

T

he WTIA is honoured to host the 69th IIW Annual Assembly & International Conference in Melbourne from 10 to 15 July 2016, the premier event for the global welding and fabricating industry.

TECHNICAL VISITS Technical visits have been arranged for delegates to experience and see first hand what is happening within the industry in Melbourne.

MONDAY 11 JULY Brookfield Multiplex Departure Time: 9.30am Return Time: 12:30pm Brookfield Multiplex’s inhouse Architectural Physicist, Professor James MurrayParkes will present on how bio mimicry has influenced welded structural connection design.

This unique presentation will attempt to outline where the inspiration for some of James’ more innovative designs stem from and will detail the

application to live projects, including new innovative high load welded connections.

Bombardier Departure Time: 11.30am Return Time: 2:30pm As the world’s leading manufacturer of both planes and trains, we’ve built an extensive and diverse portfolio of winning mobility solutions.

Everywhere people travel by land and in the air, a Bombardier product is ready to transport them. From categorydefining business jets and commercial aircraft designed for the challenges of today, to sleek high speed trains and public transit that’s smarter than ever.

But it’s not just our products and services that make us a global leader. The most important success factor is our employees, all 74,000 of them.

Together we’re focused on making mobility more efficient, sustainable and inviting than ever before. We call it The Evolution of Mobility.

Melbourne Cricket Ground (MCG) and National Sports Museum Tour Departure time: 1:30pm Return time: 4:30pm One of the world’s most iconic stadiums, the MCG is located just minutes from the CBD. Traditionally, the MCG has provided live drama to thrill millions worldwide.

Memorable events such as the Olympic Games, test cricket and Australian football’s incomparable Grand Final on the last Saturday in September have all taken place at Melbourne’s home of sport.

A guided tour is the only opportunity to get an exclusive, behind the scenes peek of one of the world’s most iconic sports stadiums and visit the National Sports Museum.

The Melbourne Cricket Ground (MCG).

WTIA Newsletter May 2016

| Page 15

IIW ASSEMBLY & CONFERENCE TUESDAY 12 JULY RMIT - Advanced Manufacturing Precinct Departure time: 9:30am Return time: 12:00pm Housing some of the most advanced manufacturing technologies available, the Advanced Manufacturing Precinct’s vision is to be the leader in the implementation of the next wave of manufacturing in Australia.

In RMIT’s one stop shop for all additive and subtractive requirements and reverse engineering needs, visitors will be able to experience innovation in the form of 3D printers, 3,4&5 axis CNC machines and laser scanning equipment that allow to manufacture or capture even the most complex of designs.

Swinburne University – Advanced Manufacturing and Design Centre Departure time: 9:30am Return time: 12:30pm The Advanced Manufacturing and Design Centre (AMDC) is a state-of-the-art facility that gives researchers and students the opportunity to use the latest manufacturing and design techniques and technologies. Opened at Swinburne’s Hawthorn campus in 2014, the centre is a hub for researchers carrying out worldleading research, education and training.

RMIT’s Advanced Manufacturing Precinct.

The AMDC shares its equipment, knowledge and commercial outcomes. This collaborative approach is building strong links across the higher education, research, vocational training and manufacturing sectors, and will enhance Australia’s ability to develop an internationally competitive, highly productive and technologically advanced manufacturing sector.

WEDNESDAY 13 JULY CSIRO Manufacturing & the Australian Synchrotron Departure time: 8:30am Return time: 3:30pm CSIRO’s Lab 22 Here is your chance to visit CSIRO’s Lab 22 – the Centre of Excellence for 3D printing! Please join us for an informative and interactive

seminar session, followed by a tour of our 3D printing facility.

On the tour you will have the opportunity to ask questions about the technology and better understand how 3D printing can transform business models and enhance global competitiveness.

Australian Synchrotron The Australian Synchrotron is landmark national research infrastructure, a source of powerful x-rays and infrared radiation that generates elemental, structural and chemical information from diverse sample types to drive research in areas such as medicine, agriculture, environment, defence, transport, advanced manufacturing and mining.

WTIA Newsletter May 2016

| Page 16

IIW ASSEMBLY & CONFERENCE The Australian Synchrotron provides a level of detail not possible under normal laboratory conditions, empowering academic and industry researchers from Australia and New Zealand to problem-solve and innovate by supporting fundamental analysis that reveals how matter fits together, moves, interacts and changes, at a molecular level.

THURSDAY 14 JULY

Visitors will be given an exclusive behind-thescenes tour, starting with the mezzanine level of the Synchrotron, which provides a detailed overview of the MCG-sized facility. Visitors will then move through the nine ‘endstations’ with opportunities to ask questions of the beamline scientists and technicians.

Martin Bon Christiani will present on the impact physicists are having on the construction industry. This will be followed by a Brookfield Multiplex Technical Workshop, including a live 500kN welded connection tension test hosted and presented by Brookfield Multiplex’s Senior Structural Engineering Fellow Dr Matthew Davey and Associate Director and Head Laboratory Technician, Mr Nathan Ray.

Brookfield Multiplex Departure time: 1:00pm Return time: 4:00pm This visit will include a Presentation by Professor Martin Bon Christiani, a former NASA Physicist Brookfield Multiplex’s Principal Physics Fellow, followed by a technical workshop and live testing.

WHY SPONSOR OR EXHIBIT Local and international companies are invited and encouraged to sponsor and/or exhibit at the 69th IIW Annual Assembly and International Conference 2016. The Exhibition will be integrated into the Conference Program with catering breaks served in the exhibition hall.

The Exhibition is a hub for networking and education where face-to-face meetings with your target audience provide an increasingly rare opportunity to form meaningful relationships and physically demonstrate your goods and services. Something that is near impossible to achieve with the same effect via email or phone.

With demand being high it is important to act quickly to secure your chosen sponsorship and maximise your investment through promotion of your organisation in the preconference marketing.

Download the Sponsorship and Exhibition Prospectus.

To apply for sponsorship or exhibition opportunities, please contact Bill Aitken on (02) 8748 0123 or b.aitken@wtia.com.au.

The Australian Synchrotron.

WTIA Newsletter May 2016

| Page 17

Welding Technology Institute of Australia

EXPAND YOUR AUDIENCE. GROW YOUR BUSINESS. Advertise with the WTIA Today WTIA is happy to offer you and your business the opportunity to promote your products and services directly to the decision makers in the welding and fabricating industry足. We have a range of cost effective advertising and editorial packages available, in both Weld Connect and the Australian Welding Journal.

www.wtia.com.au

For further information about advertising in Weld Connect, please contact: WTIA Newsletter May 2016 | Page Bill Aitken on b.aitken@wtia.com.au or +61 (0)2 8748 0123

18