Weld Connect - December 2022

DECEMBER 2022

IN THIS ISSUE THE WINNERS OF WELD AUSTRALIA’S 2022 WELDING EXCELLENCE AWARDS ANNOUNCED | PAGE 10 INSIGHTS FROM FABTECH 2022 |

1

PAGE 24

TAFE DIRECTORS AUSTRALIA 2022 NATIONAL CONVENTION | PAGE 8 Weld Connect | December 2022

WELD AUSTRALIA CONTACTS

IN THIS ISSUE A Message from our CEO

3

Industry News 6 TAFE Directors Australia 2022 National Convention

8

ASME Section IX Course Wrap-Up

9

2022 Welding Excellence Award Winners Announced

10

New South Wales and the ACT

11

Queensland and the Northern Territory

13

South Australia 16 Victoria and Tasmania 17 Western Australia 20 Membership Matters 22 Corrections Victoria VET Centre Of Excellence Program

23

Insights from FABTECH 2022

24

TAFE Queensland - SkillsTech Apprentice Awards

25

Weld Australia’s Exam Calendar

25

Melbourne Polutechnics ‘Mini Maker Fare’

26

Congratulations to All the Newly Qualified Individuals

27

Upcoming Training Courses 28 Fusion Welding Courses 23

NATIONAL OFFICE PO Box 197, Macquarie Park BC NSW 1670 02 8748 0100 office@weldaustralia.com.au weldaustralia.com.au Geoff Crittenden Chief Executive Officer 02 8748 0100 g.crittenden@weldaustralia.com.au ENGINEERING Victor Blain, Engineering Team Manager – South & West 0409 823 991 v.blain@weldaustralia.com.au TRAINING Guy Brooks, Training Manager 0488 743 322 g.brooks@weldaustralia.com.au MARKETING Michelle Bignold, National Manager, Sales & Marketing 0437 106 726 m.bignold@weldaustralia.com.au MEMBERSHIP David Choudry, Membership Manager 0417 878 104 d.choudry@weldaustralia.com.au QUALIFICATION & CERTIFICATION Deniz Yalniz, Qualification and Certification Team Manager 0487 487 170 d.yalniz@weldaustralia.com.au NEW SOUTH WALES Arya Sharifian, Welding Engineer 0419 414 901 a.sharifian@weldaustralia.com.au VICTORIA, TASMANIA & SOUTH AUSTRALIA Victor Blain, Engineering Team Manager – South & West 0409 823 991 v.blain@weldaustralia.com.au QUEENSLAND & NORTHERN TERRITORY Ross O’Bryan, Engineering Team Manager - East 0491 491 888 r.obryan@weldaustralia.com.au WESTERN AUSTRALIA Mehdi Tajfar, Senior Welding Engineer 0417 044 370 m.tajfar@weldaustralia.com.au

10 2

2022 Welding Excellence Award Winners Announced

Cover: NSW Project of the Year Allianz Stadium Roof by S&L Steel

Weld Connect | December 2022

9

ASME Section IX Course Wrap-Up

Over the course of the last month I have had the opportunity to meet with a whole range of members at the ceremonies for Weld Australia’s 2022 Welding Excellence Awards.

We hosted ceremonies in Perth, Adelaide, Brisbane, Sydney and Melbourne. All of the events proved to be exceptionally popular, each one attended by around 100 people.

The events were the perfect opportunity to reconnect with Australia’s welding community after the long hiatus over the pandemic, and celebrate the incredible work of Australia’s welders and fabricators.

The Awards recognised and rewarded professionals whose dedication, skill, and teamwork speak for themselves.

This year’s winners feature businesses, projects and people committed to the pursuit of innovative, sustainable solutions that minimise risk and maximise project outcomes, as well as initiatives designed to increase the breadth and depth of skilled labour within the welding sector.

In particular, I would like to recognise three outstanding individuals who received CEO and Chair Awards this year.

On behalf of Weld Australia, I would like to take this opportunity to thank all our sponsors, without which these Awards would not be possible: BOC, Coregas, Diverseco, the Outsource Institute and ProQM.

Jason is a true champion of the Australian welding industry. He is dedicated to promoting local contractors, and the importance of Australian and international standards. Jason’s company, PMG, delivers innovative, quality work. And, he recently volunteered for the role of Chair of Weld Australia’s defence industry network.

My sincere congratulations go to all the 2022 Welding Excelllence Award winners, who are profiled in this edition of Weld Connect (see the article from page 10).

The ACT & NSW Welding Excellence Awards ceremony.

3

Weld Connect | December 2022

Jason Elias (CEO, Precision Metal Group) was presented with the CEO’s Award for the Welding Professional of the Year.

The Queensland & NT Welding Excellence Awards ceremony.

Abhishek Trivedi (Welding Engineer, Rheinmetall Defence Australia) was presented with the CEO’s Award for An Outstanding Welding Engineer.

Abhishek has worked for Rheinmetall Defence for the last three years. During this time, Abhishek has been instrumental in the setup of a greenfield specialist Military products welding facility at MILVEHCOE in Redbank. The project involved achieving all the required company certifications including; AS/NZS ISO 3834-2 followed by DIN 2303 Q2 and then Q3. Prior to his work at Rheinmetall, Abhishek was a valued member of the Weld Australia team.

Finally, Robert Vernon from TAFE Gippsland was presented with a Chair’s Award for Outstanding Dedicated Service to Welder Training.

Rob plays an integral role in the success of TAFE Gippsland’s Engineering courses, and was instrumental in the TAFE gaining a Certificate IV in Engineering in a Pathway Program into University.

Rob is able to contextualise training and tailor his delivery to suit all learning styles. He has an uncanny ability to engage the ‘quiet student’ to ensure they participate in class. Rob has been a long-term supporter of Weld Australia, serving on our local committee for many years.

HONORARY WELD AUSTRALIA MEMBERS Honorary Weld Australia Membership is awarded by our Board of Directors to individuals who have made a significant long-term contribution to either the welding industry, or Weld Australia. Weld Australia presented several Honorary Memberships at the recent Award ceremonies.

ON BECOMING AN INTERNATIONAL WELDING ENGINEER (IWE) Throughout 2022, I went back to school for the first time in many years. I successfully completed the training required to attain an International Welding Engineer (IWE) qualification.

The course covered a range of material, including welding processes, equipment, materials and their behaviour during welding, construction and design, and fabrication application engineering.

I thoroughly enjoyed the entire experience. The material is interesting and engaging, and the blended learning format works well, particularly when also working full-time.

For anyone who is considering completing the IWE course, I wholeheartedly encourage you to do so. But, be prepared it is hard work and requires a huge amount of commitment over 12 months.

As such, I’d like to recognise everyone who completed the IWE qualification this year and in years prior—it is quite an achievement.

Weld Australia’s 2023 IWE course commences from 16 March. With places filling fast, now is the time to enrol.

My congratulations go to: • Bruce Cannon (Principal Welding Engineer, Weld Australia) • Paolo Corronca (International Welding Engineer) • Doug Hawkes (Managing Director, Structural Integrity Engineering) • Warren Raisin (General Manager, Aitken Welding Supplies) • Alan Taylor (Welding Inspector and Supervisor) • Robert Wiseman (Business Development Manager, Lincoln Electric) ASME SECTION IX COURSE Weld Australia hosted Walter J. Sperko (President, Sperko Engineering Services) from the US in late November. Walter facilitated two courses on ASME Section IX in Perth and Brisbane. Both courses were very well-attended.

The American Society of Mechanical Engineers (ASME) standard regulates the design, development and construction of boilers and pressure vessels.

4

Weld Connect | December 2022

L to R: Geoff Crittenden (CEO, Weld Australia) is presented with his IWE certificate by David Lake (Chair, Weld Australia).

ASME Section IX specifies the requirements for the qualification of welders and the welding procedure specifications. This three day course gave participants a working knowledge of ASME Section IX, including how to comply with its requirements. The feedback from all participants has been very positive. For further details, see the article on page 9.

TAFE DIRECTORS AUSTRALIA 2022 NATIONAL CONVENTION Together with Michael Pitt (National Manager, Education and Training, Weld Australia), I presented at the TAFE Directors Australia 2022 National Convention in November.

Held in Adelaide and attended by over 450 delegates, the theme of this year’s Convention was Courage, Change and Challenge: The Future of TAFE. Michael and I spoke on the topic of Traction and Momentum: Revolutionising Welder Training In Australia. We delved into the welder skills crisis and how we have been working with the National TAFE Consortium on new units of competency and resources for the MEM 2.0 training package.

Our session also covered how the new MEM 2.0 resources can be supported by the use of augmented reality welding simulators. Rather than studying theory, augmented reality transforms training and learning from text books into high-quality interactive experiences that capture the imagination.

For further details, see the article on page 8.

TAFE QUEENSLAND - SKILLSTECH 2022 AWARDS The 2022 TAFE Queensland - SkillsTech Apprentice Awards were held in Brisbane in mid November. With 360 people in attendance, the night was a celebration of apprentices and their employers. Weld Australia was proud to sponsor the Engineering and Manufacturing Apprentice of the Year Award, which went to Peter Fontaine from Ai Group and GM Poles. Peter also went on to win the biggest award of the event— the Outstanding Apprentice of the Year. I’d like to congratulate Peter who has shown great dedication and skill across his engineering apprenticeship. For further details, see the article on page 25.

SEASON’S GREETINGS I would like to take this opportunity to thank all those members who have contributed to Weld Australia this year. In particular, my thanks go to the hard-working members of all our local committees.

I would also like to thank the Weld Australia Directors who commit a significant proportion of their free time to Board matters. I thank them for their advice throughout 2022. Finally, I would like to thank the entire Weld Australia team for their hard work, enthusiasm and dedication.

I wish everyone a safe and happy festive season and a prosperous new year.

Geoff Crit enden

CEO, Weld Australia

Season’s Greetings &

Happy Holidays from Weld Australia

On behalf of everyone at Weld Australia, we would like to thank our members and clients for their continued support throughout 2022, and to extend our warmest wishes for the holiday season.

Our National Office will be closed over Christmas and the New Year, from Friday 23 December 2022 to Wednesday 4 January 2023.

5

Weld Connect | December 2022

K-TIG ADVANCES NAVAL SHIPBUILDING APPLICATIONS

NSW LAUNCHES $30M FUTURE INDUSTRIES INVESTMENT PROGRAM FOR MANUFACTURING

K-TIG recently announced that it has been awarded a research project under the National Shipbuilding Research Program (NSRP). The NSRP is a collaborative program of the major US naval shipyards, sponsored by the Naval Sea Systems Command which manages the procurement and delivery of ships to the US Navy.

The Program’s continuing mission is to reduce costs associated with U.S. shipbuilding and ship repair and to share innovation IP across its members.

The NSW Government’s new $30 million program is designed to ensure the state remains a modern manufacturing powerhouse by attracting more investment in industries such as medical technology, digital systems, clean energy, defence and aerospace.

The objectives of the K-TIG project (titled Breakthrough Welding Process for Pipe and Plate) include: • Developing mechanised K-TIG methods for candidate shipbuilding and repair applications • Demonstrating that K-TIG methods meet NAVSEA TECH PUB 248 welding procedure qualification test requirements; and • Supporting the implementation of K-TIG’s technology at the participating shipyard.

K-TIG is the project lead, with Fincantieri Marinette Marine (FMM) and The Edison Welding Institute (EWI) also coming on board as team members. Additionally, NAVSEA and Naval Special Warfare Center, Carderock Division, will participate in the evaluation of K-TIG. The term of the research project is 12 months and due to complete in January 2024. Under the research project K-TIG will receive approximately US$70,000 by way of research funding. K-TIG will supply welding services and process protocols under the research project.

6

Weld Connect | December 2022

Minister for Enterprise, Investment and Trade Alister Henskens said the new Future Industries Investment Program would drive growth in emerging industries and ensure NSW remains at the cutting-edge of modern manufacturing. “NSW is the manufacturing powerhouse of Australia and is home to a diverse range of innovative manufacturers that make and export world-leading products. We need to ensure our state remains ahead of the pack when it comes to the manufacturing of highvalue products and that means backing businesses to establish and expand their operations right here in NSW.” The new program is part of the NSW Government’s response to the Modern Manufacturing Taskforce’s report, which is available online.

The Future Industries Investment Fund is an open, competitive grant program that will provide rebate support for eligible businesses that create a minimum of 20 ongoing net new full-time equivalent jobs in NSW; or invest a minimum of $3 million in capital expenditure (excluding assistance from this Program) within NSW as part of the overall project. Applications open on Thursday 8 December 2022, with further details available online.

RESEARCH REVEALS AUSSIES WANT MORE MANUFACTURING IN AUSTRALIA A 2022 study by Roy Morgan has shown that 90% of Australians think we should be undertaking more manufacturing in Australia.

The study was held in conjunction with the second annual Australian Made Week in June 2022, a campaign that encouraged shoppers to buy genuine Australian Made products, and highlighted the importance of supporting Australian businesses following the effects of the pandemic.

1,000 Australians were surveyed on their thoughts on Australian manufacturing and the effects of the COVID-19 pandemic on their purchasing behaviours and resourcing experiences.

The results showed that Australians are troubled by the number of products not made in Australia and reported a desire for increased local manufacturing and support of local jobs.

93% of Australians said it was important to build up the local manufacturing industry to protect Australians from problems with the supply of products made overseas.

76% of Australians reported being concerned about the number of products sold in Australia that are made overseas.

Additionally, participants said that the pandemic had emphasised risks and issues associated with international product resourcing. In the last 12 months, 49% of Australians reported having difficulty getting products they would usually buy that are made overseas, and 71% have actively been looking to buy more Australian-made products.

The results of this latest study are consistent with previous research that indicate Australians’ preference for Australian-made products and manufacturing. In 2020, 93% of survey participants said they were more likely to buy products made in Australia – an increase from 87% in 2019.

This article first appeared on australianmanufacturing.com.au

Do you need a PSA test?

A PSA Test is a simple blood test for the early detection of prostate cancer.

Your GP can order the blood test for you.

Do you have a family history of prostate cancer?

NO. Talk to your doctor about PSA testing starting at age 50.

YES. Talk to your doctor about PSA testing starting at age 40.

If you develop symptoms, talk to your doctor immediately, regardless of age.

Call us today 1800 22 00 99 pcfa.org.au

Awareness_Weld Australia Ads.indd 4

7

Weld Connect | December 2022

13/10/2022 1:38 pm

TAFE DIRECTORS AUSTRALIA 2022 NATIONAL CONVENTION Geoff Crittenden (CEO, Weld Australia) and Michael Pitt (National Manager, Education and Training, Weld Australia) presented at the TAFE Directors Australia 2022 National Convention in November.

Falling completion rates were not surprising given the Manufacturing and Engineering Training Package (MEM 2.0) released in 2020 was inadequate for the needs of industry, and imposed significant burdens on apprentices, employers, and TAFEs. In addition, MEM 2.0 differed very little from the 1998 and 2005 versions, ignoring the huge technological advancements in Australia’s manufacturing industries.

Held in Adelaide and attended by over 450 delegates, the theme of this year’s Convention was Courage, Change and Challenge: The Future of TAFE. The Convention brought together expert speakers from government, TAFE Institutes, industry and academia, as well as representatives from students and the community to look at major trends in the world of work, government responses to the skills challenge, and international developments in education and training.

This session took delegates through the story of how Weld Australia and TAFEs across the nation are overcoming the challenge of revolutionising welder training. Together with the National TAFE Consortium, Weld Australia has created new units of competency and a set of nationally consistent resources for MEM 2.0. The new resources are completely online and accessible via mobile device or computer, allowing students to access learning at the time, place and pace that suits them.

TDA Chief Executive Officer, Jenny Dodd, said the conference tackled some of the major issues for TAFE, industry and the future of skills and work. “At a time when TAFE is at the centre of the workforce and skilling agenda, this is a chance to hear about what is working well, and where we need to adapt to deliver the jobs and skills of tomorrow.”

The session covered how the new MEM 2.0 resources can be supported by the use of augmented reality welding simulators. Rather than studying theory, augmented reality transforms training and learning from text books into high-quality interactive experiences that capture the imagination.

Geoff and Michael spoke on the topic of Traction & Momentum: Revolutionising Welder Training In Australia. Australia is facing a looming shortage of skilled welders—70,000 additional welders will be needed in the next 10 years. Yet, completion rates of Certificate III in Engineering continue to fall by 23% annually.

The session also focused on how collaboration between TAFE and industry is essential in overcoming the challenge of skills shortages. Industry, TAFEs and schools must work together to develop and deliver training programs and resources that engage, excite and attract students.

TAFE Directors Australia 2022 National Convention.

Weld Australia would like to welcome the following new members who joined over the last month.

CORPORATE MEMBERS •

Solidus Inspection & Quality Management: solidusiq.com.au

INDIVIDUAL MEMBERS

Michael Pitt (second from the left) at the TAFE Directors Australia 2022 National Convention.

8

Weld Connect | December 2022

• • • •

Anthony Phillips Caleb Jackson Hector Daniel Herrera Rozo John Mariani

ASME SECTION IX COURSE WRAP-UP In late November, Weld Australia hosted a three day course that delved into ASME Section IX. The course was held in both Perth and Brisbane, and proved to be exceptionally popular.

The American Society of Mechanical Engineers (ASME) standard regulates the design, development and construction of boilers and pressure vessels. ASME Section IX specifies the requirements for the qualification of welders and the welding procedure specifications.

Taught by Walter J. Sperko (President, Sperko Engineering Services) from the United States, the course gave participants a working knowledge of ASME Section IX, including how to comply with its requirements.

The ASME IX Course attendees in Brisbane.

Walter provided a review of the welding processes and variables, and basic steel welding metallurgy. This gave attendess the background in welding technology needed to interpret and understand Section IX. The mechanics of using Section IX and how to address its requirements were then explained in a simple, straightforward manner.

Emphasis was placed on writing welding procedures so that they contribute positively to the manufacturing process and on qualifying procedures in a cost-effective manner. The requirements for welders and operators was also discussed, with particular emphasis on minimising the cost and maximising the usefulness of qualifications. Time was also provided to address individual participant’s problems and concerns.

The ASME IX Course attendees in Perth.

The feedback received from all attendees has been extremely positive.

The ASME IX Course attendees in Brisbane.

The ASME IX Course attendees in Perth.

9

Weld Connect | December 2022

The ASME IX Course attendees in Brisbane.

Craftsmanship, quality and professionalism were front and centre over the last month, with the winners of the 2022 Welding Excellence Awards announced at ceremonies across the country.

Weld Australia’s Excellence Awards are the most prestigious event on the welding industry calendar. The Awards showcase and celebrate the world-class work being undertaken by local welders, fabricators and industry educators.

According to Weld Australia’s CEO, Geoff Crittenden, “Weld Australia’s 2022 Welding Excellence Awards celebrate the incredible work of Australia’s welders and fabricators. The Awards recognise and reward professionals whose dedication, skill, and teamwork speak for themselves.”

“This year’s winners feature businesses and people committed to the pursuit of innovative, sustainable solutions that minimise risk and maximise project outcomes, as well as initiatives designed to increase the breadth and depth of skilled labour within the welding sector,” Crittenden said.

Weld Australia would like to take this opportunity to thank all our sponsors, without which these Awards would not be possible: BOC, Coregas, Diverseco, the Outsource Institute and ProQM. After a record number of entries and an exceptional calibre across the board, it was a hard-fought contest this year. All of the runners up and winners should be incredibly proud of their achievement. All the winners are profiled in the following pages.

The ACT and NSW Awards Ceremony.

The Victoria and Tasmania Awards Ceremony.

The Queensland and NT Awards Ceremony.

The South Australia Awards Ceremony.

WITH THANKS TO OUR AWARDS SPONSORS

10

Weld Connect | December 2022

New South Wales and ACT Welding Professional of the Year – Welding Coordinator Michael Cameron from MC Quality Control Michael has helped MC Quality grow while maintaining the company’s vision, values and behaviours. A natural leader, he is professional, knowledgeable and respected by his peers.

The Runner Up is: Alan Kelly from Hifab Services.

Welding Professional of Year – Welding Supervisor Sungmook (AKA Mac) Park from TSS Engineering Mac has played a key role in helping TSS Engineering evolve from a small fabrication workshop to a multimillion contractor providing services for major projects like WestConnex.

Michael Cameron receives his award.

Welding Professional of Year – Welding Inspector Mark Lamb-Crane from MC Quality Control Mark is a valuable employee of MC Quality who has repeatedly provided high quality welding inspections to MC Quality customers. Every inspection has been conducted professionally, and every report submitted has been detailed and accurate.

Sungmook (AKA Mac) Park receives his award.

The Runner Up is: David Mitchell from MC Quality Control.

Young Trades Person of the Year Arnekin Loftus from Formula Offroad Arnekin has shown outstanding dedication and commitment to his Certificate III in Engineering at TAFE NSW, as well as his work at Formula Offroad. He recently won the Gold Medal for the Welding Category at the WorldSkills Regional Competition for Sydney West.

The 2nd Runner Up is: Michael Labb from Empire Industrial Engineering. The1st Runner Up is Todd Methven from DBC Group Australia.

Mark Lamb-Crane receives his award.

Training and Education – Individual Teacher Award Alan Bailey from Central Coast Community College Alan is a dedicated and talented trainer. He leads with his heart and has worked tirelessly with industry to continuously improve course delivery and equip apprentices with practical workplace skills. Importantly, Alan makes his lessons fun. Feedback from students is that they’ve never had a better learning experience.

The Runner Up is: Riccardo De Francesco from TAFE NSW.

11

Weld Connect | December 2022

Arnekin Loftus receives his award.

Training and Education – Organisation Award The New South Wales Department of Education The New South Wales Department of Education introduces the WELD Hub Manufacturing program to provide students with access to Augmented Reality Welding Simulators in 2019. The program has seen 80 machines installed in 40 schools. The program is delivering exceptional results.

The Runner Up is: Glencore Coal Assets Australia.

Project of the Year Award Allianz Stadium Roof by S&L Steel The new world class Allianz Stadium was designed to create an unrivalled experience for spectators, athletes, and entertainers. S&L Steel fabricating the roof for the new Stadium, which consisted of: a tension ring located on the outside perimeter of the roof, four derricks which support the roof in the four corners and ten truss sections which are complemented with the diagrid a combination of RHS and CHS members.

The New South Wales Department of Education.

The Runner Up is: Maintenance Work on the Deep Space Station 43 Antenna by DBC Group.

Company of the Year – Fabrication MC Quality Control

Allianz Stadium Roof by S&L Steel, Project of the Year.

Established in 2015, MC Quality is committed to growing and supporting the welding industry long-term.

The company has invested significantly in its team, and consistently delivers improvements in quality for its customers, and opportunities for its people.

Company of the Year – Gas and Gear BOC Gas & Gear in Lismore In early 2022, Queensland and Northern NSW were affected by devastating floods. Throughout the flood, the BOC Lismore team was integral in getting medical cylinders transported from Brisbane to Lismore Base Hospital. They also worked tirelessly to assist the SES with getting high quality medical oxygen to isolated nursing homes in areas cut off by the floods.

MC Quality Control, Company of the Year - Fabrication.

CEO’s Award for the Welding Professional of the Year Jason Elias from Precision Metal Group Jason is a true champion of the Australian welding industry. He is dedicated to promoting local contractors, and the importance of Australian and international standards. Jason’s company, PMG, delivers innovative, quality work. And, he recently volunteered for the role of Chair of Weld Australia’s defence industry network.

Jason Elias receives his award.

12

Weld Connect | December 2022

Queensland and the Northern Territory Queensland Welding Professional of the Year – Welding Coordinator Rod Clarke from Berg Engineering When it comes to welding highly alloyed and exotic materials, Rod is an expert. A big believer in lifelong learning, Rod holds various welding qualifications including an IWS, IWI and an IWT. He is also a member of the Weld Australia Queensland committee.

Northern Territory Welding Professional of the Year – Welding Coordinator Grant Ryan from A&B Welding Grant lives and breathes welding and fabrication. As the owner of A&B Welding, he is committed to the highest welding quality standards. He dedicates considerable time to training the next generation of welders, and has been the Chair of Weld Australia’s Northern Territory committee for some years. His passion for welding is contagious.

Rod Clarke receives his award.

The Runner Up is: Emma Claridge from Day One Solutions.

Welding Professional of the Year - Welding Supervisor Nicholas Marsden from MC Quality Control Over the last 12 months, Nicholas has provided welding supervision and quality control services for MC Quality after achieving his IWI-B qualification. With over ten years’ experience, Nicholas’ has conducted over 150 welding supervision interactions and completed 100 welding supervision reports.

Grant Ryan receives his award.

Welding Professional of Year – Welding Inspector Rachel Abbot from Downer Group A qualified boilermaker and IWI, Rachel has worked on major projects across the marine, industrial, power and energy sectors. She’s worked her way up from an apprentice and held key business development and technical roles. Rachel is a Quality Coordinator with Downer working on a turbine rebuild at the Callide Power Station. On site, she is making a significant contribution to the safety, quality, and success of the project.

Rachel Abbot, Professional of Year – Welding Inspector.

The Runner Up is: Clancy Crerar from iScope4Repair.

Young Trades Person of the Year Kohan Hanby from Hanby Welding and Engineering Kohan’s attention to detail, quality and high level of craftmanship make him a worthy award recipient. He was named Engineering Apprentice of the Year at the TAFE Queensland 2022 Cairns Trade Excellence Awards and claimed the event’s top accolade, the Outstanding Apprentice of the Year Award. Kohan also competed in this year’s WorldSkills Competition.

The Runner Up is: Brittany Hague from JRS Manufacturing Group.

13

Weld Connect | December 2022

Kohan Handby, Young Trades Person of the Year.

Young Indigenous Trades Person of the Year Hayden Fox from Bridgeman Hayden completed his apprenticeship with Bridgeman and is now a qualified tradesperson. He has actively sought more responsibility in his role and has a passion for welding. He demonstrates a superb work ethic, is recognised as one of Bridgeman’s best welders and is often paired with new employees as a role-model for safety, productivity and dedication.

Training and Education – Individual Teacher Award Tasvir Singh from TAFE Queensland – East Coast Tasvir is continually on the lookout for new training opportunities and methods that will benefit his students and the welding industry as a whole. Committed to his own professional development, Tasvir has undertaken a range of welding qualifications, up to and including IWI. He works closely with industry to deliver training that is relevant and in-line with industry standards.

Hayden Fox, Young Indigenous Trades Person of the Year. .

The Runner Up is: Mark Ketter from TAFE Queensland – South West.

Training and Education – Organisation Award The Outsource Institute The Outsource Institute has provided quality vocational engineering qualifications and advanced specialised technical skills for over 20 years. They take an innovative approach that features industry collaborations and pathways that improve access to education, particularly in remote locations. The Outsource Institute is also committed to initiatives that actively increase female engagement with STEM and trade-based vocational education.

Tasvir Singh receives his award.

The Runner Up is: Glencore Coal Assets Australia.

Project of the Year Award Greenfield Construction Project for a large CSG Company by Ventia This project for a large CSG company required Ventia to engage and manage multiple contractors for all aspects of the construction from Earthworks, Pilin, Civil, Electrical and Instrumentation. Ventia performed all pipe installation, field welding and bolt ups. This required welding large diameter piping in both carbon steel and stainless steel.

The Outsource Institute receives their award.

The Runner Up is: Coombabah Sewerage Treatment Plant by Bridgeman.

Greenfield Construction Project for a large CSG Company by Ventia, Project of the Year.

14

Weld Connect | December 2022

Indigenous Company of the Year Bridgeman Bridgeman is a 25 year old proud Indigenous owned, operated and Supply Nation certified company that offers leading-edge capability in the areas of advanced metal manufacturing and construction. They are committed to providing leadership, support, opportunity, and encouragement to Aboriginal and Torres Strait Islander peoples and the broader community.

Queensland Company of the Year – Fabrication JRS Manufacturing Group JRS Manufacturing Group specialises in fabrication consultation and construction of plate, pipe and structural steel products. Quality is defined on paper, in people and across every product delivery at JRS Manufacturing Group. JRS recently established their own Skills Academy. An Australian-first hybrid learning framework, the JRS Skills Academy will help strengthen the local advanced manufacturing ecosystem.

Bridgeman receives their award.

The Runner Up is: Rockpress.

Northern Territory Company of the Year – Fabrication A&B Welding A & B Welding specialises in all alloy and carbon steel piping, structural fabrication. They were the first company in Australia to obtain ISO 3834: Part 2 Accreditation in 2005, and have held it continuously since. What sets A & B Welding apart is its commitment to be a quality and client focussed business.

JRS Manufacturing Group, Queensland Company of the Year.

Company of the Year – Gas and Gear Coregas Coregas is the only Australian industrial gases company and has been operating since 1974. We manufacture gases locally and distribute throughout Australia and New Zealand via a network of branches and third parties. As a key partner to the welding industry, Coregas is always seeking to raise the bar in terms of service, quality and value.

A&B Welding, Northern Territory Company of the Year.

CEO’s Award for An Outstanding Welding Engineer Abhishek Trivedi from Rheinmetall Defence Australia Abhishek has worked for Rheinmetall Defence for the last three years. During this time, Abhishek has been instrumental in the setup of a greenfield specialist Military products welding facility at MILVEHCOE in Redbank.

The project involved achieving all the required company certifications including; ISO 3834-2 followed by DIN 2303 Q2 and then Q3. Prior to his work at Rheinmetall Defence, Abhishek was a valued member of the Weld Australia team.

15

Weld Connect | December 2022

Abhishek Trivedi receives his award.

South Australia Welding Professional of the Year – Welding Coordinator Rebecca Cameron from Mine Tech

Company of the Year – Fabrication – Large Organisation Mine Tech Engineering

Bec is an outstanding Welding Coordinator. Her experience and knowledge is second to none. She is the lead of Mine Tech’s Quality Assurance department, and has implemented new systems to take the company into the future.

Mine Tech Engineering is an innovative engineering, fabrication and construction company. Their team boasts technical know-how and vast experience working across a variety of carbon steels, stainless steels, alloys and plastics. Mine Tech is committed to innovation, quality and providing opportunities for its people.

Welding Professional of Year – Welding Inspector John Watson from BAE Systems Adelaide A qualified welder with over 40 years of experience in both Australia and the UK, John is committed, energetic and efficient. He plays a key role in training and supervising junior team members, helping them improve their skills.

Training and Education – Organisation Award TAFE SA TAFE SA enables students, industries and communities to develop, grow and thrive through high quality education and training delivery. Their state of the art Advanced Welder Training Centre includes augmented reality welding simulators, that help them deliver training that meets high standards of quality, accessibility and flexibility.

Company of the Year – Fabrication – Small Organisation Bowhill Engineering

Company of the Year – Gas and Gear K-TIG K-TIG is an Australian owned manufacturer of a patented, high quality, high productivity and repeatable welding technology known as Keyhole TIG. Over a 10-year period K-TIG has evolved from a set of advanced physics developed by the CSIRO to become one of the world’s most advanced welding technologies.

Ken Trevena Award David Price from ASC David has played an essential role in developing and delivering high quality welding processes, resources and quality systems for the fabrication of the Collins Class Submarines at ASC. David has been the Chair of Weld Australia’s South Australia Committee since 2018, actively promoting our activities.

Bowhill Engineering is a high performing, innovative 2nd generation family business. Established over 40 years ago, Bowhill has a workforce of 60 people and an enviable track record for project delivery.

Rebecca Cameron receives her award.

David Price from ASC.

The Bowhill Engineering team.

John Watson receives his award.

16

Weld Connect | December 2022

Victoria and Tasmania Welding Professional of the Year – Welding Coordinator Mathew Billman from U-NEEK Bending With a career spanning 20 years, Mathew has vast experience and qualifications, and is an IWT. Mathew developed and implemented a number of management systems at U-NEEK Bending which led to the company becoming certified to AS9100, AS/NZS ISO 3834, DIN 2303 and EN 15085. He is also a trainer and mentor at Chisholm Institute of TAFE and volunteers on Weld Australia’s Victorian Committee.

The Runner Up is: Saddegh Abbaspour from Hofmann Engineering.

David Lake (Chair, Weld Australia) and the Uneek Bending team.

Welding Professional of Year – Welding Supervisor Basyl Jakimow from Welding Management Services Basyl’s career in welding spans an impressive 40 plus years. So, it comes as no surprise that he has extensive experience both materials of all types, as well as a whole range of sectors. He also holds an impressive array of qualifications.

Victorian Welding Professional of Year – Welding Inspector Paul Gedye from Total Piping and Mechanical

Basyl Jakimow from Welding Management Services.

With experience in pharmaceuticals, oil and gas, Paul holds several welding qualifications—most of which he gained at night school while working full time. Paul’s dedication to welding, high level of skill, passion and commitment make him a worthy winner.

The Runner Up is: Bryan Hart from Weldscope.

Tasmanian Welding Professional of Year – Welding Inspector Kiah McCreadie from the Tasmanian Minerals Manufacturing and Energy Council

Paul Gedye from Total Piping and Mechanical.

Kiah has over 15 years experience, and holds both an IWS and an IWI-B qualification. He has held supervisor, team leader and fabricator roles in the health, food, manufacturing and mining industries. He is now pursuing his passion for teaching and mentoring at the Advanced Welding Centre Supervisor at TMEC.

Kiah McCreadie receives his award.

17

Weld Connect | December 2022

Tasmanian Training and Education – Individual Teacher Award Simon King from Incat Simon has over 25 years experience in Aluminium and steel welding and is undertaking an IWI qualification to further his knowledge and skills. He is a passionate trainer and welder, who loves teaching. Simon is responsible for preparing Incat’s apprentices for DNV certificate assessments.

The Runner Up is: Stephen Parker from Incat.

Simon King from Incat.

Victorian Training and Education – Individual Teacher Award Anthony Monagle from Federation TAFE During his time at Federation TAFE, Anthony has designed and introduced a number of projects that enhance the learning experience for apprentices. These projects focus on the real-world skills needed by industry like the use of CNC across fabrication tasks. Anthony has delivered quality training outcomes that have been highlighted by senior personnel and in feedback from apprentices.

Anthony Monagle from Federation TAFE

The Runner Up is: Sowatt Hyunh from Chisholm TAFE. Small Training Organisation Award Ringwood Training Ringwood Training provides a unique government school RTO training model with a continuing and sustained history of success and innovation. The organisation delivers quality blended learning that combines practical workshop and IT laboratory based applied learning, with online student-friendly resources.

Ringwood Training receive their award.

Victorian Training and Education – Organisation Award Chisholm Institute Chisholm Institute has worked diligently with the manufacturing industry over many years. In the last 12 months, their relationship with SEMMA, AMTIL and Ai Group has further reinforced Chisholm’s support for the industry. Chisholm has delivered ‘short and sharp’ training programs to up-skill participants and help fill skills gaps.

Tasmanian Training and Education – Organisation Award Incat Training is an integral element of Incat’s success. Incat has a small, highly effective training team whose core focus is providing internal non-accredited training. In the 2022 financial year, approximately 75% of Incat employees attended training—equivalent to 900 hours of training per month.

18

Weld Connect | December 2022

Chisholm Institute receive their award.

South Metropolitan TAFE.

Incat - Training and Education – Organisation of the Year. .

Project of the Year Award New PAO Tube For EODAS System On The F35 Joint Strike Fighter By UNEEK The Electro-Optical Distributed Aperture System (EODAS) provides a 360-degree sensor suite for the F-35 Joint Strike Fighter. This sensor gives F-35 pilots unprecedented situational awareness to navigate safely in any environment. The PAO (Poly Alpha Olefin) tube that UNEEK manufactures is a critical component of the EODAS system. It maintains the optimum temperature for the electronics and optics inside the assembly.

The project involved exacting requirements of material sourcing, tube bending, fit up and assembly, welding, forming, surface treatment, and pressure testing.

New PAO Tube For EODAS System On The F35 Joint Strike Fighter

By UNEEK.

The Winner of the 2022 Company of the Year – Fabrication Hofmann Engineering Since 1969 Hofmann Engineering has provided specialist engineering services to Australia’s industry leaders. Quality Assurance accreditation to ISO 3834 and EN 15085—among others—complements their total quality culture. Hofmann’s commitment to continuous improvement touches every aspect of their products, services, and customer support.

The Runner Up is: Thornton Engineering.

David Lake and David Hubbert (Hofmann Engineering).

Company of the Year – Gas and Gear BOC Gas & Gear – Albury-Wodonga For over 80 years, BOC’s gases and expertise have contributed to advances in industry and everyday life.

Today, the BOC Gas & Gear site at Albury-Wodonga offers the highest quality and service to rural customers and the community in the Riverina District and to NorthEastern Victoria.

CEO Special Award for Outstanding Dedicated Service to Welder Training Robert Vernon from TAFE Gippsland Rob plays an integral role in the success of TAFE Gippsland’s Engineering courses, and was instrumental in the TAFE gaining a Certificate IV in Engineering in a Pathway Program into University. Rob is able to contextualise training and tailor his delivery to suit all learning styles. He has an uncanny ability to engage the ‘quiet student’ to ensure they participate in class.

Rob has been a long-term supporter of Weld Australia, serving on our local committee for many years.

BOC Gas & Gear – Albury-Wodonga.

David Lake and Robert Vernon.

19

Weld Connect | December 2022

Western Australia Welding Professional of Year Matthew Lee from Taylors Engineering and Welding Services Matthew is an expert welding and quality control and assurance supervisor, with extensive industry experience.

He has worked across various industries, from mining through to construction. He takes professional development seriously, having gained IWS, IWI-S, and AS2214 qualifications.

The 2nd Runner Up is: Trent Groves from GF Engineering.

The 1st Runner Up is: Selvakumar Subbiah from CPB Contractors.

Young Trades Person of the Year David Jonas from Bossong Engineering

Matthew Lee receives his award.

David completed his apprentice early, and is undertaking additional training that will see him take on the role of Manager of the Bossong PTA division, overseeing several robots and completing jobs for customers in the oil and gas industry. David’s contribution to such a wide scope of work and his attitude towards improving himself make him a deserving winner.

The Runner Up is: Sapphire Bengiler from Monadelphous.

Training and Education – Individual Teacher Award Darren Way from South Metropolitan TAFE Having been a boilermaker and fabricator for over 20 years, Darren gained extensive hands-on industry experience. A big believer in personal development and a love of mentoring apprentices, saw Darren move into industry training in 2008. All his students and colleagues agree—Darren’s passion for welding and the industry is clear in his teaching.

David Jonas from Bossong Engineering.

Training and Education – Organisation Award South Metropolitan TAFE South Metropolitan TAFE is one of Western Australia’s most diverse training providers. The college offers more than 340 qualifications, including tailored relevant welding and fabrication training. Their facilities are world-class, providing students with hands-on experience in a real-life industry setting.

South Metropolitan TAFE.

20

Weld Connect | December 2022

Company of the Year - Fabrication Monadelphous Group Monadelphous Group makes a significant contribution and ongoing commitment to enhancing the welding and fabrication industry. They have created innovative solutions through research projects, developed a comprehensive apprenticeship program, and boast an excellent safety record.

The Runner Up is: GF Engineering.

Company of the Year – Gas and Gear Coregas Coregas is the only Australian industrial gases company and has been operating since 1974. We manufacture gases locally and distribute throughout Australia and New Zealand via a network of branches and third parties. As a key partner to the welding industry, Coregas is always seeking to raise the bar in terms of service, quality and value.

Coregas, Company of the Year - Gas and Gear.

Geoff Crittenden opens the WA Awards for Excellence.

Monadelphous receives their award.

Members of the South Metropolitan TAFE team.

Attendees at the WA awards ceremony.

21

Weld Connect | December 2022

2023 MEMBERSHIP RENEWALS Weld Australia would like to thank all its members for their continued support this year. It’s now time to renew your Weld Australia membership for 2023.

You should have already received an email with instructions on how to do this. If not, the quickest and easiest way to renew your membership today is via our secure payment gateway - click here to renew now.

As always, please feel free to reach out to our Membership Manager David Choudry on 0417 878 104 or email membership@weldaustralia.com.au if you have any suggestions or questions.

A Year in Review While 2022 presented challenges such as supply chain issues and skilled labour shortages, Australia’s welding industry has continued to go from strength to strength.

In fact, our 2022 Member Survey indicated that most fabrication businesses have a very strong pipeline of work, capacity for additional work, and rate the prospects of their business as strong.

Weld Australia members continue to lead the way in innovation, environmental sustainability, diversity and inclusion, and health and safety. We are extremely proud to be your peak body.

We’ve been busy behind the scenes at Weld Australia too. Our advocacy work paid dividends this year.

Focused on issues such as skill shortages, onshoring and local content procurement, renewable energy and adherence to quality standards, we generated significant media coverage and political interest.

As we acclimatised to the ‘new normal’ in a postCOVID world, our calendar of in-person events returned across the country. We also hosted a very successful and much expanded program of Welding Excellence Awards.

Our training department went from strength to strength, with over 600 students completing courses this year. Our work on the MEM2.0 project with the National TAFE Consortium continued, with pilot programs run in Western Australia. We expanded our Advanced Manufacturing School Outreach Program in New South Wales significantly, with over 80 welding simulators installed in more than 40 schools.

Finally, our VET Centre of Excellence program with Corrections Victoria at HM Prison Langi Kal Kal commenced and is already returning great results.

It’s the ongoing support from members that allows us to continue advocating for the welding industry in Australia, and we wholeheartedly thank you for your role in that this year. We hope you continue your support in 2023.

Weld Australia membership is an investment in the success of your career or your business. We will help you increase your income, decrease your costs and give you a competitive advantage over non-members.

Questions? Queries? Wondering how Weld Australia can help support your business, staff or career progression?

Contact David Choudry (Membership Manager, Weld Australia) on d.choudry@weldaustralia.com.au to set up a 30 minute Zoom chat. David will take you through the ways that we can help.

DOWNLOAD THE YEAR IN REVIEW 22

Weld Connect | December 2022

JOIN WELD AUSTRALIA TODAY

GET INVOLVED IN THE CORRECTIONS VICTORIA VET CENTRE OF EXCELLENCE PROGRAM In 2022, Corrections Victoria expanded the VET Centre of Excellence model to deliver Fusion Welding to ISO 9606 certification standard to complement the Metal Fabrication industry at Langi Kal Kal prison.

Federation University delivers the training program with the support of Weld Australia and on-site prison industry staff.

As part of the program, augmented reality (AR) training was introduced to expand the welding skills of the prisoner learners to meet international standards.

A welding workshop sits alongside the AR training room so that participants can work on projects to use and practice their welding skills in the physical as well as virtual environments.

To participate in the program, prisoners are invited to submit an Expression of Interest and then selected through an interview process. Up to eight participants can be accommodated in the intensive 14-week program.

The VET Centre of Excellence model links participating prisoners with prospective employers and pre- and post-release support service providers.

These connections provide prisoners with sustainable pathways to employment and support to reintegrate to society post- release.

Soldamatic welder training at HM Prison Langi Kal Kal.

23

Weld Connect | December 2022

One of students said: “I wanted to take part in this course to not only further my knowledge and experience of welding but to be able to give myself the ability to provide a positive, reliable, and sustainable future for my family.”

“When I am released I am keen to find as much work as possible in the engineering trade working in the railways, or similar areas that require good welders. I don’t see my life revolving around prison and I want to have real work opportunities in the community when I’m released.”

HOW TO GET INVOLVED Australia is facing a looming shortage of skilled welders—70,000 additional welders will be needed in the next 10 years.

VET training and employment pathways as part of prisoner rehabilitation could help alleviate some of these skills shortages.

The national roll out of the VET Centre of Excellence model will require commitment and collaboration from industry nationally in providing secure employment opportunities for prisoners post-release.

If you’d like to get involved as a prospective employer, click on the link below and complete this quick and easy Expression of Interest form.

Geoff Crittenden and Jeff Wanliss inspect a prisoners welding at the Welding Employment Expo.

INSIGHTS FROM FABTECH 2022 FABTECH 2022 was held in Atlanta in the US in early November. Bruce Cannon (Principal Welding Engineer, Weld Australia) attended the three day event, which is North America’s largest metal forming, fabricating, welding and finishing expo. Bruce provided the following insights and observations from the event.

Linde (owners of BOC) demonstrated a GMAW cobot with a Binzel extraction torch fitted. They also had a similar cobot fitted with plasma head cutting RHS operating. Another company had a similar cobot with a rotary polishing head fitted demonstrating on a shape similar to a car door, and another a version spot welding. Interestingly, cobots have sensing that detects levels of resistance typical of that if it contacts a person.

You can move the head to start and finish positions and set way points to may programming really easy. Good for jobbing shops whereas robots are more suited to volume runs.

Cobot with a GMAW torch fitted.

Linde demonstrated their hand held laser welder (IPG branded and also separately demonstrated at the show) uses electrical contact with the work piece before the beam can be activated. The user must wear tuned laser glasses set for laser light frequency under a welding helmet with a shade 4 filter. The unit must be used in a booth with anti reflective and absorptive coatings. PEP includes GMAW welders gloves (can burn through light weight GTAW gloves). The laser beam is dangerous to 360m if unprotected.

Linde also supply users with a copy of the standard ANSI Z136.9 which includes info on how to set up a laser booth. These hand-held devices are very good for welding light gauge sheet steel with minimal training.

It is easy to produce a 1-2mm fillet with minimal distortion. Anything larger requires a multi run fillet.

EASYKleen electropolishing manufacturers (from Moruya, NSW) at Fabtech.

24

Weld Connect | December 2022

RHS sections with shapes cut by a plasma torch mounted on a cobot.

TAFE QUEENSLAND - SKILLSTECH 2022 APPRENTICE AWARDS The 2022 TAFE Queensland - SkillsTech Apprentice Awards were held at Howard Smith Wharves on Thursday 10 November. Almost 360 guests were in attendance, more than 200 of which were finalists and their associated employers and guests.

The night was a celebration of apprentices and employers achieving greatness in their trade training. With 14 awards on offer for unique trade categories’ Apprentice of the Year, two employer awards, and two special awards for the General Manager’s and Outstanding Apprentice of the Year, it was a full night of awards.

Weld Australia was proud to sponsor the Engineering and Manufacturing Apprentice of the Year Award, which went to Peter Fontaine from Ai Group and GM Poles. Peter also went on to win the biggest award of the event—the Outstanding Apprentice of the Year.

Peter has shown great dedication and skill across his engineering apprenticeship.

TAFE Queensland - SkillsTech General Manger, John Tucker, hosted the event on the night, and labelled the event as an important occasion to celebrate greatness in training.

“The annual Apprentice Awards are a great opportunity to celebrate the dedication and success of the next generation of local tradespeople and I’d like to congratulate all of the finalists on their achievements,” Tucker said.

“TAFE Queensland is proud to help so many Queenslanders successfully start their trade careers and provide our state’s construction industry with a much needed pipeline of skilled workers for the future.”

Guy Brooks (Training Manager, Weld Australia) and Geoff Crittenden at the TAFE Queensland Apprentice Awards.

25

Weld Connect | December 2022

WELD AUSTRALIA’S EXAM CALENDAR Do you need to book an exam through WeldQ? We’ve made the process even easier, with our new exam calendar, which can be accessed via the WeldQ homepage. The calendar includes all exam dates for 2022, making planning ahead as simple as possible.

Just some of the upcoming exam dates include: • Tuesday 24 January: IIW IWE and IWT EA4 and TA4 Online Exam • Tuesday 21 January: Re-sit Online Exam (All Qualifications) • Thursday 2 February: National Welding Supervisor Exam ( Paper A-B1 and B2) • Tuesday 7 February: IIW IWI-B and IWI-S WTE S and WTE B Online Exam • Tuesday 28 February: Re-sit Online Exam (All Qualifications) • Thursday 2 March: National Welding Supervisor Exam ( Paper A-B1 and B2)

L to R: Geoff Crittenden, Peter Fontaine (Winner of the Engineering and Manufacturing Apprentice of the Year) and Kevin Roos (Business Manager, Engineering, TAFE Queensland).

MELBOURNE POLYTECHNICS ‘MINI MAKER FARE’ Weld Australia recently participated in the ‘Mini Maker Fare’ at Melbourne Polytechnic’s Greensborough Campus.

The Mini Maker Fair is an annual event that is attended by hundreds of primary students to engage in handson activities, make things and learn new skills. The event is supported by different community and industry partners each year and the style of engagement is varied. Some past examples are Telstra providing one of their Cruzr robots for the 2019 event and Yarra Plenty Regional Library running an electronic circuits activity using play dough at the 2018 event.

Tania Martin (Manager, Advanced Welder Training, Weld Australia) was on-hand, demonstrating welding with the Soldamatic augmented reality simulators. The students all enjoyed training their hand at welding, and all feedback from the event has been very positive.

Melbourne Polytechnic has been delivering practical and professional education to the northern suburbs of Melbourne for over 100 years. From NMIT, Preston College of TAFE, Collingwood College of TAFE, Northern Metropolitan College of TAFE, to our beginnings as Collingwood Technical School, and Preston Technical School.

Today, Melbourne Polytechnic offers a broad range of innovative training and higher education programs providing knowledge and skills needed for challenges in a competitive marketplace. With a focus on practical experience and theoretical learning in Melbourne Polytechnic’s modern facilities, programs have been designed and developed with industry consultation to ensure the best employment outcomes.

26

Weld Connect | December 2022

ADVERTISE WITH WELD AUSTRALIA Take advantage of our advertising packages. With a multi-channel marketing approach, you can reach as big an audience as possible. Plus, Weld Australia members get a significant discount on all our advertising rates.

Diamond Package: $6,000 If you have a ground-breaking story to tell, or a brand new product or service to launch, take advantage of our ‘Diamond Package’ for maximum impact and exposure: 1. Australian Welding: 1 x full page inside cover ad 2. Weld Connect: 1 x third of a page front cover ad 3. Weekly Wrap-Up: 1 x right-hand sidebar advert (420px x 250px) in 4 x editions 4. 3 x social media posts Gold Package: $5,000 Our ‘Gold Package’ provides great value for money, as well as fantastic impact and exposure: 1. Australian Welding: 1 x full back cover advert 2. Weld Connect: 1 x back cover advert 3. Weekly Wrap-Up: 1 x right-hand sidebar advert (420px x 250px) in 3 x editions 4. 2 x social media posts Silver Package: $4,000 Our ‘Silver Package’ provides great value for money, as well as great impact and exposure: 1. Australian Welding: 1 x full page advert 2. Weld Connect: 1 x full page advert 3. Weekly Wrap-Up: 1 x right-hand sidebar advert (420px x 250px) in 2 x editions 4. 1 x social media post

Weld Australia would like to congratulate the following people on becoming newly qualified over the last month.

AS 1796 CERTIFICATES 1-9 • • • • • • • • • • • • • • • • • • • • • • • •

Adam Brown (Cert 10) Alston James (Cert 8F) Ashley Whitby (Cert 8F and 9) Brandan Wootton (Cert 10) Cameron Maclachlan (Cert 10) Daniel Brand (Cert 1, 1E, 3 and 3E) Daniel Knepscheld (Cert 10) Evyenia Kontakos (Cert 10) Harley Delhaas (Cert 9) Hoang Khanh Le (Certs 2, 4 and 5) Iain Miller (Cert 10) Jake Bongers (Cert 8G) James Hurle (Certs 5 and 7) Jamye Monaghan (Cert 10) Kaleb Muller (Cert 8G) Lloyd Thompson (Cert 10) Maddi Cornwall (Cert 7) Matthew Farr (Cert 10) Nathan Fielke (Cert 8G) Ryan Paparusis (Cert 1, 1E, 3 and 3E) Sam Lagana (Cert 8G) Sean Mulholland (Cert 10) Tony Kissell (Cert 7) Trevor Winton (Cert 9)

AS 1796 CERTIFICATE 10 • • • •

Gavin Ainsworth Justin Lindell Mark Seiter Michael Todd

AS 2214 • •

Charlton Mendes James Beal

IIW IWS •

Timothy McRae

IIW IWE

DOWNLOAD THE MEDIA KIT 27

Weld Connect | December 2022

• •

Ali Sarabi Antonius Vidot

Australian Standards are increasingly placing more importance on the role of Welding Engineers. In fact, predictions show that an International Welding Engineer (IWE) qualification will be in increasingly high demand over the coming years. This course can help boost your earning potential and job stability. With four modules and a practical session, this course will kick off on Thursday 16 March 2023. If you’re keen to kick-start your welding career, start with this course.

The Welding Fundamentals online course gives professionals an understanding of some of the issues that may arise with welded components, and provides an overview of welding processes, weld defects, testing and welder qualification as required by various Australian and international Standards. This highly engaging online course will start on Wednesday 8 February 2023. It might not be until next year, but the course is already filling fast. Don’t miss out—book now!

ENROL NOW

ENROL NOW

An AS1796 Welding Certificate is—by far—the most well known and requested welder certification in Australia. It is referenced in both structural steel and pressure equipment Standards.

The training covers topics like safety, welding terms and symbols, heat treatment and control, cutting and gouging, arc conditions, welding procedures and regulations, welding equipment and so much more.

This course is run across eight weeks, with 15 sessions delivered online, live via Zoom. Participants have the opportunity to ask questions, in real time, of our experienced welding technology trainer.

Kicking off on 23 January 2023, there are limited spots available. Enrol online today to avoid disappointment.

ENROL NOW 28

Weld Connect | December 2022

An International Welding Specialist (IWS) qualification will expand your career. This IIW qualification is advised for all Responsible Welding Coordinators, and recommended in AS/NZS ISO 3834 and ISO 14731.

An IWS understands the factors that influence welding quality and conditions, how to oversee welders effectively, and the variables that help to maximise site productivity. This highly engaging online course will start on Monday 27 February 2023. It might not be until next year, but the course is already filling fast.

Don’t miss out—book now!

IWT often manage, supervise, and oversee all company welding activities at a highly technical level. As such, you will likely have overall responsibility for the quality and coordination of all on site welding activities – a strong bonus for your resume. An International Welding Technologist (IWT) qualification is a strongly advised qualification for Responsible Welding Coordinators, and highly recommended in both AS/NZS ISO 3834 and ISO 14731. With four modules, this course will kick off on Thursday 16 March. Places are limited, so be sure to book early to avoid disappointment.

ENROL NOW

ENROL NOW

A Welding Supervisor qualification enables you to improve your company’s bottom line. Welding Supervisors often make valuable contributions to four of the most important metrics in welding operations: quality, cost, productivity and safety.

Not surprisingly then, this qualification can boost your earning potential and job stability. Plus, the qualification demonstrates to employers that you are dedicated to continually learning and growing in your field—qualities that are essential for success in team leadership roles, or for more complex jobs.

Kicking off on 7 March 2023, there are limited spots available for this course. So, be sure to enrol online today to avoid disappointment.

ENROL NOW

29

Weld Connect | December 2022

ENROL IN A FUSION WELDING COURSE TODAY Enrol in a fusion welding course through any Advanced Welder Training Centre below.

ACT Canberra Institute of Technology cit.edu.au 81 Mildura Street, Fyshwick

There are two fusion welding courses that adhere to ISO 9606 Qualification test of welders on Training.gov.au. This is the authoritative source of nationally recognised training and Registered Training Organisations (RTOs). These two courses were developed in Victoria in 2018 and use augmented reality welding simulators as a key component of the training.

TRANSITION WORKERS To be awarded a certificate for the Course in Fusion Welding to AS/NZS ISO 9606 for Transition Workers, you must successfully complete seven units of competency (four core and three elective). Core units: • Simulate fusion welding processes using augmented reality equipment • Identify welding processes, safe welding practices and use of hand and power tools • Interpret and apply AS/NZS ISO 9606 for fusion welding processes • Perform fusion welding procedures to meet the procedures of ISO 96061 (Steels – carbon steels) EXPERIENCED WELDERS To be awarded a Statement of Attainment for the Course in Fusion Welding to AS/NZS ISO 9606 for Experienced Welders, you must successfully complete three units of competency (one core and two elective). The core unit is: Interpret and apply AS/NZS ISO 9606 for fusion welding processes.

FURTHER INFORMATION For further information, contact: training@weldaustralia.com.au

Queensland TAFE Queensland tafeqld.edu.au • Cairns Campus: Gatton, Newton, Eureka and, Wilkinson Streets, Manunda •

Townsville (Trade Centre Bohle) Campus: 763 Ingham Road, Bohle

•

Toowoomba Campus: 100 Bridge Street, Toowoomba City

•

Ashmore Campus: Benowa Road & Heeb Street, Ashmore

•

Nambour Campus: 91 Windsor Road, Burnside

•

Bundaberg Campus: 118 Walker Street, Bundaberg West

Tasmania Tasmanian Minerals and Energy Council tasminerals.com.au 13 Wellington Street, Burnie Victoria Box Hill Institute boxhill.edu.au 465 Elgar Road, Box Hill, Melbourne Bendigo TAFE bendigotafe.edu.au 23 Mundy Street, Bendigo Federation University federation.edu.au Lydiard Street South, Ballarat

30

Weld Connect | December 2022

31

Weld Connect | December 2022

For further information, contact Disha Mistry on d.mistry@weldaustralia.com.au