2015 Auspower Leds Brochure

REPLACEMENT COMMERCIAL DOWNLIGHT LED FITTING

COMMERCIAL DOWNLIGHT

These AUSPOWER LEDS fittings come with their own LED Lamps and are designed for entry foyers, meeting rooms or larger convention areas plus a wide variety of commercial installations. Fully EMC approved to not interfere with electronic components and IT equipment.

• • •

AUSPOWER LEDS Pty Ltd ACN: 151 870 450

Various sizes and colours available and can be custom manufactured to suit client’s requirements Have separate driver that can be easily serviced or replaced Suitable for high ceilings and dimmable with commercial type dimmers

Showroom / Office: 1 Adina Court, Tullamarine, Victoria, 3043 Phone: (03) 9310 5780 Email: info@auspowerleds.com.au Web: www.auspowerleds.com.au

For more technical information, please refer to our website.

REPLACEMENT FLOODLIGHT FITTING FLOODLIGHT

AUSPOWER LEDS offers a direct 240 Volt replacement floodlight fitting with its own customised LED Lamp. Can be utilised in residential entertainment, poolside or garden areas plus commercial applications.

• • • •

No warm-up time, instant bright light Available in five sizes – 10, 20, 30, 50 and 80 Watt Tough weatherproof aluminium housing with mounting bracket and connection flex Suitable for security, car park and truck loading bays

For more technical information, please refer to our website.

REPLACEMENT HIGH BAY LED FITTING The AUSPOWER LEDS high bay fitting is a traditional factory or commercial unit with its own built-in customised LED Lamp. Half the energy costs of currently utilised mercury vapour units.

• • • •

Please feel free to contact us at the details below with all your enquiries.

Three reflector hat models available – short alloy, Perspex and traditional full alloy No warm-up time, instant bright light Designed to operate between eight and ten metres above ground or floor level Supplied with plug top, two metres flex, hanging eye bolt for suspension mounting with jack chain

For more technical information, please refer to our website.

HIGHBAY FITTING

MORE THAN 4 DECADES EXPERIENCE IN THE LIGHTING INDUSTRY. Proudly Australian Owned Locally designed and manufactured LEDs

AUSPOWERLEDS AUSPOWER LEDS team have a solid electrical industry background, designing lighting projects as well as installing them in residential, commercial and industrial applications for 40 years.

Listed below are many of our products which you will find will fit most existing fittings.

New to the AUSPOWER LEDS range are the GR63C and ER63E LED Lamps that are slightly larger than the GR50C LED Lamps. They are brighter than the GR50C and 50 Watt halogens and easily installed in a wide variety of applications.

You only will have to replace the lamp and not the complete fitting to upgrade to LEDs.

GR63C

• • •

E: info@auspowerleds.com.au W: www.auspowerleds.com.au

For more technical information, please refer to our website.

GR50C

• • • •

The EBH1 is a 13 Watt lamp that replaces 100 Watt incandescent globe and 18 Watt florescent-ballast units The larger EBH2 lamp consumes the same amount of power and operates at a similar 48 degree Celsius Both lamps are lightweight and easily installed in new and existing fittings Four different variants available, however AUSPOWER LEDS can produce larger units to meet consumer needs

EBH1

EBH2 WITH FITTING

For more technical information, please refer to our website.

FITTING: GR63F

• • • GR50C WITH FITTING

• •

LED REPLACEMENT LAMP: GR50C

White and brushed silver fittings are available to suit GR63C lamps installations Round, square and moveable gimbal variants available to replace 50 Watt halogens Lightweight aluminium construction with spring clips for easy fitting in cavity ceilings No ceiling cones or hats required due to the operating temperature of the GR63C lamp No colour discolouration of the fittings due to lack of heat from the GR63C lamp Cut out size is 92mm for round and square fitting and 105mm for the gimbal fitting

The GR50C LED Lamp is an energy saving replacement for normal halogen units. They can be fitted in all domestic and commercial buildings by simply installing them in existing 50mm halogen fittings.

For more technical information, please refer to our website.

•

EP38 WITH FITTING

• • • • •

GR50C LED Lamp is a direct 240 Volt lamp with no transformer that is easily installed in standard 50 Watt halogen fittings Over 80% saving in power consumption compared to equivalent halogens Consumes a mere 7 Watts of power compared to 50 Watt halogen and 12 Watt transformer low voltage units Operate at a safe and low temperature of 48 degree Celsius Three bright clean white light colour lamps with 40,000 hour life span GR50C LED Lamps are easily installed in domestic, hospitality, commercial and industrial applications where 50mm halogens are utilised

For more technical information, please refer to our website.

GR63C WITH FITTING

LED REPLACEMENT LAMP: EP38 AUSPOWER LEDS designed the EP38 LED Lamp as a direct replacement lamp for all types of exterior or interior Par 38 spot lamp fittings. Weatherproof and easy to screw into new or existing outdoor sensor security light fittings.

• • • • EP38

Consumes only 7 Watts and offers over 95% power saving compared to equivalent 150 Watt Mirror-backed floodlight Low operating temperature of 31 degree Celsius Shock resistant, shatterproof and lightweight compared to 150 Watt lamp Suitable for downlight, track light, security, entertainment and poolside lighting applications

For more technical information, please refer to our website.

EBH2

REPLACEMENT LED TUBE: AT10/1200

Designed to suit all types of decors the AUSPOWER LEDS GR63F range of fittings are of the highest quality and easily installed. Each fitting comes with its own terminal box for direct connection to 240 Volt wiring.

Ledz Lite Up Pty Ltd T/A Auspower Leds ABN 37 151 870 450

The GR63C and ER63C are direct 240 Volt LED Lamps with no heat generating transformer Consumes only 7 Watts, run at 48 degree Celsius ER63C lamp has a E27 base and the same specifications as the GR63C GU10 base model Easy to control light brightness with 500VA dimmer Range of round and square fittings available to suit down light or spot light installations Ideal for solar powered applications

The EBH LED Lamps designed by AUSPOWER LEDS for overhead enclosed fittings in outdoor applications.

Replacement lamps for bulk head, side entry, footpath street light fittings plus airport and mining conveyor systems. Widely used for exterior bunker type domestic lighting.

ER63C

• AUSPOWER LEDS is Australian owned, designing and manufacturing their own direct 240 Volt lamps while overseas manufacturers and suppliers are not producing electrically suitable replacement lamps and appropriate fittings to suit our building designs.

• • •

AUSPOWER LEDS technical department have been developing a wide range of LED lamps for over 10 years. The LED lamps and fittings are designed in Melbourne to meet Australian standards and conditions. All lamps are tested in official laboratories to ensure that they receive Australian electrical safety standards, AS/NZ3100, EMC and NATA accreditation. The EMC approval allows the AUSPOWER LEDS lamps to be utilised in medical, dental, electronic and IT applications due to lack of electrical interference.

REPLACEMENT LED LAMP: EBH1 & EBH2

REPLACEMENT LED LAMP: GR63C & ER63C

AUSPOWER LEDS designed the AT10 series replacement LED tubes have been safety tested for Australian conditions to suit most conditions. The LED Tubes do not have live power pins but have flyleads for easy connection to either pin type fittings or weatherproof applications which do not require fittings. The LED tube connects easily to the terminals of the fittings and existing internal components not utilised, enabling fluorescent tube to be re-installed as is.

•

•

•

The AT10/1200 is a lightweight 15 Watt LED tube that was designed to replace energy consuming 48 Watt florescentballast unit Cool 31 degree Celsius operating temperature allows LED tubes to be installed in meat, poultry and seafood display cabinets AUSPOWER LEDS specially designed weatherproof LED tubes can be exposed to rain and snow and are fitted easily

REPLACEMENT LED LAMP: AB60 & EB60 AUSPOWER LEDS AB60 and EB60 LED Lamps are a direct replacement for everyday 240 Volt light globes. Available in three colours, cool white, white and warm white they are offered with bayonet or screw-in E27 type bases.

• • • • • •

Dimmable with 500VA Dimmer 360 degree beam which results in no shadows from fittings Easily installed in existing light fittings and shades 40,000 hour life span Full safety C-Tick, AS/NZ3100, EMC and NATA accreditation Ideal for residential and commercial installations

For more technical information, please refer to our website.

•

with their supplied mounting clips The weatherproof LED tubes are being utilised by poultry farmers, meat abattoirs, vegetable growers, dairy product producers, mining and transport industries

For more technical information, please refer to our website.

AB60