XL Attachments

YOUR PARTNER IN FORAGE & LAND

BALE HANDLING BUCKETS CUTTERS & SLICERS BUCK RAKES PALLET FORKS

WELCOME to the XL Attachments Product Guide.

At Webbline our range of Agricultural and Construction machinery is supported by an extensive stock holding of spare parts and our factory-trained technicians ensure that the best performance is obtained from each machine.

In addition to our new machines, we have an extensive range of used machines available and hire machines for short or long term operations.

Please feel free to contact us to discuss your requirements.

The Team at Webbline.

WAIKATO BRANCH

ABOUT WEBBLINE FIELDING BRANCH

CANTERBURY BRANCH

Extensive knowledge and specialised advice, backed up by a range of spare parts and a dedicated service team make Webbline your best choice when you need attachments for your farming or construction equipment.

Under the XL Attachments banner, Webbline can offer products from industry-leading manufacturers and suppliers around the world, so we can provide the best equipment for your job.

Vern Malcolm Director SOUTHLAND BRANCH

2

0800 932 254 \ www.webbline.co.nz

Our Webbline team is a dedicated, professional and hard-working group of individuals, a number of whom have been with the company for decades.

Each is a trained specialist who can help you fulfil your requirements for your specific industry operation.

We work hard to create strong business relationships with our valued clients.

Stan Malcolm Director

Attachments

Servicing New Zealand wide

3

BALE HANDLING Goweil Double Bale Fork • Carry 2 round bales • 3 pt linkage/Euro hitch standard • Carry one square bale • Transport tine guard High back frame option to carry 2 square bales.

Goweil DTR The first transport fork, mounted on the hydraulically displaceable transport cart, is used to pick up the bale; while the additional hydraulic system lifts the bale up to a height of up to 30cm.

The second bale can then be loaded without having to set down the first bale. Since the first bale is lifted up when the second bale is loaded, the bale is protected from damage.

Once carted to the storage location, the bales can be tipped allowing them to be stored on their ends.

Single bale versions available.

Goweil Round Bale Clamp The Goweil’s unique design ensures that it clamps 3/4 of the bale and not just the sides.

This design means that the bale is able to be held very gently without undue pressure on the bale, minimizing any overstretching of the plastic from high pressure points.

The design of these bale grabs also ensures the bale is very close to the pivot point on the loader, minimizing stress on the front axle of your tractor.

The Goweil Clamp is used by many large contractors moving 1000’s of bales per year and is proving to be one of the most robust bale clamps available on the market.

• Euro hitch • 3pt linkage option • Small bale insert option * Other loader brackets available on request

4

0800 932 254 \ www.webbline.co.nz

BALE HANDLING Goweil Square Bale Clamp • Even pressure on the bale • Holds bale close to front-end loader • Strongly built • Easy to attach • Will pick up a 2 metre long square bale with ease • Suit 3 x 3 & 4 x 3 bale.

• Euro hitch • 3pt linkage option

* Other loader brackets available on request

XL Bale Clamp The bale clamp for the front loader has excellent durability, making it perfect for working in a variety of conditions. The bale clamp will prove itself in every farm, performing tasks such as: • unloading • transport • loading • Euro hitch * Other loader brackets available on request

XL Square Bale Clamp Mounted to the front loader, the square bale grabber is specialized for square and rectangular bales, but is also suitable for round bales. Off the farm, it is often used in the pulp industry or waste processing.

• Operating width 620mm – 2050mm • Euro hitch Perfect for: • transport, • loading, • unloading, * Other loader brackets available on request

Servicing New Zealand wide

5

BALE HANDLING Wilson Double Bale Lifters The double folding bale forks allows the operator the flexibility to cart wrapped or unwrapped bales with ease.

The large diameter tubes ensure no damage is done to the wrap. These can be mounted on the front linkage, rear linkage, or used in combination with a trailing bale transporter to further enhance efficiency. When depositing the bales, they can be gently tipped on to their ends to prevent any damage to the baleage wrap.

Webbline Balemaster Bale Clamp • Euro hitch • 1.8m wide opening • Ideally suited for round bales and 3x3 square bales

Goweil Film Carrier Go out prepared with your tractor, baler and wrapper, increase your baling efficiency with a Goweil Film & nett holder that can carry 16 rolls.

Goweil Front Linkage Film Storage Holder - Hydraulic tilting frame Popular for transporting 16 rolls of film or 14 rolls of film and 2 rolls nett.

• 2340m wide

6

0800 932 254 \ www.webbline.co.nz

BUCKETS NC Bucket Sweeper This powerful bucket mounted sweeper provides a material handling bucket that can be converted into a versatile sweeper collector unit. Pick up lugs are welded to the bucket and sweeper connected using a simple `quick attach system`. Sweeping/ collection is recommended in reverse direction. The sweeper can be supplied with brackets to suit various handlers/loaders or fork frame.

• 2.7m wide • Buckets supplied as standard with hardened wear edge.

• Standard mixed bristles, half polypropylene, half steel.

• All polypropylene available on request.

• Hydraulic driven sweeper.

• Hydraulic motor is mounted on top of sweeper away from damage.

• Drive to the rotor is via a reliable chain drive which has all the added benefit of reducing the machine width and allowing the operator to get close to the wall/kerb than a direct drive machine.

MDE Buckets • High Tip – capacity 2.0m3 to 5.0m3 • Grain Bucket – capacity 2.5m3 to 4.0m3 • Multi Purpose – widths 2.3m to 2.6m • High Capacity Multi-Purpose – capacity 2.0m3 to 3.0m3 • A variety of different loader/telehandler mounts available

MDE Grapple • Rounded Curved Back • Hardened Steel Cutting Edge • Hardox Grab Teeth • Twin Hydraulic Ram • Hardened Steel Pivot Bushes • Sizes 2.3m (2.1m3), 2.4m (2.3m3), 2.8m (2.8m3) or 2.8m (4.1m3) • A variety of different loader/telehandler mounts available

Servicing New Zealand wide

7

BUCKETS XL Grapple Bucket • 1.8m – 2.5m widths • 1.00m3 – 2.0m3 capacities The distinguishing feature of the “Grapple Bucket” is the rugged and robust construction. Grapple buckets are a multipurpose tool that can be used for unloading silage, maize and can pick up round & square bales, as well as all types of bulk material.

A variety of different loader/telehandler mounts available.

XL Buckets • 1.2m3 – 2.85m3 capacities • Grain Buckets • Construction Buckets • Multipurpose Buckets • Mini Buckets • Grapple Buckets A variety of different loader/telehandler mounts available.

8

0800 932 254 \ www.webbline.co.nz

CUTTERS & SLICERS BvL Megastar Block Cutter At the heart of the Megastar operation is a unique and patented double blade system which allows for a particularly effortless, smooth and clean cut. This perfect cutting surface ensures the storage density of the silage and helps reduce fodder costs significantly; no oxygen will reach the interior of the silage.

The V-LOAD Cutter Megastar sets itself apart with its exceptionally sturdy and reliable design. Made of fully hardened special steel, the transversal cutting unit is equipped with two counter-acting blades. This feature produces an exceptionally smooth, yet powerful cut. The cutting bar is nearly maintenance-free and is particularly well suited for demanding professional applications.

BvL Shear Grabs The extremely robust and powerful range of BvL shear grabs ensures your silage stack face is well sealed.

Having a well-sealed silage face assists in preserving the quality of your silage through the prevention of secondary fermentation. The unique design of the BvL shear grabs with close tyne spacing and enclosed cutting frame helps to prevent loss during loading your mixer/silage wagon • 1.7m – 2.0m width • 0.95m3 - 2.25m3 capacity • Three-piece replaceable knife blade

Servicing New Zealand wide

9

CUTTERS & SLICERS Goweil Round Bale Slicer With cutting open & removing of plastic & net from round bales being the curse of feeding out this simple design can be done without leaving your tractor seat.

Before cutting the bale the 8 hooks grip the film and the net the full width of the bale and hold it securely.

This is especially effective and makes this job a pleasure when loading into Feeder and Mixer Wagons.

Hydraulics are operated from the 3rd service valve and no extra valving is required.

Grip the bale – Slice the bale – Deposit the plastic Save on time – Save on Fuel – Save on Labour

MDE Koala Tree Shears Koala Tree Shears by MDE come in four models to suit excavators 1.5 – 30 tonne. Koala Tree Shears are made from high strength steel which ensures strength, resilience, and durability. The Koala tree shear range comes armed with a replaceable Hardox wing-style blade which can be easily replaced when worn or damaged. The unique design of the Koala Tree Shear allows the operator to grip the tree whilst being cut and allows the operator to deposit the tree in a safe position.

• K150 - 6” cutting capacity • K200 – 8” cutting capacity • K300 – 12” cutting capacity • K400 – 16” cutting capacity

K400 Shear

10 0800 932 254 \ www.webbline.co.nz

Hardox Blade

OTHER ATTACHMENTS Webbline Pallet Forks • Euro Loader Mounts • Adjustable Width • 2000kg Capacity

MDE Falcon Push Off Buck Rake The Falcon range of push off buck rakes were designed for powerful tractors and loaders to efficiently handle chopped material. The market leading Falcon range features a robust push off gate, removable side tynes, rounded tine wear shoes & replaceable chassis wear plates.

Key Features • Powerful Twin Hydraulic Rams c/w Equalizing Valve • Double Side Tynes • Heavy duty frame • Hardox Steel Tynes • Rubber Buffer Pads To Prevent Push Off Gate Wearing Fork Frame • Working widths from 2.7m – 4.3m Options • Lighting Kit • Road Transport Guard • Loader Mounts

MDE Warrior Buck Rake The Warrior range of buck rakes are known as the contractors choice & are designed for large & powerful loaders. This range was designed by taking into consideration experienced operators opinions and ideas on how a buck rake should be built.

Key Features • 350mm Tyne Centres (easy flow of forage through the tynes) • 1.8m long 50mm Hardox steel tynes • High tensile steel pivot bushings • Heavy Duty One Piece Frame • Hydraulic Locking valves for Hydraulic Wing Cylinders • 2.9m transport width • 3.6m, 4.4m or 5.0m working width Options • Lighting Kit • Maize Blade • 2.13m long tynes • Loader Mounts Servicing New Zealand wide

11

YOUR PARTNER IN FORAGE & LAND

New Zealand 0800 932 254 \ www.webbline.co.nz webblineltd

@webblineagltd

DISCLAIMER: Webbline Agriculture Limited base all costings, savings and information in this booklet as indicative ONLY and to their best knowledge of the industry at the time of printing. Webbline Agriculture takes no responsibility or liability for any discrepancies that may arise and advise the customer to seek independent professional advice to ensure that they are fully satisfied with their decision.