1 minute read
Here are the following steps for MSRM US302 Extender setup
● Connect the extender to a power outlet close to your MSRM US302 Extender setup
● As soon as the power LED illuminates, the extender is ready.
Advertisement
● Go to the WiFi settings on your device (phone, laptop, etc.).
● Connect to the extender's default network by searching for it (for example, "MSRM_EXT").
● Launch a web browser (such as Firefox or Chrome).
● Enter "192.168.10.1" into the address bar.
● Enter the default username and password when prompted (consult the manual).
● This leads you to the settings page for the extender.
● Look for a guided setup option or setup wizard.
● To begin the setup procedure, adhere to the instructions.
● The extender will look for WiFi networks that are accessible.
● Pick out of the list your primary WiFi network.
● When prompted, enter the password for your WiFi network.
● You can either customise the extended network's name and password or leave them the same as your primary network.
● Save your preferences, then let the extender take effect.
● During this procedure, it might reboot.
Things to Take Care of During MSRM US302 Extender Setup:
● Pick a location that is centrally located between your router and signal-poor areas. Avoid anything that could block the signal, such as walls and gadgets.
● Make sure the extender is powered on and properly plugged in. In your device's Wi-Fi settings, join the extender's default network.
● To access the setup page for the extender, enter the correct IP address. If necessary, refer to the manual.
● Modify the default login information to stop unauthorised access. Make sure the extender and your main network have secure passwords.
● Select the appropriate main network to extend from the list during setup.
● Before or after setup, check for firmware updates. Performance and security can both be improved by updated firmware.
● Put the extender in a location where your router's signal is strong enough to reach it.
● Choose whether you want the extender network's SSID and password to match those of your primary network or to be different.
● After changes, allow the extender to restart. This guarantees that settings are applied.
● Test the signal strength of the extended network in previously underserved areas after installation to ensure better coverage.
● For future use, keep a record of your settings and login information.
● You can ensure a successful and efficient MSRM US302 Extender setup that will give you improved Wi-Fi coverage and connectivity by keeping these factors in mind.
