1 minute read
4.1 Coordinate System
from CypCutLaser
CypCut Laser Cutting Control System
group will not be processed.
Advertisement
If you just would like to perform automatic sort for part of the graphics without influencing other parts, you can also complete it through grouping. Please select the graphics needed to be sorted automatically, click “Group”, and then click “Group” with the right key, lastly select “Sort in Group”.
IV. Work Control
CypCut is a set of software combining design and work control together. As mentioned above, all the graphics and the parameters can be prepared without the machine tool, the files can be saved after finishing all the design, and then they can be copied to the machine tool for processing.
4.1 Coordinate System
The “Model Coordinate System” used in the graphical design has no relation with the machine,
and its zero point is marked by “ ” on the screen. However, the coordinate system used in the processing is related to the operating status of the machine. The correspondence of these two coordinate systems is shown as below.
