L
fo
r
im
antable l p
po rt s
New
V
AS Acce ss or C ie s
U
A
R
AC
SS E C
perfusafe2 Maximum safety Minimal profile
Maximum safety perfusafe2 is a safety infusion device with a Huber bevel for use with implantable ports. perfusafe2 prevents needlestick injuries caused by the needle rebound effect.The needle is automatically directed into a safety cage offering protection from accidental needlestick injury, with no change in the handling technique.
Intuitive No change in technique
Prevents needlestick injury By capturing the needle
CT-RATED For high pressure injections
k
clic
Did you know
?
Needlestick injuries and infections
• 1 .2 million needlestick injuries to healthcare workers occur each year in Europe. •G lobally, 2.5% of HIV infections and 40% of hepatitis B and C infections among healthcare workers are caused by needlestick injuries. • I n 2010, the EU Commission recommended providing safety devices to all healthcare workers by 2012. Commission of the European Communities, Council Directive COM (2009) 577 final
2
perfusafe2 Optimal use Standard and custom sets, including gauze, drapes, gloves, gown, cap, mask, dressings, etc. are available for perfusafe2 placement. These sets allow you to follow the recommendations for maximum barrier precautions.
arent Transp device itor to mon re ctu the pun site
Easy grip soft grooved wings
Soft and flat on the skin for patient’s comfort
Sand-blasted Huber bevel heel for minimal coring
Foam pad For patient comfort Marked clamp Gauge & CT flow rate
Lower profile
Easy to dress
Comfortable For the patients
For the nurses In the market
3
Choose your perfusafe2 Needle length
Indications
15 mm, ”
Superficial port placement or patient with a low BMI
20 mm, ”
Standard length needle
25 to 30 mm, 1 to ”
Longer needles for a deeper port and patients with a higher BMI
Needle Gauge
Indications
19 G
Blood products
20 G
Lipid products: TPN...
22 G
Non-viscous infusion: antibiotics, fluids...
Care
Use
• Monitor the puncture site every day. • Change the foam pad and dressing if soiled.
•C arefully clean the hub or the integrated needle-free connector with alcohol each time you access perfusafe2.
• Replace at least every 7 days.
• Check the blood return and catheter patency. • Inject or connect the infusion line. • F lush with the push-pause technique with 10ml saline or with 20 ml saline after blood or nutrition. • Lock as per your hospital policy. • Complete the patient log book.
perfusafe2 is available
• with a straight extension line • or a Y extension line • with or without autoflush®
autoflush®
autoflush® is a closed needlefree device. autoflush® provides a 0.03 ml positive displacement of the lock solution. autoflush® eliminates any blood reflux into the catheter lumen, preventing catheter occlusion.
4
perfusafe2 Instructions for use • Placement
1. P rep the patient with aseptic technique. Change gloves. 2. After priming the perfusafe2, lift and hold the upper wings, remove the protector.
3. H old the access port between two fingers and insert perpendicular into the septum until you gently feel the reservoir bottom.Vary the puncture sites to avoid skin problems.
k
clic 4. C heck for blood return and flush with the pushpause technique with 10 ml saline. 5. P lace the foam pad under perfusafe2 and cover with a semi-permeable transparent dressing.
• Withdrawal
1. Flush perfusafe2 with 10 ml saline. 2. L ift and hold the upper wings, hold the port by placing two fingers over the lower perfusafe2 wings.
3. P ull the upper wings upwards while maintaining the port between the lower wings and injecting saline. 4. W hen you hear a “click”, the needle is secured and you can safely dispose of the needle in a sharp box. 5. Cover the puncture site with a standard dry dressing.
5
References Gauge
Ext. Ø
Length
With
5249.115
19 G
1.1 mm
15 mm
5249.116
19 G
1.1 mm
15 mm
5249.120
19 G
1.1 mm
20 mm
5249.121
19 G
1.1 mm
20 mm
5249.125
19 G
1.1 mm
25 mm
5249.126
19 G
1.1 mm
25 mm
5249.130
19 G
1.1 mm
30 mm
5249.915
20 G
0.9 mm
15 mm
5249.916
20 G
0.9 mm
15 mm
5249.920
20 G
0.9 mm
20 mm
5249.921
20 G
0.9 mm
20 mm
5249.925
20 G
0.9 mm
25 mm
5249.926
20 G
0.9 mm
25 mm
5249.930
20 G
0.9 mm
30 mm
5249.715
22 G
0.7 mm
15 mm
5249.716
22 G
0.7 mm
15 mm
5249.720
22 G
0.7 mm
20 mm
5249.721
22 G
0.7 mm
20 mm
5249.725
22 G
0.7 mm
25 mm
5249.726
22 G
0.7 mm
25 mm
5249.730
22 G
0.7 mm
30 mm
5250.115
19 G
1.1 mm
15 mm
autoflush®
5250.120
19 G
1.1 mm
20 mm
autoflush®
5250.125
19 G
1.1 mm
25 mm
autoflush®
5250.130
19 G
1.1 mm
30 mm
autoflush®
5250.915
20 G
0.9 mm
15 mm
autoflush®
5250.920
20 G
0.9 mm
20 mm
autoflush®
5250.925
20 G
0.9 mm
25 mm
autoflush®
5250.930
20 G
0.9 mm
30 mm
autoflush®
5250.715
22 G
0.7 mm
15 mm
autoflush®
5250.720
22 G
0.7 mm
20 mm
autoflush®
5250.725
22 G
0.7 mm
25 mm
autoflush®
5250.730
22 G
0.7 mm
30 mm
autoflush®
autoflush®
autoflush®
autoflush®
autoflush®
autoflush®
autoflush®
With straight extension line
autoflush®
autoflush®
autoflush®
With Y extension line
6
Code number
perfusafe2
perfusafe2
with straight extension line
perfusafe2
with Y extension line and autoflushÂŽ
Standard set for placement of Huber needles Ref 96.90.0526
7
DB AIGU 14 251 E - 10/17
INTRAVASCULAR THERAPIES For further information, please contact: questions@vygon.com The specifications shown in this leaflet are for information only and are not, under any circumstances, of a contractual nature.
Vygon – 5, rue Adeline • 95440 ECOUEN • FRANCE Reception: +33 (0)1.39.92.63.63 – Service clients France: +33 (0)1.39.92.63.81 Export customer service: +33 (0)1.39.92.64.15 Fax.: +33 (0)1.39.92.64.44 • www.vygon.com
www.vygon.com