Astana

UKRAINIAN EXPOSITION ASTANA EXPO 2017 JUNE 10 – SEPTEMBER 10, 2017

ORGANIZED BY

The participation of Ukraine in the EXPO 2017 “Future Energy” International Exhibition, which will take place in Astana, is an opportunity to demonstrate to the world Ukrainian innovations related to energy efficiency.

Ukraine is a strong state, which during the past several years has adequately met all challenges which it faced in the energy sector. We have something of interest to businessmen and investors. We are reforming housing and communal services system, carrying out energy efficiency reforms, implementing European standards of energy use, restructuring the renewable energy sector. Today we are interested in attracting international partners and implementing joint investment projects in energy efficiency, renewable energy and alternative fuel sectors.

Ukrainian producers already have substantial achievements in this field. We are ready to propose to our international partners perspective joint projects concerning introduction of new energy efficiency standards as well as energy saving technologies.

The slogan of the exhibition – “Future Energy” – is deeply symbolic. Ukraine and the whole world strive for energy of new quality. More effective and accessible. Rational use of energy resources is strategic precondition for technical progress and development of the mankind.

I am convinced that such a respected international exhibition as EXPO 2017 will offer the world a new dimension of energy efficiency. Together we are able to respond to global challenges facing the world. I wish all participants fruitful discussions, successful negotiations and contracts.

Gennadiy Zubko, Vice Prime Minister – Minister of Regional Development, Construction and Housing and Communal Services of Ukraine

GOOD AFTERNOON! Today it is extremely important for Ukraine, as an honorary participant of EXPO 2017, to demonstrate its renewable energy potential and to interest and motivate potential investors to work in our country. Ukraine confidently follows a path on the way to implementing reforms. The country’s achievements are very convincing. Thus, it is natural that for the first time in 5 years we are presenting our official national stand at EXPO 2017.

For Ukrainians, participation in the EXPO 2017 “Future Energy” International Exhibition is an opportunity to establish constructive and close dialogue between governments, nongovernment organizations, companies and civil society regarding sustainable development of energy, reduction of greenhouse gas emissions and energy efficiency.

Our enterprises will demonstrate their high-level products and services in the sectors of engineering, as well as innovative design in the sphere of renewable and alternative energy.

We will demonstrate to participants from over 100 countries our best achievements in all areas of renewable energy: sun-, wind-, hydro-energy; we will show modern equipment and materials in the energy efficiency sector. We will share experience of growing energy plants, production of heat and electric energy from agricultural waste, etc.

All of this guarantees establishment of partnerships with leading international companies in the energy sectors.

Good luck! See you soon! #export Nataliya Mykolska, Deputy Minister of Economic Development and Trade, Trade Representative of Ukraine

1

DEAR EXPO-2017 PARTICIPANTS! It is a great honour for Ukraine to participate in a large-scale EXPO-2017 International Specialized Exhibition “Future Energy”.

Renewable energy development is a priority issue for the Government of Ukraine. According to international obligations of Ukraine and the National Renewable Energy Action Plan until 2020 our goal is to achieve 11% of energy produced from renewable sources in final energy consumption by 2020. Therefore we are improving the legal framework, creating favorable conditions for business and investors in this sphere.

In particular, in 2015 the Ukrainian Parliament adopted the Law of Ukraine 514-VIII on stimulation electricity production from renewable sources. Due to this Law “green” tariffs are fixed to EUR up to 2030 and are amid the highest in the world. In addition, the law has cancelled the requirement for local content and set up 10% premium for Ukrainian equipment usage. “Green” tariff is introduced for rooftop solar panels and wind turbines of private households with capacity up to 30 kW. As a result, 120.6 MW of renewable power capacities were put into operation in 2016. It is 4 times more than in 2015. Apart from that, the rooftop solar panels market has begun to grow rapidly in Ukraine.

Another important guarantee for investors who operate in heat production from renewable sources is a stimulating tariff for heat from alternative sources defined by the Law. All these and other legislative achievements and technologies will be presented at the National stand of Ukraine. On June 15, 2017 there will be also a business forum during the National Day of Ukraine.

Besides, at the Ukrainian stand you may find the integrated information searching system presenting Ukrainian companies working in renewable energy and their potential projects.

Ukraine is open for dialogue and investment! We look forward to cooperating with international partners. We are ready to discuss all possible entry points for investment and involve local authorities into cooperation.

Head of State Agency on Energy Efficiency and Energy Saving of Ukraine Mr. Sergiy SAVCHUK

2

DEAR FRIENDS! On behalf of the Ukrainian Chamber of Commerce and Industry I would like to greet the participants and guests of the EXPO 2017 “Future Energy” International Exhibition.

EXPO 2017 is a landmark event for the entire world. For the first time in many years, the exhibition theme is dedicated to alternative energy. Almost every country is interested in this subject today. Naturally, Ukraine also attaches an important role to it. In our exposition we demonstrate our achievements in the energy saving sector, renewable energy, in perspective programs and projects under the slogan “Energy of Creative People”.

Today, renewable energy projects can be boldly defined as drivers for development of the Ukrainian economy. Energy saving ideas are actively developed by business, supported and brought to life by ordinary citizens.

I am certain that EXPO 2017 will become one more impetus for the Ukrainian business community to plan and bring to life every new project, taking into account new world tendencies of development in this sector.

The Ukrainian Chamber of Commerce and Industry, as the manager for preparation for participation of Ukraine in EXPO 2017, and as the organizer of the national exposition, is doing all possible so that Ukrainian renewable energy projects become if not global, but at least visible and known to the world community. Our country this year demonstrates its main achievements in sun-, wind- and hydro-energy, in growing energy plants, in production of heat and electric energy from agricultural waste, etc.

We invite all partners from other countries to get more actively involved with creation of innovational business ideas in Ukraine, and on behalf of the Ukrainian Chamber of Commerce and Industry we promise maximum support in their implementation.

I wish the participants and guests of the exhibition and business meetings productive work, new fruitful business acquaintances and inspiration on their chosen path.

Gennadiy Chyzhykov, President of the Ukrainian CCI

3

WINDTECHNOLOGY

DEAR FRIENDS, COLLEAGUES, PARTNERS, PARTICIPANTS AND VISITORS OF EXPO-2017 “ENERGY OF THE FUTURE”!

I am pleased to welcome you on behalf of the company Fuhrländer Windtechnology, Kramatorsk, Ukraine.

Participation of our company in the Exhibition, dedicated to the energy of the future, is not accidental. After all, our company pioneered the birth of wind power engineering of multimegawatt class among the post-Soviet countries. May I take this opportunity to introduce our company briefly.

Fuhrländer Windtechnology LLC was founded in 2010. Modern factory was built at place of a half-ruined building within a short period of time, and for the first time ever licensed production of multi megawatt wind turbines under German technology was arranged among the post-Soviet countries.

Despite its youthful stage the Company has achieved great results: ››Licensed production of wind turbines with capacity 2.05, 2.5, 3.0 and 3.2 MW was set up. ››Seven wind parks in Ukraine and one wind park in the Republic of Kazakhstan was constructed in cooperation with the Management Company “Wind Parks of Ukraine”. ››Wind Park 45 MW in Yereymentau, the Republic of Kazakhstan, was constructed in cooperation with Kazakh partners. ››Local content in Ukraine is more than 50%. ››Production and Quality Management System implemented in the company was certified by TÜV Nord, ISO 9001.

A special company’s highlight is the realized project of a construction of the first wind park in the Republic of Kazakhstan. This project realization is resulted from cooperation of specialists and companies from different countries: Ukraine, the Republic of Kazakhstan, Germany, Poland, the Russian Federation. Fuhrländer Windtechnology LLC had used unique equipment able to operate at wide temperature range from -40º С to +40º С. Total installed capacity of WPS in Yereymentau is 45,1 MW. For the project, we have produced 22 WTGs with a single capacity of 2.05 MW each.

Fuhrländer Windtechnology LLC provides full range of activities and services related to wind energy business – designing, production, installation, dispatching, service, technical maintenance, foundation of a localized production, consulting.

Fuhrländer Windtechnology LLC in cooperation with the Management Company “Wind Parks of Ukraine” is able to propose realization of wind farm projects of any facility to their customers – from a single wind turbine to a “turn-key” multi megawatt wind farm.

Best regards, Director of Fuhrländer Windtechnology LLC Yevgeniy Nikitenko

4

FUHRLĂ„NDER WINDTECHNOLOGY LLC îœŁ Olexy Tykhogo str., 6 84306 Kramatorsk, Donetsk region, Ukraine

Fuhrländer Windtechnology LLC was founded in 2010. Modern factory was built at place of a half-ruined building within a short period of time, and for the first time ever licensed production of multi megawatt wind turbines under German technology was arranged among the post-Soviet countries.

Despite its youthful stage the Company has achieved great results: ››Licensed production of wind turbines with capacity 2.05, 2.5, 3.0 and 3.2 MW was set up. ››Seven wind parks in Ukraine and one wind park in the Republic of Kazakhstan was constructed in cooperation with the Management Company “Wind Parks of Ukraineâ€?. ››Wind Park 45 MW in Yereymentau, the Republic of Kazakhstan, was constructed in cooperation with Kazakh partners. ››Local content in Ukraine is more than 50%. ››Production and Quality Management System implemented in the company was certified by TĂœV Nord, ISO 9001.

WINDTECHNOLOGY

đ&#x;“ž +380 626 46 82 66 ✉ info@fwt.com.ua î?ś www.fwt.com.ua

A special company’s highlight is the realized project of a construction of the first wind park in the Republic of Kazakhstan. This project realization is resulted from cooperation of specialists and companies from different countries: Ukraine, the Republic of Kazakhstan, Germany, Poland, the Russian Federation. Fuhrländer Windtechnology LLC had used unique equipment able to operate at wide temperature range from -40º Х to +40º Х.

Fuhrländer Windtechnology LLC provides full range of activities and services related to wind energy business – designing, production, installation, dispatching, service, technical maintenance, foundation of a localized production, consulting.

Main parameters of wind power station in Yereymentau: ››Object: WPS Yereymentau 45 MW with possible extension to 300 MW ››Owner / Operator: “First Wind Power Stationâ€? Limited Liability Partnership – affiliated company of SC “Samruk-Energoâ€? ››Total installed capacity of WPS – 45,1 MW ››Quantity of wind turbines: 22 pcs ››Installed unit capacity 2.05 MW ››Rotor diameter: 93 m ››Tower height: 85 m ››Operating temperature: from -40Âş ĐĄ to +40Âş ĐĄ

5

Fuhrländer Windtechnology LLC in cooperation with the Management Company “Wind Parks of Ukraineâ€? is able to propose realization of wind farm projects of any facility to their customers – from a single wind turbine to a “turn-keyâ€? multi megawatt wind farm.

Our main products are: 1. Wind turbine generator WTU2.0 with rated power 2,05 MW 2. Wind turbine generator WTU2.5 with rated power 2,5 MW 3. Wind turbine generator WTU3.0 with rated power 3,0 MW 4. Wind turbine generator WTU3.2 with rated power 3,2 MW

“CMG UKRAINEâ€? LLC îœŁ Krasnoarmeysky Lane, 14, building. 7, office 22 Kyiv, Ukraine, 03039 đ&#x;“ą +380 98 589 92 25 ✉ ov@capmg.co.uk

CMG is an independent international group that provides a full range of services for doing business in Ukraine and abroad.

Clients of the CMG company are representatives of a wide range of business activities (trade and production, services, foreign trade activities), having different organizational and legal forms. To each of them an individual approach is applied in accordance with the actual changes and wishes of the client.

The main purpose of the work of Capital Management Group is to assist business in organizing an effective model of work, both on the domestic and foreign markets. Our specificity is the provision of full financial outsourcing which includes: ››Financial Outsourcing; ››Accompanying the import-export process and customs brokerage services; ››Preparation and submission of accounting and tax reporting, audit; ››Tax planning, optimization of financial flows; ››Participation in negotiations and transaction support; ››Protection of intellectual property rights.

Turning ideas into financial wealth.

6

LLC DNIEPER-UKRAINE Head office îœŁ Svobody square, 6, Kharkiv, 61022, Ukraine đ&#x;“ž +380 57 763 12 03 đ&#x;“ą +380 67 545 77 09

✉ office@dnieper.su î?ś www.dnepro-ukr.com.ua

Company DNIEPER-UKRAINE develops, produces and promotes know-how in the field of industrial instrument engineering, including ultrasonic and contactless flow meters DNEPR-7U in stationary and portable design to Ukrainian market under the dnieper TM.

Throughout its existence, the company became the leader in supplying devices for contactless flow measurement of any liquids (including sewage water in pressure and gravity collectors), heat transfer medium and heat energy in boiler houses and house basements, vapor (saturated and superheated), gas (industrial),air.

Today, the efficient metering organization of fuel and energy resources has a great importance for Ukraine, which is one of the main tasks for energy saving. Flow meters with ultrasonic sensors in removable design are urgent for today because: ››accuracy of meters measurement remains constant for the entire duration of operation (contactless with measurement medium); ››energy saving is achieved by measuring method at which any obstacles are absent in the path of measured flow (sensors are installed on the external pipeline surface); ››flow meter price does not depend on pipeline diameter and many other things‌

Ultrasonic flow meters DNEPR-7U are devices of general industrial designation with removable and cut-in options of sensors installation and can be used on facilities of housing and public services, central heating and power plant, atomic power plant, in chemical, oil-producing, metallurgy, food processing, pulp-and-paper and other branches of industry.

Production of company DNIEPER-UKRAINE is presented by the following devices:

7

STATIONARY ULTRASONIC FLOW METERS This type of devices should be used: ››In systems of cold and hot water supply. ››In systems, which use saturated (superheated) vapor, gas (air). ››In systems of heat supply and wastewater disposal.

Devices are made in solid and metal housings.

They are installed in selected place, easy-towork and certified in Ukraine.

PORTABLE ULTRASONIC FLOW METERS. Devices are produced in several types: with embedded notebook computer – for full, extended and partial audit, metering and volume flow control of different liquids types (water, oil, petrol, oil residue and gasoline) in systems of water, gas and heat supply and wastewater disposal.

PUBLIC JOINT STOCK COMPANY

DONBASENERGO îœŁ 34 A Predslavynska Str., Kyiv, 03150, Ukraine đ&#x;“ž +380 44 290 97 07 ✉ office@de.com.ua î?ś www.de.com.ua Donbasenergo PJSC is a modern power generating company. Its development strategy provides for a successful integration of innovations into the traditional production process.

The Company operates in the thermal electricity generation segment and is an active participant of the energy sector’s reform process aimed at ensuring fulfilment of obligations undertaken by Ukraine as a member of the Energy Community.

Donbasenergo’s priorities are technical re-equipment and compliance of business processes with requirements of international standards in the field of quality management, environmental protection, health and safety, information security etc.

8

Donbasenergo is the first generation in the post-Soviet space that has put into operation a circulating fluidized bed boiler (CFB boiler).

The Company was the first in Eastern Europe to start the construction of new facilities – power units of 330 MW each, including installation of CFB boilers as part of power unit no.6 modernization at Slovyanska TPP. Donbasenergo’s business activities are being built on the principles of proactiveness, economic efficiency and social responsibility, openness and transparency.

9

DTEK B.V. îœŁ 01032 Ukraine, Kyiv, 101 Tower Business Center, 57 Lva Tolstoho Str đ&#x;“ž +380 44 581 45 04 ✉ info@dtek.com î?ś www.dtek.com

Maxim Timchenko,

DTEK is a strategic holding company that is developing four business streams in the energy sector. DTEK Group companies produce coal and natural gas, generate electricity at the fossil-fuelled power plants and renewable energy plants, supply heating and electricity to end consumers and provide energy services. Operating companies – DTEK Energy, DTEK Renewables, DTEK Oil&Gas, DTEK ESCO – directly manage production companies in each of the business streams.

al group System Capital Management (SCM). The shareholder of the group is Rinat Akhmetov.

DTEK is part of the financial and industri-

CEO

The Company is conducting its business in an open and transparent manner. DTEK's Eurobonds are listed on the Irish Stock Exchange.

DTEK actively participates in the activities of European business associations, including Eurelectric and EURACOAL. The Company is a member of the European Business As-

10

sociation and the American Chamber of Commerce, the European-Ukrainian Ener­ gy Agency, and the U.S.-Ukraine Business Council.

The Company follows the principles of sustainable development and is party to the United Nations Global Compact. Building a relationship of trust with the society is vital for the Company, and it is through sustainable social partnership with local authorities and community that a business can achieve it.

KHERSON CCI

(IN PARTNERSHIP WITH ELEMENCO OY) îœŁ Gagarina Str, 34A, Kherson, Ukraine, 73013 đ&#x;“ž +380 552 42 51 19 đ&#x;“ž +380 552 32 52 38 ✉ e-mail: office@tpp.ks.ua î?ś www.tpp.ks.ua

îœŁ Elemenko Oy, Kirjekuorentie 1, 73600 Kaavi, Finland đ&#x;“ž +358 400 72 02 79 đ&#x;“ą +358 40 509 98 19

✉ valdeko.mikheim@elemenco.fi î?ś www.elemenco.fi

Kherson Chamber of Commerce and Industry (KCCI) unites companies, enterprises and institutions seeking for opportunities to expand their manufacturing and trade relations both at home and foreign markets. The KCCI promotes development of Kherson Region economy, contributes to shaping of industrial, financial, trade and scientific policy-making of the Region. We provide Ukrainian and foreign companies with practical assistance for carrying out trade and economic transactions as well as new markets development. The team of the KCCI supports attracting investments to Kherson Region community and asists in investment projects implementation. The Chamber is a co-organizer of International Ecological Forum "Clean City. Clean River. Clean Planet".

Together with local and foreign partners, the Kherson Chamber is actively involved in projects impementing energy efficiency technologies, including training compaigns within Clean Production methodology. One of the latest is "Green School" construction in partnership with Finnish Governmenta, NEFCO, Kherson City Council and "Elemenco OY".

"Elemenco OY" is an enterprise successfully operationg since 2004. It manufactures high quality and energy efficient schools, kinder gartens, assisted-living facilities for elderly people, and other community facilities, as well as office buildings, made of prefabricated wooden-frame modules and elements on the "turn-key" basis (from ground works, construction and assembling to equipment istallation and space planning and furnishing). Such constructions are perfect for the territories and communities where there are difficulties with the centralized power supply and if you want to minimize energy and heat expenses.

11

UKRENERGO

STATE ENTERPRISE | NATIONAL POWER COMPANY

12

îœŁ 25, Petliury Str., Kyiv, 01032 Ukraine đ&#x;“ž +380 44 238 38 25 ✉ inec-kanc@ua.energy î?ś www.ua.energy Ukrenergo National Power Company is the system operator of the Integrated Power System of Ukraine (Ukraine’s IPS), a unitary state enterprise operating in the electricity sector and subordinated to the Ministry of Energy and Coal Industry of Ukraine. Ukraine’s IPS includes: ››power plants of electricity generating companies (14 TPPs, 4 NPPs, 7 HPPs, 3 HPSPPs), and also, 97 CHPPs, small HPPs, WPPs, SPPs and other; ››Ukrenergo’s trunk and interstate power grids; ››electricity distribution networks of regional electricity suppliers (oblenergos). As of 31.12.2016, the aggregate installed capacity of Ukraine’s IPS was 55,331 MW. We oversee: ››real-time balancing of electricity generation and consumption and capacity in the country and regions; ››operation and development of 220-750 kV trunk and interstate power grids; ››simultaneous operation of Ukraine’s IPS with power systems of neighboring countries;

››electricity exports to four EU member states.

The Company’s network includes eight regional power systems, covering the entire territory of Ukraine and employing over 13 thousand persons*.

Our personnel operate unique high-tech equipment at 137** high-voltage (220-750 kV) substations with the aggregate installed capacity of 78.7 thousand MVA and over 21 thousand km of trunk and interstate high-voltage (220750 kV) power transmission lines.

Every year, Ukrenergo’s trunk power grids transmit over 110 billion kWh of electricity.

We invest almost UAH 5 billion a year in the new construction, modernization and improved effectiveness of power grids.

resource-intensive projects. The amount of our credit portfolio for investment projects exceeds UAH 40 billion.

We are actively working on synchronization of Ukraine’s IPS with the European Network of Transmission System Operators for Electricity (ENTSO-E).

In recent years, we have built a number of important facilities, including 330 kV Adzhalyk – Usatove OL, 330 kV Dnistrovska HPSPP – Bar OL and Bar 330 kV SS, Kyivska 750 kV SS and 750 kV Rivnenska NPP – Kyivska SS OL. The purpose and result of these projects were enhancing reliability of electricity supply in certain regions and creating additional capacities at HPSPPs and NPPs. * – due to temporary occupation of the Autonomous republic of Crimea, data regarding Krymska PS is unavailable

We enjoy trust of international financial institutions. We receive financing from the World Bank, European Bank for Reconstruction and Development, European Investment Bank and KfW to implement the largest and most

13

** – 17 substations are located in the temporarily occupied Autonomous Republic of Crimea, and another 17 substations in the areas temporarily uncontrolled by the Government of Ukraine

PJSC “KHERSON COMBINED HEAT AND POWER PLANTâ€? îœŁ Beryslavske shose, 1, Kherson, 73036, Ukraine đ&#x;“ž +380 552 35 24 56 đ&#x;“ž +380 552 35 24 82  +380 552 35 24 42

✉ data@tec.kherson.ua î?ś www.tec.ks.ua

PLANT DESCRIPTION.

PROJECT DESCRIPTION.

Main purpose of the Kherson combined heat and power plant is providing of heat supply of household consumers in Kherson by thermal energy. The Kherson combined heat and power plant is the enterprise with the combined producing of thermal and electric energy – dew producing of thermal energy plant can produce also the electric power, and in a production cycle producing of thermal energy is primary

Considering the risks associated with the use of natural gas as primary fuel, the need to diversify sources of fuels, lower quality requirements for fuel in coal combustion technology using coal combustion in circulating fluidized bed, this technology is our currently priority direction in conversion of the company.

14

Pedchenko Bogdan, Cheaf Executive Officer đ&#x;“ą +380 50 396 18 89 ✉ pedchenko@tec.ks.ua w.elemenco.fi The distinctive feature of the process of coal combustion technology using coal combustion in circulating fluidized bed comparing to others is: the proportion of combustible particles of material in an inert layer is only a few (2-5%) percent of its total mass. It is significant heat accumulated layer of inert particles, and makes it thermally inertial. As a result, changes in fuel properties (calorific value, ash content) is less critical for the process an makes possible to use other coal types available in Ukraine.

KOTLOTURBOPROM UKRAINE îœŁ Kyiv, 01021, 24/7 Institutska St., office 91 đ&#x;“ž +380 44 253 09 03 đ&#x;“ž +380 44 253 71 21  +380 44 253 95 30 Kotloturboprom Enterprise was created within MUST-IPRA Corporation and has been successfully working at the power market of Ukraine and CIS countries since 1998.

The main activity of Kotloturboprom Ltd. is rendering of services for design and construction of new power generation facilities, complex modernization and rehabilitation of TPP boiler and turbine equipment and piping, as well as production and supply of spare parts of power equipment for thermal power plants and heat power plants of industrial enterprises.

THE ENTERPRISE OFFERS WHOLE RANGE OF SERVICES FOR: Technical re-equipment, reconstruction and modernization of energy enterprises and energy supplying facilities: ››Complete examination of energy enterprises and heat- and energy- supply utilities of industrial enterprises in view of the preparation of offers for the prolongation of their life-time, reconstruction and mod-

îœŁ Kharkiv, 61036, Energetychna St., 11 đ&#x;“ž +380 57 719 44 12  +380 57 714 03 17  +380 57 714 08 96 ernization, feasibility studies; ››Development of design and engineering specifications for power equipment to be reconstructed; ››Design and construction of new generating facilities on the basis of combined cycles and traditional steam cycles, including on the premises of existing industrial enterprises; ››Turn-key reconstruction of power equipment of thermal power plants, heat power plants and energy-supplyfacilities of industrial enterprises; ››Complete overhauling of thermal power plants and heat power plants of industrial enterprises to enhance reliability and improve technical and economic ratios and the environmental indices of the power equipment performance; ››Solution of efficient cleaning of exhausting gases and of improvement of the environmental indices of the power equipment performance; complex supply of electric precipitators and modernization of regenerative air heaters.

15

✉ office@ktp.must-ipra.com î?ś www.ktp.must-ipra.com

Supply of power equipment : ››Manufacturing and supply of steam and hot-water boilers, auxiliary power equipment on the base of Kharkov Boiler Mechanical Plant, PLC, and in cooperation with leading power equipment producers of Ukraine, neighboring and far-off countries.

Kotloturboprom Ltd. also offers the creation of  “turnkey� complex automation systems for the automation of commercial and production activity of the enterprises of different size and complexity.

Today Kotloturboprom Ltd. is an equipment supplier to the biggest Ukrainian energy companies, metallurgical, chemical plants and other industrial enterprises.

Kotloturboprom Ltd. guarantees technically accurate and strategically planned offers, which will support your enterprise and create new opportunities for its growth.

For more information, please, refer to our web site http://www.ktp.must-ipra.com.

PASSIVDOM CORP đ&#x;“ž +380 67 506 506 9 đ&#x;“ž +1 650 319 7324 ✉ info@PassivDom.com î?ś www.PassivDom.com

PassivDom: Autonomous Off-the-Grid 3D-Printed Mobile Smart House.

PassivDom is the off-grid house that uses only solar energy for all inhabitants’ needs: climate control (heating and cooling), water generation from air humidity, air quality and carbon dioxide control. House produces PV electricity for all household appliances by itself.

Figure 1: Â PassivDom modulOne 36 sq.m. The roof of the module is fully covered with solar panels.

House frame is produced by industrial 3D-printer robot. Materials used for printing: carbon fiber, fiberglass, polyurethane, resins. All components are nature safe and easy to recycle.

House is fully equipped by all engineering systems: air recuperation system, heat pump for heating and cooling with distance-controlled thermostat hub, air quality medic HEPA system, photovoltaic off-grid  system with LiFePO2 battery, gray water filtration system with heat recovery,  heat energy storage, water tank.

PassivDom is the first in the world mobile transportable house with PassiveHouse parameters.

It is first of-the-grid Passive housing ever, that not needs stable sun orientation, because of PV over productivity even in poor winter insulation in cold climate regions. PassivDom meets Zero Energy House standard and not needs any fuel for heating in cold climate. It is hurricane protected and earthquake safe.

House equipped with all furniture, kitchen, shower and WC. Houses are connected to the

16

online service system for distance monitoring and fault prevention. Energy consumption for heating and air conditioning are less than 8 kW/m² per year in cold climate. The 3D-printed wall have thermal conductivity of the filled material: lambda value = 0.018 W/m²K. Six-layers double-glazed 250 mm windows filled with a mixture of krypton.

SCAD SOFT LTD. îœŁ Kyiv 03037, Ukraine, 3a Osvity street, office. 1,2 đ&#x;“ž +380 44 249 71 93 (91) đ&#x;“ž +380 44 248 80 60 Package SCAD Office v.21 is a set of software products to perform the structural analysis and code-based design for different kinds of building structures. The package SCAD Office includes:

THE MAIN COMPUTING SYSTEM: â€şâ€şâ€œStructure CAD ++â€? (SCAD++) – an integrated computing software for structural analysis based on finite element method intended to solve design problems for rather complex buildings and structures;

THE FOLLOWING SET OF SATELLITE PROGRAMS: ››auxiliary programs which provide the SCAD++ maintenance and enable the following: to create and calculate the geometric properties of bar cross-sections for an arbitrary section as well as for

✉ scad@scadsoft.com î?ś www.scadsoft.com

the standard set of sections; to determine loads and actions on the designed structure as well as load case and design combinations, to calculate the subsoil parameters for the structures on the elastic subgrade; to import initial data from the different architectural computer systems and software; to generate finite element models automatically; ››design and analysis programs, which enable to solve specific problems of analysis and verification of steel, masonry, timber, and reinforced concrete structural members as well as soil and foundation members according to the code requirements; ››design and engineering programs, which are used to develop the design documentation at the stage of the detailed design elaboration.

17

The main computing system SCAD++ includes advanced initial data preparation, modern tools for analysis of calculation results and has almost no limits in sizes and shape of design models.

The set of satellite programs focuses on solving routine design and engineering problems. Its make up the SCAD Office package together with the main computing system itself. The satellite programs are based on the advanced initial and output data display and representation, methods of initial data control, verifications of structural members for compliance with design codes, generation of output documents etc. Any of the programs included in SCAD Office package can be used separately from each others.

LLC "SENSOR ENTERPRISE "ZAVOD RAPID" îœŁ Chernihiv đ&#x;“ž +380 4622 3 23 49 đ&#x;“ž +380 4622 3 16 12 ✉ rapid@mail.cn.ua î?ś www.zavod-rapid.com Our Company specializes in development, production and supplying of sensor and converting equipment, preferably for cosmic carrier rockets and extraterrestrial objects. We produce a variety of temperature sensors and various thermometers; sensors for measuring of static, variable and rapidly-changing pressure; rotary speed sensors; displacement sensors; accelerometers; as well as transducers to convert the signals from sensors into input signals for control systems.

We design and develop the manufacture of various sensors for aircraft motor industry.

TECHNICAL POSSIBILITIES OF OUR PRODUCTION ARE AS FOLLOWS: We have various types of production facilities: ›› Assembling, ››High-precision mechanics, ››Welding fabrication.

Our Assembling production produces and tests sensor and transducer equipment using both universal technology and unique technology.

We perform electronic equipment assembling, its adjustment and tuning, hydraulic and pneumatic tests of the electronic equipment, and special test for equipment for cosmic industry.

18

Our Mechanical Production has a variety of metal-working machinery, both universal and specialized. We produce various details – from plastic to high-precision high-alloy materials.

Our Welding Fabrication has unique working equipment and uses the following specialized technologies: ››Argon-arc welding; ››Microplasmous welding; ››Contact welding; ››Microwelding; ››Carbon-electrode welding.

We weld the following materials: ››High-temperature steels and alloys; ››Aluminum; ››Copper and its alloys; ››Silver, platinum, and gold.

SERGII KHOMENKO’S LAW OFFICE îœŁ 33 Lesi Ukrainky Str. Of. 1 Zhytomyr, Ukraine đ&#x;“ą +380 67 608 54 64 đ&#x;“ą +380 97 990 00 23 đ&#x;“ą +380 68 415 13 65

✉ ab.s.homenko@gmail.com ✉ s.homenko@gmail.com ďŒŽ www.fb.com/ab.s.homenko/ Sergii Khomenko’s Law Office provides services on the edge of classical practice of law and the latest business and psychology trends.

The combination o fthese three components comprises the innovative practice of law.

On the one hand we offer classical legal assistance, while on the other hand, our activity is organized and aimed at providing high quality services in which we implement all the necessary innovative processes. Mediation, conciliation of disputes, compliance, cooperation with a psychologist, copyrights and IT rights protection and advocate storage, application software designed to provide a utomatic customer interaction – this is not the entire list of what you’ll get if working with us. What is more, we work not just with existing issues, but also in advance to be able to avoid them altogether since it is much easier to prevent problems than to solve them later.

As we act entirely in accordance with the quality standards inherent to the legal profession, in turn, we also have responsibilities, but do it “TASTEFULLY�, which is a sign of success-

19

ful business. Such combination enables us to understand the issues which we deal with better. The legal profession is the vocation, the state of mind and the way of life.You, as our customer, need to obtain the deep examination from your legal counsel and that is why we recognize something visible from invisible one – we find little things which play the major part, we predict the following events, and thus develop a strategy for all cases taking into consideration al lthe risks.

Main Types of Activity: ››Business security, compliance ››Mediation, conciliationofdisputes ››Criminal Law ››IT Law, intellectual property ››Lawyerstorage ››Family Law ››Legal advice ››Legal support We appreciate your time, safety and confidentiality rights.

SOLARGAPS INC. Headquarters: SolarGaps Inc. îœŁ 750 Bair Island Rd #302, Redwood City, CA 94063, United States đ&#x;“ž +1 (719) 985 1997 SolarGaps are the world’s first automated solar smart blinds that combine solar panels and blinds and use solar energy to generate electricity for your home or office thus reducing your energy bills.

Unlike other smart blinds on the market, which generate only a small amount of electricity, SolarGaps produces enough electricity to power your devices, thus lowering your energy bill by up to 70%. Once installed over a window – inside or outside your home – the smart blinds with built-in solar panels can instantly generate up to 100150 W or 100-150 Wh in an hour per 10 sq. ft. (≈ 1 m²) of a window, which is enough to power 30 LED light bulbs or three MacBooks. Energy surplus can either be stored in a battery for later use or sold to your electricity company as green energy – for a higher price – although to do this a two-way meter has to be installed by utility.

Backoffice: SolarGaps LLC îœŁ Legal address: 1Đ? – 2 Mahnitohorska street, Kyiv, 02606, Ukraine Showroom: Office 252, 5 Oleny Pchilky street, Kyiv, 02081, Ukraine

đ&#x;“ą +380 50 424 7474 î?ś www.solargaps.com ✉ hello@solargaps.com ďŒŽ www.fb.com/solargaps

SMART FEATURES CUSTOMIZABLE

A SMARTER HOME

SolarGaps are designed to fit a broad range of windows. We have a variety of sizes ranging from Extra Small to Extra Large.

SolarGaps integrates with Google Home and Amazon Echo to enable voice controlled commands, as well as Nest Thermostat to allow your blinds to adjust lighting to heat or cool your home naturally.

ROBUST & DURABLE The outer shell of SolarGaps is made out of a very strong and durable aluminum. Built for all climates, SolarGaps can operate perfectly in the wide range of temperatures – between -40 and + 176 degrees Fahrenheit (-40 and +80 degrees Celsius).

SELF-ADJUSTING To absorb as much solar energy as possible, SolarGaps automatically adjusts the angle of the panels to follow the sun’s position.

20

EASY INSTALLATION You can install SolarGaps yourself by following our simple instructions. Just mount SolarGaps on the wall over your window using the brackets provided.

STATE AGENCY OF UKRAINE ON EXCLUSION ZONE MANAGEMENT îœŁ Kyiv, Lesi Ukrainky 26 street, 01133 đ&#x;“ž +380 44 594 82 42 ✉ dazv@dazv.gov.ua î?ś www.dazv.gov.ua

State Agency of Ukraine on Exclusion Zone Management (SAUEZM) policy on overcoming the consequences of the Chornobyl disaster and establishment of an effective system of state management. The SAUZEM notices its contribution to the establishment of an effective management system by introducing advanced science and technology achievement, the finest international practices and public consensus in Ukraine, creating a favorable

investment climate (for foreign investment) based on objective, transparent and predictable processes which in any case interfere enterprises realization of their responsibility for the safe and efficient operation.

21

State Agency of Ukraine on Exclusion Zone Management (SAUEZM), offer you a jointly developed teaser of the investment project named Chornobyl Solar dealing with the construction of a solar power generation park. The project is under development and expansion.

We invite a wide range of domestic and foreign investors to take part in the project.

RESEARCH AND PRODUCTION ENTERPRISE

“SYNEKOâ€? îœŁ Ukraine, Kharkiv, Moscovsky Avenue, 41 đ&#x;“ž +38 068 734 59 44 đ&#x;“ą +38 067 570 95 90 đ&#x;“ą +38 057 252 60 75

✉ alexsogokon@gmail.com î?ś www.syneko.etov.com.ua Director: Sogokon Oleksandr Borysovich

RPE “Syneko� was founded in 1991, initially as a subsidiary company of the Kharkiv National University named after Karazin, and later it was reorganized into LLC RPE “Syneko�.

The main activity is scientific researches and developments in the field of alternative energy such as solar concentrators, Sterling engines and termoacoustic devices operating on solar energy.

Since 2017 RPE “Synekoâ€? starts working at the industrial production of the: ››Collectors based on the linear concentrators of the solar power with capacity of 8, 4, 2, 1 kilowatt; ››Annular concentrators of the solar energy with a wide range of use; ››Hybrid transformers – solar and wind installations; ››For all developing patented Ukraine, and held an international expert on the PCT system.

All researches have been got Ukrainian patents and the international examination has been hold according to the PCT system.

22

THE UKRAINIAN ENERGY ASSEMBLY, PUBLIC UNION îœŁ 36B Y. Konovaltsya Str., Kyiv, 01133, Ukraine đ&#x;“ž +38 044 499 40 21 The key focus areas of the Union are: ››overall assistance to improvement of current legislation and law acts, regulating energy market, in particular, Regulatory and Tariff policy, to be sure the interests of all Members of the Power sector are considered; ››promoting public monitoring of compliance with legislation and laws by Authorities in terms of energy source materials production, transportation and sale; ››a full support of improvement of technical standards regulating energy companies operations, including the development of National Priority Projects and technical rules; ››offer the recommendations regarding the creation and publishing the standard technical documentations; ››support in implementations of international agreement of Ukraine in Energy sector (within the framework of third Energy

Plachkov Ivan, Chairman đ&#x;“ą +38 067 244 67 69 ✉ iplachkov57@gmail.com

Charter Treaty) for the purpose of considering the interests of all Members the Power sector and public authorities.

Our mission – scientific, technical and organizational support of the energy sector, to ensure effective use of the intellectual and technical potential of scientific and design organizations industry. Saving and support continuity of generations of scientific, technical and industrial professionals, increasing staff potential energy of the country.

BEA Responsibility – an association under the auspices of "Ukrainian Energy Assembly" professionals – Energy, who will share their skills, experience and best practices for restructuring and adaptation model of energy development in the new environment of the state, its integration into the European energy space and energy security Ukraine.

23

GROUP OF COMPANIES

"UKRTEPLO" îœŁ Tropinina str. 5v Kyiv 04107 đ&#x;“ž +380 97 5756371 ✉ pokotiyvi@gmail.com î?ś www.ukrteplo.ua “Ukrteploâ€? is a horizontally integrated group of companies operating in renewable energy.

During six years, it has become one of the largest renewable energy companies in Ukraine. “Ukrteploâ€? has one of the widest networks boiler plants fueled by biomass that includes 110 facilities in 14 regions of Ukraine with a total capacity of 157 MW. Priority areas of activities: ››heat production; ››electricity production; ››production of solid fuel boilers, including collaboration with Kara Energy Systems; ››energy plants; ››bioethanol; ››production of syngas and other innovative technologies.

Investment pool of EUR 260 million.

1. Bioethanol production plant has the capacity of 50 thousand tons per year.

The project will be implemented on the basis of Zaplaza sugar plant which is situated in the southern part of Ukraine. The plant maintains

the necessary infrastructure. The estimated total value of the plant is $4.5 million. The demand of internal market for bioethanol is up to 200 thousand tons per year, while its production in 2015 amounted to 26,5 thousand tons.

Total investments – EUR 90 mln. ROI – 6 years.

generation plant with an electric capacity of 1 MW, a 1 MW thermal power plant running on biogas, and it is planned to install equipment for the production of biogas and a cogeneration plant for the production of electricity and heat.

Total investments – EUR 2,5 mln. ROI – 5 years.

2. Lymanska Windpower Station Project consist of three windfarms. Total capacity 108 MW (3x36 MW). The project area is very close to the port Yuzhnyi. It is very good for transportation of heavy componets of windturbines.

Total investments – EUR 150 mln. ROI – 6 years.

5. Solar Power Plant of Baltskiy region The concept is the construction of a 5 MW electric power generation facility based on the conversion of solar energy into electric power.

Total investments – EUR 5 mln. ROI – 10 years.

3. Udich BIO – TPP The concept is the construction of a 6 MW electric power plant operating on biomass based on the existing CHP plant of the sugar plant.

Total investments – EUR 3,3 mln. ROI – 3 years.

4. ZOLOTONOSHA CHP plant The concept is the construction of a mini co-

Boiler house on biofuel

Centre for cultivation of energy willow

Bioethanol production plant (3D factory model)

Production of solid fuel boilers

24

6. ZAPALZA TTP The concept is the construction of a 12 MW TPP with a 12 MW biomass power plant based on the existing CHP plant of the former Zaplaz sugar plant.

The necessary infrastructure remained at the plant: buildings with a total area of ​​20 thousand square meters; A pond with an area of​​ 16 hectares with the possibility of water intake of 10,400 m³ per day; railway line 5.5 km long.

Total investments – EUR 7,8 mln. ROI – 4 years.

UKRAINIAN WIND ENERGY ASSOCIATION îœŁ 39/41 Shota Rustaveli, Kyiv 01033, Ukraine đ&#x;“ž +380 44 223 29 96 ✉ uwea@i.ua î?ś www.uwea.com.ua Public Union “Ukrainian Wind Energy Associationâ€? (UWEA) is a non-profit organisation aimed at promoting wind energy technologies and ensuring wind energy industry’s interests on the national and international levels.

UWEA brings together wind power project developers, wind power equipment manufacturers and suppliers, utilities, construction companies, scientists and researches, lawyers, NGOs, consumers and others involved in the wind industry – one of the world’s fastest growing energy industries.

The Ukrainian Wind Energy Association cooperates with various national and international authorities and organisations. The UWEA contributes greatly to information and experience exchange with all stakeholders. Ever since its foundation in spring 2008, the UWEA has been actively defended the interests of the Ukrainian wind energy industry through

participation in various working groups to develop the legislation and strategic documents for the energy sector of Ukraine.

Wind energy – is the path to peace. UWEA's mission is to strengthen wind power market, technology and infrastructure growth in Ukraine and worldwide through effective participation in the decision-making process, through advocacy, communication and education. The UWEA is governed by a Board which is currently headed by Andriy Konechenkov, Vice President of the WWEA, Head of the CIS Wind Committee.

UWEA is a member of the World Wind Energy Association and the European association WindEurope The UWEA is a proven, effective advocate for wind industry and it continues to mature along with the industry.

25

UKRAINIAN WIND POWER SECTOR

2016

UKRAINIAN EXPOSITION ASTANA EXPO 2017 JUNE 10 – SEPTEMBER 10, 2017